When an embryonic session is killed, if no log format is defined for this
error, a generic error is emitted. When this happens, we now rely on the
session to get the client source address. For now, session addresses are
never set. So, thanks to the fallback mechanism, no changes are expected
with this patch. But its purpose is to rely on addresses at the session
level when set instead of those at the connection level.
For now, these addresses are never set. But the idea is to be able to set
client source and destination addresses at the session level without
updating the connection ones.
Functions to fill these addresses have been added: sess_get_src() and
sess_get_dst(). If not already set, these functions relies on
conn_get_src() and conn_get_dst() to fill session addresses.
And just like for conncetions, sess_src() and sess_dst() may be used to get
source and destination addresses. However, if not set, the corresponding
address from the underlying client connection is returned. When this
happens, the addresses is filled in the connection object.
We'll need to improve the API to pass other arguments in the future, so
let's start to adapt better to the current use cases. task_new() is used:
- 18 times as task_new(tid_bit)
- 18 times as task_new(MAX_THREADS_MASK)
- 2 times with a single bit (in a loop)
- 1 in the debug code that uses a mask
This patch provides 3 new functions to achieve this:
- task_new_here() to create a task on the calling thread
- task_new_anywhere() to create a task to be run anywhere
- task_new_on() to create a task to run on a specific thread
The change is trivial and will allow us to later concentrate the
required adaptations to these 3 functions only. It's still possible
to call task_new() if needed but a comment was added to encourage the
use of the new ones instead. The debug code was not changed and still
uses it.
The vars_init() name is particularly confusing as it does not initialize
the variables code but the head of a list of variables passed in
arguments. And we'll soon need to have proper initialization code, so
let's rename it now.
This option can be used to define a specific log format that will be
used in case of error, timeout, connection failure on a frontend... It
will be used for any log line concerned by the log-separate-errors
option. It will also replace the format of specific error messages
decribed in section 8.2.6.
If no "error-log-format" is defined, the legacy error messages are still
emitted and the other error logs keep using the regular log-format.
Rename the 'dontloglegacyconnerr' option to 'log-error-via-logformat'
which is much more self-explanatory and readable.
Note: only legacy keywords don't use hyphens, it is recommended to
separate words with them in new keywords.
In case of connection failure, a dedicated error message is output,
following the format described in section "Error log format" of the
documentation. These messages cannot be configured through a log-format
option.
This patch adds a new option, "dontloglegacyconnerr", that disables
those error logs when set, and "replaces" them by a regular log line
that follows the configured log-format (thanks to a call to sess_log in
session_kill_embryonic).
The new fc_conn_err sample fetch allows to add the legacy error log
information into a regular log format.
This new option is unset by default so the logging logic will remain the
same until this new option is used.
This patch replaces all advanced data type aliases on
stktable_data_cast calls by standard types.
This way we could call the same stktable_data_cast
regardless of the used advanced data type as long they
are using the same std type.
It also removes all the advanced data type aliases.
This patch replaces roughly all occurrences of an HA_ATOMIC_ADD(&foo, 1)
or HA_ATOMIC_SUB(&foo, 1) with the equivalent HA_ATOMIC_INC(&foo) and
HA_ATOMIC_DEC(&foo) respectively. These are 507 changes over 45 files.
No need to keep this flag apart any more, let's merge it into the global
state. The CLI's output state was extended to 6 digits and the linger/cloned
flags moved inside the parenthesis.
Introduce a new XPRT method, start(). The init() method will now only
initialize whatever is needed for the XPRT to run, but any action the XPRT
has to do before being ready, such as handshakes, will be done in the new
start() method. That way, we will be sure the full stack of xprt will be
initialized before attempting to do anything.
The init() call is also moved to conn_prepare(). There's no longer any reason
to wait for the ctrl to be ready, any action will be deferred until start(),
anyway. This means conn_xprt_init() is no longer needed.
It's been too short for quite a while now and is now full. It's still
time to extend it to 32-bits since we have room for this without
wasting any space, so we now gained 16 new bits for future flags.
