The registering of the keylog callback seems to provoke a loss of
performance. Disable the registration as well as the fetches if
tune.ssl.keylog is off.
Must be backported as far as 2.2.
Since commit 9b2598 ("BUG/MEDIUM: ssl: Verify error codes can exceed
63"), the ca_ignerr_bitfield and crt_ignerr_bietfield are incorrecly
accessed from __objt_listener(conn->target)->bind_conf which is not
avaiable from QUIC. The bind_conf variable was mistakenly replaced.
This patch fixes the issue by using again the bind_conf variable.
Must be backported where 9b2598 was backported.
The CRT and CA verify error codes were stored in 6 bits each in the
xprt_st field of the ssl_sock_ctx meaning that only error code up to 63
could be stored. Likewise, the ca-ignore-err and crt-ignore-err options
relied on two unsigned long longs that were used as bitfields for all
the ignored error codes. On the latest OpenSSL1.1.1 and with OpenSSLv3
and newer, verify errors have exceeded this value so these two storages
must be increased. The error codes will now be stored on 7 bits each and
the ignore-err bitfields are replaced by a big enough array and
dedicated bit get and set functions.
It can be backported on all stable branches.
[wla: let it be tested a little while before backport]
Signed-off-by: William Lallemand <wlallemand@haproxy.org>
In case of error, the ocsp item might already be in the ocsp certificate
tree but simply freed instead of destroyed through ssl_sock_free_ocsp.
This patch can be backported to all stable versions.
When calling ssl_get0_issuer_chain, if akid is not NULL but its keyid
is, then the AUTHORITY_KEYID is not freed.
This patch can be backported to all stable branches.
When running HAProxy with OpenSSLv3, the two BIGNUMs used to build our
own DH parameters are not freed. It was not necessary previously because
ownership of those parameters was transferred to OpenSSL through the
DH_set0_pqg call.
This patch should be backported to 2.6.
A previous commit tries to fix uninitialized GCC warning on ssl code for
QUIC build. See the fix here :
48e46f98cc
BUILD: ssl_sock: bind_conf uninitialized in ssl_sock_bind_verifycbk()
However, this is incomplete as it still reports possible NULL
dereference on ctx variable (GCC v12.2.0). Here is the compilation
result :
src/ssl_sock.c: In function ‘ssl_sock_bind_verifycbk’:
src/ssl_sock.c:1739:12: error: potential null pointer dereference [-Werror=null-dereference]
1739 | ctx->xprt_st |= SSL_SOCK_ST_FL_VERIFY_DONE;
|
To fix this, remove check on qc which can also never happens and replace
it with a BUG_ON. This seems to satisfy GCC on my machine.
This must be backported up to 2.6.
Even if this cannot happen, ensure <bind_conf> is initialized in this
function to please some compilers.
Takes the opportunity of this patch to replace an ABORT_NOW() by
a BUG_ON() because if the variable values they test are not initialized,
this is really because there is a bug.
Must be backported to 2.6.
xprt_quic module was too large and did not reflect the true architecture
by contrast to the other protocols in haproxy.
Extract code related to XPRT layer and keep it under xprt_quic module.
This code should only contains a simple API to communicate between QUIC
lower layer and connection/MUX.
The vast majority of the code has been moved into a new module named
quic_conn. This module is responsible to the implementation of QUIC
lower layer. Conceptually, it overlaps with TCP kernel implementation
when comparing QUIC and HTTP1/2 stacks of haproxy.
This should be backported up to 2.6.
Idle connections do not work on 32-bit machines due to an alignment issue
causing the connection nodes to be indexed with their lower 32-bits set to
zero and the higher 32 ones containing the 32 lower bitss of the hash. The
cause is the use of ebmb_node with an aligned data, as on this platform
ebmb_node is only 32-bit aligned, leaving a hole before the following hash
which is a uint64_t:
$ pahole -C conn_hash_node ./haproxy
struct conn_hash_node {
struct ebmb_node node; /* 0 20 */
/* XXX 4 bytes hole, try to pack */
int64_t hash; /* 24 8 */
struct connection * conn; /* 32 4 */
/* size: 40, cachelines: 1, members: 3 */
/* sum members: 32, holes: 1, sum holes: 4 */
/* padding: 4 */
/* last cacheline: 40 bytes */
};
Instead, eb64 nodes should be used when it comes to simply storing a
64-bit key, and that is what this patch does.
