Explicitly call ssl_initialize_random to initialize the random generator
in init() global function. If the initialization fails, the startup is
interrupted.
This commit is in preparation for support of ssl on dynamic servers. To
be able to activate ssl on dynamic servers, it is necessary to ensure
that the random generator is initialized on startup regardless of the
config. It cannot be called at runtime as access to /dev/urandom is
required.
This also has the effect to fix the previous non-consistent behavior.
Indeed, if bind or server in the config are using ssl, the
initialization function was called, and if it failed, the startup was
interrupted. Otherwise, the ssl initialization code could have been
called through the ssl server for lua, but this times without blocking
the startup on error. Or not called at all if lua was deactivated.
The global shctx lookups and misses was updated without using atomic
ops, so the stats available in "show info" are very likely off by a few
units over time. This should be backported as far as 1.8. Versions
without _HA_ATOMIC_INC() can use HA_ATOMIC_ADD(,1).
The ifdefs surrounding the "show ssl ocsp-response" functionality that
were supposed to disable the code with BoringSSL were built the wrong
way.
It does not need to be backported.
This patch adds the "show ssl ocsp-response [<id>]" CLI command. This
command can be used to display the IDs of the OCSP tree entries along
with details about the entries' certificate ID (issuer's name and key
hash + serial number), or to display the details of a single
ocsp-response if an ID is given. The details displayed in this latter
case are the ones shown by a "openssl ocsp -respin <ocsp-response>
-text" call.
The OCSP tree entry key is a serialized version of the OCSP_CERTID of
the entry which is stored in a buffer that can be at most 128 bytes.
Depending on the length of the serial number, the actual non-zero part
of the key can be smaller than 128 bytes and this new structure member
allows to know how many of the bytes are filled. It will be useful when
dumping the key (in a "show ssl cert <cert>" output for instance).
The wey the "Next Update" field of the OCSP response is converted into a
timestamp relies on the use of signed integers for the year and month so
if the calculated timestamp happens to overflow INT_MAX, it ends up
being seen as negative and the OCSP response being dwignored in
ssl_sock_ocsp_stapling_cbk (because of the "ocsp->expire < now.tv_sec"
test).
It could be backported to all stable branches.
Since commit 04a5a44 ("BUILD: ssl: use HAVE_OPENSSL_KEYLOG instead of
OpenSSL versions") the "tune.ssl.keylog" feature is broken because
HAVE_OPENSSL_KEYLOG does not exist.
Replace this by a HAVE_SSL_KEYLOG which is defined in openssl-compat.h.
Also add an error when not built with the right openssl version.
Must be backported as far as 2.3.
Initialize the parsing context when checking server config validity.
Adjust the log messages to remove redundant config file/line and server
name. Do a similar cleaning in prepare_srv from ssl_sock as this
function is called at the same stage.
This will standardize the stderr output on startup with the parse_server
function.
Set "config :" as a prefix for the user messages context before starting
the configuration parsing. All following stderr output will be prefixed
by it.
As a consequence, remove extraneous prefix "config" already specified in
various ha_alert/warning/notice calls.
Some changes in the OpenSSL syntax API broke this syntax:
#if SSL_OP_NO_TLSv1_3
OpenSSL made this change which broke our usage in commit f04bb0bce490de847ed0482b8ec9eabedd173852:
-# define SSL_OP_NO_TLSv1_3 (uint64_t)0x20000000
+#define SSL_OP_BIT(n) ((uint64_t)1 << (uint64_t)n)
+# define SSL_OP_NO_TLSv1_3 SSL_OP_BIT(29)
Which can't be evaluated by the preprocessor anymore.
This patch replace the test by an openssl version test.
This fix part of #1276 issue.
A memory allocation failure happening during ssl_init_single_engine
would have resulted in a crash. This function is only called during
init.
It was raised in GitHub issue #1233.
It could be backported to all stable branches.
The CA/CRL hot update patches did not compile on some targets of the CI
(mainly gcc + ssl). This patch should fix almost all of them. It adds
missing variable initializations and return value checks to the
BIO_reset calls in show_crl_detail.
In order for the link between the cafile_entry and the default ckch
instance to be built, we need to give a pointer to the instance during
the ssl_sock_prepare_ctx call.
Each ca-file entry of the tree will now hold a list of the ckch
instances that use it so that we can iterate over them when updating the
ca-file via a cli command. Since the link between the SSL contexts and
the CA file tree entries is only built during the ssl_sock_prepare_ctx
function, which are called after all the ckch instances are created, we
need to add a little post processing after each ssl_sock_prepare_ctx
that builds the link between the corresponding ckch instance and CA file
tree entries.