The values were not reassigned just in case there would be a few
hidden u16 or short somewhere in which these flags are placed (as
it used to be the case with stream->pending_events).
The patch is tagged MEDIUM because this required to update the task's
process() prototype to use an int instead of a short, that's quite a
bunch of places.
In session_count_new() the tracked counter was still incremented with
a "++" outside of any lock, resulting in occasional slightly off values
such as the following:
# table: foo, type: string, size:1000, used:1
0xb2a398: key=127.1.2.3 use=0 exp=86398318 sess_cnt=999959 http_req_cnt=1000004
Now with the correct atomic increment:
# table: foo, type: string, size:1000, used:1
0x7f82a4026d38: key=127.1.2.3 use=0 exp=86399294 sess_cnt=1000004 http_req_cnt=1000004
This can be backported to 1.8.
The idle duration between two streams is added to the session structure. It
is not necessarily pertinent on all protocols. In fact, it is only defined
for H1 connections. It is the duration between two H1 transactions. But the
.get_cs_info() callback function on the multiplexers only exists because
this duration is missing at the session level. So it is a simplification
opportunity for a really low cost.
To reduce the cost, a hole in the session structure is filled by moving
.srv_list field at the end of the structure.
Baptiste reported a new crash affecting 2.3 which can be triggered
when using H2 on the backend, with http-reuse always and with a tens
of clients doing close only. There are a few combined cases which cause
this to happen, but each time the issue is the same, an already freed
session is dereferenced in session_unown_conn().
Two cases were identified to cause this:
- a connection referencing a session as its owner, which is detached
from the session's list and is destroyed after this session ends.
The test on conn->owner before calling session_unown_conn() is not
sufficent as the pointer is not null but is not valid anymore.
- a connection that never goes idle and that gets killed form the
mux, where session_free() is called first, then conn_free() calls
session_unown_conn() which scans the just freed session for older
connections. This one is only triggered with DEBUG_UAF
The reason for this session to be present here is that it's needed during
the connection setup, to be passed to conn_install_mux_be() to mux->init()
as the owning session, but it's never deleted aftrewards. Furthermore, even
conn_session_free() doesn't delete this pointer after freeing the session
that lies there. Both do definitely result in a use-after-free that's more
easily triggered under DEBUG_UAF.
This patch makes sure that the owner is always deleted after detaching
or killing the session. However it is currently not possible to clear
the owner right after a synchronous init because the proxy protocol
apparently needs it (a reg test checks this), and if we leave it past
the connection setup with the session not attached anywhere, it's hard
to catch the right moment to detach it. This means that the session may
remain in conn->owner as long as the connection has never been added to
nor removed from the session's idle list. Given that this patch needs to
remain simple enough to be backported, instead it adds a workaround in
session_unown_conn() to detect that the element is already not attached
anywhere.
This fix absolutely requires previous patch "CLEANUP: connection: do not
use conn->owner when the session is known" otherwise the situation will
be even worse, as some places used to rely on conn->owner instead of the
session.
The fix could theorically be backported as far as 1.8. However, the code
in this area has significantly changed along versions and there are more
risks of breaking working stuff than fixing real issues there. The issue
was really woken up in two steps during 2.3-dev when slightly reworking
the idle conns with commit 08016ab82 ("MEDIUM: connection: Add private
connections synchronously in session server list") and when adding
support for storing used H2 connections in the session and adding the
necessary call to session_unown_conn() in the muxes. But the same test
managed to crash 2.2 when built in DEBUG_UAF and patched like this,
proving that we used to already leave dangling pointers behind us:
| diff --git a/include/haproxy/connection.h b/include/haproxy/connection.h
| index f8f235c1a..dd30b5f80 100644
| --- a/include/haproxy/connection.h
| +++ b/include/haproxy/connection.h
| @@ -458,6 +458,10 @@ static inline void conn_free(struct connection *conn)
| sess->idle_conns--;
| session_unown_conn(sess, conn);
| }
| + else {
| + struct session *sess = conn->owner;
| + BUG_ON(sess && sess->origin != &conn->obj_type);
| + }
|
| sockaddr_free(&conn->src);
| sockaddr_free(&conn->dst);
It's uncertain whether an existing code path there can lead to dereferencing
conn->owner when it's bad, though certain suspicious memory corruption bugs
make one think it's a likely candidate. The patch should not be hard to
adapt there.
