This patch remove the struct information stored both in the struct
sample_data and in the striuct sample. Now, only thestruct sample_data
contains data, and the struct sample use the struct sample_data for storing
his own data.
This strategy is less extreme than "always", it only dispatches first
requests to validated reused connections, and moves a connection from
the idle list to the safe list once it has seen a second request, thus
proving that it could be reused.
The "safe" mode consists in picking existing connections only when
processing a request that's not the first one from a connection. This
ensures that in case where the server finally times out and closes, the
client can decide to replay idempotent requests.
Now instead of closing the existing connection attached to the
stream interface, we first check if the one we pick was attached to
another stream interface, in which case the connections are swapped
if possible (eg: if the current connection is not private). That way
the previous connection remains attached to an existing session and
significantly increases the chances of being reused.
In connect_server(), if we don't have a connection attached to the
stream-int, we first look into the server's idle_conns list and we
pick the first one there, we detach it from its owner if it had one.
If we used to have a connection, we close it.
This mechanism works well but doesn't scale : as servers increase,
the likeliness that the connection attached to the stream interface
doesn't match the server and gets closed increases.
This flag is set on an outgoing connection when this connection gets
some properties that must not be shared with other connections, such
as dynamic transparent source binding, SNI or a proxy protocol header,
or an authentication challenge from the server. This will be needed
later to implement connection reuse.
Since we now always call this function with the reuse parameter cleared,
let's simplify the function's logic as it cannot return the existing
connection anymore. The savings on this inline function are appreciable
(240 bytes) :
$ size haproxy.old haproxy.new
text data bss dec hex filename
1020383 40816 36928 1098127 10c18f haproxy.old
1020143 40816 36928 1097887 10c09f haproxy.new
connect_server() already does most of the check that is done again in
si_alloc_conn(), so let's simply reuse the existing connection instead
of calling the function again. It will also simplify the connection
reuse.
Indeed, for reuse to be set, it also requires srv_conn to be valid. In the
end, the only situation where we have to release the existing connection
and allocate a new one is when reuse == 0.
objt_server() is called multiple times at various places while some
places already make use of srv for this. Let's move the call at the
top of the function and use it all over the place.
This patch removes the 32 bits unsigned integer and the 32 bit signed
integer. It replaces these types by a unique type 64 bit signed.
This makes easy the usage of integer and clarify signed and unsigned use.
With the previous version, signed and unsigned are used ones in place of
others, and sometimes the converter loose the sign. For example, divisions
are processed with "unsigned", if one entry is negative, the result is
wrong.
Note that the integer pattern matching and dotted version pattern matching
are already working with signed 64 bits integer values.
There is one user-visible change : the "uint()" and "sint()" sample fetch
functions which used to return a constant integer have been replaced with
a new more natural, unified "int()" function. These functions were only
introduced in the latest 1.6-dev2 so there's no impact on regular
deployments.
The new "sni" server directive takes a sample fetch expression and
uses its return value as a hostname sent as the TLS SNI extension.
A typical use case consists in forwarding the front connection's SNI
value to the server in a bridged HTTPS forwarder :
sni ssl_fc_sni
This patch removes the structs "session", "stream" and "proxy" from
the sample-fetches and converters function prototypes.
This permits to remove some weight in the prototype call.
The get_server_ph_post() function assumes that the buffer is contiguous.
While this is true for all the header part, it is not necessarily true
for the end of data the fit in the reserve. In this case there's a risk
to read past the end of the buffer for a few hundred bytes, and possibly
to crash the process if what follows is not mapped.
The fix consists in truncating the analyzed length to the length of the
contiguous block that follows the headers.
A config workaround for this bug would be to disable balance url_param.
This fix must be backported to 1.5. It seems 1.4 did have the check.
Many such function need a session, and till now they used to dereference
the stream. Once we remove the stream from the embryonic session, this
will not be possible anymore.
So as of now, sample fetch functions will be called with this :
- sess = NULL, strm = NULL : never
- sess = valid, strm = NULL : tcp-req connection
- sess = valid, strm = valid, strm->txn = NULL : tcp-req content
- sess = valid, strm = valid, strm->txn = valid : http-req / http-res
All of them can now retrieve the HTTP transaction *if it exists* from
the stream and be sure to get NULL there when called with an embryonic
session.