For backports, a variant consisting in simply marking the "hash" member
with a "packed" attribute on the struct also does the job (tested), and
might be preferable if the fix is difficult to adapt. Only 2.6 and 2.5
are affected by this.
This fixes 4 tiny and harmless typos in mux_quic.c, quic_tls.c and
ssl_sock.c. Originally sent via GitHub PR #1843.
Signed-off-by: cui fliter <imcusg@gmail.com>
[Tim: Rephrased the commit message]
[wt: further complete the commit message]
Add QUIC support to the ssl_sock_switchctx_cbk() variant used only when
no client_hello_cb is available.
This could be used with libreSSL implementation of QUIC for example.
It also works with quictls when HAVE_SSL_CLIENT_HELLO_CB is removed from
openss-compat.h
When building HAProxy with USE_QUIC and libressl 3.6.0, the
ssl_sock_switchtx_cbk symbol is not found because libressl does not
implement the client_hello_cb.
A ssl_sock_switchtx_cbk version for the servername callback is available
but wasn't exported correctly.
This verification is done by ssl_sock_bind_verifycbk() which is set at different
locations in the ssl_sock.c code . About QUIC connections, there are a lot of chances
the connection object is not initialized when entering this function. What must
be accessed is the SSL object to retrieve the connection or quic_conn objects,
then the bind_conf object of the listener. If the connection object is not found,
we try to find the quic_conn object.
Modify ssl_sock_dump_errors() interface which takes a connection object as parameter
to also passed a quic_conn object as parameter. Again this function try first
to access the connection object if not NULL or the quic_conn object if not.
There is a remaining thing to do for QUIC: store the certificate verification error
code as it is currently stored in the connection object. This error code is at least
used by the "bc_err" and "fc_err" sample fetches.
There are chances this bug is in relation with GH #1851. Thank you to @tasavis
for the report.
Must be merged into 2.6.
ssl_tlsext_ticket_key_cb() is called when "tls-ticket-keys" option is used on a
"bind" line. It needs to have an access to the TLS ticket keys which have been
stored into the listener bind_conf struct. The fix consists in nitializing the
<ref> variable (references to TLS secret keys) the correct way when this callback
is called for a QUIC connection. The bind_conf struct is store into the quic_conn
object (QUIC connection).
This issue may be in relation with GH #1851. Thank you for @tasavis for the report.
Must be backported to 2.6.
dh of length 1024 were chosen for EVP_PKEY_EC key type.
let us pick "default_dh_param" instead.
issue was found on Ubuntu 22.04 which is shipped with OpenSSL configured
with SECLEVEL=2 by default. such SECLEVEL value prohibits DH shorter than
2048:
OpenSSL error[0xa00018a] SSL_CTX_set0_tmp_dh_pkey: dh key too small
better strategy for chosing DH still may be considered though.
fd_insert() was already given a thread group ID and a global thread mask.
Now we're changing the few callers to take the group-local thread mask
instead. It's passed directly into the FD's thread mask. Just like for
previous commit, it must not change anything when a single group is
configured.
The file descriptors will need to know the thread group ID in addition
to the mask. This extends fd_insert() to take the tgid, and will store
it into the FD.
In the FD, the tgid is stored as a combination of tgid on the lower 16
bits and a refcount on the higher 16 bits. This allows to know when it's
really possible to trust the tgid and the running mask. If a refcount is
higher than 1 it indeed indicates another thread else might be in the
process of updating these values.
Since a closed FD must necessarily have a zero refcount, a test was
added to fd_insert() to make sure that it is the case.
Before 2.3, after an async crypto processing or on session close, the engine
async file's descriptors were removed from the fdtab but not closed because
it is the engine which has created the file descriptor, and it is responsible
for closing it. In 2.3 the fd_remove() call was replaced by fd_stop_both()
which stops the polling but does not remove the fd from the fdtab and the
fd remains indefinitively in the fdtab.
A simple replacement by fd_delete() is not a valid fix because fd_delete()
removes the fd from the fdtab but also closes the fd. And the fd will be
closed twice: by the haproxy's core and by the engine itself.
Instead, let's set FD_DISOWN on the FD before calling fd_delete() which will
take care of not closing it.
This patch must be backported on branches >= 2.3, and it relies on this
previous patch:
MINOR: fd: add a new FD_DISOWN flag to prevent from closing a deleted FD
As mentioned in the patch above, a different flag will be needed in 2.3.
