Historically, the ADDR pseudo-type did not exist. So when IPV6 support
was added to existing IPV4 sample fetches (e.g.: src,dst,hdr_ip...) the
expected out_type in related sample definitions was left on IPV4 because
it was required to declare the out_type as the lowest common denominator
(the type that can be casted into all other ones) to make compatibility
checks at parse time work properly.
However, now that ADDR pseudo-type may safely be used as out_type since
("MEDIUM: sample: add missing ADDR=>? compatibility matrix entries"), we
can use ADDR for fetches that may output both IPV4 and IPV6 at runtime.
One added benefit on top of making the code less confusing is that
'haproxy -dKsmp' output will now show "addr" instead of "ipv4" for such
fetches, so the 'haproxy -dKsmp' output better complies with the fetches
signatures from the documentation.
out_ip fetch, which returns an ip according to the doc, was purposely
left as is (returning IPV4) since the smp_fetch_url_ip() implementation
forces output type to IPV4 anyway, and since this is an historical fetch
I prefer not to touch it to prevent any regression. However if
smp_fetch_url_ip() were to be fixed to also return IPV6 in the future,
then its expected out_type may be changed to ADDR as well.
Multiple notes in the code were updated to mention that the appropriate
pseudo-type may be used instead of the lowest common denominator for
out_type when available.
The commit 5e1b0e7bf ("BUG/MEDIUM: connection: Clear flags when a conn is
removed from an idle list") introduced a regression. CO_FL_SAFE_LIST and
CO_FL_IDLE_LIST flags are used when the connection is released to properly
decrement used/idle connection counters. if a connection is idle, these
flags must be preserved till the connection is really released. It may be
removed from the list but not immediately released. If these flags are lost
when it is finally released, the current number of used connections is
erroneously decremented. If means this counter may become negative and the
counters tracking the number of idle connecitons is not decremented,
suggesting a leak.
So, the above commit is reverted and instead we improve a bit the way to
detect an idle connection. The function conn_get_idle_flag() must now be
used to know if a connection is in an idle list. It returns the connection
flag corresponding to the idle list if the connection is idle
(CO_FL_SAFE_LIST or CO_FL_IDLE_LIST) or 0 otherwise. But if the connection
is scheduled to be removed, 0 is also returned, regardless the connection
flags.
This new function is used when the connection is temporarily removed from
the list to be used, mainly in muxes.
This patch should fix#2078 and #2057. It must be backported as far as 2.2.
Add a BUG_ON() in conn_free(), to check that when we're freeing a
connection, it is not still in the idle connections tree, otherwise the
next thread that will try to use it will probably crash.
Idle connections do not work on 32-bit machines due to an alignment issue
causing the connection nodes to be indexed with their lower 32-bits set to
zero and the higher 32 ones containing the 32 lower bitss of the hash. The
cause is the use of ebmb_node with an aligned data, as on this platform
ebmb_node is only 32-bit aligned, leaving a hole before the following hash
which is a uint64_t:
$ pahole -C conn_hash_node ./haproxy
struct conn_hash_node {
struct ebmb_node node; /* 0 20 */
/* XXX 4 bytes hole, try to pack */
int64_t hash; /* 24 8 */
struct connection * conn; /* 32 4 */
/* size: 40, cachelines: 1, members: 3 */
/* sum members: 32, holes: 1, sum holes: 4 */
/* padding: 4 */
/* last cacheline: 40 bytes */
};
Instead, eb64 nodes should be used when it comes to simply storing a
64-bit key, and that is what this patch does.
For backports, a variant consisting in simply marking the "hash" member
with a "packed" attribute on the struct also does the job (tested), and
might be preferable if the fix is difficult to adapt. Only 2.6 and 2.5
are affected by this.
smp_fc_http_major may be used to return the http version as an integer
used on the frontend or backend side. Previously, the handler only
checked for version 2 or 1 as a fallback. Extend it to support version 3
with the QUIC mux.
The check struct had a "cs" field renamed to "sc", which also required
a tiny update to a few functions using it to distinguish a check from
a stream (log.c, payload.c, ssl_sample.c, tcp_sample.c, tcpcheck.c,
connection.c).