The patch is a bit large because many locations were touched (all fetch
functions had to have their prototype adjusted). The opportunity was
taken to also uniformize the call names (the stream is now always "strm"
instead of "l4") and to fix indent where it was broken. This way when
we later introduce the session here there will be less confusion.
Now this one is dynamically allocated. It means that 280 bytes of memory
are saved per TCP stream, but more importantly that it will become
possible to remove the l7 pointer from fetches and converters since
it will be deduced from the stream and will support being null.
A lot of care was taken because it's easy to forget a test somewhere,
and the previous code used to always trust s->txn for being valid, but
all places seem to have been visited.
All HTTP fetch functions check the txn first so we shouldn't have any
issue there even when called from TCP. When branching from a TCP frontend
to an HTTP backend, the txn is properly allocated at the same time as the
hdr_idx.
When s->si[0].end was dereferenced as a connection or anything in
order to retrieve information about the originating session, we'll
now use sess->origin instead so that when we have to chain multiple
streams in HTTP/2, we'll keep accessing the same origin.
Just like for the listener, the frontend is session-wide so let's move
it to the session. There are a lot of places which were changed but the
changes are minimal in fact.
With HTTP/2, we'll have to support multiplexed streams. A stream is in
fact the largest part of what we currently call a session, it has buffers,
logs, etc.
In order to catch any error, this commit removes any reference to the
struct session and tries to rename most "session" occurrences in function
names to "stream" and "sess" to "strm" when that's related to a session.
The files stream.{c,h} were added and session.{c,h} removed.
The session will be reintroduced later and a few parts of the stream
will progressively be moved overthere. It will more or less contain
only what we need in an embryonic session.
Sample fetch functions and converters will have to change a bit so
that they'll use an L5 (session) instead of what's currently called
"L4" which is in fact L6 for now.
Once all changes are completed, we should see approximately this :
L7 - http_txn
L6 - stream
L5 - session
L4 - connection | applet
There will be at most one http_txn per stream, and a same session will
possibly be referenced by multiple streams. A connection will point to
a session and to a stream. The session will hold all the information
we need to keep even when we don't yet have a stream.
Some more cleanup is needed because some code was already far from
being clean. The server queue management still refers to sessions at
many places while comments talk about connections. This will have to
be cleaned up once we have a server-side connection pool manager.
Stream flags "SN_*" still need to be renamed, it doesn't seem like
any of them will need to move to the session.
These 4 combinations are needlessly complicated since the session already
has direct access to the associated stream interfaces without having to
check an indirect pointer.
The purpose of these two macros will be to pass via the session to
find the relevant stream interfaces so that we don't need to store
the ->cons nor ->prod pointers anymore. Currently they're only defined
so that all references could be removed.
Note that many places need a second pass of clean up so that we don't
have any chn_prod(&s->req) anymore and only &s->si[0] instead, and
conversely for the 3 other cases.
The channels were pointers to outside structs and this is not needed
anymore since the buffers have moved, but this complicates operations.
Move them back into the session so that both channels and stream interfaces
are always allocated for a session. Some places (some early sample fetch
functions) used to validate that a channel was NULL prior to dereferencing
it. Now instead we check if chn->buf is NULL and we force it to remain NULL
until the channel is initialized.
When the destination IP is dynamically set, we can't use the "target"
to define the proto. This patch ensures that we always use the protocol
associated with the address family. The proto field was removed from
the server and check structs.
balance hdr(<name>) provides on option 'use_domain_only' to match only the
domain part in a header (designed for the Host header).
Olivier Fredj reported that the hashes were not the same for
'subdomain.domain.tld' and 'domain.tld'.
This is because the pointer was rewinded one step to far, resulting in a hash
calculated against wrong values :
- '.domai' for 'subdomain.domain.tld'
- ' domai' for 'domain.tld' (beginning with the space in the header line)
Another special case is when no dot can be found in the header : the hash will
be calculated against an empty string.
The patch addresses both cases : 'domain' will be used to compute the hash for
'subdomain.domain.tld', 'domain.tld' and 'domain' (using the whole header value
for the last case).
The fix must be backported to haproxy 1.5 and 1.4.
The path "MAJOR: namespace: add Linux network namespace support" doesn't
permit to use internal data producer like a "peers synchronisation"
system. The result is a segfault when the internal application starts.
This patch fix the commit b3e54fe387c7c1ea750f39d3029672d640c499f9
It is introduced in 1.6dev version, it doesn't need to be backported.