Backports to 2.1 and older are left to the appreciation of the person
doing the backport.
A reproducer consists in this:
global
nbthread 1
listen l
bind :9000
mode http
http-reuse always
server s 127.0.0.1:8999 proto h2
frontend f
bind :8999 proto h2
mode http
http-request return status 200
Then this will make it crash within 2-3 seconds:
$ h1load -e -r 1 -c 10 http://0:9000/
If it does not, it might be that DEBUG_UAF was not used (it's harder then)
and it might be useful to restart.
Now that this function is always called with an initialized connection
and that the control layer is always initialized, we don't need to play
games with fdtab[] to decide how to close, we can simply rely on the
regular close path using conn_ctrl_close(), which can be fused with
conn_xprt_close() into conn_full_close().
The code is cleaner because the FD is now used only for some
protocol-specific setup (that will eventually have to move) and to
try to send a hard-coded HTTP 500 error message on raw sockets.
Till now we would keep a per-thread queue of pending incoming connections
for which we would store:
- the listener
- the accepted FD
- the source address
- the source address' length
And these elements were first used in session_accept_fd() running on the
target thread to allocate a connection and duplicate them again. Doing
this induces various problems. The first one is that session_accept_fd()
may only run on file descriptors and cannot be reused for QUIC. The second
issue is that it induces lots of memory copies and that the listerner
queue thrashes a lot of cache, consuming 64 bytes per entry.
This patch changes this by allocating the connection before queueing it,
and by only placing the connection's pointer into the queue. Indeed, the
first two calls used to initialize the connection already store all the
information above, which can be retrieved from the connection pointer
alone. So we just have to pop one pointer from the target thread, and
pass it to session_accept_fd() which only needs the FD for the final
settings.
This starts to make the accept path a bit more transport-agnostic, and
saves memory and CPU cycles at the same time (1% connection rate increase
was noticed with 4 threads). Thanks to dividing the accept-queue entry
size from 64 to 8 bytes, its size could be increased from 256 to 1024
connections while still dividing the overall size by two. No single
queue full condition was met.
One minor drawback is that connection may be allocated from one thread's
pool to be used into another one. But this already happens a lot with
connection reuse so there is really nothing new here.
Roughly half of the calls to sockadr_alloc() are made to copy an already
known address. Let's optionally pass it in argument so that the function
can handle the copy at the same time, this slightly simplifies its usage.
As discussed here during 2.1-dev, "monitor-net" is totally obsolete:
https://www.mail-archive.com/haproxy@formilux.org/msg35204.html
It's fundamentally incompatible with usage of SSL, and imposes the
presence of file descriptors with hard-coded syscalls directly in the
generic accept path.
It's very unlikely that anyone has used it in the last 10 years for
anything beyond testing. In the worst case if anyone would depend
on it, replacing it with "http-request return status 200 if ..." and
"mode http" would certainly do the trick.
The keyword is still detected as special by the config parser to help
users update their configurations appropriately.
As discussed here during 2.1-dev, "mode health" is totally obsolete:
https://www.mail-archive.com/haproxy@formilux.org/msg35204.html
It's fundamentally incompatible with usage of SSL, doesn't support
source filtering, and imposes the presence of file descriptors with
hard-coded syscalls directly in the generic accept path.
It's very unlikely that anyone has used it in the last 10 years for
anything beyond testing. In the worst case if anyone would depend
on it, replacing it with "http-request return status 200" and "mode
http" would certainly do the trick.