A curious practise seems to have started long ago and contaminated various
code areas, consisting in appending "_pool" at the end of the name of a
given pool. That makes no sense as the name is only used to name the pool
in diags such as "show pools", and since names are truncated there, this
adds some confusion when analysing the dump outputs. Let's just clean all
of them at once. there were essentially in SSL and QUIC.
At this time haproxy supported only incompatible version negotiation feature which
consists in sending a Version Negotiation packet after having received a long packet
without compatible value in its version field. This version value is the version
use to build the current packet. This patch does not modify this behavior.
This patch adds the support for compatible version negotiation feature which
allows endpoints to negotiate during the first flight or packets sent by the
client the QUIC version to use for the connection (or after the first flight).
This is done thanks to "version_information" parameter sent by both endpoints.
To be short, the client offers a list of supported versions by preference order.
The server (or haproxy listener) chooses the first version it also supported as
negotiated version.
This implementation has an impact on the tranport parameters handling (in both
direcetions). Indeed, the server must sent its version information, but only
after received and parsed the client transport parameters). So we cannot
encode these parameters at the same time we instantiated a new connection.
Add QUIC_TP_DRAFT_VERSION_INFORMATION(0xff73db) new transport parameter.
Add tp_version_information new C struct to handle this new parameter.
Implement quic_transport_param_enc_version_info() (resp.
quic_transport_param_dec_version_info()) to encode (resp. decode) this
parameter.
Add qc_conn_finalize() which encodes the transport parameters and configure
the TLS stack to send them.
Add ->negotiated_ictx quic_conn C struct new member to store the Initial
QUIC TLS context for the negotiated version. The Initial secrets derivation
is version dependent.
Rename ->version to ->original_version and add ->negotiated_version to
this C struct to reflect the QUIC-VN RFC denomination.
Modify most of the QUIC TLS API functions to pass a version as parameter.
Export the QUIC version definitions to be reused at least from quic_tp.c
(transport parameters.
Move the token check after the QUIC connection lookup. As this is the original
version which is sent into a Retry packet, and because this original version is
stored into the connection, we must check the token after having retreived this
connection.
Add packet version to traces.
See https://datatracker.ietf.org/doc/html/draft-ietf-quic-version-negotiation-08
for more information about this new feature.
Make the transport parameters be standlone as much as possible as
it consists only in encoding/decoding data into/from buffers.
Reduce the size of xprt_quic.h. Unfortunalety, I think we will
have to continue to include <xprt_quic-t.h> to use the trace API
into this module.
In ssl_action_wait_for_hs() the local variables called "cs" is just a
copy of s->scf that's only used once, so it can be removed. In addition
the check was removed as well since it's not possible to have a NULL SC
on a stream.
There's no more reason for keepin the code and definitions in conn_stream,
let's move all that to stconn. The alphabetical ordering of include files
was adjusted.
This file contains all the stream-connector functions that are specific
to application layers of type stream. So let's name it accordingly so
that it's easier to figure what's located there.
The alphabetical ordering of include files was preserved.
This applies the change so that the applet code stops using ci_putchk()
and friends everywhere possible, for the much saferapplet_put*() instead.
The change is mechanical but large. Two or three functions used to have no
appctx and a cs derived from the appctx instead, which was a reminiscence
of old times' stream_interface. These were simply changed to directly take
the appctx. No sensitive change was performed, and the old (more complex)
API is still usable when needed (e.g. the channel is already known).
The change touched roughly a hundred of locations, with no less than 124
lines removed.
It's worth noting that the stats applet, the oldest of the series, could
get a serious lifting, as it's still very channel-centric instead of
propagating the appctx along the chain. Given that this code doesn't
change often, there's no emergency to clean it up but it would look
better.
This renames the "struct conn_stream" to "struct stconn" and updates
the descriptions in all comments (and the rare help descriptions) to
"stream connector" or "connector". This touches a lot of files but
the change is minimal. The local variables were not even renamed, so
there's still a lot of "cs" everywhere.
This changes all main uses of cs->endp->flags to the sc_ep_*() equivalent
by applying coccinelle script cs_endp_flags.cocci.
Note: 143 locations were touched, manually reviewed and found to be OK,
except a single one that was adjusted in cs_reset_endp() where the flags
are read and filtered to be used as-is and not as a boolean, hence was
replaced with sc_ep_get() & $FLAGS.
