Now we exclusively use xprt_get(XPRT_RAW) instead of &raw_sock or
xprt_get(XPRT_SSL) for &ssl_sock. This removes a bunch of #ifdef and
include spread over a number of location including backend, cfgparse,
checks, cli, hlua, log, server and session.
Having it in the ifdef complicates certain operations which require
additional ifdefs just to access a member which could remain zero in
non-ssl cases. Let's move it out, it will not even increase the
struct size on 64-bit machines due to alignment.
Also mention that "set server" is preferred now. Note that these
were the last enable/disable commands in cli.c. Also remove the
now unused expect_server_admin() function.
Several CLI commands require a server, so let's have a function to
look this one up and prepare the appropriate error message and the
appctx's state in case of failure.
uint16_t instead of u_int16_t
None ISO fields of struct tm are not present, but
by zeroyfing it, on GNU and BSD systems tm_gmtoff
field will be set.
[wt: moved the memset into each of the date functions]
Now that it is possible to decide whether we prefer to use libc or the
state file to resolve the server's IP address and it is possible to change
a server's IP address at run time on the CLI, let's not restrict the reuse
of the address from the state file anymore to the DNS only.
The impact is that by default the state file will be considered first
(which matches its purpose) and only then the libc. This way any address
change performed at run time over the CLI will be preserved regardless
of DNS usage or not.
It is very common when validating a configuration out of production not to
have access to the same resolvers and to fail on server address resolution,
making it difficult to test a configuration. This option simply appends the
"none" method to the list of address resolution methods for all servers,
ensuring that even if the libc fails to resolve an address, the startup
sequence is not interrupted.
This will allow a server to automatically fall back to an explicit numeric
IP address when all other methods fail. The address is simply specified in
the address list.
Now that we have "init-addr none", it becomes possible to recover on
libc resolver's failures. Thus it's preferable not to alert nor fail
at the moment the libc is called, and instead process the failure at
the end of the list. This allows "none" to be set after libc to
provide a smooth fallback in case of resolver issues.
This new setting supports a comma-delimited list of methods used to
resolve the server's FQDN to an IP address. Currently supported methods
are "libc" (use the regular libc's resolver) and "last" (use the last
known valid address found in the state file).
The list is implemented in a 32-bit integer, because each init-addr
method only requires 3 bits. The last one must always be SRV_IADDR_END
(0), allowing to store up to 10 methods in a single 32 bit integer.
Note: the doc is provided at the end of this series.
WARNING: this is a MAJOR (and disruptive) change with previous HAProxy's
behavior: before, HAProxy never ever used to change a server administrative
status when the DNS resolution failed at run time.
This patch gives HAProxy the ability to change the administrative status
of a server to MAINT (RMAINT actually) when an error is encountered for
a period longer than its own allowed by the corresponding 'hold'
parameter.
IE if the configuration sets "hold nx 10s" and a server's hostname
points to a NX for more than 10s, then the server will be set to RMAINT,
hence in MAINTENANCE mode.
It will be important to help debugging some DNS resolution issues to
know why a server was marked down, so let's make the function support
a 3rd argument with an indication of the reason. Passing NULL will keep
the message as-is.
It's important to report in the server state change logs that RMAINT was
cleared, as it's not the regular maintenance mode, it's specific to name
resolution, and it's important to report the new state (which can be DRAIN
or READY).
Server addresses are not resolved anymore upon the first pass so that we
don't fail if an address cannot be resolved by the libc. Instead they are
processed all at once after the configuration is fully loaded, by the new
function srv_init_addr(). This function only acts on the server's address
if this address uses an FQDN, which appears in server->hostname.
For now the function does two things, to followup with HAProxy's historical
default behavior:
1. apply server IP address found in server-state file if runtime DNS
resolution is enabled for this server
2. use the DNS resolver provided by the libc
If none of the 2 options above can find an IP address, then an error is
returned.
All of this will be needed to support the new server parameter "init-addr".
For now, the biggest user-visible change is that all server resolution errors
are dumped at once instead of causing a startup failure one by one.
Right now there is an issue with the way the maintenance flags are
propagated upon startup. They are not propagate, just copied from the
tracked server. This implies that depending on the server's order, some
tracking servers may not be marked down. For example this configuration
does not work as expected :
server s1 1.1.1.1:8000 track s2
server s2 1.1.1.1:8000 track s3
server s3 1.1.1.1:8000 track s4
server s4 wtap:8000 check inter 1s disabled
It results in s1/s2 being up, and s3/s4 being down, while all of them
should be down.
The only clean way to process this is to run through all "root" servers
(those not tracking any other server), and to propagate their state down
to all their trackers. This is the same algorithm used to propagate the
state changes. It has to be done both to compute the IDRAIN flag and the
IMAINT flag. However, doing so requires that tracking servers are not
marked as inherited maintenance anymore while parsing the configuration
(and given that it is wrong, better drop it).
This fix also addresses another side effect of the bug above which is
that the IDRAIN/IMAINT flags are stored in the state files, and if
restored while the tracked server doesn't have the equivalent flag,
the servers may end up in a situation where it's impossible to remove
these flags. For example in the configuration above, after removing
"disabled" on server s4, the other servers would have remained down,
and not anymore with this fix. Similarly, the combination of IMAINT
or IDRAIN with their respective forced modes was not accepted on
reload, which is wrong as well.
This bug has been present at least since 1.5, maybe even 1.4 (it came
with tracking support). The fix needs to be backported there, though
the srv-state parts are irrelevant.
This commit relies on previous patch to silence warnings on startup.
We'll have to use srv_set_admin_flag() to propagate some server flags
during the startup, and we don't want the resulting actions to cause
warnings, logs nor e-mail alerts to be generated since we're just applying
the config or a state file. So let's condition these notifications to the
fact that we're starting.
CMAINT indicates that the server was *initially* disabled in the
configuration via the "disabled" keyword. FDRAIN indicates that the
server was switched to the DRAIN state from the CLI or the agent.
