b_del() is used in :
- mux_h2 with the demux buffer : always processes input data
- checks with output data though output is not considered at all there
- b_eat() which is not used anywhere
- co_skip() where the len is always <= output
Thus the distinction for output data is not needed anymore and the
decrement can be made inconditionally in co_skip().
This is intentionally the minimal and safest set of changes, some cleanups
area still required. These changes are quite tricky and cannot be
independantly tested, so it's important to keep this patch as bisectable
as possible.
buf_empty and buf_wanted were changed and are now exactly similar since
there's no <p> member in the structure anymore. Given that no test is
ever made in the code to check that buf == &buf_wanted, it may be possible
that we don't need to have two anymore, unless some buf_empty tests have
precedence. This will have to be investigated.
A significant part of this commit affects the HTTP compression code,
which used to deeply manipulate the input and output buffers without
any reasonable solution for a better abstraction. For this reason, if
any regression is met and designates this patch as the culprit, it is
important to run tests which specifically involve compression or which
definitely don't use it in order to spot the issue.
Cc: Olivier Houchard <ohouchard@haproxy.com>
For the same consistency reasons, let's use b_empty() at the few places
where an empty buffer is expected, or c_empty() if it's done on a channel.
Some of these places were there to realign the buffer so
{b,c}_realign_if_empty() was used instead.
Now that there are no more users requiring to modify the buffer anymore,
switch these ones to const char and const buffer. This will make it more
obvious next time send functions are tempted to modify the buffer's output
count. Minor adaptations were necessary at a few call places which were
using char due to the function's previous prototype.
Till now the callers had to know which one to call for specific use cases.
Let's fuse them now since a single one will remain after the API migration.
Given that bi_del() may only be used where o==0, just combine the two tests
by first removing output data then only input.
This function was sometimes used from a channel and sometimes from a buffer.
In both cases it requires knowledge of the size of the output data (to skip
them). Here the split ensures the channel can deal with this point, and that
other places not having output data can continue to work.
These ones manipulate the output data count which will be specific to
the channel soon, so prepare the call points to use the channel only.
The b_* functions are now unused and were removed.
The few call places where it's used can use the trash as a swap buffer,
which is made for this exact purpose. This way we can rely on the
generic b_slow_realign() call.
Where relevant, the channel version is used instead. The buffer version
was ported to be more generic and now takes a swap buffer and the output
byte count to know where to set the alignment point. The H2 mux still
uses buffer_slow_realign() with buf->o but it will change later.
This adds :
- c_orig() : channel buffer's origin
- c_size() : channel buffer's size
- c_wrap() : channel buffer's wrapping location
- c_data() : channel buffer's total data count
- c_room() : room left in channel buffer's
- c_empty() : true if channel buffer is empty
- c_full() : true if channel buffer is full
- c_ptr() : pointer to an offset relative to input data in the buffer
- c_adv() : advances the channel's buffer (bytes become part of output)
- c_rew() : rewinds the channel's buffer (output bytes not output anymore)
- c_realign_if_empty() : realigns the buffer if it's empty
- co_data() : # of output data
- co_head() : beginning of output data
- co_tail() : end of output data
- ci_data() : # of input data
- ci_head() : beginning of input data
- ci_tail() : end of input data
- ci_stop() : location after ci_tail()
- ci_next() : pointer to next input byte
And for the ci_* / co_* functions above, the "__*" variants which disable
wrapping checks, and the "_ofs" variants which return an offset relative to
the buffer's origin instead.
Up until now, a tasklet couldn't be free'd while it was in the list, it is
no longer the case, so make sure we remove it from the list before freeing it.
To do so, we have to make sure we correctly initialize it, so use LIST_INIT,
instead of setting the pointers to NULL.
To make sure we don't inadvertently insert task in the global runqueue,
while only the local runqueue is used without threads, make its definition
and usage conditional on USE_THREAD.
When building without threads enabled, instead of just using the global
runqueue, just use the local runqueue associated with the only thread, as
that's what is now expected for a single thread in prcoess_runnable_tasks().
