In connect_server(), if we looked for an usable connection and failed to
find one, srv_conn won't be NULL at the end of list_for_each_entry(), but
will point to the head of a list, which is not a pointer to a struct
connection, so explicitely set it to NULL.
This should be backported to 1.9.
If, for some reason we failed to allocate a conn_stream when reusing an
existing connection, set srv_conn to NULL, so that we fail later, instead
of pretending all is right. This ends up giving a stream_interface with
no endpoint, and so the stream will never end.
This should be backported to 1.9.
In connect_server(), don't attempt to reuse the old connection if it's
targetting a different server than the one we're supposed to access, or
we will never be able to connect to a server if the first one we tried failed.
This should be backported to 1.9.
There was a reference to struct stream in conn_free() for the case
where we're freeing a connection that doesn't have a mux attached.
For now we know it's always a stream, and we only need to do it to
put a NULL in s->si[1].end.
Let's do it better by storing the pointer to si[1].end in the context
and specifying that this pointer is always nulled if the mux is null.
This way it allows a connection to detach itself from wherever it's
being used. Maybe we could even get rid of the condition on the mux.
We most often store the mux context there but it can also be something
else while setting up the connection. Better call it "ctx" and know
that it's the owner's context than misleadingly call it mux_ctx and
get caught doing suspicious tricks.
Add the newly created to the idle list as long as http-reuse != never, and
when completing a H2 request, add the connection to the safe list instead of
the idle list, if we have to add it at that point, that means we created
many streams so we know it's safe.
In session, don't keep an infinite number of connection that can idle.
Add a new frontend parameter, "max-session-srv-conns" to set a max number,
with a default value of 5.
Instead of trying to get the session from the connection, which is not
always there, and of course there could be multiple sessions per connection,
provide it with the init() and attach() methods, so that we know the
session for each outgoing stream.
Add a new command, "pool-max-conn" that sets the maximum number of connections
waiting in the orphan idling connections list (as activated with idle-timeout).
Using "-1" means unlimited. Using pools is now dependant on this.
PiBa-NL reported that since this commit f157384 ("MINOR: backend: count
the number of connect and reuse per server and per backend"), reg-test
connection/h00001 fails. Indeed it does, the server is not checked for
existing prior to updating its counter. It should also fail with
transparent mode.
Sadly we didn't have the cumulated number of connections established to
servers till now, so let's now update it per backend and per-server and
report it in the stats. On the stats page it appears in the tooltip
when hovering over the total sessions count field.
Add a new method to mux, "reset", that is used to let the mux know the
connection attempt failed, and we're about to retry, so it just have to
reinit itself. Currently only the H1 mux needs it.
CS_FL_EOS | CS_FL_REOS can be set by the mux if the connection failed, so make
sure we remove them before retrying to connect, or it may lead to a premature
close of the connection.
In connect_server(), don't attempt to reuse the conn_stream associated to
the stream_interface, if we already attempted a connection with it.
Using that conn_stream is only there for the cases where a connection and
a conn_stream was created ahead, mostly by http_proxy or by the LUA code.
If we already attempted to connect, that means we fail, and so we should
create a new connection.
No backport needed.
In connect_server(), if we already have a conn_stream, reuse it
instead of trying to create a new one. http_proxy and LUA both
manually create a conn_stream and a connection, and we want
to use it.
Add a new keyword for servers, "idle-timeout". If set, unused connections are
kept alive until the timeout happens, and will be picked for reuse if no
other connection is available.
http_proxy is special, because it creates its connection and conn_stream
earlier. So in assign_server(), check that the connection associated with
the conn_stream has a destination address set, and in connect_server(),
use the connection and the conn_stream already attached to the
stream_interface, instead of looking for a connection in the session, and
creating a new conn_stream.
Instead of parsing all the available connections owned by the session
each time we choose a server, even if prefer-last-server is not set,
just do it if prefer-last-server is used, and check if the server is usable,
before checking the connections.
Instead of just storing the last connection in the session, store all of
the connections, for at most MAX_SRV_LIST (currently 5) targets.
That way we can do keepalive on more than 1 outgoing connection when the
client uses HTTP/2.
When creating a new outgoing H2 connection, put it in the idle list so that
it's immediately available for others to use, if http-reuse always is used.
When we're deferring the mux choice until the ALPN is negociated, we
attach the connection to the stream_interface until it's done, so that we
can destroy it if something goes wrong and the stream is destroy.
Before calling si_attach_cs() to attach the conn_stream once we have it,
call si_detach_endpoint(), or is_attach_cs() would destroy the connection.
When we defer the mux choice until the ALPN is negociated, don't forget
to wake the stream once it's done, or it will never have the opportunity
to send data.
This switches explicit calls to various trivial registration methods for
keywords, muxes or protocols from constructors to INITCALL1 at stage
STG_REGISTER. All these calls have in common to consume a single pointer
and return void. Doing this removes 26 constructors. The following calls
were addressed :
- acl_register_keywords
- bind_register_keywords
- cfg_register_keywords
- cli_register_kw
- flt_register_keywords
- http_req_keywords_register
- http_res_keywords_register
- protocol_register
- register_mux_proto
- sample_register_convs
- sample_register_fetches
- srv_register_keywords
- tcp_req_conn_keywords_register
- tcp_req_cont_keywords_register
- tcp_req_sess_keywords_register
- tcp_res_cont_keywords_register
- flt_register_keywords
In commit c7566001 ("MINOR: server: Add "alpn" and "npn" keywords") and
commit 201b9f4e ("MAJOR: connections: Defer mux creation for outgoing
connection if alpn is set"), the build was broken on older OpenSSL
releases.