This it's perfectly valid to have both of them in the state file,
so the parser must not reject this combination.
This fix must be backported to 1.6.
There were seveal reports about the DRAIN state not being properly
restored upon reload.
It happens that the condition in the code does exactly the opposite
of what the comment says, and the comment is right so the code is
wrong.
It's worth noting that the conditions are complex here due to the 2
available methods to set the drain state (CLI/agent, and config's
weight). To paraphrase the updated comment in the code, there are
two possible reasons for FDRAIN to have been present :
- previous config weight was zero
- "set server b/s drain" was sent to the CLI
In the first case, we simply want to drop this drain state if the new
weight is not zero anymore, meaning the administrator has intentionally
turned the weight back to a positive value to enable the server again
after an operation. In the second case, the drain state was forced on
the CLI regardless of the config's weight so we don't want a change to
the config weight to lose this status. What this means is :
- if previous weight was 0 and new one is >0, drop the DRAIN state.
- if the previous weight was >0, keep it.
This fix must be backported to 1.6.
ipcpy() is used to replace an IP address with another one, but it
doesn't preserve the original port so all callers have to do it
manually while it's trivial to do there. Better do it inside the
function.
DNS servers don't return A or AAAA record if the query points to a CNAME
not resolving to the right type.
We know it because the last record of the response is a CNAME. We can
trigger a new query, switching to a new query type, handled by the layer
above.
New DNS response parser function which turn the DNS response from a
network buffer into a DNS structure, much easier for later analysis
by upper layer.
Memory is pre-allocated at start-up in a chunk dedicated to DNS
response store.
New error code to report a wrong number of queries in a DNS response.
This function can replace update_server_addr() where the need to change the
server's port as well as the IP address is required.
It performs some validation before performing each type of change.
Introduction of 3 new server flags to remember if some parameters were set
during configuration parsing.
* SRV_F_CHECKADDR: this server has a check addr configured
* SRV_F_CHECKPORT: this server has a check port configured
* SRV_F_AGENTADDR: this server has a agent addr configured
HAProxy used to deduce port used for health checks when parsing configuration
at startup time.
Because of this way of working, it makes it complicated to change the port at
run time.
The current patch changes this behavior and makes HAProxy to choose the
port used for health checking when preparing the check task itself.
A new type of error is introduced and reported when no port can be found.
There won't be any impact on performance, since the process to find out the
port value is made of a few 'if' statements.
This patch also introduces a new check state CHK_ST_PORT_MISS: this flag is
used to report an error in the case when HAProxy needs to establish a TCP
connection to a server, to perform a health check but no TCP ports can be
found for it.
And last, it also introduces a new stream termination condition:
SF_ERR_CHK_PORT. Purpose of this flag is to report an error in the event when
HAProxy has to run a health check but no port can be found to perform it.
Up to HAProxy 1.7-dev3, HAProxy used to use the first bind port from it's
local 'listen' section when no port is configured on the server.
IE, in the configuration below, the server port would be 25:
listen smtp
bind :25
server s1 1.0.0.1 check
This way of working is now obsolete and can be removed, furthermore it is not
documented!
This will make the possibility to change the server's port much easier.
Alexander Lebedev reported that the DNS parser crashes in 1.6 with a bus
error on Sparc when it receives a response. This is obviously caused by
some alignment issues. The issue can also be reproduced on ARMv5 when
setting /proc/cpu/alignment to 4 (which helps debugging).
Two places cause this crash in turn, the first one is when the IP address
from the packet is compared to the current one, and the second place is
when the address is assigned because an unaligned address is passed to
update_server_addr().
This patch modifies these places to properly use memcpy() and memcmp()
to manipulate the unaligned data.
Nenad Merdanovic found another set of places specific to 1.7 in functions
in_net_ipv4() and in_net_ipv6(), which are used to compare networks. 1.6
has the functions but does not use them. There we perform a temporary copy
to a local variable to fix the problem. The type of the function's argument
is wrong since it's not necessarily aligned, so we change it for a const
void * instead.
This fix must be backported to 1.6. Note that in 1.6 the code is slightly
different, there's no rec[] array, the pointer is used directly from the
buffer.
This is very useful in complex architecture systems where HAproxy
is balancing DB connections for example. We want to keep the maxconn
high in order to avoid issues with queueing on the LB level when
there is slowness on another part of the system. Example is a case of
an architecture where each thread opens multiple DB connections, which
if get stuck in queue cause a snowball effect (old connections aren't
closed, new ones cannot be established). These connections are mostly
idle and the DB server has no problem handling thousands of them.
Allowing us to dynamically set maxconn depending on the backend usage
(LA, CPU, memory, etc.) enables us to have high maxconn for situations
like above, but lowering it in case there are real issues where the
backend servers become overloaded (cache issues, DB gets hit hard).
dns_option struct pref_net field is an array of 5. The issue
here shows that pref_net_nb can go up to 5 as well which might lead
to read outside of this array.
Instead of repeating the type of the LHS argument (sizeof(struct ...))
in calls to malloc/calloc, we directly use the pointer
name (sizeof(*...)). The following Coccinelle patch was used:
@@
type T;
T *x;
@@
x = malloc(
- sizeof(T)
+ sizeof(*x)
)
@@
type T;
T *x;
@@
x = calloc(1,
- sizeof(T)
+ sizeof(*x)
)
When the LHS is not just a variable name, no change is made. Moreover,
the following patch was used to ensure that "1" is consistently used as
a first argument of calloc, not the last one:
@@
@@
calloc(
+ 1,
...
- ,1
)
In C89, "void *" is automatically promoted to any pointer type. Casting
the result of malloc/calloc to the type of the LHS variable is therefore
unneeded.
Most of this patch was built using this Coccinelle patch:
@@
type T;
@@
- (T *)
(\(lua_touserdata\|malloc\|calloc\|SSL_get_app_data\|hlua_checkudata\|lua_newuserdata\)(...))