The keyword is still detected as special by the config parser to help
users update their configurations appropriately.
Some socket settings used to be retrieved via the listener and the
bind_conf. Now instead we use the receiver and its settings whenever
appropriate. This will simplify the removal of the dependency on the
listener.
The receiver is the one which depends on the protocol while the listener
relies on the receiver. Let's move the protocol there. Since there's also
a list element to get back to the listener from the proto list, this list
element (proto_list) was moved as well. For now when scanning protos, we
still see listeners which are linked by their rx.proto_list part.
The netns is common to all listeners/receivers and is used to bind the
listening socket so it must be in the receiver settings and not in the
listener. This removes some yet another set of unnecessary loops.
When a new connection is created, its target is always set just after. So the
connection target may set when it is created instead, during its initialisation
to be precise. It is the purpose of this patch. Now, conn_new() function is
called with the connection target as parameter. The target is then passed to
conn_init(). It means the target must be passed when cs_new() is called. In this
case, the target is only used when the conn-stream is created with no
connection. This only happens for tcpchecks for now.
Previous commit b24bc0d ("MINOR: tcp: Support TCP keepalive parameters
customization") broke non-Linux builds as TCP_KEEP{CNT,IDLE,INTVL} are
not necessarily defined elsewhere.
This patch adds the required #ifdefs to condition the visibility of the
keywords, and adds a mention in the doc about their dependency on Linux.
It is now possible to customize TCP keepalive parameters.
These correspond to the socket options TCP_KEEPCNT, TCP_KEEPIDLE, TCP_KEEPINTVL
and are valid for the defaults, listen, frontend and backend sections.
This patch fixes GitHub issue #670.
This one was not easy because it was embarking many includes with it,
which other files would automatically find. At least global.h, arg.h
and tools.h were identified. 93 total locations were identified, 8
additional includes had to be added.
In the rare files where it was possible to finalize the sorting of
includes by adjusting only one or two extra lines, it was done. But
all files would need to be rechecked and cleaned up now.
It was the last set of files in types/ and proto/ and these directories
must not be reused anymore.
This one is particularly difficult to split because it provides all the
functions used to manipulate a proxy state and to retrieve names or IDs
for error reporting, and as such, it was included in 73 files (down to
68 after cleanup). It would deserve a small cleanup though the cut points
are not obvious at the moment given the number of structs involved in
the struct proxy itself.
The current state of the logging is a real mess. The main problem is
that almost all files include log.h just in order to have access to
the alert/warning functions like ha_alert() etc, and don't care about
logs. But log.h also deals with real logging as well as log-format and
depends on stream.h and various other things. As such it forces a few
heavy files like stream.h to be loaded early and to hide missing
dependencies depending where it's loaded. Among the missing ones is
syslog.h which was often automatically included resulting in no less
than 3 users missing it.
Among 76 users, only 5 could be removed, and probably 70 don't need the
full set of dependencies.
A good approach would consist in splitting that file in 3 parts:
- one for error output ("errors" ?).
- one for log_format processing
- and one for actual logging.
The type file is becoming a mess, half of it is for the proxy protocol,
another good part describes conn_streams and mux ops, it would deserve
being split again. At least it was reordered so that elements are easier
to find, with the PP-stuff left at the end. The MAX_SEND_FD macro was moved
to compat.h as it's said to be the value for Linux.
global.h was one of the messiest files, it has accumulated tons of
implicit dependencies and declares many globals that make almost all
other file include it. It managed to silence a dependency loop between
server.h and proxy.h by being well placed to pre-define the required
structs, forcing struct proxy and struct server to be forward-declared
in a significant number of files.
It was split in to, one which is the global struct definition and the
few macros and flags, and the rest containing the functions prototypes.
The UNIX_MAX_PATH definition was moved to compat.h.
So the enums and structs were placed into http-t.h and the functions
into http.h. This revealed that several files were dependeng on http.h
but not including it, as it was silently inherited via other files.