In order to manage the ca-file and ca-verify-file options, any ckch
instance can be linked to multiple CA file tree entries and any CA file
entry can link multiple ckch instances. This is done thanks to a
dedicated list of ckch_inst references stored in the CA file tree
entries over which we can iterate (during an update for instance). We
avoid having one of those instances go stale by keeping a list of
references to those references in the instances.
When deleting a ckch_inst, we can then remove all the ckch_inst_link
instances that reference it, and when deleting a cafile_entry, we
iterate over the list of ckch_inst reference and clear the corresponding
entry in their own list of ckch_inst_link references.
This patch moves all the ssl_store related code to ssl_ckch.c since it
will mostly be used there once the CA file update CLI commands are all
implemented. It also makes the cafile_entry structure visible as well as
the cafile_tree.
This function is one of the few high-profile, unresolved ones in the memory
profile output, let's have it resolve to ease matching of SSL allocations,
which are not easy to follow.
There were 102 CLI commands whose help were zig-zagging all along the dump
making them unreadable. This patch realigns all these messages so that the
command now uses up to 40 characters before the delimiting colon. About a
third of the commands did not correctly list their arguments which were
added after the first version, so they were all updated. Some abuses of
the term "id" were fixed to use a more explanatory term. The
"set ssl ocsp-response" command was not listed because it lacked a help
message, this was fixed as well. The deprecated enable/disable commands
for agent/health/server were prominently written as deprecated. Whenever
possible, clearer explanations were provided.
The current "ADD" vs "ADDQ" is confusing because when thinking in terms
of appending at the end of a list, "ADD" naturally comes to mind, but
here it does the opposite, it inserts. Several times already it's been
incorrectly used where ADDQ was expected, the latest of which was a
fortunate accident explained in 6fa922562 ("CLEANUP: stream: explain
why we queue the stream at the head of the server list").
Let's use more explicit (but slightly longer) names now:
LIST_ADD -> LIST_INSERT
LIST_ADDQ -> LIST_APPEND
LIST_ADDED -> LIST_INLIST
LIST_DEL -> LIST_DELETE
The same is true for MT_LISTs, including their "TRY" variant.
LIST_DEL_INIT keeps its short name to encourage to use it instead of the
lazier LIST_DELETE which is often less safe.
The change is large (~674 non-comment entries) but is mechanical enough
to remain safe. No permutation was performed, so any out-of-tree code
can easily map older names to new ones.
The list doc was updated.
This patch replaces roughly all occurrences of an HA_ATOMIC_ADD(&foo, 1)
or HA_ATOMIC_SUB(&foo, 1) with the equivalent HA_ATOMIC_INC(&foo) and
HA_ATOMIC_DEC(&foo) respectively. These are 507 changes over 45 files.
Currently our atomic ops return a value but it's never known whether
the fetch is done before or after the operation, which causes some
confusion each time the value is desired. Let's create an explicit
variant of these operations suffixed with _FETCH to explicitly mention
that the fetch occurs after the operation, and make use of it at the
few call places.
The default SSL_CTX used by a specific frontend is the one of the first
ckch instance created for this frontend. If this instance has SNIs, then
the SSL context is linked to the instance through the list of SNIs
contained in it. If the instance does not have any SNIs though, then the
SSL_CTX is only referenced by the bind_conf structure and the instance
itself has no link to it.
When trying to update a certificate used by the default instance through
a cli command, a new version of the default instance was rebuilt but the
default SSL context referenced in the bind_conf structure would not be
changed, resulting in a buggy behavior in which depending on the SNI
used by the client, he could either use the new version of the updated
certificate or the original one.
This patch adds a reference to the default SSL context in the default
ckch instances so that it can be hot swapped during a certificate
update.
This should fix GitHub issue #1143.
It can be backported as far as 2.2.
If an unknown CA file was first mentioned in an "add ssl crt-list" CLI
command, it would result in a call to X509_STORE_load_locations which
performs a disk access which is forbidden during runtime. The same would
happen if a "ca-verify-file" or "crl-file" was specified. This was due
to the fact that the crt-list file parsing and the crt-list related CLI
commands parsing use the same functions.
The patch simply adds a new parameter to all the ssl_bind parsing
functions so that they know if the call is made during init or by the
CLI, and the ssl_store_load_locations function can then reject any new
cafile_entry creation coming from a CLI call.
It can be backported as far as 2.2.
pool_alloc_dirty() is the version below pool_alloc() that never performs
the memory poisonning. It should only be called directly for very large
unstructured areas for which enabling memory poisonning would not bring
anything but could significantly hurt performance (e.g. buffers). Using
this function here will not provide any benefit and will hurt the ability
to debug.
It would be desirable to backport this, although it does not cause any
user-visible bug, it just complicates debugging.
Add a start() method to ssl_sock. It is responsible with initiating the
SSL handshake, currently by just scheduling the tasklet, instead of doing
it in the init() method, when all the XPRT may not have been initialized.