This patch makes it possible to create binds and servers in separate
namespaces. This can be used to proxy between multiple completely independent
virtual networks (with possibly overlapping IP addresses) and a
non-namespace-aware proxy implementation that supports the proxy protocol (v2).
The setup is something like this:
net1 on VLAN 1 (namespace 1) -\
net2 on VLAN 2 (namespace 2) -- haproxy ==== proxy (namespace 0)
net3 on VLAN 3 (namespace 3) -/
The proxy is configured to make server connections through haproxy and sending
the expected source/target addresses to haproxy using the proxy protocol.
The network namespace setup on the haproxy node is something like this:
= 8< =
$ cat setup.sh
ip netns add 1
ip link add link eth1 type vlan id 1
ip link set eth1.1 netns 1
ip netns exec 1 ip addr add 192.168.91.2/24 dev eth1.1
ip netns exec 1 ip link set eth1.$id up
...
= 8< =
= 8< =
$ cat haproxy.cfg
frontend clients
bind 127.0.0.1:50022 namespace 1 transparent
default_backend scb
backend server
mode tcp
server server1 192.168.122.4:2222 namespace 2 send-proxy-v2
= 8< =
A bind line creates the listener in the specified namespace, and connections
originating from that listener also have their network namespace set to
that of the listener.
A server line either forces the connection to be made in a specified
namespace or may use the namespace from the client-side connection if that
was set.
For more documentation please read the documentation included in the patch
itself.
Signed-off-by: KOVACS Tamas <ktamas@balabit.com>
Signed-off-by: Sarkozi Laszlo <laszlo.sarkozi@balabit.com>
Signed-off-by: KOVACS Krisztian <hidden@balabit.com>
Commit 98634f0 ("MEDIUM: backend: Enhance hash-type directive with an
algorithm options") cleaned up the hashing code by using a centralized
function. A bug appeared in get_server_uh() which is the URI hashing
function. Prior to the patch, the function would stop hashing on the
question mark, or on the trailing slash of a maximum directory count.
Consecutive to the patch, this last character is included into the
hash computation. This means that :
GET /0
GET /0?
Are not hashed similarly. The following configuration reproduces it :
mode http
balance uri
server s1 0.0.0.0:1234 redir /s1
server s2 0.0.0.0:1234 redir /s2
Many thanks to Vedran Furac for reporting this issue. The fix must
be backported to 1.5.
When we were generating a hash, it was done using an unsigned long. When the hash was used
to select a backend, it was sent as an unsigned int. This made it difficult to predict which
backend would be selected.
This patch updates get_hash, and the hash methods to use an unsigned int, to remain consistent
throughout the codebase.
This fix should be backported to 1.5 and probably in part to 1.4.
Checks.c has become a total mess. A number of proxy or server maintenance
and queue management functions were put there probably because they were
used there, but that makes the code untouchable. And that's without saying
that their names does not always relate to what they really do!
So let's do a first pass by moving these ones :
- set_backend_down() => backend.c
- redistribute_pending() => queue.c:pendconn_redistribute()
- check_for_pending() => queue.c:pendconn_grab_from_px()
- shutdown_sessions => server.c:srv_shutdown_sessions()
- shutdown_backup_sessions => server.c:srv_shutdown_backup_sessions()
All of them were moved at once.
Servers used to have 3 flags to store a state, now they have 4 states
instead. This avoids lots of confusion for the 4 remaining undefined
states.
The encoding from the previous to the new states can be represented
this way :
SRV_STF_RUNNING
| SRV_STF_GOINGDOWN
| | SRV_STF_WARMINGUP
| | |
0 x x SRV_ST_STOPPED
1 0 0 SRV_ST_RUNNING
1 0 1 SRV_ST_STARTING
1 1 x SRV_ST_STOPPING
Note that the case where all bits were set used to exist and was randomly
dealt with. For example, the task was not stopped, the throttle value was
still updated and reported in the stats and in the http_server_state header.
It was the same if the server was stopped by the agent or for maintenance.
It's worth noting that the internal function names are still quite confusing.
Now we introduce srv->admin and srv->prev_admin which are bitfields
containing one bit per source of administrative status (maintenance only
for now). For the sake of backwards compatibility we implement a single
source (ADMF_FMAINT) but the code already checks any source (ADMF_MAINT)
where the STF_MAINTAIN bit was previously checked. This will later allow
us to add ADMF_IMAINT for maintenance mode inherited from tracked servers.