The script was applied with all includes:
spatch --in-place --recursive-includes -I include --sp-file $script $files
When HAProxy is linked to an OpenSSLv3 library, this option can be used
to load a provider during init. You can specify multiple ssl-provider
options, which will be loaded in the order they appear. This does not
prevent OpenSSL from parsing its own configuration file in which some
other providers might be specified.
A linked list of the providers loaded from the configuration file is
kept so that all those providers can be unloaded during cleanup. The
providers loaded directly by OpenSSL will be freed by OpenSSL.
This one is the pointer to the conn_stream which is always in the
endpoint that is always present in the appctx, thus it's not needed.
This patch removes it and replaces it with appctx_cs() instead. A
few occurences that were using __cs_strm(appctx->owner) were moved
directly to appctx_strm() which does the equivalent.
Low footprint client machines may not have enough memory to download a
complete 16KB TLS record at once. With the new option the maximum
record size can be defined on the server side.
Note: Before limiting the the record size on the server side, a client should
consider using the TLS Maximum Fragment Length Negotiation Extension defined
in RFC6066.
This patch fixes GitHub issue #1679.
There were plenty of leftovers from old code that were never removed
and that are not needed at all since these files do not use any
definition depending on fcntl.h, let's drop them.
Some older systems may routinely return EWOULDBLOCK for some syscalls
while we tend to check only for EAGAIN nowadays. Modern systems define
EWOULDBLOCK as EAGAIN so that solves it, but on a few older ones (AIX,
VMS etc) both are different, and for portability we'd need to test for
both or we never know if we risk to confuse some status codes with
plain errors.
There were few entries, the most annoying ones are the switch/case
because they require to only add the entry when it differs, but the
other ones are really trivial.
Transport layers (raw_sock, ssl_sock, xprt_handshake and xprt_quic)
were using 4 constructors and 2 destructors. The 4 constructors were
replaced with INITCALL and the destructors with REGISTER_POST_DEINIT()
so that we do not depend on this anymore.
Starting from OpenSSLv3, providers are at the core of cryptography
functions. Depending on the provider used, the way the SSL
functionalities work could change. This new 'show ssl providers' CLI
command allows to show what providers were loaded by the SSL library.
This is required because the provider configuration is exclusively done
in the OpenSSL configuration file (/usr/local/ssl/openssl.cnf for
instance).
A new line is also added to the 'haproxy -vv' output containing the same
information.
The DH parameters used for OpenSSL versions 1.1.1 and earlier where
changed. For OpenSSL 1.0.2 and LibreSSL the newly introduced
ssl_get_dh_by_nid function is not used since we keep the original
parameters.
DHE ciphers do not present a security risk if the key is big enough but
they are slow and mostly obsoleted by ECDHE. This patch removes any
default DH parameters. This will effectively disable all DHE ciphers
unless a global ssl-dh-param-file is defined, or
tune.ssl.default-dh-param is set, or a frontend has DH parameters
included in its PEM certificate. In this latter case, only the frontends
that have DH parameters will have DHE ciphers enabled.
Adding explicitely a DHE ciphers in a "bind" line will not be enough to
actually enable DHE. We would still need to know which DH parameters to
use so one of the three conditions described above must be met.
This request was described in GitHub issue #1604.
RFC7919 defined sets of DH parameters supposedly strong enough to be
used safely. We will then use them when we can instead of our hard coded
ones (namely the ffdhe2048 and ffdhe4096 named groups).
The ffdhe2048 and ffdhe4096 named groups were integrated in OpenSSL
starting with version 1.1.1. Instead of duplicating those parameters in
haproxy for older versions of OpenSSL, we will keep using our own
parameters when they are not provided by the SSL library.
We will also need to keep our 1024 bits DH parameters since they are
considered not safe enough to have a dedicated named group in RFC7919
but we must still keep it for retrocompatibility with old Java clients.
This request was described in GitHub issue #1604.
Remaining flags and associated functions are move in the conn-stream
scope. These flags are added on the endpoint and not the conn-stream
itself. This way it will be possible to get them from the mux or the
applet. The functions to get or set these flags are renamed accordingly with
the "cs_" prefix and updated to manipualte a conn-stream instead of a
stream-interface.