Introduce a new XPRT method, start(). The init() method will now only
initialize whatever is needed for the XPRT to run, but any action the XPRT
has to do before being ready, such as handshakes, will be done in the new
start() method. That way, we will be sure the full stack of xprt will be
initialized before attempting to do anything.
The init() call is also moved to conn_prepare(). There's no longer any reason
to wait for the ctrl to be ready, any action will be deferred until start(),
anyway. This means conn_xprt_init() is no longer needed.
When tasklets were derived from tasks, there was no immediate need for
the scheduler to know their status after execution, and in a spirit of
simplicity they just started to always return NULL. The problem is that
it simply prevents the scheduler from 1) accounting their execution time,
and 2) keeping track of their current execution status. Indeed, a remote
wake-up could very well end up manipulating a tasklet that's currently
being executed. And this is the reason why those handlers have to take
the idle lock before checking their context.
In 2.5 we'll take care of making tasklets and tasks work more similarly,
but trouble is to be expected if we continue to propagate the trend of
returning NULL everywhere, especially if some fixes relying on a stricter
model later need to be backported. For this reason this patch updates all
known tasklet handlers to make them return NULL only when the tasklet was
freed. It has no effect for now and isn't even guaranteed to always be
100% safe but it puts the code into the right direction for this.
Emeric found that SSL+keepalive traffic had dropped quite a bit in the
recent changes, which could be bisected to recent commit 9205ab31d
("MINOR: ssl: mark the SSL handshake tasklet as heavy"). Indeed, a
first incarnation of this commit made use of the TASK_SELF_WAKING
flag but the last version directly used TASK_HEAVY, but it would still
continue to remove the already absent TASK_SELF_WAKING one instead of
TASK_HEAVY. As such, the SSL traffic remained processed with low
granularity.
No backport is needed as this is only 2.4.
There are multiple per-thread lists in the listeners, which isn't the
most efficient in terms of cache, and doesn't easily allow to store all
the per-thread stuff.
Now we introduce an srv_per_thread structure which the servers will have an
array of, and place the idle/safe/avail conns tree heads into. Overall this
was a fairly mechanical change, and the array is now always initialized for
all servers since we'll put more stuff there. It's worth noting that the Lua
code still has to deal with its own deinit by itself despite being in a
global list, because its server is not dynamically allocated.
Currently the SSL layer checks the validity of its tasklet's context just
in case it would have been stolen, had the connection been idle. Now it
will be able to be notified by the mux when this situation happens so as
not to have to grab the idle connection lock on each pass. This reuses the
TASK_F_USR1 flag just as the muxes do.
It's been too short for quite a while now and is now full. It's still
time to extend it to 32-bits since we have room for this without
wasting any space, so we now gained 16 new bits for future flags.
The values were not reassigned just in case there would be a few
hidden u16 or short somewhere in which these flags are placed (as
it used to be the case with stream->pending_events).
The patch is tagged MEDIUM because this required to update the task's
process() prototype to use an int instead of a short, that's quite a
bunch of places.
Errors reported by ssl_sock_dump_errors() to stderr would only report the
16 lower bits of the file descriptor because it used to be casted to ushort.
This can be backported to all versions but has really no importance in
practice since this is never seen.
There was a free(ptr) followed by ptr=malloc(ptr, len), which is the
equivalent of ptr = realloc(ptr, len) but slower and less clean. Let's
replace this.
In ssl_sock_free_srv_ctx() there are some calls to free() which are not
followed by a zeroing of the pointers. For now this function is only used
during deinit but it could be used at run time in the near future, so
better secure this.
This makes the code more readable and less prone to copy-paste errors.
In addition, it allows to place some __builtin_constant_p() predicates
to trigger a link-time error in case the compiler knows that the freed
area is constant. It will also produce compile-time error if trying to
free something that is not a regular pointer (e.g. a function).
The DEBUG_MEM_STATS macro now also defines an instance for ha_free()
so that all these calls can be checked.
178 occurrences were converted. The vast majority of them were handled
by the following Coccinelle script, some slightly refined to better deal
with "&*x" or with long lines:
@ rule @
expression E;
@@
- free(E);
- E = NULL;
+ ha_free(&E);
It was verified that the resulting code is the same, more or less a
handful of cases where the compiler optimized slightly differently
the temporary variable that holds the copy of the pointer.
A non-negligible amount of {free(str);str=NULL;str_len=0;} are still
present in the config part (mostly header names in proxies). These
ones should also be cleaned for the same reasons, and probably be
turned into ist strings.
