This patch re-works configuration parsing, it removes the "server"
lines from "resolvers" sections introduced in commit 56fc5d9eb:
MEDIUM: resolvers: add supports of TCP nameservers in resolvers.
It also extends the nameserver lines to support stream server
addresses such as:
resolvers
nameserver localhost tcp@127.0.0.1:53
Doing so, a part of nameserver's init code was factorized in
function 'parse_resolvers' and removed from 'post_parse_resolvers'.
This patch replaces roughly all occurrences of an HA_ATOMIC_ADD(&foo, 1)
or HA_ATOMIC_SUB(&foo, 1) with the equivalent HA_ATOMIC_INC(&foo) and
HA_ATOMIC_DEC(&foo) respectively. These are 507 changes over 45 files.
The fetch_and_xxx variant is often missing for add/sub/and/or. In fact
it was only provided for ADD under the name XADD which corresponds to
the x86 instruction name. But for destructive operations like AND and
OR it's missing even more as it's not possible to know the value before
modifying it.
This patch explicitly adds HA_ATOMIC_FETCH_{OR,AND,ADD,SUB} which
cover these standard operations, and renames XADD to FETCH_ADD (there
were only 6 call places).
In the future, backport of fixes involving such operations could simply
remap FETCH_ADD(x) to XADD(x), FETCH_SUB(x) to XADD(-x), and for the
OR/AND if needed, these could possibly be done using BTS/BTR.
It's worth noting that xchg could have been renamed to fetch_and_store()
but xchg already has well understood semantics and it wasn't needed to
go further.
Currently our atomic ops return a value but it's never known whether
the fetch is done before or after the operation, which causes some
confusion each time the value is desired. Let's create an explicit
variant of these operations suffixed with _FETCH to explicitly mention
that the fetch occurs after the operation, and make use of it at the
few call places.
Slightly reorder the status flags to better match their order in the
"state" field, and also decode the "shut" state which is particularly
useful and already part of this field.
There is a function called fd_write_frag_line() that's essentially used
by loggers and that is used to write an atomic message line over a file
descriptor using writev(). However a lock is required around the writev()
call to prevent messages from multiple threads from being interleaved.
Till now a SPIN_TRYLOCK was used on a dedicated lock that was common to
all FDs. This is quite not pretty as if there are multiple output pipes
to collect logs, there will be quite some contention. Now that there
are empty flags left in the FD state and that we can finally use atomic
ops on them, let's add a flag to indicate the FD is locked for exclusive
access by a syscall. At least the locking will now be on an FD basis and
not the whole process, so we can remove the log_lock.
No need to keep this flag apart any more, let's merge it into the global
state. The bit was not cleared in fd_insert() because the only user is
the function used to create and atomically send a log message to a pipe
FD, which never registers the fd. Here we clear it nevertheless for the
sake of clarity.
Note that with an extra cleaning pass we could have a bit number
here and simply use a BTS to test and set it.
No need to keep this flag apart any more, let's merge it into the global
state. The CLI's output state was extended to 6 digits and the linger/cloned
flags moved inside the parenthesis.
For a long time we've had fdtab[].ev and fdtab[].state which contain two
arbitrary sets of information, one is mostly the configuration plus some
shutdown reports and the other one is the latest polling status report
which also contains some sticky error and shutdown reports.
These ones used to be stored into distinct chars, complicating certain
operations and not even allowing to clearly see concurrent accesses (e.g.
fd_delete_orphan() would set the state to zero while fd_insert() would
only set the event to zero).
This patch creates a single uint with the two sets in it, still delimited
at the byte level for better readability. The original FD_EV_* values
remained at the lowest bit levels as they are also known by their bit
value. The next step will consist in merging the remaining bits into it.
The whole bits are now cleared both in fd_insert() and _fd_delete_orphan()
because after a complete check, it is certain that in both cases these
functions are the only ones touching these areas. Indeed, for
_fd_delete_orphan(), the thread_mask has already been zeroed before a
poller can call fd_update_event() which would touch the state, so it
is certain that _fd_delete_orphan() is alone. Regarding fd_insert(),
only one thread will get an FD at any moment, and it as this FD has
already been released by _fd_delete_orphan() by definition it is certain
that previous users have definitely stopped touching it.
Strictly speaking there's no need for clearing the state again in
fd_insert() but it's cheap and will remove some doubts during some
troubleshooting sessions.
In preparation of merging FD_POLL* and FD_EV*, this only changes the
value of FD_POLL_* to use bits 8-15 (the second byte). The size of the
field has been temporarily extended to 32 bits already, as well as
the temporary variables that carry the new composite value inside
fd_update_events(). The resulting fdtab entry becomes temporarily
unaligned. All places making access to .ev or FD_POLL_* were carefully
inspected to make sure they were safe regarding this change. Only one
temporary update was needed for the "show fd" code. The code was only
slightly inflated at this step.
The regression was introduced by commit previous commit 94aab06:
MEDIUM: log: support tcp or stream addresses on log lines.
This previous patch tries to retrieve the used protocol parsing
the address using the str2sa_range function but forgets that
the raw file descriptor adresses don't specify a protocol
and str2sa_range probes an error.