At many places, we now use the new CS functions to get a stream or a channel
from a conn-stream instead of using the stream-interface API. It is the
first step to reduce the scope of the stream-interfaces. The main change
here is about the applet I/O callback functions. Before the refactoring, the
stream-interface was the appctx owner. Thus, it was heavily used. Now, as
far as possible,the conn-stream is used. Of course, it remains many calls to
the stream-interface API.
Some CS flags, only related to the endpoint, are moved into the endpoint
struct. More will probably moved later. Those ones are not critical. So it
is pretty safe to move them now and this will ease next changes.
First gcc, then now coverity report possible null derefs in situations
where we know these cannot happen since we call the functions in
contexts that guarantee the existence of the connection and the method
used. Let's introduce an unchecked version of the function for such
cases, just like we had to do with objt_*. This allows us to remove the
ALREADY_CHECKED() statements (which coverity doesn't see), and addresses
github issues #1643, #1644, #1647.
Some compilers see a possible null deref after conn_get_ssl_sock_ctx()
in ssl_sock_parse_heartbeat, which cannot happen there, so let's mark
it as safe. No backport needed.
The SSL functions must not use conn->xprt_ctx anymore but find the context
by calling conn_get_ssl_sock_ctx(), which will properly pass through the
transport layers to retrieve the desired information. Otherwise when the
functions are called on a QUIC connection, they refuse to work for not
being called on the proper transport.
Historically there was a single way to have an SSL transport on a
connection, so detecting if the transport layer was SSL and a context
was present was sufficient to detect SSL. With QUIC, things have changed
because QUIC also relies on SSL, but the context is embedded inside the
quic_conn and the transport layer doesn't match expectations outside,
making it difficult to detect that SSL is in use over the connection.
The approach taken here to improve this consists in adding a new method
at the transport layer, get_ssl_sock_ctx(), to retrieve this often needed
ssl_sock_ctx, and to use this to detect the presence of SSL. This will
even allow some simplifications and cleanups to be made in the SSL code
itself, and QUIC will be able to provide one to export its ssl_sock_ctx.
Certain functions cannot be called on an FD-less conn because they are
normally called as part of the protocol-specific setup/teardown sequence.
Better place a few BUG_ON() to make sure none of them is called in other
situations. If any of them would trigger in ambiguous conditions, it would
always be possible to replace it with an error.
The OpenSSL engine API is deprecated starting with OpenSSL 3.0.
In order to have a clean build this feature is now disabled by default.
It can be reactivated with USE_ENGINE=1 on the build line.
ASAN complains about the SNI expression not being free upon an haproxy
-c. Indeed the httpclient is now initialized with a sni expression and
this one is never free in the server release code.
Must be backported in 2.5 and could be backported in every stable
versions.
frontend and backend conn-streams are now directly accesible from the
stream. This way, and with some other changes, it will be possible to remove
the stream-interfaces from the stream structure.
Because appctx is now an endpoint of the conn-stream, there is no reason to
still have the stream-interface as appctx owner. Thus, the conn-stream is
now the appctx owner.
Thanks to previous changes, it is now possible to set an appctx as endpoint
for a conn-stream. This means the appctx is no longer linked to the
stream-interface but to the conn-stream. Thus, a pointer to the conn-stream
is explicitly stored in the stream-interface. The endpoint (connection or
appctx) can be retrieved via the conn-stream.
When calling ssl_ocsp_response_print which is used to display an OCSP
response's details when calling the "show ssl ocsp-response" on the CLI,
we use the BIO_read function that copies an OpenSSL BIO into a trash.
The return value was not checked though, which could lead to some
crashes since BIO_read can return a negative value in case of error.
This patch should be backported to 2.5.
When calling the "show ssl ocsp-response" CLI command some OpenSSL
objects need to be created in order to get some information related to
the OCSP response and some of them were not freed.
It should be backported to 2.5.
The b_istput function called to append the last data block to the end of
an OCSP response's detailed output was not checked in
ssl_ocsp_response_print. The ssl_ocsp_response_print return value checks
were added as well since some of them were missing.
This error was raised by Coverity (CID 1469513).
This patch fixes GitHub issue #1541.
It can be backported to 2.5.
The SSL_CTX_set_tmp_dh_callback function was marked as deprecated in
OpenSSLv3 so this patch replaces this callback mechanism by a direct set
of DH parameters during init.