There's a fairness issue between SSL and clear text. A full end-to-end
cleartext connection can require up to ~7.7 wakeups on average, plus 3.3
for the SSL tasklet, one of which is particularly expensive. So if we
accept to process many handshakes taking 1ms each, we significantly
increase the processing time of regular tasks just by adding an extra
delay between their calls. Ideally in order to be fair we should have a
1:18 call ratio, but this requires a bit more accounting. With very little
effort we can mark the SSL handshake tasklet as TASK_HEAVY until the
handshake completes, and remove it once done.
Doing so reduces from 14 to 3.0 ms the total response time experienced
by HTTP clients running in parallel to 1000 SSL clients doing full
handshakes in loops. Better, when tune.sched.low-latency is set to "on",
the latency further drops to 1.8 ms.
The tasks latency distribution explain pretty well what is happening:
Without the patch:
$ socat - /tmp/sock1 <<< "show profiling"
Per-task CPU profiling : on # set profiling tasks {on|auto|off}
Tasks activity:
function calls cpu_tot cpu_avg lat_tot lat_avg
ssl_sock_io_cb 2785375 19.35m 416.9us 5.401h 6.980ms
h1_io_cb 1868949 9.853s 5.271us 4.829h 9.302ms
process_stream 1864066 7.582s 4.067us 2.058h 3.974ms
si_cs_io_cb 1733808 1.932s 1.114us 26.83m 928.5us
h1_timeout_task 935760 - - 1.033h 3.975ms
accept_queue_process 303606 4.627s 15.24us 16.65m 3.291ms
srv_cleanup_toremove_connections452 64.31ms 142.3us 2.447s 5.415ms
task_run_applet 47 5.149ms 109.6us 57.09ms 1.215ms
srv_cleanup_idle_connections 34 2.210ms 65.00us 87.49ms 2.573ms
With the patch:
$ socat - /tmp/sock1 <<< "show profiling"
Per-task CPU profiling : on # set profiling tasks {on|auto|off}
Tasks activity:
function calls cpu_tot cpu_avg lat_tot lat_avg
ssl_sock_io_cb 3000365 21.08m 421.6us 20.30h 24.36ms
h1_io_cb 2031932 9.278s 4.565us 46.70m 1.379ms
process_stream 2010682 7.391s 3.675us 22.83m 681.2us
si_cs_io_cb 1702070 1.571s 922.0ns 8.732m 307.8us
h1_timeout_task 1009594 - - 17.63m 1.048ms
accept_queue_process 339595 4.792s 14.11us 3.714m 656.2us
srv_cleanup_toremove_connections779 75.42ms 96.81us 438.3ms 562.6us
srv_cleanup_idle_connections 48 2.498ms 52.05us 178.1us 3.709us
task_run_applet 17 1.738ms 102.3us 11.29ms 663.9us
other 1 947.8us 947.8us 202.6us 202.6us
=> h1_io_cb() and process_stream() are divided by 6 while ssl_sock_io_cb() is
multipled by 4
And with low-latency on:
$ socat - /tmp/sock1 <<< "show profiling"
Per-task CPU profiling : on # set profiling tasks {on|auto|off}
Tasks activity:
function calls cpu_tot cpu_avg lat_tot lat_avg
ssl_sock_io_cb 3000565 20.96m 419.1us 20.74h 24.89ms
h1_io_cb 2019702 9.294s 4.601us 49.22m 1.462ms
process_stream 2009755 6.570s 3.269us 1.493m 44.57us
si_cs_io_cb 1997820 1.566s 783.0ns 2.985m 89.66us
h1_timeout_task 1009742 - - 1.647m 97.86us
accept_queue_process 494509 4.697s 9.498us 1.240m 150.4us
srv_cleanup_toremove_connections1120 92.32ms 82.43us 463.0ms 413.4us
srv_cleanup_idle_connections 70 2.703ms 38.61us 204.5us 2.921us
task_run_applet 13 1.303ms 100.3us 85.12us 6.548us
=> process_stream() is divided by 100 while ssl_sock_io_cb() is
multipled by 4
Interestingly, the total HTTPS response time doesn't increase and even very
slightly decreases, with an overall ~1% higher request rate. The net effect
here is a redistribution of the CPU resources between internal tasks, and
in the case of SSL, handshakes wait bit more but everything after completes
faster.
This was made simple enough to be backportable if it helps some users
suffering from high latencies in mixed traffic.
Remove ebmb_node entry from struct connection and create a dedicated
struct conn_hash_node. struct connection contains now only a pointer to
a conn_hash_node, allocated only for connections where target is of type
OBJ_TYPE_SERVER. This will reduce memory footprints for every
connections that does not need http-reuse such as frontend connections.
The server idle/safe/available connection lists are replaced with ebmb-
trees. This is used to store backend connections, with the new field
connection hash as the key. The hash is a 8-bytes size field, used to
reflect specific connection parameters.
This is a preliminary work to be able to reuse connection with SNI,
explicit src/dst address or PROXY protocol.