Along doing these changes, it appeared that some places will need to be
revisited when implementing the inherited bit, this concerns all those
modifying the ADMF_FMAINT bit (enable/disable actions on the CLI or stats
page), and the checks to report "via" on the stats page. But currently
the code is harmless.
Till now, the server's state and flags were all saved as a single bit
field. It causes some difficulties because we'd like to have an enum
for the state and separate flags.
This commit starts by splitting them in two distinct fields. The first
one is srv->state (with its counter-part srv->prev_state) which are now
enums, but which still contain bits (SRV_STF_*).
The flags now lie in their own field (srv->flags).
The function srv_is_usable() was updated to use the enum as input, since
it already used to deal only with the state.
Note that currently, the maintenance mode is still in the state for
simplicity, but it must move as well.
We used to call srv_is_usable() with either the current state and weights
or the previous ones. This causes trouble for future changes, so let's first
split it in two variants :
- srv_is_usable(srv) considers the current status
- srv_was_usable(srv) considers the previous status
We used to have is_addr() in place to validate sometimes the existence
of an address, sometimes a valid IPv4 or IPv6 address. Replace them
carefully so that is_inet_addr() is used wherever we can only use an
IPv4/IPv6 address.
The RDP cookie extractor compares the 32-bit address from the request
to the address of each server in the farm without first checking that
the server's address is IPv4. This is a leftover from the IPv4 to IPv6
conversion. It's harmless as it's unlikely that IPv4 and IPv6 servers
will be mixed in an RDP farm, but better fix it.
This patch does not need to be backported.
This commit modifies the PROXY protocol V2 specification to support headers
longer than 255 bytes allowing for optional extensions. It implements the
PROXY protocol V2 which is a binary representation of V1. This will make
parsing more efficient for clients who will know in advance exactly how
many bytes to read. Also, it defines and implements some optional PROXY
protocol V2 extensions to send information about downstream SSL/TLS
connections. Support for PROXY protocol V1 remains unchanged.
Finn Arne Gangstad suggested that we should have the ability to break
keep-alive when the target server has reached its maxconn and that a
number of connections are present in the queue. After some discussion
around his proposed patch, the following solution was suggested : have
a per-proxy setting to fix a limit to the number of queued connections
on a server after which we break keep-alive. This ensures that even in
high latency networks where keep-alive is beneficial, we try to find a
different server.
This patch is partially based on his original proposal and implements
this configurable threshold.
All the code inherited from version 1.1 still holds a lot ot sessions
called "t" because in 1.1 they were tasks. This naming is very annoying
and sometimes even confusing, for example in code involving tables.
Let's get rid of this once for all and before 1.5-final.
Nothing changed beyond just carefully renaming these variables.
Cyril Bonté reported that the "lastsess" field of a stats-only backend
was never updated. In fact the same is true for any applet and anything
not a server. Also, lastsess was not updated for a server reusing its
connection for a new request.
Since the goal of this field is to report recent activity, it's better
to ensure that all accesses are reported. The call has been moved to
the code validating the session establishment instead, since everything
passes there.
http_body_rewind() returns the number of bytes to rewind before buf->p to
find the message's body. It relies on http_hdr_rewind() to find the beginning
and adds msg->eoh + msg->eol which are always safe.
http_data_rewind() does the same to get the beginning of the data, which
differs from above when a chunk is present. It uses the function above and
adds msg->sol.
The purpose is to centralize further ->sov changes aiming at avoiding
to rely on buf->o.
http_uri_rewind() returns the number of bytes to rewind before buf->p to
find the URI. It relies on http_hdr_rewind() to find the beginning and
is just here to simplify operations.
The purpose is to centralize further ->sov changes aiming at avoiding
to rely on buf->o.
http_hdr_rewind() returns the number of bytes to rewind before buf->p to
find the beginning of headers. At the moment it's not exact as it still
relies on buf->o, assuming that no other data from a past message were
pending there, but it's what was done till there.
The purpose is to centralize further ->sov changes aiming at avoiding
to rely on buf->o.
http_body_bytes() returns the number of bytes of the current message body
present in the buffer. It is compatible with being called before and after
the headers are forwarded.
This is done to centralize further ->sov changes.