DH structure is a low-level one that should not be used anymore with
OpenSSLv3. All functions working on DH were marked as deprecated and
this patch replaces the ones we used with new APIs recommended in
OpenSSLv3, be it in the migration guide or the multiple new manpages
they created.
This patch replaces all mentions of the DH type by the HASSL_DH one,
which will be replaced by EVP_PKEY with OpenSSLv3 and will remain DH on
older versions. It also uses all the newly created helper functions that
enable for instance to load DH parameters from a file into an EVP_PKEY,
or to set DH parameters into an SSL_CTX for use in a DHE negotiation.
The following deprecated functions will effectively disappear when
building with OpenSSLv3 : DH_set0_pqg, PEM_read_bio_DHparams, DH_new,
DH_free, DH_up_ref, SSL_CTX_set_tmp_dh.
Starting from OpenSSLv3, we won't rely on the
SSL_CTX_set_tmp_dh_callback mechanism so we will need to know the DH
size we want to use during init. In order for the default DH param size
to be used when no RSA or DSA private key can be found for a given bind
line, we will need to know the default size we want to use (which was
not possible the way the code was built, since the global default dh
size was set too late.
The current way the local DH structures are built relies on the fact
that the ssl_get_tmp_dh function would only be called as a callback
during a DHE negotiation, so after all the SSL contexts are built and
the init is over. With OpenSSLv3, this function will now be called
during init, so before those objects are curretly built.
This patch ensures that when calling ssl_get_tmp_dh and trying to use
one of or hard-coded DH parameters, it will be created if it did not
exist yet.
The current DH parameter creation is also kept so that with versions
before OpenSSLv3 we don't end up creating this DH object during a
handshake.
Starting from OpenSSLv3, the DH_set0_pqg function is deprecated and the
use of DH objects directly is advised against so this new helper
function will be used to convert our hard-coded DH parameters into an
EVP_PKEY. It relies on the new OSSL_PARAM mechanism, as described in the
EVP_PKEY-DH manpage.
This helper function will only be used with OpenSSLv3. It simply sets in
an SSL_CTX a set of DH parameters of the same size as a certificate's
private key. This logic is the same as the one used with older versions,
it simply relies on new APIs.
If no pkey can be found the SSL_CTX_set_dh_auto function wll be called,
making the SSL_CTX rely on DH parameters provided by OpenSSL in case of
DHE negotiation.
Starting from OpenSSLv3, the SSL_CTX_set_tmp_dh function is deprecated
and it should be replaced by SSL_CTX_set0_tmp_dh_pkey, which takes an
EVP_PKEY instead of a DH parameter. Since this function is new to
OpenSSLv3 and its use requires an extra EVP_PKEY_up_ref call, we will
keep the two versions side by side, otherwise it would require to get
rid of all DH references in older OpenSSL versions as well.
This helper function is not used yet so this commit should be strictly
iso-functional, regardless of the OpenSSL version.
In the upcoming OpenSSLv3 specific patches, we will make use of the
newly created ssl_get_tmp_dh that returns an EVP_PKEY containing DH
parameters of the same size as a bind line's RSA or DSA private key.
The previously named ssl_get_tmp_dh function was renamed
ssl_get_tmp_dh_cbk because it is only used as a callback passed to
OpenSSL through SSL_CTX_set_tmp_dh_callback calls.
This new function makes use of the new OpenSSLv3 APIs that should be
used to load DH parameters from a file (or a BIO in this case) and that
should replace the deprecated PEM_read_bio_DHparams function.
Note that this function returns an EVP_PKEY when using OpenSSLv3 since
they now advise against using low level structures such as DH ones.
This helper function is not used yet so this commit should be stricly
iso-functional, regardless of the OpenSSL version.
ERR_func_error_string does not return anything anymore with OpenSSLv3,
it can be replaced by ERR_peek_error_func which did not exist on
previous versions.
HMAC_Init_ex being a function that acts on a low-level HMAC_CTX
structure was marked as deprecated in OpenSSLv3.
This patch replaces this call by EVP_MAC_CTX_set_params, as advised in
the migration_guide, and uses the new OSSL_PARAM mechanism to configure
the MAC context, as described in the EVP_MAC and EVP_MAC-HMAC manpages.