This is a preparation work for connection reuse with sni/proxy
protocol/specific src-dst addresses.
Protect every access to idle conn lists with a lock. This is currently
strictly not needed because the access to the list are made with atomic
operations. However, to be able to reuse connection with specific
parameters, the list storage will be converted to eb-trees. As this
structure does not have atomic operation, it is mandatory to protect it
with a lock.
For this, the takeover lock is reused. Its role was to protect during
connection takeover. As it is now extended to general idle conns usage,
it is renamed to idle_conns_lock. A new lock section is also
instantiated named IDLE_CONNS_LOCK to isolate its impact on performance.
When adding the server side support for certificate update over the CLI
we encountered a design problem with the SSL session cache which was not
locked.
Indeed, once a certificate is updated we need to flush the cache, but we
also need to ensure that the cache is not used during the update.
To prevent the use of the cache during an update, this patch introduce a
rwlock for the SSL server session cache.
In the SSL session part this patch only lock in read, even if it writes.
The reason behind this, is that in the session part, there is one cache
storage per thread so it is not a problem to write in the cache from
several threads. The problem is only when trying to write in the cache
from the CLI (which could be on any thread) when a session is trying to
access the cache. So there is a write lock in the CLI part to prevent
simultaneous access by a session and the CLI.
This patch also remove the thread_isolate attempt which is eating too
much CPU time and was not protecting from the use of a free ptr in the
session.
both SSL_CTX_set_msg_callback and SSL_CTRL_SET_MSG_CALLBACK defined since
ea262260469e49149cb10b25a87dfd6ad3fbb4ba, we can safely switch to that guard
instead of OpenSSL version
special guard macros HAVE_SSL_CTX_ADD_SERVER_CUSTOM_EXT was defined earlier
exactly for guarding SSL_CTX_add_server_custom_ext, let us use it wherever
appropriate
HAVE_SSL_CTX_ADD_SERVER_CUSTOM_EXT was introduced in ec60909871
however it was defined as HAVE_SL_CTX_ADD_SERVER_CUSTOM_EXT (missing "S")
let us fix typo
The CO_FL_EARLY_SSL_HS flag was inconditionally set on the connection,
resulting in SSL_read_early_data() always being used first in handshake
calculations. While this seems to work well (probably that there are
fallback paths inside openssl), it's particularly confusing and makes
the debugging quite complicated. It possibly is not optimal by the way.
This flag ought to be set only when early_data is configured on the bind
line. Apparently there used to be a good reason for doing it this way in
1.8 times, but it really does not make sense anymore. It may be OK to
backport this to 2.3 if this helps with troubleshooting, but better not
go too far as it's unlikely to fix any real issue while it could introduce
some in old versions.
As spotted in issue #822, we're having a problem with error detection in
the SSL layer. The problem is that on an overwhelmed machine, accepted
connections can start to pile up, each of them requiring a slow handshake,
and during all this time if the client aborts, the handshake will still be
calculated.
The error controls are properly placed, it's just that the SSL layer
reads records exactly of the advertised size, without having the ability
to encounter a pending connection error. As such if injecting many TLS
connections to a listener with a huge backlog, it's fairly possible to
meet this situation:
12:50:48.236056 accept4(8, {sa_family=AF_INET, sin_port=htons(62794), sin_addr=inet_addr("127.0.0.1")}, [128->16], SOCK_NONBLOCK) = 1109
12:50:48.236071 setsockopt(1109, SOL_TCP, TCP_NODELAY, [1], 4) = 0
(process other connections' handshakes)
12:50:48.257270 getsockopt(1109, SOL_SOCKET, SO_ERROR, [ECONNRESET], [4]) = 0
(proof that error was detectable there but this code was added for the PoC)
12:50:48.257297 recvfrom(1109, "\26\3\1\2\0", 5, 0, NULL, NULL) = 5
12:50:48.257310 recvfrom(1109, "\1\0\1\3"..., 512, 0, NULL, NULL) = 512
(handshake calculation taking 700us)
12:50:48.258004 sendto(1109, "\26\3\3\0z"..., 1421, MSG_DONTWAIT|MSG_NOSIGNAL, NULL, 0) = -1 EPIPE (Broken pipe)
12:50:48.258036 close(1109) = 0
The situation was amplified by the multi-queue accept code, as it resulted
in many incoming connections to be accepted long before they could be
handled. Prior to this they would have been accepted and the handshake
immediately started, which would have resulted in most of the connections
waiting in the the system's accept queue, and dying there when the client
aborted, thus the error would have been detected before even trying to
pass them to the handshake code.
As a result, with a listener running on a very large backlog, it's possible
to quickly accept tens of thousands of connections and waste time slowly
running their handshakes while they get replaced by other ones.