@@
type T;
T *x;
void *data;
@@
x =
- (T *)
data
@@
type T;
T *x;
T *data;
@@
x =
- (T *)
data
Unfortunately, either Coccinelle or I is too limited to detect situation
where a complex RHS expression is of type "void *" and therefore casting
is not needed. Those cases were manually examined and corrected.
Commit baf9794 ("BUG/MINOR: tcpcheck: conf parsing error when no port
configured on server and first rule(s) is (are) COMMENT") was wrong, it
incorrectly implemented a list access by dereferencing a pointer of an
incorrect type resulting in checking the next element in the list. The
consequence is that it stops before the last comment instead of at the
last one and skips the first rule. In the end, rules starting with
comments are not affected, but if a sequence of checks directly starts
with connect, it is then skipped and this is visible when no port is
configured on the server line as the config refuses to load.
There was another occurence of the same bug a few lines below, both
of them were fixed. Tests were made on different configs and confirm
the new fix is OK.
This fix must be backported to 1.6.
the function server_parse_addr_change_request() contain an hardcoded
updater source "stats command". this function can be called from other
sources than the "stats command", so this patch make this argument
generic.
When the server address is changed, a message with unrequired '\n' or
'.' is displayed, like this:
[WARNING] 054/101137 (3229) : zzzz/s3 changed its IP from 127.0.0.1 to ::55 by stats command
.
This patch remove the '\n' which is sent before the '.'.
This patch must be backported in 1.6
This options prioritize th choice of an ip address matching a network. This is
useful with clouds to prefer a local ip. In some cases, a cloud high
avalailibility service can be announced with many ip addresses on many
differents datacenters. The latency between datacenter is not negligible, so
this patch permitsto prefers a local datacenter. If none address matchs the
configured network, another address is selected.
DNS selection preferences are actually declared inline in the
struct server. There are copied from the server struct to the
dns_resolution struct for each resolution.
Next patchs adds new preferences options, and it is not a good
way to copy all the configuration information before each dns
resolution.
This patch extract the configuration preference from the struct
server and declares a new dedicated struct. Only a pointer to this
new striuict will be copied before each dns resolution.
Servers state function save and apply server IP when DNS resolution is
enabled on a server.
Purpose is to prevent switching traffic from one server to an other one
when multiple IPs are returned by the DNS server for the A or AAAA
record.
That said, a bug in current code lead to erase the service port while
copying the IP found in the file into the server structure in HAProxy's
memory.
This patch fix this bug.
The bug was reported on the ML by Robert Samuel Newson and fix proposed
by Nenad Merdanovic.
Thank you both!!!
backport: can be backported to 1.6
A small configuration parsing error exists when no port is setup on the
server IP:port statement and the server's parameter 'port' is not set
and if the first tcp-check rule is a comment, like in the example below:
backend b
option tcp-check
tcp-check comment blah
tcp-check connect 8444
server s 127.0.0.1 check
In such case, an ALERT is improperly returned, despite this
configuration is valid and works.
The new code move the pointer to the first tcp-check rule which isn't a
comment before checking the presence of the port.
backport status: 1.6 and above
Current configuration parsing is permissive in such situation:
A server in a backend with no port conigured on the IP address
statement, no 'port' parameter configured and last rule of a tcp-check
is a CONNECT with no port.
The current code currently parses all the rules to validate a port is
well available, but it misses the last one, which means such
configuration is valid:
backend b
option tcp-check
tcp-check connect port 8444
tcp-check connect
server s 127.0.0.1 check
the second connect tentative is sent to port '0'...
Current patch fixes this by parsing the list the right way, including
the last rule.
backport status: 1.6 and above
fgets() can return NULL on error or when EOF occurs. This patch adds a
check of fgets() return value and displays a warning if the first line of
the server state file can not be read. Additionally, we make sure to close
the previously opened file descriptor.
Causes HAProxy to emit a static string to the agent on every check,
so that you can independently control multiple services running
behind a single agent port.
The status DNS_UPD_NAME_ERROR returned by dns_get_ip_from_response and
which means the queried name can't be found in the response was
improperly processed (fell into the default case).
This lead to a loop where HAProxy simply resend a new query as soon as
it got a response for this status and in the only case where such type
of response is the very first one received by the process.
This should be backported into 1.6 branch
Basically, it's ill-defined and shouldn't really be used going forward.
We can't guarantee that resolvers will do the 'legwork' for us and
actually resolve CNAMES when we request the ANY query-type. Case in point
(obfuscated, clearly):
PRODUCTION! ahayworth@secret-hostname.com:~$
dig @10.11.12.53 ANY api.somestartup.io
; <<>> DiG 9.8.4-rpz2+rl005.12-P1 <<>> @10.11.12.53 ANY api.somestartup.io
; (1 server found)
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 62454
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 4, ADDITIONAL: 0
;; QUESTION SECTION:
;api.somestartup.io. IN ANY
;; ANSWER SECTION:
api.somestartup.io. 20 IN CNAME api-somestartup-production.ap-southeast-2.elb.amazonaws.com.
;; AUTHORITY SECTION:
somestartup.io. 166687 IN NS ns-1254.awsdns-28.org.
somestartup.io. 166687 IN NS ns-1884.awsdns-43.co.uk.
somestartup.io. 166687 IN NS ns-440.awsdns-55.com.
somestartup.io. 166687 IN NS ns-577.awsdns-08.net.
;; Query time: 1 msec
;; SERVER: 10.11.12.53#53(10.11.12.53)
;; WHEN: Mon Oct 19 22:02:29 2015
;; MSG SIZE rcvd: 242
HAProxy can't handle that response correctly.
Rather than try to build in support for resolving CNAMEs presented
without an A record in an answer section (which may be a valid
improvement further on), this change just skips ANY record types
altogether. A and AAAA are much more well-defined and predictable.
Notably, this commit preserves the implicit "Prefer IPV6 behavior."
