There are two types of retries when performing a DNS resolution:
1. retry because of a timeout
2. retry of the full sequence of requests (query types failover)
Before this patch, the 'resolution->try' counter was incremented
after each send of a DNS request, which does not cover the 2 cases
above.
This patch fix this behavior.
Some DNS response may be valid from a protocol point of view but may not
contain any IP addresses.
This patch gives a new flag to the function dns_get_ip_from_response to
report such case.
It's up to the upper layer to decide what to do with this information.
Some DNS responses may be valid from a protocol point of view, but may
not contain any information considered as interested by the requester..
Purpose of the flag DNS_RESP_NO_EXPECTED_RECORD introduced by this patch is
to allow reporting such situation.
When this happens, a new DNS query is sent with a new query type.
For now, the function only expect A and AAAA query types which is enough
to cover current cases.
In a next future, it will be up to the caller to tell the function which
query types are expected.
The send_log function needs a final \n.
This bug is repported by Michael Ezzell.
Minor bug: when writing to syslog from Lua scripts, the last character from
each log entry is truncated.
core.Alert("this is truncated");
Sep 7 15:07:56 localhost haproxy[7055]: this is truncate
This issue appears to be related to the fact that send_log() (in src/log.c)
is expecting a newline at the end of the message's format string:
/*
* This function adds a header to the message and sends the syslog message
* using a printf format string. It expects an LF-terminated message.
*/
void send_log(struct proxy *p, int level, const char *format, ...)
I believe the fix would be in in src/hlua.c at line 760
<http://git.haproxy.org/?p=haproxy.git;a=blob;f=src/hlua.c;h=1e4d47c31e66c16c837ff2aa5ef577f6cafdc7e7;hb=316e3196285b89a917c7d84794ced59a6a5b4eba#l760>,
where this...
send_log(px, level, "%s", trash.str);
...should be adding a newline into the format string to accommodate what
the code expects.
send_log(px, level, "%s\n", trash.str);
This change provides what seems to be the correct behavior:
Sep 7 15:08:30 localhost haproxy[7150]: this is truncated
All other uses of send_log() in hlua.c have a trailing dot "." in the
message that is masking the truncation issue because the output message
stops on a clean word boundary. I suspect these would also benefit from
"\n" appended to their format strings as well, since this appears to be the
pattern seen throughout the rest of the code base.
Reported-by: Michael Ezzell <michael@ezzell.net>
The server's host name picked for resolution was incorrect, it did not
skip the address family specifier, did not resolve environment variables,
and messed up with the optional trailing colon.
Instead, let's get the fqdn returned by str2sa_range() and use that
exclusively.
If an environment variable is used in an address, and is not set, it's
silently considered as ":" or "0.0.0.0:0" which is not correct as it
can hide environment issues and lead to unexpected behaviours. Let's
report this case when it happens.
This fix should be backported to 1.5.
The function does a bunch of things among which resolving environment
variables, skipping address family specifiers and trimming port ranges.
It is the only one which sees the complete host name before trying to
resolve it. The DNS resolving code needs to know the original hostname,
so we modify this function to optionally provide it to the caller.
Note that the function itself doesn't know if the host part was a host
or an address, but str2ip() knows that and can be asked not to try to
resolve. So we first try to parse the address without resolving and
try again with resolving enabled. This way we know if the address is
explicit or needs some kind of resolution.
In the first version of the DNS resolver, HAProxy sends an ANY query
type and in case of issue fails over to the type pointed by the
directive in 'resolve-prefer'.
This patch allows the following new failover management:
1. default query type is still ANY
2. if response is truncated or in error because ANY is not supported by
the server, then a fail over to a new query type is performed. The
new query type is the one pointed by the directive 'resolve-prefer'.
3. if no response or still some errors occurs, then a query type fail over
is performed to the remaining IP address family.
First dns client implementation simply ignored most of DNS response
flags.
This patch changes the way the flags are parsed, using bit masks and
also take care of truncated responses.
Such response are reported to the above layer which can handle it
properly.
This patch introduces a new internal response state about the analysis
of a DNS response received by a server.
It is dedicated to report to above layer that the response is
'truncated'.
This patch updates the dns_nameserver structure to integrate a counter
dedicated to 'truncated' response sent by servers.
Such response are important to track, since HAProxy is supposed to
replay its request.
