The current level variable use only 2 bits for storing the 3 access
level (user, oper and admin).
This patch add a bitmask which allows to use the remaining bits for
other usage.
When running with multiple process, if some proxies are just assigned
to some processes, the other processes will just close the file descriptors
for the listening sockets. However, we may still have to provide those
sockets when reloading, so instead we just try hard to pretend those proxies
are dead, while keeping the sockets opened.
A new global option, no-reused-socket", has been added, to restore the old
behavior of closing the sockets not bound to this process.
Add a new command that will send all the listening sockets, via the
stats socket, and their properties.
This is a first step to workaround the linux problem when reloading
haproxy.
Now we exclusively use xprt_get(XPRT_RAW) instead of &raw_sock or
xprt_get(XPRT_SSL) for &ssl_sock. This removes a bunch of #ifdef and
include spread over a number of location including backend, cfgparse,
checks, cli, hlua, log, server and session.
Historically, all listeners have a pointer to the frontend. But since
the introduction of SSL, we now have an intermediary layer called
bind_conf corresponding to a "bind" line. It makes no sense to have
the frontend on each listener given that it's the same for all
listeners belonging to a same bind_conf. Also certain parts like
SSL can only operate on bind_conf and need the frontend.
This patch fixes this by moving the frontend pointer from the listener
to the bind_conf. The extra indirection is quite cheap given and the
places were this is used are very scarce.
A mistake was made when the socket layer was cut into proto and
transport, the transport was attached to the listener while all
listeners in a single "bind" line always have exactly the same
transport. It doesn't seem obvious but this is the reason why there
are so many #ifdefs USE_OPENSSL in cfgparse : a lot of operations
have to be open-coded because cfgparse only manipulates bind_conf
and we don't have the information of the transport layer here.
Very little code makes use of the transport layer, mainly session
setup and log. These places can afford an extra pointer indirection
(the listener points to the bind_conf). This change is thus very small,
it saves a little bit of memory (8B per listener) and makes the code
more flexible.
Most of the keywords don't need to have their own entry in the appctx
union, they just need to reuse some generic pointers like we've been
used to do in the appctx with st{0,1,2}. This patch adds p0, p1, i0, i1
and initializes them to zero before calling the parser. This way some
of the simplest existing keywords will be able to disappear from the
union.
It's worth noting that this is an extension to what was initially
attempted via the "private" member that I removed a few patches ago by
not understanding how it was supposed to be used. Here the fact that
we share the same union will force us to be stricter: the code either
uses the general purpose variables or it uses its own fields but not
both.
This is a leftover from the cleanup campaign, the stats scope was still
initialized by the CLI instead of being initialized by the stats keyword
parsers. This should probably be backported to 1.7 to make the code more
consistent.
Sometimes a registered keyword will not need any specific parsing nor
initialization, so it's annoying to have to write an empty parsing
function returning zero just for this.
This patch makes it possible to automatically call a keyword's I/O
handler of when the parsing function is not defined, while still allowing
a parser to set the I/O handler itself.
Another small bug in "show cli sockets" made the last fix always report
process 64 due to a signedness issue in the shift operation when building
the mask.
When an entity tries to get a buffer, if it cannot be allocted, for example
because the number of buffers which may be allocated per process is limited,
this entity is added in a list (called <buffer_wq>) and wait for an available
buffer.
Historically, the <buffer_wq> list was logically attached to streams because it
were the only entities likely to be added in it. Now, applets can also be
waiting for a free buffer. And with filters, we could imagine to have more other
entities waiting for a buffer. So it make sense to have a generic list.
Anyway, with the current design there is a bug. When an applet failed to get a
buffer, it will wait. But we add the stream attached to the applet in
<buffer_wq>, instead of the applet itself. So when a buffer is available, we
wake up the stream and not the waiting applet. So, it is possible to have
waiting applets and never awakened.
So, now, <buffer_wq> is independant from streams. And we really add the waiting
entity in <buffer_wq>. To be generic, the entity is responsible to define the
callback used to awaken it.
In addition, applets will still request an input buffer when they become
active. But they will not be sleeped anymore if no buffer are available. So this
is the responsibility to the applet I/O handler to check if this buffer is
allocated or not. This way, an applet can decide if this buffer is required or
not and can do additional processing if not.
[wt: backport to 1.7 and 1.6]
In 1.5-dev20, commit 48bcfda ("MEDIUM: dumpstat: make the CLI parser
understand the backslash as an escape char") introduced support for
backslash on the CLI, but it strips all backslashes in all arguments
instead of only unescaping them, making it impossible to pass a
backslash in an argument.
This will allow us to use a backslash in a command over the socket, eg.
"add acl #0 ABC\\XYZ".
[wt: this should be backported to 1.7 and 1.6]
stats_sock_parse_request() was renamed cli_parse_request(). It now takes
an appctx instead of a stream interface, and presets ->st2 to 0 so that
most handlers will not have to set it anymore. The io_handler is set by
default to the keyword's IO handler so that the parser can simply change
it without having to rewrite the new state.
All 4 rate-limit settings were handled at once given that exactly the
same checks are performed on them. In case of missing or incorrect
argument, the detailed supported options are printed with their use
case.
This was the last specific entry in the CLI parser, some additional
cleanup may still be done.
Also mention that "set server" is preferred now. Note that these
were the last enable/disable commands in cli.c. Also remove the
now unused expect_server_admin() function.
It could be argued that it's between server, stream and session but
at least due to the fact that it operates on streams, its best place
is in stream.c.
This way we don't have any more state specific to a given yieldable
command. The other commands should be easier to move as they only
involve a parser.
It really belongs to proto_http.c since it's a dump for HTTP request
and response errors. Note that it's possible that some parts do not
need to be exported anymore since it really is the only place where
errors are manipulated.
The table dump code was a horrible mess, with common parts interleaved
all the way to deal with the various actions (set/clear/show). A few
error messages were still incorrect, as the "set" operation did not
update them so they would still report "unknown action" (now fixed).
The action was now passed as a private argument to the CLI keyword
which itself is copied into the appctx private field. It's just an
int cast to a pointer.
Some minor issues were noticed while doing this, for example when dumping
an entry by key, if the key doesn't exist, nothing is printed, not even
the table's header. It's unclear whether this was intentional but it
doesn't really match what is done for data-based dumps. It was left
unchanged for now so that a later fix can be backported if needed.
Enum entries STAT_CLI_O_TAB, STAT_CLI_O_CLR and STAT_CLI_O_SET were
removed.
Move the "show info" command to stats.c using the CLI keyword API
to register it on the CLI. The stats_dump_info_to_buffer() function
is now static again. Note, we don't need proto_ssl anymore in cli.c.
Move the "show stat" command to stats.c using the CLI keyword API
to register it on the CLI. The stats_dump_stat_to_buffer() function
is now static again.
Move 'show sess' CLI functions to stream.c and use the cli keyword API
to register it on the CLI.
[wt: the choice of stream vs session makes sense because since 1.6 these
really are streams that we're dumping and not sessions anymore]
Move map and acl CLI functions to map.c and use the cli keyword API to
register actions on the CLI. Then remove the now unused individual
"add" and "del" keywords.
proto/dumpstats.h has been split in 4 files:
* proto/cli.h contains protypes for the CLI
* proto/stats.h contains prototypes for the stats
* types/cli.h contains definition for the CLI
* types/stats.h contains definition for the stats