Furthermore, ANY query type by default is a bad idea: (from Robin on
HAProxy's ML):
Using ANY queries for this kind of stuff is considered by most people
to be a bad practice since besides all the things you named it can
lead to incomplete responses. Basically a resolver is allowed to just
return whatever it has in cache when it receives an ANY query instead
of actually doing an ANY query at the authoritative nameserver. Thus
if it only received queries for an A record before you do an ANY query
you will not get an AAAA record even if it is actually available since
the resolver doesn't have it in its cache. Even worse if before it
only got MX queries, you won't get either A or AAAA
Commit e11cfcd ("MINOR: config: new backend directives:
load-server-state-from-file and server-state-file-name") introduced a bug
which can cause haproxy to crash upon startup by sending user-controlled
data in a format string when emitting a warning. Fix the way the warning
message is built to avoid this.
No backport is needed, this was introduced in 1.6-dev6 only.
Commit e11cfcd ("MINOR: config: new backend directives:
load-server-state-from-file and server-state-file-name") caused these
warnings when building with Clang :
src/server.c:1972:21: warning: comparison of unsigned expression < 0 is always false [-Wtautological-compare]
(srv_uweight < 0) || (srv_uweight > SRV_UWGHT_MAX))
~~~~~~~~~~~ ^ ~
src/server.c:1980:21: warning: comparison of unsigned expression < 0 is always false [-Wtautological-compare]
(srv_iweight < 0) || (srv_iweight > SRV_UWGHT_MAX))
~~~~~~~~~~~ ^ ~
Indeed, srv_iweight and srv_uweight are unsigned. Just drop the offending test.
This patch uses the start up of the health check task to also start
the warmup task when required.
This is executed only once: when HAProxy has just started up and can
be started only if the load-server-state-from-file feature is enabled
and the server was in the warmup state before a reload occurs.
This directive gives HAProxy the ability to use the either the global
server-state-file directive or a local one using server-state-file-name to
load server states.
The state can be saved right before the reload by the init script, using
the "show servers state" command on the stats socket redirecting output into
a file.
When a server is disabled in the configuration using the "disabled"
keyword, a single flag is positionned: SRV_ADMF_CMAINT (use to be
SRV_ADMF_FMAINT)..
That said, when providing the first version of this code, we also
changed the SRV_ADMF_MAINT mask to match any of the possible MAINT
cases: SRV_ADMF_FMAINT, SRV_ADMF_IMAINT, SRV_ADMF_CMAINT
Since SRV_ADMF_CMAINT is never (and is not supposed to be) altered at
run time, once a server has this flag set up, it can never ever be
enabled again using the stats socket.
In order to fix this, we should:
- consider SRV_ADMF_CMAINT as a simple flag to report the state in the
old configuration file (will be used after a reload to deduce the
state of the server in a new running process)
- enabling both SRV_ADMF_CMAINT and SRV_ADMF_FMAINT when the keyword
"disabled" is in use in the configuration
- update the mask SRV_ADMF_MAINT as it was before, to only match
SRV_ADMF_FMAINT and SRV_ADMF_IMAINT.
The following patch perform the changes above.
It allows fixing the regression without breaking the way the up coming
feature (seamless server state accross reloads) is going to work.
Note: this is 1.6-only, no backport needed.
There are two types of retries when performing a DNS resolution:
1. retry because of a timeout
2. retry of the full sequence of requests (query types failover)
Before this patch, the 'resolution->try' counter was incremented
after each send of a DNS request, which does not cover the 2 cases
above.
This patch fix this behavior.
Some DNS response may be valid from a protocol point of view but may not
contain any IP addresses.
This patch gives a new flag to the function dns_get_ip_from_response to
report such case.
It's up to the upper layer to decide what to do with this information.
Some DNS responses may be valid from a protocol point of view, but may
not contain any information considered as interested by the requester..
Purpose of the flag DNS_RESP_NO_EXPECTED_RECORD introduced by this patch is
to allow reporting such situation.
When this happens, a new DNS query is sent with a new query type.
For now, the function only expect A and AAAA query types which is enough
to cover current cases.
In a next future, it will be up to the caller to tell the function which
query types are expected.
The server's host name picked for resolution was incorrect, it did not
skip the address family specifier, did not resolve environment variables,
and messed up with the optional trailing colon.
Instead, let's get the fqdn returned by str2sa_range() and use that
exclusively.
The function does a bunch of things among which resolving environment
variables, skipping address family specifiers and trimming port ranges.
It is the only one which sees the complete host name before trying to
resolve it. The DNS resolving code needs to know the original hostname,
so we modify this function to optionally provide it to the caller.
Note that the function itself doesn't know if the host part was a host
or an address, but str2ip() knows that and can be asked not to try to
resolve. So we first try to parse the address without resolving and
try again with resolving enabled. This way we know if the address is
explicit or needs some kind of resolution.
In the first version of the DNS resolver, HAProxy sends an ANY query
type and in case of issue fails over to the type pointed by the
directive in 'resolve-prefer'.
This patch allows the following new failover management:
1. default query type is still ANY
2. if response is truncated or in error because ANY is not supported by
the server, then a fail over to a new query type is performed. The
new query type is the one pointed by the directive 'resolve-prefer'.
3. if no response or still some errors occurs, then a query type fail over
is performed to the remaining IP address family.
This patch introduces a new internal response state about the analysis
of a DNS response received by a server.
It is dedicated to report to above layer that the response is
'truncated'.
Under certain circonstance (a configuration with many servers relying on
DNS resolution and one of them triggering the replay of a request
because of a timeout or invalid response to an ANY query), HAProxy could
end up in an infinite loop over the currently supposed running DNS
queries.
This was caused because the FIFO list of running queries was improperly
updated in snr_resolution_error_cb. The head of the list was removed
instead of the resolution in error, when moving the resolution to the
end of the list.
In the mean time, a LIST_DEL statement is removed since useless. This
action is already performed by the dns_reset_resolution function.