Under certain circonstance (a configuration with many servers relying on
DNS resolution and one of them triggering the replay of a request
because of a timeout or invalid response to an ANY query), HAProxy could
end up in an infinite loop over the currently supposed running DNS
queries.
This was caused because the FIFO list of running queries was improperly
updated in snr_resolution_error_cb. The head of the list was removed
instead of the resolution in error, when moving the resolution to the
end of the list.
In the mean time, a LIST_DEL statement is removed since useless. This
action is already performed by the dns_reset_resolution function.
Patch f046f1156149d3d8563cc45d7608f2c42ef5b596 introduced a regression:
DNS resolution doesn't start anymore, while it was supposed to make it
start with first health check.
Current patch fix this issue by triggering a new DNS resolution if the
last_resolution time is not set.
A crash was reported when using the "famous" http-send-name-header
directive. This time it's a bit tricky, it requires a certain number of
conditions to be met including maxconn on a server, queuing, timeout in
the queue and cookie-based persistence.
The problem is that in stream.c, before calling http_send_name_header(),
we check a number of conditions to know if we have to replace the header
name. But prior to reaching this place, it's possible for
sess_update_stream_int() to fail and change the stream-int's state to
SI_ST_CLO, send an error 503 to the client, and flush all buffers. But
http_send_name_header() can only be called with valid buffer contents
matching the http_msg's description. So when it rewinds the stream to
modify the header, buf->o becomes negative by the size of the incoming
request and is used as the argument to memmove() which basically
displaces 4GB of memory off a few bytes to write the new name, resulting
in a core and a core file that's really not fun to play with.
The solution obviously consists in refraining from calling this nasty
function when the stream interface is already closed.
This bug also affects 1.5 and possibly 1.4, so the fix must be backported
there.
See commit id bdc97a8795c52af94683db25a4984578e26f4857
Michael Ezzell reported that the following Lua code fails in
dev4 when the TCP is not established immediately (due to a little
bit of latency):
function tricky_socket()
local sock = core.tcp();
sock:settimeout(3);
core.log(core.alert,"calling connect()\n");
local connected, con_err = sock:connect("x.x.x.x",80);
core.log(core.alert,"returned from connect()\n");
if con_err ~= nil then
core.log(core.alert,"connect() failed with error: '" .. con_err .. "'\n");
end
The problem is that the flags who want to wake up the applet are
resetted before each applet call, so the applet must set again the
flags if the connection is not established.
When converting the "method" fetch to a string, we used to get an empty
string if the first character was not an upper case. This was caused by
the lookup function which returns HTTP_METH_NONE when a lookup is not
possible, and this method being mapped to an empty string in the array.
This is a totally stupid mechanism, there's no reason for having the
result depend on the first char. In fact the message parser already
checks that the syntax matches an HTTP token so we can only land there
with a valid token, hence only HTTP_METH_OTHER should be returned.
This fix should be backported to all actively supported branches.
Before this patch, two type of custom actions exists: ACT_ACTION_CONT and
ACT_ACTION_STOP. ACT_ACTION_CONT is a non terminal action and ACT_ACTION_STOP is
a terminal action.
Note that ACT_ACTION_STOP is not used in HAProxy.
This patch remove this behavior. Only type type of custom action exists, and it
is called ACT_CUSTOM. Now, the custion action can return a code indicating the
required behavior. ACT_RET_CONT wants that HAProxy continue the current rule
list evaluation, and ACT_RET_STOP wants that HAPRoxy stops the the current rule
list evaluation.
Jesse Hathaway reported a crash that Cyril Bont diagnosed as being
caused by the manipulation of srv_conn after setting it to NULL. This
happens in http-server-close mode when the server returns either a 401
or a 407, because the connection was previously closed then it's being
assigned the CO_FL_PRIVATE flag.
This bug only affects 1.6-dev as it was introduced by connection reuse code
with commit 387ebf8 ("MINOR: connection: add a new flag CO_FL_PRIVATE").
First DNS resolution is supposed to be triggered by first health check,
which is not the case with current code.
This patch fixes this behavior by setting the
resolution->last_resolution time to 0 instead of now_ms when parsing
server's configuration at startup.
When called from an http ruleset, txn:done() can still crash the process
because it closes the stream without consuming pending data resulting in
the transaction's buffer representation to differ from the real buffer.
This patch also adjusts the transaction's state to indicate that it's
closed to be consistent with what's already done in redirect rules.
When the Lua execution flow endswith the command done (core.done or txn.done())
an error is detourned, and the stack is no longer usable. This patch juste
reinitilize the stack if this case is detected.
