All ACL fetches which return integer value now store the result into
the temporary pattern struct. All ACL matches which rely on integer
also get their value there.
Note: the pattern data types are not set right now.
This patch settles the 2 loggers limitation.
Loggers are now stored in linked lists.
Using "global log", the global loggers list content is added at the end
of the current proxy list. Each "log" entries are added at the end of
the proxy list.
"no log" flush a logger list.
For a long time, the max number of headers was taken as a part of the buffer
size. Since the header size can be configured at runtime, it does not make
much sense anymore.
Nothing was making it necessary to have a static value, so let's turn this into
a tunable with a default value of 101 which equals what was previously used.
It makes no sense to have one pointer to the hdr_idx pool in each proxy
struct since these pools do not depend on the proxy. Let's have a common
pool instead as it is already the case for other types.
Stream interfaces used to distinguish between client and server addresses
because they were previously of different types (sockaddr_storage for the
client, sockaddr_in for the server). This is not the case anymore, and this
distinction is confusing at best and has caused a number of regressions to
be introduced in the process of converting everything to full-ipv6. We can
now remove this and have a much cleaner code.
Many inet_ntop calls were partially right, which was hard to detect given
the complex combinations. Some of them were relying on the listener's proto
instead of the address itself, which could have been different when dealing
with an accept-proxy connection.
The new addr_to_str() function does the dirty job and returns the family, which
makes it particularly suited to calls from switch/case statements. A large number
of if/else statements were removed and the stats output could even be cleaned up
in the case of session dump.
As a side effect of doing this, the resulting code is smaller by almost 1kB.
All changed parts have been tested and provided expected output.
Adding health checks has become a real pain, with cross-references to all
checks everywhere because they're all a single bit. Since they're all
exclusive, let's change this to have a check number only. We reserve 4
bits allowing up to 16 checks (15+tcp), only 7 of which are currently
used. The code has shrunk by almost 1kB and we saved a few option bits.
The "dispatch" option has been moved to px->options, making a few tests
a bit cleaner.
It's very annoying that frontend and backend stats are merged because we
don't know what we're observing. For instance, if a "listen" instance
makes use of a distinct backend, it's impossible to know what the bytes_out
means.
Some points take care of not updating counters twice if the backend points
to the frontend, indicating a "listen" instance. The thing becomes more
complex when we try to add support for server side keep-alive, because we
have to maintain a pointer to the backend used for last request, and to
update its stats. But we can't perform such comparisons anymore because
the counters will not match anymore.
So in order to get rid of this situation, let's have both frontend AND
backend stats in the "struct proxy". We simply update the relevant ones
during activity. Some of them are only accounted for in the backend,
while others are just for frontend. Maybe we can improve a bit on that
later, but the essential part is that those counters now reflect what
they really mean.
This is in fact where those parts belong to. The old data_state was replaced
by applet.state and is now initialized when the applet is registered. It's
worth noting that the applet does not need to know the session nor the
buffer anymore since everything is brought by the stream interface.
It is possible that having a separate applet struct would simplify the
code but that's not a big deal.
src/frontend.c: In function 'frontend_accept':
src/frontend.c:110: warning: pointer targets in passing argument 5 of 'getsockopt' differ in signedness
The argument should be socklen_t and not int.
By passing a negative value to the "mss" argument of "bind" lines, it
becomes possible to subtract this value to the MSS advertised by the
client, which results in segments smaller than advertised. The effect
is useful with some TCP stacks which ACK less often when segments are
not full, because they only ACK every other full segment as suggested
by RFC1122.
NOTE: currently this has no effect on Linux kernel 2.6, a kernel patch
is still required to change the MSS of established connections.
The stream_sock's accept() used to close the FD upon error, but this
was also sometimes performed by the frontend's accept() called via the
session's accept(). Those interlaced calls were also responsible for the
spaghetti-looking error unrolling code in session.c and stream_sock.c.
Now the frontend must not close the FD anymore, the session is responsible
for that. It also takes care of just closing the FD or also removing from
the FD lists, depending on its state. The socket-level accept() does not
have to care about that anymore.
Some Alert() messages were remaining in the accept() path, which they
would have no chance to be detected. Remove some of them (the impossible
ones) and replace the relevant ones with send_log() so that the admin
has a chance to catch them.
The introduction of a new PROXY protocol for proxied connections requires
an early analyser to decode the incoming connection and set the session
flags accordingly.
Some more work is needed, among which setting a flag on the session to
indicate it's proxied, and copying the original parameters for later
comparisons with new ACLs (eg: real_src, ...).
A new function session_accept() is now called from the lower layer to
instanciate a new session. Once the session is instanciated, the upper
layer's frontent_accept() is called. This one can be service-dependant.