The pretty confusing "buffer.h" was in fact not the place to look for
the definition of "struct buffer" but the one responsible for dynamic
buffer allocation. As such it defines the struct buffer_wait and the
few functions to allocate a buffer or wait for one.
This patch moves it renaming it to dynbuf.h. The type definition was
moved to its own file since it's included in a number of other structs.
Doing this cleanup revealed that a significant number of files used to
rely on this one to inherit struct buffer through it but didn't need
anything from this file at all.
Now the file is ready to be stored into its final destination. A few
minor reorderings were performed to keep the file properly organized,
making the various sections more visible (cache & lockless).
In addition and to stay consistent, memory.c was renamed to pool.c.
This one used to be stored into debug.h but the debug tools got larger
and require a lot of other includes, which can't use BUG_ON() anymore
because of this. It does not make sense and instead this macro should
be placed into the lower includes and given its omnipresence, the best
solution is to create a new bug.h with the few surrounding macros needed
to trigger bugs and place assertions anywhere.
Another benefit is that it won't be required to add include <debug.h>
anymore to use BUG_ON, it will automatically be covered by api.h. No
less than 32 occurrences were dropped.
The FSM_PRINTF macro was dropped since not used at all anymore (probably
since 1.6 or so).
All files that were including one of the following include files have
been updated to only include haproxy/api.h or haproxy/api-t.h once instead:
- common/config.h
- common/compat.h
- common/compiler.h
- common/defaults.h
- common/initcall.h
- common/tools.h
The choice is simple: if the file only requires type definitions, it includes
api-t.h, otherwise it includes the full api.h.
In addition, in these files, explicit includes for inttypes.h and limits.h
were dropped since these are now covered by api.h and api-t.h.
No other change was performed, given that this patch is large and
affects 201 files. At least one (tools.h) was already freestanding and
didn't get the new one added.
HTTP health-checks are now internally based on tcp-checks. Of course all the
configuration parsing of the "http-check" keyword and the httpchk option has
been rewritten. But the main changes is that now, as for tcp-check ruleset, it
is possible to perform several send/expect sequences into the same
health-checks. Thus the connect rule is now also available from HTTP checks, jst
like set-var, unset-var and comment rules.
Because the request defined by the "option httpchk" line is used for the first
request only, it is now possible to set the method, the uri and the version on a
"http-check send" line.
Make it so sessions are not responsible for connection anymore, except for
connections that are private, and thus can't be shared, otherwise, as soon
as a request is done, the session will just add the connection to the
orphan connections pool.
This will break http-reuse safe, but it is expected to be fixed later.
As mentioned in commit c192b0ab95 ("MEDIUM: connection: remove
CO_FL_CONNECTED and only rely on CO_FL_WAIT_*"), there is a lack of
consistency on which flags are checked among L4/L6/HANDSHAKE depending
on the code areas. A number of sample fetch functions only check for
L4L6 to report MAY_CHANGE, some places only check for HANDSHAKE and
many check both L4L6 and HANDSHAKE.
This patch starts to make all of this more consistent by introducing a
new mask CO_FL_WAIT_XPRT which is the union of L4/L6/HANDSHAKE and
reports whether the transport layer is ready or not.
All inconsistent call places were updated to rely on this one each time
the goal was to check for the readiness of the transport layer.
Commit 477902bd2e ("MEDIUM: connections: Get ride of the xprt_done
callback.") broke the master CLI for a very obscure reason. It happens
that short requests immediately terminated by a shutdown are properly
received, CS_FL_EOS is correctly set, but in si_cs_recv(), we refrain
from setting CF_SHUTR on the channel because CO_FL_CONNECTED was not
yet set on the connection since we've not passed again through
conn_fd_handler() and it was not done in conn_complete_session(). While
commit a8a415d31a ("BUG/MEDIUM: connections: Set CO_FL_CONNECTED in
conn_complete_session()") fixed the issue, such accident may happen
again as the root cause is deeper and actually comes down to the fact
that CO_FL_CONNECTED is lazily set at various check points in the code
but not every time we drop one wait bit. It is not the first time we
face this situation.