First DNS resolution is supposed to be triggered by first health check,
which is not the case with current code.
This patch fixes this behavior by setting the
resolution->last_resolution time to 0 instead of now_ms when parsing
server's configuration at startup.
This was the first transparent proxy technology supported by haproxy
circa 2005 but it was obsoleted in 2007 by Tproxy 4.0 which removed a
lot of the earlier versions' shortcomings and was finally merged into
the kernel. Since nobody has been using cttproxy for many years now
and nobody has even just tried to compile the files, it's time to
remove it. The doc was updated as well.
The newly created server flag SRV_ADMF_CMAINT means that the server is
in 'disabled' mode because of configuration statement 'disabled'.
The flag SRV_ADMF_FMAINT should not be set anymore in such case and is
reserved only when the server is Forced in maintenance mode from the
stats socket.
These ones are considered safe as they have already been reused.
They will be useful in "aggressive" and "always" http-reuse modes
in order to place the first request of a connection with the least
risk.
For now it's not populated but we have the list entry. It will carry
all idle connections that sessions don't want to share. They may be
used later to reclaim connections upon socket shortage for example.
This patch introduces three new functions which can be used to find a
server in a farm using different server information:
- server unique id (srv->puid)
- server name
- find best match using either name or unique id
When performing best matching, the following applies:
- use the server name first (if provided)
- use the server id if provided
in any case, the function can update the caller about mismatches
encountered.
This flag aims at reporting whether the server unique id (srv->puid) has
been forced by the administrator in HAProxy's configuration.
If not set, it means HAProxy has generated automatically the server's
unique id.
Ability to change a server IP address during HAProxy run time.
For now this is provided via function update_server_addr() which
currently is not called.
A log is emitted on each change. For now we do it inconditionally,
but later we'll want to do it only on certain circumstances, which
explains why the logging block is enclosed in if(1).
This is similar to the way email alerts are sent when servers are marked as
DOWN.
Like the log messages corresponding to these state changes the messages
have log level notice. Thus they are suppressed by the default email-alert
level of 'alert'. To allow these messages the email-alert level should
be set to 'notice', 'info' or 'debug'. e.g:
email-alert level notice
"email-alert mailers" and "email-alert to" settings are also required in
order for any email alerts to be sent.
A follow-up patch will document the above.
Signed-off-by: Simon Horman <horms@verge.net.au>
With HTTP/2, we'll have to support multiplexed streams. A stream is in
fact the largest part of what we currently call a session, it has buffers,
logs, etc.
In order to catch any error, this commit removes any reference to the
struct session and tries to rename most "session" occurrences in function
names to "stream" and "sess" to "strm" when that's related to a session.
The files stream.{c,h} were added and session.{c,h} removed.
The session will be reintroduced later and a few parts of the stream
will progressively be moved overthere. It will more or less contain
only what we need in an embryonic session.
Sample fetch functions and converters will have to change a bit so
that they'll use an L5 (session) instead of what's currently called
"L4" which is in fact L6 for now.
Once all changes are completed, we should see approximately this :
L7 - http_txn
L6 - stream
L5 - session
L4 - connection | applet
There will be at most one http_txn per stream, and a same session will
possibly be referenced by multiple streams. A connection will point to
a session and to a stream. The session will hold all the information
we need to keep even when we don't yet have a stream.
Some more cleanup is needed because some code was already far from
being clean. The server queue management still refers to sessions at
many places while comments talk about connections. This will have to
be cleaned up once we have a server-side connection pool manager.
Stream flags "SN_*" still need to be renamed, it doesn't seem like
any of them will need to move to the session.
When the destination IP is dynamically set, we can't use the "target"
to define the proto. This patch ensures that we always use the protocol
associated with the address family. The proto field was removed from
the server and check structs.
This patch adds a new option which allows configuration of the maximum
log level of messages for which email alerts will be sent.
The default is alert which is more restrictive than
the current code which sends email alerts for all priorities.
That behaviour may be configured using the new configuration
option to set the maximum level to notice or greater.
email-alert level notice
Signed-off-by: Simon Horman <horms@verge.net.au>
This removes the trailing '.' from both the header and the body of email
alerts.
The main motivation for this change is to make the format of email alerts
generated from srv_set_stopped() consistent with those generated from
set_server_check_status().
Signed-off-by: Simon Horman <horms@verge.net.au>
The motivation for this is to make checks more independent of each
other to allow further reuse of their infrastructure.
For nowserver->check and server->agent still always use the same values
for the addr and proto fields so this patch should not introduce any
behavioural changes.
Signed-off-by: Simon Horman <horms@verge.net.au>
Refactor init_check so that an error string is returned
rather than alerts being printed by it. Also
init_check to checks.c and provide a prototype to allow
it to be used from multiple C files.
Signed-off-by: Simon Horman <horms@verge.net.au>
disable starts a server in the disabled state, however setting the health
of an agent implies that the agent is disabled as well as the server.
This is a problem because the state of the agent is not restored if
the state of the server is subsequently updated leading to an
unexpected state.
For example, if a server is started disabled and then the server
state is set to ready then without this change show stat indicates
that the server is "DOWN (agent)" when it is expected that the server
would be UP if its (non-agent) health check passes.
Reported-by: Mark Brooks <mark@loadbalancer.org>
Signed-off-by: Simon Horman <horms@verge.net.au>
This patch makes it possible to create binds and servers in separate
namespaces. This can be used to proxy between multiple completely independent
virtual networks (with possibly overlapping IP addresses) and a
non-namespace-aware proxy implementation that supports the proxy protocol (v2).
The setup is something like this:
net1 on VLAN 1 (namespace 1) -\
net2 on VLAN 2 (namespace 2) -- haproxy ==== proxy (namespace 0)
net3 on VLAN 3 (namespace 3) -/
The proxy is configured to make server connections through haproxy and sending
the expected source/target addresses to haproxy using the proxy protocol.