This should fix haproxy when built without threads.
When an applet is created, let's assign it the same nice value as the task
of the stream which owns it. It ensures that fairness is properly propagated
to applets, and that the CLI can regain a low latency behaviour again. Huge
differences have been seen under extreme loads, with the CLI being called
every 200 microseconds instead of 11 milliseconds.
This function returns true is some notifications are registered.
This function is usefull for the following patch
BUG/MEDIUM: lua/socket: Sheduling error on write: may dead-lock
It should be backported in 1.6, 1.7 and 1.8
Don't forget to increase tasks_run_queue when we're adding a task to the
tasklet list, and to decrease it when we remove a task from a runqueue,
or its value won't be accurate, and could lead to tasks not being executed
when put in the global run queue.
1.9-dev only, no backport is needed.
There's no real reason to have a specific scheduler for applets anymore, so
nuke it and just use tasks. This comes with some benefits, the first one
being that applets cannot induce high latencies anymore since they share
nice values with other tasks. Later it will be possible to configure the
applets' nice value. The second benefit is that the applet scheduler was
not very thread-friendly, having a big lock around it in prevision of this
change. Thus applet-intensive workloads should now scale much better with
threads.
Some more improvement is possible now : some applets also use a task to
handle timers and timeouts. These ones could now be simplified to use only
one task.
Introduce tasklets, lightweight tasks. They have no notion of priority,
they are just run as soon as possible, and will probably be used for I/O
later.
For the moment they're used to replace the temporary thread-local list
that was used in the scheduler. The first part of the struct is common
with tasks so that tasks can be cast to tasklets and queued in this list.
Once a task is in the tasklet list, it has its leaf_p set to 0x1 so that
it cannot accidently be confused as not in the queue.
Pure tasklets are identifiable by their nice value of -32768 (which is
normally not possible).
A lot of tasks are run on one thread only, so instead of having them all
in the global runqueue, create a per-thread runqueue which doesn't require
any locking, and add all tasks belonging to only one thread to the
corresponding runqueue.
The global runqueue is still used for non-local tasks, and is visited
by each thread when checking its own runqueue. The nice parameter is
thus used both in the global runqueue and in the local ones. The rare
tasks that are bound to multiple threads will have their nice value
used twice (once for the global queue, once for the thread-local one).
In preparation for thread-specific runqueues, change the task API so that
the callback takes 3 arguments, the task itself, the context, and the state,
those were retrieved from the task before. This will allow these elements to
change atomically in the scheduler while the application uses the copied
value, and even to have NULL tasks later.
The polled_mask is only used in the pollers, and removing it from the
struct fdtab makes it fit in one 64B cacheline again, on a 64bits machine,
so make it a separate array.
With the old model, any fd shared by multiple threads, such as listeners
or dns sockets, would only be updated on one threads, so that could lead
to missed event, or spurious wakeups.
To avoid this, add a global list for fd that are shared, using the same
implementation as the fd cache, and only remove entries from this list
when every thread as updated its poller.
[wt: this will need to be backported to 1.8 but differently so this patch
must not be backported as-is]
Modify fd_add_to_fd_list() and fd_rm_from_fd_list() so that they take an
offset in the fdtab to the list entry, instead of hardcoding the fd cache,
so we can use them with other lists.
While running a task, we may try to delete and free a task that is about to
be run, because it's part of the local tasks list, or because rq_next points
to it.
So flag any task that is in the local tasks list to be deleted, instead of
run, by setting t->process to NULL, and re-make rq_next a global,
thread-local variable, that is modified if we attempt to delete that task.
Many thanks to PiBa-NL for reporting this and analysing the problem.
This should be backported to 1.8.
In order to use arbitrary data in the CLI (multiple lines or group of words
that must be considered as a whole, for example), it is now possible to add a
payload to the commands. To do so, the first line needs to end with a special
pattern: <<\n. Everything that follows will be left untouched by the CLI parser
and will be passed to the commands parsers.