Function arguments and local variables called "cs" were renamed to "sc".
The presence of one "cs=" in the debugging traces was also turned to
"sc=" for consistency.
There's no more reason for keepin the code and definitions in conn_stream,
let's move all that to stconn. The alphabetical ordering of include files
was adjusted.
This file contains all the stream-connector functions that are specific
to application layers of type stream. So let's name it accordingly so
that it's easier to figure what's located there.
The alphabetical ordering of include files was preserved.
It returns an stconn from a connection and not the opposite, so the name
change was more appropriate. In addition it was moved to connection.h
which manipulates the connection stuff, and it happens that only
connection.c uses it.
These functions return the app-layer associated with an stconn, which
is a check, a stream or a stream's task. They're used a lot to access
channels, flags and for waking up tasks. Let's just name them
appropriately for the stream connector.
For historical reasons (stream-interface and connections), we used to
require two independent fields for the application level callbacks and
the transport-level functions. Over time the distinction faded away so
much that the low-level functions became specific to the application
and conversely. For example, applets may only work with streams on top
since they rely on the channels, and the stream-level functions differ
between applets and connections. Right now the application level only
contains a wake() callback and the low-level ones contain the functions
that act at the lower level to perform the shutr/shutw and at the upper
level to notify about readability and writability. Let's just merge them
together into a single set and get rid of this confusing distinction.
Note that the check ops do not define any app-level function since these
are only called by streams.
This renames the "struct conn_stream" to "struct stconn" and updates
the descriptions in all comments (and the rare help descriptions) to
"stream connector" or "connector". This touches a lot of files but
the change is minimal. The local variables were not even renamed, so
there's still a lot of "cs" everywhere.
In order to be able to check compatibility between muxes and transport
layers, we'll need a new flag to tag muxes that work on framed transport
layers like QUIC. Only QUIC has this flag now.
That's similar to what was done for conn_streams and connections. The
flags were only set exactly when the relevant pointers were allocated,
so better test the pointer than the flag and stop setting the flag.
Just like for the conn_stream, now that these addresses are dynamically
allocated, there is no single case where the pointer is set without the
corresponding flag, and the flag is used as a permission to dereference
the pointer. Let's just replace the test of the flag with a test of the
pointer and remove all flag assignment. This makes the code clearer
(especially in "if" conditions) and saves the need for future code to
think about properly setting the flag after setting the pointer.
This adds a deinit_idle_conns() function that's called on deinit to
release the per-thread idle connection management tasks. The global
task was already taken care of.
Some older systems may routinely return EWOULDBLOCK for some syscalls
while we tend to check only for EAGAIN nowadays. Modern systems define
EWOULDBLOCK as EAGAIN so that solves it, but on a few older ones (AIX,
VMS etc) both are different, and for portability we'd need to test for
both or we never know if we risk to confuse some status codes with
plain errors.
There were few entries, the most annoying ones are the switch/case
because they require to only add the entry when it differs, but the
other ones are really trivial.
The issue only concerns the backend connection. The conn-stream is now owned
by the stream and persists during all the stream life. Thus we must not
crush it when the backend connection is released.
It is 2.6-specific. No backport is needed.
The source and destination addresses at the applicative layer are moved from
the stream-interface to the conn-stream. This simplifies a bit the code and
it is a logicial step to remove the stream-interface.
It was supposed to be there, and probably was not placed there due to
historic limitations in listener_accept(), but now there does not seem
to be a remaining valid reason for keeping the quic_conn out of the
handle. In addition in new_quic_cli_conn() the handle->fd was incorrectly
set to the listener's FD.
Certain functions cannot be called on an FD-less conn because they are
normally called as part of the protocol-specific setup/teardown sequence.
Better place a few BUG_ON() to make sure none of them is called in other
situations. If any of them would trigger in ambiguous conditions, it would
always be possible to replace it with an error.
In "haproxy -vv" we produce a list of available muxes with their
capabilities, but that list is often quite large for terminals due
to excess of spaces, so let's reduce them a bit to make the output
more readable.