This patch adds an SO_ERROR check on the connection's FD before starting
the handshake. This is not pretty as it requires to access the FD, but it
does the job.
Some improvements should be made over the long term so that the transport
layers can report extra information with their ->rcv_buf() call, or at the
very least, implement a ->get_conn_status() function to report various
flags such as shutr, shutw, error at various stages, allowing an upper
layer to inquire for the relevance of engaging into a long operation if
it's known the connection is not usable anymore. An even simpler step
could probably consist in implementing this in the control layer.
This patch is simple enough to be backported as far as 2.0.
Many thanks to @ngaugler for his numerous tests with detailed feedback.
The new ckch_inst_new_load_srv_store() function which mimics the
ckch_inst_new_load_store() function includes some dead code which was
used only in the former function.
Fix issue #1081.
This patch makes things more consistent between the bind_conf functions
and the server ones:
- ssl_sock_load_srv_ckchs() loads the SSL_CTX in the server
(ssl_sock_load_ckchs() load the SNIs in the bind_conf)
- add the server parameter to ssl_sock_load_srv_ckchs()
- changes made to the ckch_inst are done in
ckch_inst_new_load_srv_store()
Since the server SSL_CTX is now stored in the ckch_inst, it is not
needed anymore to pass an SSL_CTX to ckch_inst_new_load_srv_store() and
ssl_sock_load_srv_ckchs().
When trying to update a backend certificate, we should find a
server-side ckch instance thanks to which we can rebuild a new ssl
context and a new ckch instance that replace the previous ones in the
server structure. This way any new ssl session will be built out of the
new ssl context and the newly updated certificate.
This resolves a subpart of GitHub issue #427 (the certificate part)
In order for the backend server's certificate to be hot-updatable, it
needs to fit into the implementation used for the "bind" certificates.
This patch follows the architecture implemented for the frontend
implementation and reuses its structures and general function calls
(adapted for the server side).
The ckch store logic is kept and a dedicated ckch instance is used (one
per server). The whole sni_ctx logic was not kept though because it is
not needed.
All the new functions added in this patch are basically server-side
copies of functions that already exist on the frontend side with all the
sni and bind_cond references removed.
The ckch_inst structure has a new 'is_server_instance' flag which is
used to distinguish regular instances from the server-side ones, and a
new pointer to the server's structure in case of backend instance.
Since the new server ckch instances are linked to a standard ckch_store,
a lookup in the ckch store table will succeed so the cli code used to
update bind certificates needs to be covered to manage those new server
side ckch instances.
Split the server's ssl context initialization into the general ssl
related initializations and the actual initialization of a single
SSL_CTX structure. This way the context's initialization will be
usable by itself from elsewhere.
If a subscriber's tasklet was called more than one million times, if
the ssl_ctx's connection doesn't match the current one, or if the
connection appears closed in one direction while the SSL stack is
still subscribed, the FD is reported as suspicious. The close cases
may occasionally trigger a false positive during very short and rare
windows. Similarly the 1M calls will trigger after 16GB are transferred
over a given connection. These are rare enough events to be reported as
suspicious.
Now the show_fd helpers at the transport and mux levels return an integer
which indicates whether or not the inspected entry looks suspicious. When
an entry is reported as suspicious, "show fd" will suffix it with an
exclamation mark ('!') in the dump, that is supposed to help detecting
them.
For now, helpers were adjusted to adapt to the new API but none of them
reports any suspicious entry yet.