SSL_CTX_set_tlsext_ticket_key_cb was deprecated on OpenSSLv3 because it
uses an HMAC_pointer which is deprecated as well. According to the v3's
manpage it should be replaced by SSL_CTX_set_tlsext_ticket_key_evp_cb
which uses a EVP_MAC_CTX pointer.
This new callback was introduced in OpenSSLv3 so we need to keep the two
calls in the source base and to split the usage depending on the OpenSSL
version.
In the context of the 'generate-certificates' bind line option, if an
'ecdhe' option is present on the bind line as well, we use the
SSL_CTX_set_tmp_ecdh function which was marked as deprecated in
OpenSSLv3. As advised in the SSL_CTX_set_tmp_ecdh manpage, this function
should be replaced by the SSL_CTX_set1_groups one (or the
SSL_CTX_set1_curves one in our case which does the same but existed on
older OpenSSL versions as well).
The ECDHE behaviour with OpenSSL 1.0.2 is not the same when using the
SSL_CTX_set1_curves function as the one we have on newer versions.
Instead of looking for a code that would work exactly the same
regardless of the OpenSSL version, we will keep the original code on
1.0.2 and use newer APIs for other versions.
This patch should be strictly isofunctional.
The ecdhe option relies on the SSL_CTX_set_tmp_ecdh function which has
been marked as deprecated in OpenSSLv3. As advised in the
SSL_CTX_set_tmp_ecdh manpage, this function should be replaced by the
SSL_CTX_set1_groups one (or the SSL_CTX_set1_curves one in our case
which does the same but existed on older OpenSSL versions as well).
When using the "curves" option we have a different behaviour with
OpenSSL1.0.2 compared to later versions. On this early version an SSL
backend using a P-256 ECDSA certificate manages to connect to an SSL
frontend having a "curves P-384" option (when it fails with later
versions).
Even if the API used for later version than OpenSSL 1.0.2 already
existed then, for some reason the behaviour is not the same on the older
version which explains why the original code with the deprecated API is
kept for this version (otherwise we would risk breaking everything on a
version that might still be used by some people despite being pretty old).
This patch should be strictly isofunctional.
There were empty lines in the output of the CLI's "show ssl
ocsp-response <id>" command. The plain "show ssl ocsp-response" command
(without parameter) was already managed in commit
cc750efbc5. This patch adds an extra space
to those lines so that the only existing empty lines actually mark the
end of the output. This requires to post-process the buffer filled by
OpenSSL's OCSP_RESPONSE_print function (which produces the output of the
"openssl ocsp -respin <ocsp.pem>" command). This way the output of our
command still looks the same as openssl's one.
Must be backported in 2.5.
Do not proceed to direct accept when creating a new quic_conn. Wait for
the QUIC handshake to succeeds to insert the quic_conn in the accept
queue. A tasklet is then woken up to call listener_accept to accept the
quic_conn.
The most important effect is that the connection/mux layers are not
instantiated at the same time as the quic_conn. This forces to delay
some process to be sure that the mux is allocated :
* initialization of mux transport parameters
* installation of the app-ops
Also, the mux instance is not checked now to wake up the quic_conn
tasklet. This is safe because the xprt-quic code is now ready to handle
the absence of the connection/mux layers.
Note that this commit has a deep impact as it changes significantly the
lower QUIC architecture. Most notably, it breaks the 0-RTT feature.
Fix potential null pointer dereference. In fact, this case is not
possible, only a mistake in SSL ex-data initialization may cause it :
either connection is set or quic_conn, which allows to retrieve
the bind_conf.
A BUG_ON was already present but this does not cover release build.
Allow to register quic_conn as ex-data in SSL callbacks. A new index is
used to identify it as ssl_qc_app_data_index.
Replace connection by quic_conn as SSL ex-data when initializing the QUIC
SSL session. When using SSL callbacks in QUIC context, the connection is
now NULL. Used quic_conn instead to retrieve the required parameters.
Also clean up
The same changes are conducted inside the QUIC SSL methods of xprt-quic
: connection instance usage is replaced by quic_conn.
If an error is raised during the ClientHello callback on the server side
(ssl_sock_switchctx_cbk), the servername callback won't be called and
the client's SNI will not be saved in the SSL context. But since we use
the SSL_get_servername function to return this SNI in the ssl_fc_sni
sample fetch, that means that in case of error, such as an SNI mismatch
with a frontend having the strict-sni option enabled, the sample fetch
would not work (making strict-sni related errors hard to debug).