Move the #ifdef's around so that we build again with older OpenSSL
releases (0.9.8 was tested).
When we create a connection, if we have to defer the conn_stream and the
mux creation until we can decide it (ie until the SSL handshake is done, and
the ALPN is decided), store the connection in the stream_interface, so that
we're sure we can destroy it if needed.
The creation of the conn_stream for an outgoing connection has been delayed
a bit, and when using dispatch, a check was made to see if a conn_stream
was attached before the conn_stream was created, so remove the test, as
it's done later anyway, and create and install the conn_stream right away
when we don't have a server, as is done when we don't have an alpn/npn
defined.
If an ALPN (or a NPN) was chosen for a server, defer choosing the mux until
after the SSL handshake is done, and the ALPN/NPN has been negociated, so
that we know which mux to pick.
Do not destroy the connection when we're about to destroy a stream. This
prevents us from doing keepalive on server connections when the client is
using HTTP/2, as a new stream is created for each request.
Instead, the session is now responsible for destroying connections.
When reusing connections, the attach() mux method is now used to create a new
conn_stream.
Instead of trying to receive as soon as the connection is created, and to
eventually have to transfer subscription if we move connections, wait
until the connection is established before attempting to recv.
Commit 85b73e9 ("BUG/MEDIUM: stream: Make sure polling is right on retry.")
introduced a possible null dereference on the error path detected by gcc-7.
Let's simply assign srv_conn after checking the error and not before.
No backport is needed.
While "option prefer-last-server" only applies to non-deterministic load
balancing algorithms, 401/407 responses actually caused haproxy to prefer
the last server unconditionally.
As this breaks deterministic load balancing algorithms like uri, this
patch applies the same condition here.
Should be backported to 1.8 (together with "BUG/MINOR: only mark
connections private if NTLM is detected").
When retrying to connect to a server, because the previous connection failed,
make sure if we subscribed to the previous connection, the polling flags will
be true for the new fd.
No backport is needed.
The return value from conn_install_mux() was not checked, so if an
inconsistency happens in the code, or a memory allocation fails while
initializing the mux, we can crash while using an uninitialized mux.
In practice the code inconsistency does not really happen since we
cannot configure such a situation, except during development, but
the out of memory condition could definitely happen.
This should be backported to 1.8 (the code is a bit different there,
there are two calls to conn_install_mux()).
This adds the sample fetch 'be_conn_free([<backend>])'. This sample fetch
provides the total number of unused connections across available servers in the
specified backend.
To do so, mux choices are split to handle incoming and outgoing connections in a
different way. The protocol specified on the bind/server line is used in
priority. Then, for frontend connections, the ALPN is retrieved and used to
choose the best mux. For backend connection, there is no ALPN. Finaly, if no
protocol is specified and no protocol matches the ALPN, we fall back on a
default mux, choosing in priority the first mux with exactly the same mode.
The comment above the change remains true. We assume there is always 1
conn_stream per outgoing connectionq. Today, it is always true because H2 is not
supported yet for server connections.
It remained some fragments of the old buffers API in debug messages, here and
there.
This was caused by the recent buffer API changes, no backport is needed.
Chunks are only a subset of a buffer (a non-wrapping version with no head
offset). Despite this we still carry a lot of duplicated code between
buffers and chunks. Replacing chunks with buffers would significantly
reduce the maintenance efforts. This first patch renames the chunk's
fields to match the name and types used by struct buffers, with the goal
of isolating the code changes from the declaration changes.
Most of the changes were made with spatch using this coccinelle script :
@rule_d1@
typedef chunk;
struct chunk chunk;
@@
- chunk.str
+ chunk.area
@rule_d2@
typedef chunk;
struct chunk chunk;
@@
- chunk.len
+ chunk.data
@rule_i1@
typedef chunk;
struct chunk *chunk;
@@
- chunk->str
+ chunk->area
@rule_i2@
typedef chunk;
struct chunk *chunk;
@@
- chunk->len
+ chunk->data
Some minor updates to 3 http functions had to be performed to take size_t
ints instead of ints in order to match the unsigned length here.
Now the buffers only contain the header and a pointer to the storage
area which can be anywhere. This will significantly simplify buffer
swapping and will make it possible to map chunks on buffers as well.
The buf_empty variable was removed, as now it's enough to have size==0
and area==NULL to designate the empty buffer (thus a non-allocated head
is the empty buffer by default). buf_wanted for now is indicated by
size==0 and area==(void *)1.
The channels and the checks now embed the buffer's head, and the only
pointer is to the storage area. This slightly increases the unallocated
buffer size (3 extra ints for the empty buffer) but considerably
simplifies dynamic buffer management. It will also later permit to
detach unused checks.
The way the struct buffer is arranged has proven quite efficient on a
number of tests, which makes sense given that size is always accessed
and often first, followed by the othe ones.
These ones manipulate the output data count which will be specific to
the channel soon, so prepare the call points to use the channel only.
The b_* functions are now unused and were removed.