The network namespace setup on the haproxy node is something like this:
= 8< =
$ cat setup.sh
ip netns add 1
ip link add link eth1 type vlan id 1
ip link set eth1.1 netns 1
ip netns exec 1 ip addr add 192.168.91.2/24 dev eth1.1
ip netns exec 1 ip link set eth1.$id up
...
= 8< =
= 8< =
$ cat haproxy.cfg
frontend clients
bind 127.0.0.1:50022 namespace 1 transparent
default_backend scb
backend server
mode tcp
server server1 192.168.122.4:2222 namespace 2 send-proxy-v2
= 8< =
A bind line creates the listener in the specified namespace, and connections
originating from that listener also have their network namespace set to
that of the listener.
A server line either forces the connection to be made in a specified
namespace or may use the namespace from the client-side connection if that
was set.
For more documentation please read the documentation included in the patch
itself.
Signed-off-by: KOVACS Tamas <ktamas@balabit.com>
Signed-off-by: Sarkozi Laszlo <laszlo.sarkozi@balabit.com>
Signed-off-by: KOVACS Krisztian <hidden@balabit.com>
Lasse Birnbaum Jensen reported an issue when agent checks are used at the same
time as standard healthchecks when SSL is enabled on the server side.
The symptom is that agent checks try to communicate in SSL while it should
manage raw data. This happens because the transport layer is shared between all
kind of checks.
To fix the issue, the transport layer is now stored in each check type,
allowing to use SSL healthchecks when required, while an agent check should
always use the raw_sock implementation.
The fix must be backported to 1.5.
This patch adds support for a new "drain" mode. So now we have 3 admin
modes for a server :
- READY
- DRAIN
- MAINT
The drain mode disables load balancing but leaves the server up. It can
coexist with maint, except that maint has precedence. It is also inherited
from tracked servers, so just like maint, it's represented with 2 bits.
New functions were designed to set/clear each flag and to propagate the
changes to tracking servers when relevant, and to log the changes. Existing
functions srv_set_adm_maint() and srv_set_adm_ready() were replaced to make
use of the new functions.
Currently the drain mode is not yet used, however the whole logic was tested
with all combinations of set/clear of both flags in various orders to catch
all corner cases.
srv_is_usable() is broader than srv_is_usable() as it not only considers
the weight but the server's state as well. Future changes will allow a
server to be in drain mode with a non-zero weight, so we should migrate
to use that function instead.
This function was taken from check_set_server_drain(). It does not
consider health checks at all and only sets a server to stopping
provided it's not in maintenance and is not currently stopped. The
resulting state will be STOPPING. The state change is propagated
to tracked servers.
For now the function is not used, but the goal is to split health
checks status from server status and to be able to change a server's
state regardless of health checks statuses.
This function was taken from check_set_server_up(). It does not consider
health checks at all and only sets a server up provided it's not in
maintenance. The resulting state may be either RUNNING or STARTING
depending on the presence of a slowstart or not. The state change is
propagated to tracked servers.
For now the function is not used, but the goal is to split health
checks status from server status and to be able to change a server's
state regardless of health checks statuses.
This function was extracted from check_set_server_down(). In only
manipulates the server state and does not consider the health checks
at all, nor does it modify their status. It takes a reason message to
report in logs, however it passes NULL when recursing through the
trackers chain.
For now the function is not used, but the goal is to split health
checks status from server status and to be able to change a server's
state regardless of health checks statuses.
srv_adm_append_status() was renamed srv_append_status() since it's no
more dedicated to maintenance mode. It now supports a reason which if
not null is appended to the output string.
Now that it is possible to know whether a server is in forced maintenance
or inherits its maintenance status from another one, it is possible to
allow server tracking at more than one level. We still provide a loop
detection however.
Note that for the stats it's a bit trickier since we have to report the
check state which corresponds to the state of the server at the end of
the chain.
This change now involves a new flag SRV_ADMF_IMAINT to note that the
maintenance status of a server is inherited from another server. Thus,
we know at each server level in the chain if it's running, in forced
maintenance or in a maintenance status because it tracks another server,
or even in both states.
Disabling a server propagates this flag down to other servers. Enabling
a server flushes the flag down. A server becomes up again once both of
its flags are cleared.
Two new functions "srv_adm_set_maint()" and "srv_adm_set_ready()" are used to
manipulate this maintenance status. They're used by the CLI and the stats
page.
Now the stats page always says "MAINT" instead of "MAINT(via)" and it's
only the chk/down field which reports "via x/y" when the status is
inherited from another server, but it doesn't say it when a server was
forced into maintenance. The CSV output indicates "MAINT (via x/y)"
instead of only "MAINT(via)". This is the most accurate representation.
One important thing is that now entering/leaving maintenance for a
tracking server correctly follows the state of the tracked server.
Checks.c has become a total mess. A number of proxy or server maintenance
and queue management functions were put there probably because they were
used there, but that makes the code untouchable. And that's without saying
that their names does not always relate to what they really do!
So let's do a first pass by moving these ones :
- set_backend_down() => backend.c
- redistribute_pending() => queue.c:pendconn_redistribute()
- check_for_pending() => queue.c:pendconn_grab_from_px()
- shutdown_sessions => server.c:srv_shutdown_sessions()
- shutdown_backup_sessions => server.c:srv_shutdown_backup_sessions()
All of them were moved at once.
Servers used to have 3 flags to store a state, now they have 4 states
instead. This avoids lots of confusion for the 4 remaining undefined
states.
The encoding from the previous to the new states can be represented
this way :
SRV_STF_RUNNING
| SRV_STF_GOINGDOWN
| | SRV_STF_WARMINGUP
| | |
0 x x SRV_ST_STOPPED
1 0 0 SRV_ST_RUNNING
1 0 1 SRV_ST_STARTING
1 1 x SRV_ST_STOPPING
Note that the case where all bits were set used to exist and was randomly
dealt with. For example, the task was not stopped, the throttle value was
still updated and reported in the stats and in the http_server_state header.