This patch re-work the str2sa_range function to stop
probing error if an authorized RAW_FD address is parsed
whereas the caller request also a protocol.
It also modify the code of parse_logsrv to switch on stream
logservers only if a protocol was detected.
An explicit stream address prefix such as "tcp6@" "tcp4@"
"stream+ipv6@" "stream+ipv4@" or "stream+unix@" will
allocate an implicit ring buffer with a forward server
targeting the given address.
This is usefull to simply send logs to a log server in tcp
and It doesn't need to declare a ring section in configuration.
This patch registers the parsed file and the line where a log server
is declared to make those information available in configuration
post check.
Those new informations were added on error messages probed resolving
ring names on post configuration check.
Since the internal function str2sa_range is used to addresses
for different objects ('server', 'bind' but also 'log' or
'nameserver') we notice that some combinations are missing.
"ip@" is introduced to authorize the prefix "dgram+ip@" or
"stream+ip@" which dectects automatically IP version but
specify dgram or stream.
"tcp@" was introduced and is an alias for "stream+ip@".
"tcp6" and "tcp4" are now aliases for "stream+ipv6@" and
"stream+ipv4@".
"uxst@" and "uxdg@" are now aliases for "stream+unix@" and
"dgram+unix@".
This patch also adds a complete section in documentation to
describe adresses and their prefixes.
Commit c20ad0d8dbd1bb5707bbfe23632415c3062e046c (BUG/MINOR: tools: make
parse_time_err() more strict on the timer validity) broke parsing the "us"
unit in timers. It caused `parse_time_err()` to return the string "s",
which indicates an error.
Now if the "u" is followed by an "s" we properly continue processing the
time instead of immediately failing.
This fixes#1209. It must be backported to all stable versions.
When a script retrieves request data from an HTTP applet, line per line or
not, we must be sure to properly detect the end of the request by checking
HTX_FL_EOM flag when everything was consumed. Otherwise, the script may
hang.
It is pretty easy to reproduce the bug by calling applet:receive() without
specifying any length. If the request is not chunked, the function never
returns.
The bug was introduced when the EOM block was removed. Thus, it is specific
to the 2.4. This patch should fix the issue #1207. No backport needed.
HTTP_2.0 predefined macro returns true for HTTP/2 requests. HTTP/2 doen't
convey a version information, so this macro may seem a bit strange. But for
compatiblity reasons, internally, the "HTTP/2.0" version is set. Thus, it is
handy to rely on it to differenciate HTTP/1 and HTTP/2 requests.
Some predefined ACLs were still based on deprecated sample fetches, like
req_proto_http or req_ver. Now, they use non-deprecated sample fetches. In
addition, the usage lines in the configuration manual have been updated to
be more explicit.
Both the source file and the dummy library are now at the same place.
Maybe the build howto could be moved there as well to make things even
cleaner.
The Makefile, MAINTAINERS, doc, and vtest matrix were updated.
Both the source file and the dummy library are now at the same place.
Maybe the build howto could be moved there as well to make things even
cleaner.
The Makefile, MAINTAINERS, doc, github build matrix, coverity checks
and travis CI's build were updated.
Now it's much cleaner, both 51d.c and the dummy library live together and
are easier to spot and maintain. The build howto probably ought to be moved
there as well. Makefile, docs and MAINTAINERS were updated, as well as
the github CI's build matrix, travis CI's, and coverity checks.
The following directories were moved from contrib/ to dev/ to make their
use case a bit clearer. In short, only developers are expected to ever
go there. The makefile was updated to build and clean from these ones.
base64/ flags/ hpack/ plug_qdisc/ poll/ tcploop/ trace/
Add a diagnostic to check that two servers of the same backend does not
use the same cookie value. Ignore backup servers as it is quite common
for them to share a cookie value with a primary one.
Define MODE_DIAG which is used to run haproxy in diagnostic mode. This
mode is used to output extra warnings about possible configuration
blunder or sub-optimal usage. It can be activated with argument '-dD'.
A new output function ha_diag_warning is implemented reserved for
diagnostic output. It serves to standardize the format of diagnostic
messages.
A macro HA_DIAG_WARN_COND is also available to automatically check if
diagnostic mode is on before executing the diagnostic check.
In issue #1200 Coverity believes we may use an uninitialized field
smp.sess here while it's not possible because the returned variable
necessarily matches SCOPE_PROC hence smp.sess is not used. But it
cannot see this and it could be confusing if the code later evolved
into something more complex. That's not a critical path so let's
first reset the sample.
A bug was introduced when the legacy HTTP mode was removed. To capture the
HTTP version of the request or the response, we rely on the message state to
be sure the status line was received. However, the test is inverted. The
version can be captured if message headers were received, not the opposite.
This patch must be backported as far as 2.2.
Historically, an option was added to wait for the request payload (option
http-buffer-request). This option has 2 drawbacks. First, it is an ON/OFF
option for the whole proxy. It cannot be enabled on demand depending on the
message. Then, as its name suggests, it only works on the request side. The
only option to wait for the response payload was to write a dedicated
filter. While it is an acceptable solution for complex applications, it is a
bit overkill to simply match strings in the body.