The function txn:close() must be terminal because it demands the session
destruction. This patch renames this function to "done()" to be much
clearer about the fact that it is a final operation.
This patch is inspired by Bowen Ni's proposal and it is based on his first
implementation:
With Lua integration in HAProxy 1.6, one can change the request method,
path, uri, header, response header etc except response line.
I'd like to contribute the following methods to allow modification of the
response line.
[...]
There are two new keywords in 'http-response' that allows you to rewrite
them in the native HAProxy config. There are also two new APIs in Lua that
allows you to do the same rewriting in your Lua script.
Example:
Use it in HAProxy config:
*http-response set-code 404*
Or use it in Lua script:
*txn.http:res_set_reason("Redirect")*
I dont take the full patch because the manipulation of the "reason" is useless.
standard reason are associated with each returned code, and unknown code can
take generic reason.
So, this patch can set the status code, and the reason is automatically adapted.
The function dont remove remaineing analysers and dont update response
channel timeout.
The fix is a copy of the behavior of the functions http_apply_redirect_rule()
and stream_int_retnclose().
Tsvetan Tsvetanov reported that the following Lua code fails in
dev2 and dev3 :
function hello(txn)
local request_msg = txn.req:dup()
local tsm_sock = core.tcp()
tsm_sock:connect("127.0.0.1", 7777)
local res = tsm_sock:send(request_msg)
local response = tsm_sock:receive('*l')
txn.res:send(response)
txn:close()
end
Thierry diagnosed that it was caused by commit 563cc37 ("MAJOR: stream:
use a regular ->update for all stream interfaces"). It broke lua's
ability to establish outgoing connections.
The reason is that the applet used to be notified about established
connections just after the stream analyser loop, and that's not the
case anymore. In peers, this issue didn't happen because peers use
a handshake so after sending data, the response is received and wakes
the applet up again. Here we have to indicate that we want to send or
receive data, this will cause the notification to happen as soon as
the connection is ready. This is similar to pretending that we're
working on a full buffer after all. In theory subscribing for reads
is not needed, but it's added here for completeness.
Reported-By: Tsvetan Tsvetanov <cpi.cecko@gmail.com>
The table definition message id was used instead of the update acknowledgement id.
This bug causes a malformated message and a protocol error and breaks the
connection.
After that, the updates remain unacknowledged.
This was the first transparent proxy technology supported by haproxy
circa 2005 but it was obsoleted in 2007 by Tproxy 4.0 which removed a
lot of the earlier versions' shortcomings and was finally merged into
the kernel. Since nobody has been using cttproxy for many years now
and nobody has even just tried to compile the files, it's time to
remove it. The doc was updated as well.
This patch removes the special stick tables types names and
use the standard sample type names. This avoid the maintainance
of two types and remove the switch/case for matching a sample
type for each stick table type.
This patch is the first step for sample integration. Actually
the stick tables uses her own data type, and some converters
must be called to convert sample type to stick-tables types.
This patch removes the stick-table types and replace it by
the sample types. This prevent:
- Maintenance of two types of converters
- reduce the code using the samples converters
Now the prototype for each action from each section are the same, and
a discriminant for determining for each section we are called are added.
So, this patch removes the wrappers for the action functions called from
more than one section.
This patch removes 132 lines of useless code.
This patch normalize the return code of the configuration parsers. Before
these changes, the tcp action parser returned -1 if fail and 0 for the
succes. The http action returned 0 if fail and 1 if succes.
The normalisation does:
- ACT_RET_PRS_OK for succes
- ACT_RET_PRS_ERR for failure
Each (http|tcp)-(request|response) action use the same method
for looking up the action keyword during the cofiguration parsing.
This patch mutualize the code.
This patch merges the conguration keyword struct. Each declared configuration
keyword struct are similar with the others. This patch simplify the code.
Action function can return 3 status:
- error if the action encounter fatal error (like out of memory)
- yield if the action must terminate his work later
- continue in other cases
For performances considerations, some actions are not processed by remote
function. They are directly processed by the function. Some of these actions
does the same things but for different processing part (request / response).
This patch give the same name for the same actions, and change the normalization
of the other actions names.
This patch is ONLY a rename, it doesn't modify the code.
This patch group the action name in one file. Some action are called
many times and need an action embedded in the action caller. The main
goal is to have only one header file grouping all definitions.