Per-command support will need to be added to take advantage of this
feature.
Signed-off-by: Aurélien Nephtali <aurelien.nephtali@corp.ovh.com>
In some cases, we call cs_destroy() very early, so early the connection
doesn't yet have a mux, so we can't call mux->detach(). In this case,
just destroy the associated connection.
This should be backported to 1.8.
Now, the function parse_logsrv should be used to parse a "log" line. This
function will update the list of loggers passed in argument. It can release all
log servers when "no log" line was parsed (by the caller) or it can parse "log
global" or "log <address> ... " lines. It takes care of checking the caller
context (global or not) to prohibit "log global" usage in the global section.
Clearing the update_mask bit in fd_insert may lead to duplicate insertion
of fd in fd_updt, that could lead to a write past the end of the array.
Instead, make sure the update_mask bit is cleared by the pollers no matter
what.
This should be backported to 1.8.
[wt: warning: 1.8 doesn't have the lockless fdcache changes and will
require some careful changes in the pollers]
Commit 4815c8c ("MAJOR: fd/threads: Make the fdcache mostly lockless.")
made the fd cache lockless, but after a few iterations, a subtle part was
lost, consisting in setting the bit on the fd_cache_mask immediately when
adding an event. Now it was done only when the cache started to process
events, but the problem it causes is that fd_cache_mask isn't reliable
anymore as an indicator of presence of events to be processed with no
delay outside of fd_process_cached_events(). This results in some spurious
delays when processing inter-thread wakeups between tasks. Just restoring
the flag when the event is added is enough to fix the problem.
Kudos to Christopher for spotting this one!
No backport is needed as this is only in the development version.
The management of the servers and the proxies queues was not thread-safe at
all. First, the accesses to <strm>->pend_pos were not protected. So it was
possible to release it on a thread (for instance because the stream is released)
and to use it in same time on another one (because we redispatch pending
connections for a server). Then, the accesses to stream's information (flags and
target) from anywhere is forbidden. To be safe, The stream's state must always
be updated in the context of process_stream.
So to fix these issues, the queue module has been refactored. A lock has been
added in the pendconn structure. And now, when we try to dequeue a pending
connection, we start by unlinking it from the server/proxy queue and we wake up
the stream. Then, it is the stream reponsibility to really dequeue it (or
release it). This way, we are sure that only the stream can create and release
its <pend_pos> field.
However, be careful. This new implementation should be thread-safe
(hopefully...). But it is not optimal and in some situations, it could be really
slower in multi-threaded mode than in single-threaded one. The problem is that,
when we try to dequeue pending connections, we process it from the older one to
the newer one independently to the thread's affinity. So we need to wait the
other threads' wakeup to really process them. If threads are blocked in the
poller, this will add a significant latency. This problem happens when maxconn
values are very low.
This patch must be backported in 1.8.
When a listener is temporarily disabled, we start by locking it and then we call
.pause callback of the underlying protocol (tcp/unix). For TCP listeners, this
is not a problem. But listeners bound on an unix socket are in fact closed
instead. So .pause callback relies on unbind_listener function to do its job.
Unfortunatly, unbind_listener hold the listener's lock and then call an internal
function to unbind it. So, there is a deadlock here. This happens during a
reload. To fix the problemn, the function do_unbind_listener, which is lockless,
is now exported and is called when a listener bound on an unix socket is
temporarily disabled.
This patch must be backported in 1.8.
ssl_sock_get_pkey_algo can be used to report pkey algorithm to log
and ppv2 (RSA2048, EC256,...).
Extract pkey information is not free in ssl api (lock/alloc/free):
haproxy can use the pkey information computed in load_certificate.
Store and use this information in a SSL ex_data when available,
compute it if not (SSL multicert bundled and generated cert).
A TLS ticket keys file can be updated on the CLI and used in same time. So we
need to protect it to be sure all accesses are thread-safe. Because updates are
infrequent, a R/W lock has been used.
This patch must be backported in 1.8