This one is referenced in initcalls by its pointer, it makes no sense
to declare it inline. At best it causes function duplication, at worst
it doesn't build on older compilers.
With BUG_ON() being enabled by default it is more useful to use a BUG_ON()
instead of an effectively never-taken if, as any incorrect assumptions will
become much more visible.
see 488ee7fb6 ("BUG/MAJOR: proxy_protocol: Properly validate TLV lengths")
Transform the unreachability comment into a call to `my_unreachable()` to allow
the compiler from benefitting from it.
see d1b15b6e9 ("MINOR: proxy_protocol: Ingest PP2_TYPE_UNIQUE_ID on incoming connections")
see 615f81eb5 ("MINOR: connection: Use a `struct ist` to store proxy_authority")
Thanks to all previous changes, it is now possible to move the
stream-interface into the conn-stream. To do so, some SI functions are
removed and their conn-stream counterparts are added. In addition, the
conn-stream is now responsible to create and release the
stream-interface. While the stream-interfaces were inlined in the stream
structure, there is now a pointer in the conn-stream. stream-interfaces are
now dynamically allocated. Thus a dedicated pool is added. It is a temporary
change because, at the end, the stream-interface structure will most
probably disappear.
frontend and backend conn-streams are now directly accesible from the
stream. This way, and with some other changes, it will be possible to remove
the stream-interfaces from the stream structure.
Thanks to previous changes, it is now possible to set an appctx as endpoint
for a conn-stream. This means the appctx is no longer linked to the
stream-interface but to the conn-stream. Thus, a pointer to the conn-stream
is explicitly stored in the stream-interface. The endpoint (connection or
appctx) can be retrieved via the conn-stream.
Let's not use a trash there anymore. The function is called at very
early boot (for "haproxy -vv"), and the need for a trash prevents the
arguments from being parsed earlier. Moreover, the function only uses
a FILE* on output with fprintf(), so there's not even any benefit in
using chunk_printf() on an intermediary variable, emitting the output
directly is both clearer and safer.
Commit 3d2093af9 ("MINOR: connection: Add a connection error code sample
fetch") added these convenient sample-fetch functions but it appears that
due to a misunderstanding the redundant "conn" part was kept in their
name, causing confusion, since "fc" already stands for "front connection".
Let's simply call them "fc_err" and "bc_err" to match all other related
ones before they appear in a final release. The VTC they appeared in were
also updated, and the alpha sort in the keywords table updated.
Cc: William Lallemand <wlallemand@haproxy.org>
Add a new parameter force_mux_ops. This will be useful to specify an
alternative to the srv->mux_proto field. If non-NULL, it will be use to
force the mux protocol wether srv->mux_proto is set or not.
This argument will become useful to install a mux for non-standard
streams, most notably websocket streams.
Implement a new function to update the ALPN on an existing connection.
on an existing connection. The ALPN from the ssl context can be checked
to update the ALPN only if it is a subset of the context value.
This method will be useful to change a connection ALPN for websocket,
must notably if the server does not support h2 websocket through the
rfc8441 Extended Connect.
Just like for the PROXY protocol, when the NetScaler Client IP insertion
header is received, the retrieved client source and destination addresses
are set at the session level. This leaves those at the connection level
intact.
When PROXY protocol line is received, the retrieved client source and
destination addresses are set at the session level. This leaves those at the
connection level intact.
If the stream exists, the frontend stream-interface is used to get the
client source and destination addresses when the proxy line is built. For
now, stream-interface or session addresses are never set. So, thanks to the
fallback mechanism, no changes are expected with this patch. But its purpose
is to rely on addresses at the appropriate level when set instead of those
at the connection level.
Remove the zeroing of an idle connection node on remove from a tree.
This is not needed and should improve slightly the performance of idle
connection usage. Besides, it breaks the memory poisoning feature.
The remaining large functions are those allocating/initializing and
occasionally freeing connections, conn_streams and sockaddr. Let's
move them to connection.c. In fact, cs_free() is the only one-liner
but let's move it along with the other ones since a call will be
small compared to the rest of the work done there.