It was the same if the server was stopped by the agent or for maintenance.
It's worth noting that the internal function names are still quite confusing.
Now we introduce srv->admin and srv->prev_admin which are bitfields
containing one bit per source of administrative status (maintenance only
for now). For the sake of backwards compatibility we implement a single
source (ADMF_FMAINT) but the code already checks any source (ADMF_MAINT)
where the STF_MAINTAIN bit was previously checked. This will later allow
us to add ADMF_IMAINT for maintenance mode inherited from tracked servers.
Along doing these changes, it appeared that some places will need to be
revisited when implementing the inherited bit, this concerns all those
modifying the ADMF_FMAINT bit (enable/disable actions on the CLI or stats
page), and the checks to report "via" on the stats page. But currently
the code is harmless.
Till now, the server's state and flags were all saved as a single bit
field. It causes some difficulties because we'd like to have an enum
for the state and separate flags.
This commit starts by splitting them in two distinct fields. The first
one is srv->state (with its counter-part srv->prev_state) which are now
enums, but which still contain bits (SRV_STF_*).
The flags now lie in their own field (srv->flags).
The function srv_is_usable() was updated to use the enum as input, since
it already used to deal only with the state.
Note that currently, the maintenance mode is still in the state for
simplicity, but it must move as well.
Detecting that a server's status has changed is a bit messy, as well
as it is to commit the status changes. We'll have to add new conditions
soon and we'd better avoid to multiply the number of touched locations
with the high risk of forgetting them.
This commit introduces :
- srv_lb_status_changed() to report if the status changed from the
previously committed one ;
- svr_lb_commit_status() to commit the current status
The function is now used by all load-balancing algorithms.
This flag is only a copy of (srv->uweight == 0), so better get rid of
it to reduce some of the confusion that remains in the code, and use
a simple function to return this state based on this weight instead.
We used to have is_addr() in place to validate sometimes the existence
of an address, sometimes a valid IPv4 or IPv6 address. Replace them
carefully so that is_inet_addr() is used wherever we can only use an
IPv4/IPv6 address.
Currently, mixing an IPv4 and an IPv6 address in checks happens to
work by pure luck because the two protocols use the same functions
at the socket level and both use IPPROTO_TCP. However, they're
definitely wrong as the protocol for the check address is retrieved
from the server's address.
Now the protocol assigned to the connection is the same as the one
the address in use belongs to (eg: the server's address or the
explicit check address).
This commit modifies the PROXY protocol V2 specification to support headers
longer than 255 bytes allowing for optional extensions. It implements the
PROXY protocol V2 which is a binary representation of V1. This will make
parsing more efficient for clients who will know in advance exactly how
many bytes to read. Also, it defines and implements some optional PROXY
protocol V2 extensions to send information about downstream SSL/TLS
connections. Support for PROXY protocol V1 remains unchanged.
The cfgparse.c file becomes huge, and a large part of it comes from the
server keyword parser. Since the configuration is a bit more modular now,
move this parser to server.c.
This patch also moves the check of the "server" keyword earlier in the
supported keywords list, resulting in a slightly faster config parsing
for configs with large numbers of servers (about 10%).
No functional change was made, only the code was moved.
Summary:
Track and report last session time on the stats page for each server
in every backend, as well as the backend.
This attempts to address the requirement in the ROADMAP
- add a last activity date for each server (req/resp) that will be
displayed in the stats. It will be useful with soft stop.
The stats page reports this as time elapsed since last session. This
change does not adequately address the requirement for long running
session (websocket, RDP... etc).
Having the check state partially stored in the server doesn't help.
Some functions such as srv_getinter() rely on the server being checked
to decide what check frequency to use, instead of relying on the check
being configured. So let's get rid of SRV_CHECKED and SRV_AGENT_CHECKED
and only use the check's states instead.
This is achieved by moving rise and fall from struct server to struct check.
After this move the behaviour of the primary check, server->check is
unchanged. However, the secondary agent check, server->agent now has
independent rise and fall values each of which are set to 1.
The result is that receiving "fail", "stopped" or "down" just once from the
agent will mark the server as down. And receiving a weight just once will
allow the server to be marked up if its primary check is in good health.
This opens up the scope to allow the rise and fall values of the agent
check to be configurable, however this has not been implemented at this
stage.
Signed-off-by: Simon Horman <horms@verge.net.au>
A crash was reported by Igor at owind when changing a server's weight
on the CLI. Lukas Tribus could reproduce a related bug where setting
a server's weight would result in the new weight being multiplied by
the initial one. The two bugs are the same.
The incorrect weight calculation results in the total farm weight being
larger than what was initially allocated, causing the map index to be out
of bounds on some hashes. It's easy to reproduce using "balance url_param"
with a variable param, or with "balance static-rr".
It appears that the calculation is made at many places and is not always
right and not always wrong the same way. Thus, this patch introduces a
new function "server_recalc_eweight()" which is dedicated to this task
of computing ->eweight from many other elements including uweight and
current time (for slowstart), and all users now switch to use this
function.
The patch is a bit large but the code was not trivially fixable in a way
that could guarantee this situation would not occur anymore. The fix is
much more readable and has been verified to work with all algorithms,
with both consistent and map-based hashes, and even with static-rr.
Slowstart was tested as well, just like enable/disable server.
The same bug is very likely present in 1.4 as well, so the patch will
probably need to be backported eventhough it will not apply as-is.
Thanks to Lukas and Igor for the information they provided to reproduce it.
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
Signed-off-by: Simon Horman <horms@verge.net.au>
Paramatise the following functions over the check of a server
* set_server_down
* set_server_up
* srv_getinter
* server_status_printf
* set_server_check_status
* set_server_disabled
* set_server_enabled
Generally the server parameter of these functions has been removed.
Where it is still needed it is obtained using check->server.
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
By paramatising these functions they may act on each of the checks
without further significant modification.
Explanation of the SSP_O_HCHK portion of this change:
* Prior to this patch SSP_O_HCHK serves a single purpose which
is to tell server_status_printf() weather it should print
the details of the check of a server or not.