To make everyone happy, this patch adds a dedicated HTTP action to wait for
the message payload, for the request or the response depending it is used in
an http-request or an http-response ruleset. The time to wait is
configurable and, optionally, the minimum payload size to have before stop
to wait.
Both the http action and the old http analyzer rely on the same internal
function.
L6 sample fetches are now ignored when called from an HTTP proxy. Thus, a
warning is emitted during the startup if such usage is detected. It is true
for most ACLs and for log-format strings. Unfortunately, it is a bit painful
to do so for sample expressions.
This patch relies on the commit "MINOR: action: Use a generic function to
check validity of an action rule list".
The check_action_rules() function is now used to check the validity of an
action rule list. It is used from check_config_validity() function to check
L5/6/7 rulesets.
It is not really a context-less sample fetch, but it is internal. And it
only fails if no stream is attached to the sample. This way, it is still
possible to use it on an HTTP proxy (L6 sample fetches are ignored now for
HTTP proxies).
If the commit "BUG/MINOR: payload/htx: Ingore L6 sample fetches for HTX
streams/checks" is backported, it may be a good idea to backport this one
too. But only as far as 2.2.
Use a L6 sample fetch on an HTX streams or a HTX health-check is meaningless
because data are not raw but structured. So now, these sample fetches fail
when called from an HTTP proxy. In addition, a warning has been added in the
configuration manual, at the begining of the L6 sample fetches section.
Note that req.len and res.len samples return the HTX data size instead of
failing. It is not accurate because it does not reflect the buffer size nor
the raw data length. But we keep it for backward compatibility purpose.
However it remains a bit strange to use it on an HTTP proxy.
This patch may be backported to all versions supporting the HTX, i.e as far
as 2.0. But the part about the health-checks is only valid for the 2.2 and
upper.
If a 'switch-mode http' tcp action is configured on a listener with no
backend, a warning is displayed to remember HTTP connections cannot be
routed to TCP servers. Indeed, backend connection is still established using
the proxy mode.
It is now possible to perform HTTP upgrades on a TCP stream from the
frontend side. To do so, a tcp-request content rule must be defined with the
switch-mode action, specifying the mode (for now, only http is supported)
and optionnaly the proto (h1 or h2).
This way it could be possible to set HTTP directives on a TCP frontend which
will only be evaluated if an upgrade is performed. This new way to perform
HTTP upgrades should replace progressively the old way, consisting to route
the request to an HTTP backend. And it should be also a good start to remove
all HTTP processing from tcp-request content rules.
This action is terminal, it stops the ruleset evaluation. It is only
available on proxy with the frontend capability.
The configuration manual has been updated accordingly.
The code responsible to perform an HTTP upgrade from a TCP stream is moved
in a dedicated function, stream_set_http_mode().
The stream_set_backend() function is slightly updated, especially to
correctly set the request analysers.
Now allocation and initialization of HTTP transactions are performed in a
unique function. Historically, there were two functions because the same TXN
was reset for K/A connections in the legacy HTTP mode. Now, in HTX, K/A
connections are handled at the mux level. A new stream, and thus a new TXN,
is created for each request. In addition, the function responsible to end
the TXN is now also reponsible to release it.
So, now, http_create_txn() and http_destroy_txn() must be used to create and
destroy an HTTP transaction.
It is just a small cleanup. AN_REQ_FLT_HTTP_HDRS and AN_RES_FLT_HTTP_HDRS
analysers are now set in HTTP analysers at the same place
AN_REQ_HTTP_XFER_BODY and AN_RES_HTTP_XFER_BODY are set.
We now use the stream instead of the proxy to know if we are processing HTTP
data or not. If the stream is an HTX stream, it means we are dealing with
HTTP data. It is more accurate than the proxy mode because when an HTTP
upgrade is performed, the proxy is not changed and only the stream may be
used.
Note that it was not a problem to rely on the proxy because HTTP upgrades
may only happen when an HTTP backend was set. But, we will add the support
of HTTP upgrades on the frontend side, after te tcp-request rules
evaluation. In this context, we cannot rely on the proxy mode.
Add "none" in the list of supported mux protocols. It relies on the
passthrough multiplexer and use almost the same mux_ops structure. Only the
flags differ because this "new" mux does not support the upgrades. "none"
was chosen to explicitly stated there is not processing at the mux level.
Thus it is now possible to set "proto none" or "check-proto none" on
bind/server lines, depending on the context. However, when set, no upgrade
to HTTP is performed. It may be a way to disable HTTP upgrades per bind
line.
Add "h1" in the list of supported mux protocols. It relies on the H1
multiplexer and use the almost the same mux_ops structure. Only the flags
differ because this "new" mux does not support the upgrades.
Thus it is now possible to set "proto h1" or "check-proto h1" on bind/server
lines, depending on the context. However, when set, no upgrade to HTTP/2 is
performed. It may be a way to disable implicit HTTP/2 upgrades per bind
line.