This patch fixes that by storing the SNI as an ex_data in the SSL
context in case the ClientHello callback returns an error. This way the
sample fetch can fallback to getting the SNI this way. It will still
first call the SSL_get_servername function first since it is the proper
way of getting a client's SNI when the handshake succeeded.
In order to avoid memory allocations are runtime into this highly used
runtime function, a new memory pool was created to store those client
SNIs. Its entry size is set to 256 bytes since SNIs can't be longer than
255 characters.
This fixes GitHub #1484.
It can be backported in 2.5.
This patch unlinks and frees the ckch instance linked to a server during
the free of this server.
This could have locked certificates in a "Used" state when removing
servers dynamically from the CLI. And could provoke a segfault once we
try to dynamically update the certificate after that.
This must be backported as far as 2.4.
A lot of free are missing in ssl_sock_free_srv_ctx(), this could result
in memory leaking when removing dynamically a server via the CLI.
This must be backported in every branches, by removing the fields that
does not exist in the previous branches.
This bug was introduced by d817dc73 ("MEDIUM: ssl: Load client
certificates in a ckch for backend servers") in which the creation of
the SSL_CTX for a server was moved to the configuration parser when
using a "crt" keyword instead of being done in ssl_sock_prepare_srv_ctx().
The patch 0498fa40 ("BUG/MINOR: ssl: Default-server configuration ignored by
server") made it worse by setting the same SSL_CTX for every servers
using a default-server. Resulting in any SSL option on a server applied
to every server in its backend.
This patch fixes the issue by reintroducing a string which store the
path of certificate inside the server structure, and loading the
certificate in ssl_sock_prepare_srv_ctx() again.
This is a quick fix to backport, a cleaner way can be achieve by always
creating the SSL_CTX in ssl_sock_prepare_srv_ctx() and splitting
properly the ssl_sock_load_srv_cert() function.
This patch fixes issue #1488.
Must be backported as far as 2.4.
Since this case was already met previously with commit 655dec81b
("BUG/MINOR: backend: do not set sni on connection reuse"), let's make
sure that we don't change reused connection settings. This could be
generalized to most settings that are only in effect before the handshake
in fact (like set_alpn and a few other ones).
There were empty lines in the output of the CLI's "show ssl
ocsp-response" command (after the certificate ID and between two
certificates). This patch removes them since an empty line should mark
the end of the output.
Must be backported in 2.5.
If the ClientHello callback does not manage to find a correct QUIC transport
parameters extension, we immediately close the connection with
missing_extension(109) as TLS alert which is turned into 0x16d QUIC connection
error.
We set this TLS error when no application protocol could be negotiated
via the TLS callback concerned. It is converted as a QUIC CRYPTO_ERROR
error (0x178).
SSL counters were added with commit d0447a7c3 ("MINOR: ssl: add counters
for ssl sessions") in 2.4, but their updates were not atomic, so it's
likely that under significant loads they are not correct.
This needs to be backported to 2.4.
If we want to run quic-tracker against haproxy, we must at least
support the draft version of the TLS extension for the QUIC transport
parameters (0xffa5). quic-tracker QUIC version is draft-29 at this time.
We select this depending on the QUIC version. If draft, we select the
draft TLS extension.
Since commit c2aae74 ("MEDIUM: ssl: Handle early data with OpenSSL
1.1.1"), the codepath of the clientHello callback changed, letting an
unknown SNI escape with a 'return 1' instead of passing through the
abort label.
An error was still emitted because the frontend continued the handshake
with the initial_ctx, which can't be used to achieve an handshake.
However, it had the ugly side effect of letting the request pass in the
case of a TLS resume. Which could be surprising when combining strict-sni
with the removing of a crt-list entry over the CLI for example. (like
its done in the ssl/new_del_ssl_crlfile.vtc reg-test).
This patch switches the code path of the allow_early and abort label, so
the default code path is the abort one, letting the clientHello returns
the correct SSL_AD_UNRECOGNIZED_NAME in case of errors.
Which means the client will now receive:
OpenSSL error[0x14094458] ssl3_read_bytes: tlsv1 unrecognized name
Instead of:
OpenSSL error[0x14094410] ssl3_read_bytes: sslv3 alert handshake failure
Which was the error emitted before HAProxy 1.8.
This patch must be carrefuly backported as far as 1.8 once we validated
its impact.