With the paramatisation that this patch adds there are two cases.
1) Printing the details of the check in which case a
valid check parameter is needed.
2) Not printing the details of the check in which case
the contents check parameter are unused.
In case 1) we could pass SSP_O_HCHK and a valid check and;
In case 2) we could pass !SSP_O_HCHK and any value for check
including NULL.
If NULL is used for case 2) then SSP_O_HCHK becomes supurfulous
and as NULL is used for case 2) SSP_O_HCHK has been removed.
Signed-off-by: Simon Horman <horms@verge.net.au>
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
The split has been made by:
* Moving elements of struct server's check element that will
be shared by both checks into a new check_common element
of struct server.
* Moving the remaining elements to a new struct check and
making struct server's check element a struct check.
* Adding a server element to struct check, a back-pointer
to the server element it is a member of.
- At this time the server could be obtained using
container_of, however, this will not be so easy
once a second struct check element is added to struct server
to accommodate an agent health check.
Signed-off-by: Simon Horman <horms@verge.net.au>
Detect:
* Empty weight string, including no digits before '%' in relative
weight string
* Trailing garbage, including between the last integer and '%'
in relative weights
The motivation for this is to allow the weight string to be safely
logged if successfully parsed by this function
Signed-off-by: Simon Horman <horms@verge.net.au>
Allow relative weights greater than 100%,
capping the absolute value to 256 which is
the largest supported absolute weight.
Signed-off-by: Simon Horman <horms@verge.net.au>
Break out set weight processing code.
This is in preparation for reusing the code.
Also, remove duplicate check in nested if clauses.
{px->lbprm.algo & BE_LB_PROP_DYN) is checked by
the immediate outer if clause, so there is no need
to check it a second time.
Signed-off-by: Simon Horman <horms@verge.net.au>
Just like with the "bind" lines, we'll switch the "server" line
parsing to keyword registration. The code is essentially the same
as for bind keywords, with minor changes such as support for the
default-server keywords and support for variable argument count.
It should be stated as a rule that a C file should never
include types/xxx.h when proto/xxx.h exists, as it gives
less exposure to declaration conflicts (one of which was
caught and fixed here) and it complicates the file headers
for nothing.
Only types/global.h, types/capture.h and types/polling.h
have been found to be valid includes from C files.
This patch adds two new variables: fastinter and downinter.
When server state is:
- non-transitionally UP -> inter (no change)
- transitionally UP (going down), unchecked or transitionally DOWN (going up) -> fastinter
- down -> downinter
It allows to set something like:
server sr6 127.0.51.61:80 cookie s6 check inter 10000 downinter 20000 fastinter 500 fall 3 weight 40
In the above example haproxy uses 10000ms between checks but as soon as
one check fails fastinter (500ms) is used. If server is down
downinter (20000) is used or fastinter (500ms) if one check pass.
Fastinter is also used when haproxy starts.
New "timeout.check" variable was added, if set haproxy uses it as an additional
read timeout, but only after a connection has been already established. I was
thinking about using "timeout.server" here but most people set this
with an addition reserve but still want checks to kick out laggy servers.
Please also note that in most cases check request is much simpler
and faster to handle than normal requests so this timeout should be smaller.
I also changed the timeout used for check connections establishing.
Changes from the previous version:
- use tv_isset() to check if the timeout is set,
- use min("timeout connect", "inter") but only if "timeout check" is set
as this min alone may be to short for full (connect + read) check,
- debug code (fprintf) commented/removed
- documentation
Compile tested only (sorry!) as I'm currently traveling but changes
are rather small and trivial.
Hello,
This patch implements new statistics for SLA calculation by adding new
field 'Dwntime' with total down time since restart (both HTTP/CSV) and
extending status field (HTTP) or inserting a new one (CSV) with time
showing how long each server/backend is in a current state. Additionaly,
down transations are also calculated and displayed for backends, so it is
possible to know how many times selected backend was down, generating "No
server is available to handle this request." error.
New information are presentetd in two different ways:
- for HTTP: a "human redable form", one of "100000d 23h", "23h 59m" or
"59m 59s"
- for CSV: seconds
I believe that seconds resolution is enough.
As there are more columns in the status page I decided to shrink some
names to make more space:
- Weight -> Wght
- Check -> Chk
- Down -> Dwn
Making described changes I also made some improvements and fixed some
small bugs:
- don't increment s->health above 's->rise + s->fall - 1'. Previously it
was incremented an then (re)set to 's->rise + s->fall - 1'.
- do not set server down if it is down already
- do not set server up if it is up already
- fix colspan in multiple places (mostly introduced by my previous patch)
- add missing "status" header to CSV
- fix order of retries/redispatches in server (CSV)
- s/Tthen/Then/
- s/server/backend/ in DATA_ST_PX_BE (dumpstats.c)
Changes from previous version:
- deal with negative time intervales
- don't relay on s->state (SRV_RUNNING)
- little reworked human_time + compacted format (no spaces). If needed it
can be used in the future for other purposes by optionally making "cnt"
as an argument
- leave set_server_down mostly unchanged
- only little reworked "process_chk: 9"
- additional fields in CSV are appended to the rigth
- fix "SEC" macro
- named arguments (human_time, be_downtime, srv_downtime)
Hope it is OK. If there are only cosmetic changes needed please fill free
to correct it, however if there are some bigger changes required I would
like to discuss it first or at last to know what exactly was changed
especially since I already put this patch into my production server. :)
Thank you,
Best regards,
Krzysztof Oledzki
The files are now stored under :
- include/haproxy for the generic includes
- include/types.h for the structures needed within prototypes
- include/proto.h for function prototypes and inline functions
- src/*.c for the C files
Most include files are now covered by LGPL. A last move still needs
to be done to put inline functions under GPL and not LGPL.
Version has been set to 1.3.0 in the code but some control still
needs to be done before releasing.