Originally this flag was used to detect the transition between WAIT_*
and CONNECTED in order to call ->wake() from the FD handler. But since
at least 1.8-dev1 with commit 7bf3fa3c23 ("BUG/MAJOR: connection: update
CO_FL_CONNECTED before calling the data layer"), CO_FL_CONNECTED is
always synchronized against the two others before being checked. Moreover,
with the I/Os moved to tasklets, the decision to call the ->wake() function
is performed after the I/Os in si_cs_process() and equivalent, which don't
care about this transition either.
So in essence, checking for CO_FL_CONNECTED has become a lazy wait to
check for (CO_FL_WAIT_L4_CONN | CO_FL_WAIT_L6_CONN), but that always
relies on someone else having synchronized it.
This patch addresses it once for all by killing this flag and only checking
the two others (for which a composite mask CO_FL_WAIT_L4L6 was added). This
revealed a number of inconsistencies that were purposely not addressed here
for the sake of bisectability:
- while most places do check both L4+L6 and HANDSHAKE at the same time,
some places like assign_server() or back_handle_st_con() and a few
sample fetches looking for proxy protocol do check for L4+L6 but
don't care about HANDSHAKE ; these ones will probably fail on TCP
request session rules if the handshake is not complete.
- some handshake handlers do validate that a connection is established
at L4 but didn't clear CO_FL_WAIT_L4_CONN
- the ->ctl method of mux_fcgi, mux_pt and mux_h1 only checks for L4+L6
before declaring the mux ready while the snd_buf function also checks
for the handshake's completion. Likely the former should validate the
handshake as well and we should get rid of these extra tests in snd_buf.
- raw_sock_from_buf() would directly set CO_FL_CONNECTED and would only
later clear CO_FL_WAIT_L4_CONN.
- xprt_handshake would set CO_FL_CONNECTED itself without actually
clearing CO_FL_WAIT_L4_CONN, which could apparently happen only if
waiting for a pure Rx handshake.
- most places in ssl_sock that were checking CO_FL_CONNECTED don't need
to include the L4 check as an L6 check is enough to decide whether to
wait for more info or not.
It also becomes obvious when reading the test in si_cs_recv() that caused
the failure mentioned above that once converted it doesn't make any sense
anymore: having CS_FL_EOS set while still waiting for L4 and L6 to complete
cannot happen since for CS_FL_EOS to be set, the other ones must have been
validated.
Some of these parts will still deserve further cleanup, and some of the
observations above may induce some backports of potential bug fixes once
totally analyzed in their context. The risk of breaking existing stuff
is too high to blindly backport everything.
We can't just assume conn_create_mux() will be called, and set CO_FL_CONNECTED,
conn_complete_session() might be call synchronously if we're not using SSL,
so ew haee no choice but to set CO_FL_CONNECTED in there. This should fix
the recent breakage of the mcli reg tests.
The xprt_done_cb callback was used to defer some connection initialization
until we're connected and the handshake are done. As it mostly consists of
creating the mux, instead of using the callback, introduce a conn_create_mux()
function, that will just call conn_complete_session() for frontend, and
create the mux for backend.
In h2_wake(), make sure we call the wake method of the stream_interface,
as we no longer wakeup the stream task.
In session_accept_fd() we can perform a synchronous call to
conn_complete_session() and if it succeeds the connection is accepted
and turned into a session. If it fails we take it as an error while it
is not, in this case, it's just that a tcp-request rule has decided to
reject the incoming connection. The problem with reporting such an event
as an error is that the failed status is passed down to the listener code
which decides to disable accept() for 100ms in order to leave some time
for transient issues to vanish, and that's not what we want to do here.
This fix must be backported as far as 1.7. In 1.7 the code is a bit
different as tcp_exec_l5_rules() is called directly from within
session_new_fd() and ret=0 must be assigned there.