That way, we have a 3-phase accept() sequence :
1) protocol-specific, session-less accept(), which is pointed to by
the listener. It defaults to the generic stream_sock_accept().
2) session_accept() which relies on a frontend but not necessarily
for use in a proxy (eg: stats or any future service).
3) frontend_accept() which performs the accept for the service
offerred by the frontend. It defaults to frontend_accept() which
is really what is used by a proxy.
The TCP/HTTP proxies have been moved to this mode so that we can now rely on
frontend_accept() for any type of session initialization relying on a frontend.
The next step will be to convert the stats to use the same system for the stats.
This will be needed for the last factoring step which adds support
for application-level accept(). The tcp/http accept() code has now
been isolated and will have to move to a separate function.
Till now, the frontend relied on the backend's options for INDEPSTR,
while at the time of accept, the frontend and backend are the same.
So we now use the frontend's pointer instead of the backend and we
don't have any dependency on the backend anymore in the frontend's
accept code.
The conn_retries attribute is now assigned when switching from SI_ST_INI
to SI_ST_REQ. This eliminates one of the last dependencies on the backend
in the frontend's accept() function.
The conn_retries still lies in the session and its initialization depends
on the backend when it may not yet be known. Let's first move it to the
stream interface.
The frontend has no reason to initialize the server-side stream_interface.
It's a leftover from old times which now makes no sense due to the fact
that we don't know in the frontend whether the other side will be a socket,
a task or anything else. Removing this part is possible due to previous
patches which perform the initialization at the proper place. We'll still
have to be able to register an I/O handler for situations where everything
is known only to the frontend (eg: unix stats socket), before merging the
various instanciations of this accept() function.
It was particularly embarrassing that the server timeout was assigned
to buffers during an accept() just to be potentially changed later in
case of a use_backend rule. The frontend side has nothing to do with
server timeouts.
Now we initialize them right after the connect() succeeds. Later this
should change for a unique stream-interface timeout setting only.
The connection timeout stored in the buffer has not been used since the
stream interface were introduced. Let's get rid of it as it's one of the
things that complicate factoring of the accept() functions.
We can disable the monitor-net rules on a listener if this flag is not
set in the listener's options. This will be useful when we don't want
to check that fe->addr is set or not for non-TCP frontends.
The new LI_O_TCP_RULES listener option indicates that some TCP rules
must be checked upon accept on this listener. It is now checked by
the frontend and the L4 rules are evaluated only in this case. The
flag is only set when at least one tcp-req rule is present in the
frontend.
The L4 rules check function has now been moved to proto_tcp.c where
it ought to be.
The tcp inspection rules were fast but were only processed after a
schedule had occurred and all resources were allocated. When defending
against DDoS, it's important to be able to apply some protection the
earliest possible instant.
Thus we introduce a new set of rules : tcp-request rules which act
on pure layer4 information (no content). They are evaluated even
before the buffers are allocated for the session, saving as much
time as possible. That way it becomes possible to check an incoming
connection's source IP address against a list of authorized/blocked
networks, and immediately drop the connection.
The rules are checked even before we perform any socket-specific
operation, so that we can optimize the reject case, which will be the
problematic one during a DDoS. The second stream interface and s->txn
are also now initialized after the rules are parsed for the same
reason. All these optimisations have permitted to reach up to 212000
connnections/s with a real rule rejecting based on the source IP
address.
For a long time we had two large accept() functions, one for TCP
sockets instanciating proxies, and another one for UNIX sockets
instanciating the stats interface.
A lot of code was duplicated and both did not work exactly the same way.
Now we have a stream_sock layer accept() called for either TCP or UNIX
sockets, and this function calls the frontend-specific accept() function
which does the rest of the frontend-specific initialisation.
Some code is still duplicated (session & task allocation, stream interface
initialization), and might benefit from having an intermediate session-level
accept() callback to perform such initializations. Still there are some
minor differences that need to be addressed first. For instance, the monitor
nets should only be checked for proxies and not for other connection templates.
Last, we renamed l->private as l->frontend. The "private" pointer in
the listener is only used to store a frontend, so let's rename it to
eliminate this ambiguity. When we later support detached listeners
(eg: FTP), we'll add another field to avoid the confusion.
The 'client.c' file now only contained frontend-specific functions,
so it has naturally be renamed 'frontend.c'. Same for client.h. This
has also been an opportunity to remove some cross references from
files that should not have depended on it.
In the end, this file should contain a protocol-agnostic accept()
code, which would initialize a session, task, etc... based on an
accept() from a lower layer. Right now there are still references
to TCP.