In FD dumps it's often very important to figure what upper layer function
is going to be called. Let's export the few I/O callbacks that appear as
tasklet functions so that "show fd" can resolve them instead of printing
a pointer relative to main. For example:
1028 : st=0x21(R:rA W:Ra) ev=0x01(heopI) [lc] tmask=0x2 umask=0x2 owner=0x7f00b889b200 iocb=0x65b638(sock_conn_iocb) back=0 cflg=0x00001300 fe=recv mux=H2 ctx=0x7f00c8824de0 h2c.st0=FRH .err=0 .maxid=795 .lastid=-1 .flg=0x0000 .nbst=0 .nbcs=0 .fctl_cnt=0 .send_cnt=0 .tree_cnt=0 .orph_cnt=0 .sub=1 .dsi=795 .dbuf=0@(nil)+0/0 .msi=-1 .mbuf=[1..1|32],h=[0@(nil)+0/0],t=[0@(nil)+0/0] xprt=SSL xprt_ctx=0x7f00c86d0750 xctx.st=0 .xprt=RAW .wait.ev=1 .subs=0x7f00c88252e0(ev=1 tl=0x7f00a07d1aa0 tl.calls=1047 tl.ctx=0x7f00c8824de0 tl.fct=h2_io_cb) .sent_early=0 .early_in=0
The SSL context contains a lot of important details that are currently
missing from debug outputs. Now that we detect ssl_sock, we can perform
some sanity checks, print the next xprt, the subscriber callback's context,
handler and number of calls. The process function is also resolved. This
now gives for example on an H2 connection:
1029 : st=0x21(R:rA W:Ra) ev=0x01(heopI) [lc] tmask=0x2 umask=0x2 owner=0x7fc714881700 iocb=0x65b528(sock_conn_iocb) back=0 cflg=0x00001300 fe=recv mux=H2 ctx=0x7fc734545e50 h2c.st0=FRH .err=0 .maxid=217 .lastid=-1 .flg=0x0000 .nbst=0 .nbcs=0 .fctl_cnt=0 .send_cnt=0 .tree_cnt=0 .orph_cnt=0 .sub=1 .dsi=217 .dbuf=0@(nil)+0/0 .msi=-1 .mbuf=[1..1|32],h=[0@(nil)+0/0],t=[0@(nil)+0/0] xprt=SSL xprt_ctx=0x7fc73478f230 xctx.st=0 .xprt=RAW .wait.ev=1 .subs=0x7fc734546350(ev=1 tl=0x7fc7346702e0 tl.calls=278 tl.ctx=0x7fc734545e50 tl.fct=main-0x144efa) .sent_early=0 .early_in=0
As reported in issue #1010, gcc-11 as of 2021-01-05 is overzealous in
its -Warray-bounds check as it considers that a cast of a global struct
accesses the entire struct even if only one specific element is accessed.
This instantly breaks all lists making use of container_of() to build
their iterators as soon as the starting point is known if the next
element is retrieved from the list head in a way that is visible to the
compiler's optimizer, because it decides that accessing the list's next
element dereferences the list as a larger struct (which it does not).
The temporary workaround consisted in disabling -Warray-bounds, but this
warning is traditionally quite effective at spotting real bugs, and we
actually have is a single occurrence of this issue in the whole code.
By changing the tlskeys_list_get_next() function to take a list element
as the starting point instead of the current element, we can avoid
the starting point issue but this requires to change all call places
to write hideous casts made of &((struct blah*)ref)->list. At the
moment we only have two such call places, the first one being used to
initialize the list (which is the one causing the warning) and which
is thus easy to simplify, and the second one for which we already have
an aliased pointer to the reference that is still valid at the call
place, and given the original pointer also remained unchanged, we can
safely use this alias, and this is safer than leaving a cast there.
Let's make this change now while it's still easy.
The generated code only changed in function cli_io_handler_tlskeys_files()
due to register allocation and the change of variable scope between the
old one and the new one.
`getnext` was only used to fill `ref` at the beginning of the function. Both
have the same type. Replace the parameter name by `ref` to remove the useless
local variable.
Makes TLS/TCP and QUIC share the same CTX initializer so that not to modify the
caller which is an XPRT callback used both by the QUIC xprt and the SSL xprt over
TCP.
QUIC needs to initialize its BIO and SSL session the same way as for SSL over TCP
connections. It needs also to use the same ClientHello callback.
This patch only exports functions and variables shared between QUIC and SSL/TCP
connections.
This patch extraces the code which initializes the BIO and SSL session
objects so that to reuse it elsewhere later for QUIC conections which
only needs SSL and BIO objects at th TLS layer stack level to work.
SSL_CTX_get0_privatekey is openssl/boringssl specific function present
since openssl-1.0.2, let us define readable guard for it, not depending
on HA_OPENSSL_VERSION
SSL_CTX_add_server_custom_ext is openssl specific function present
since openssl-1.0.2, let us define readable guard for it, not depending
on HA_OPENSSL_VERSION
Now we don't touch the fd anymore there, instead we rely on the ->drain()
provided by the control layer. As such the function was renamed to
conn_ctrl_drain().
Since HAProxy 2.3, OpenSSL 1.1.1 is a requirement for using a
multi-certificate bundle in the configuration. This patch emits a fatal
error when HAProxy tries to load a bundle with an older version of
HAProxy.
This problem was encountered by an user in issue #990.
This must be backported in 2.3.
HAVE_SSL_CTX_SET_CIPHERSUITES is newly defined macro set in openssl-compat.h,
which helps to identify ssl libs (currently OpenSSL-1.1.1 only) that supports
TLS13 cipersuites manipulation on TLS13 context
When a non-existing file was specified in the configuration, haproxy
does not exits with an error which is not normal.
This bug was introduced by dfa93be ("MEDIUM: ssl: emulate multi-cert
bundles loading in standard loading") which does nothing if the stat
failed.
This patch introduce a "found" variable which is checked at the end of
the function so we exit with an error if no find were found.
Must be backported to 2.3.
In bug #959 it was reported that haproxy segfault on startup when trying
to load a certifcate which use the X509v3 AKID extension but without the
keyid field.
This field is not mandatory and could be replaced by the serial or the
DirName.
For example:
X509v3 extensions:
X509v3 Basic Constraints:
CA:FALSE
X509v3 Subject Key Identifier:
42:7D:5F:6C:3E:0D:B7:2C:FD:6A:8A:32:C6:C6:B9:90:05:D1:B2:9B
X509v3 Authority Key Identifier:
DirName:/O=HAProxy Technologies/CN=HAProxy Test Intermediate CA
serial:F2:AB:C1:41:9F:AB:45:8E:86:23:AD:C5:54:ED:DF:FA
This bug was introduced by 70df7b ("MINOR: ssl: add "issuers-chain-path" directive").
This patch must be backported as far as 2.2.
in the context of a progressive backend migration, we want to be able to
activate SSL on outgoing connections to the server at runtime without
reloading.
This patch adds a `set server ssl` command; in order to allow that:
- add `srv_use_ssl` to `show servers state` command for compatibility,
also update associated parsing
- when using default-server ssl setting, and `no-ssl` on server line,
init SSL ctx without activating it
- when triggering ssl API, de/activate SSL connections as requested
- clean ongoing connections as it is done for addr/port changes, without
checking prior server state
example config:
backend be_foo
default-server ssl
server srv0 127.0.0.1:6011 weight 1 no-ssl
show servers state:
5 be_foo 1 srv0 127.0.0.1 2 0 1 1 15 1 0 4 0 0 0 0 - 6011 - -1
where srv0 can switch to ssl later during the runtime:
set server be_foo/srv0 ssl on
5 be_foo 1 srv0 127.0.0.1 2 0 1 1 15 1 0 4 0 0 0 0 - 6011 - 1
Also update existing tests and create a new one.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
Return ERR_NONE instead of 0 on success for all config callbacks that should
return ERR_* codes. There is no change because ERR_NONE is a macro equals to
0. But this makes the return value more explicit.
Since commit d0447a7c3 ("MINOR: ssl: add counters for ssl sessions"),
gcc 9+ complains about this:
CC src/ssl_sock.o
src/ssl_sock.c: In function 'ssl_sock_io_cb':
src/ssl_sock.c:5416:3: warning: 'counters_px' may be used uninitialized in this function [-Wmaybe-uninitialized]
5416 | ++counters_px->reused_sess;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
src/ssl_sock.c:5133:23: note: 'counters_px' was declared here
5133 | struct ssl_counters *counters, *counters_px;
| ^~~~~~~~~~~
Either a listener or a server are expected there, so ther counters are
always initialized and the compiler cannot know this. Let's preset
them and test before updating the counter, we're not in a hot path
here.
No backport is needed.
The default dh_param value is 2048 and it's preset to zero unless explicitly
set, so we must not report a warning about DH param not being loadble in 1024
bits when we're going to use 2048. Thanks to Dinko for reporting this.
This should be backported to 2.2.
Let us use SSL_CTX_set1_curves_list, defined by OpenSSL, as well as in
openssl-compat when SSL_CTRL_SET_CURVES_LIST is present (BoringSSL),
for feature detection instead of versions.
BorinSSL pretends to be 1.1.1 version of OpenSSL. It messes some
version based feature presense checks. For example, OpenSSL specific
early data support.
Let us change that feature detction to SSL_READ_EARLY_DATA_SUCCESS
macro check instead of version comparision.
It's a regression from b3201a3e "BUG/MINOR: disable dynamic OCSP load
with BoringSSL". The origin bug is link to 76b4a12 "BUG/MEDIUM: ssl:
memory leak of ocsp data at SSL_CTX_free()": ssl_sock_free_ocsp()
shoud be in #ifndef OPENSSL_IS_BORINGSSL.
To avoid long #ifdef for small code, the BoringSSL part for ocsp load
is isolated in a simple #ifdef.
This must be backported in 2.2 and 2.1
In issue #785, users are reporting that it's not convenient to load a
".crt.key" when the configuration contains a ".crt".
This option allows to remove the extension of the certificate before
trying to load any extra SSL file (.key, .ocsp, .sctl, .issuer etc.)
The patch changes a little bit the way ssl_sock_load_files_into_ckch()
looks for the file.
On deinit, when the server SSL ctx is released, we must take care to release the
cached SSL sessions stored in the array <ssl_ctx.reused_sess>. There are
global.nbthread entries in this array, each one may have a pointer on a cached
session.
This patch should fix the issue #802. No backport needed.
Remove the last utility functions for handling the multi-cert bundles
and remove the multi-variable from the ckch structure.
With this patch, the bundles are completely removed.
Since the removal of the multi-certificates bundle support, this
variable is not useful anymore, we can remove all tests for this
variable and suppose that every ckch contains a single certificate.
