This patch splits current dns.c into two files:
The first dns.c contains code related to DNS message exchange over UDP
and in future other TCP. We try to remove depencies to resolving
to make it usable by other stuff as DNS load balancing.
The new resolvers.c inherit of the code specific to the actual
resolvers.
Note:
It was really difficult to obtain a clean diff dur to the amount
of moved code.
Note2:
Counters and stuff related to stats is not cleany separated because
currently counters for both layers are merged and hard to separate
for now.
in the same manner of agentaddr, we now:
- permit to set agentport through `port` keyword, like it is the case
for agentaddr through `addr`
- set the priority on `agent-port` keyword when used
- add a flag to be able to test when the value is set like for agentaddr
it makes the behaviour between `addr` and `port` more consistent.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
small consistency problem with `addr` and `agent-addr` options:
for the both options, the last one parsed is always used to set the
agent-check addr. Thus these two lines don't have the same behavior:
server ... addr <addr1> agent-addr <addr2>
server ... agent-addr <addr2> addr <addr1>
After this patch `agent-addr` will always be the priority option over
`addr`. It means we test the flag before setting agentaddr.
We also fix all the places where we did not set the flag to be coherent
everywhere.
I was not really able to determine where this issue is coming from. So
it is probable we may backport it to all stable version where the agent
is supported.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
While trying to fix some consistency problem with the config file/cli
(e.g. check-port cli command does not set the flag), we realised
checkport flag was not necessarily needed. Indeed tcpcheck uses service
port as the last choice if check.port is zero. So we can assume if
check.port is zero, it means it was never set by the user, regardless if
it is by the cli or config file. In the longterm this will avoid to
introduce a new consistency issue if we forget to set the flag.
in the same manner of checkport flag, we don't really need checkaddr
flag. We can assume if checkaddr is not set, it means it was never set
by the user or config.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
The function get_check_status_result() can now be used to get the result
code (CHK_RES_*) corresponding to a check status (HCHK_STATUS_*). It will be
used by the Prometheus exporter when reporting the check status of a server.
The check I/O handler, process_chk_conn and server_warmup are often
present in complex backtraces as they're impacted by locking or I/O
issues. Let's export them so that they resolve cleanly.
When a tcpcheck ruleset uses multiple connections, the existing one must be
closed and destroyed before openning the new one. This part is handled in
the tcpcheck_main() function, when called from the wake callback function
(wake_srv_chk). But it is indeed a problem, because this function may be
called from the mux layer. This means a mux may call the wake callback
function of the data layer, which may release the connection and the mux. It
is easy to see how it is hazardous. And actually, depending on the
scheduling, it leads to crashes.
Thus, we must avoid to release the connection in the wake callback context,
and move this part in the check's process function instead. To do so, we
rely on the CHK_ST_CLOSE_CONN flags. When a connection must be replaced by a
new one, this flag is set on the check, in tcpcheck_main() function, and the
check's task is woken up. Then, the connection is really closed in
process_chk_conn() function.
This patch must be backported as far as 2.2, with some adaptations however
because the code is not exactly the same.
If a server is defined in a frontend, thus a proxy without the backend
capability, the 'check' and 'agent-check' keywords are ignored. This way, no
check is performed on an ignored server. This avoids a segfault because some
part of the tcpchecks are not fully initialized (or released for frontends
during the post-check).
In addition, an test on the server's proxy capabilities is performed when
checks or agent-checks are initialized and nothing is performed for servers
attached to a non-backend proxy.
This patch should fix the issue #1043. It must be backported as far as 2.2.
This was a leftover of the pre-mux v1.8-dev3 era. It makes no sense anymore
to try to disable polling on a connection we don't own, it's the mux's job
and it's properly done upon shutdowns and closes.
As explained in previous commit, the situation is absurd as we try to
cleanly drain pending data before impolitely shutting down, and it could
be counter productive on real muxes. Let's use cs_drain_and_close() instead.
Regarding the health counter, a check finished with the CONDPASS result is
now the same than with the PASSED result: The health counter is always
incemented. Before, it was only performed is the health counter was not 0.
There is no change for the disable-on-404 option because it is only
evaluated for running or stopping servers. So with an health check counter
greater than 0. But it will make possible to handle (STOPPED -> STOPPING)
transition for servers.
The parsing of the check options based on tcp-check rules (redis, spop,
smtp, http...) are moved aways from check.c. Now, these functions are placed
in tcpcheck.c. These functions are only related to the tcpcheck ruleset
configured on a proxy and not to the health-check attached to a server.
The special handling of in-progress connect rules at the begining of
tcpcheck_main() function can be removed. Instead, at the begining of the
tcpcheck_eval_connect() function, we test is there is already an existing
connection. In this case, it means we are waiting for a connection
establishment. In addition, before evaluating a new connect rule, we take
care to release any previous connection.
Historically, the input and output buffers of a check are allocated by hand
during the startup, with a specific size (not necessarily the same than
other buffers). But since the recent refactoring of the checks to rely
exclusively on the tcp-checks and to use the underlying mux layer, this part
is totally buggy. Indeed, because these buffers are now passed to a mux,
they maybe be swapped if a zero-copy is possible. In fact, for now it is
only possible in h2_rcv_buf(). Thus the bug concretely only exists if a h2
health-check is performed. But, it is a latent bug for other muxes.
Another problem is the size of these buffers. because it may differ for the
other buffer size, it might be source of bugs.
Finally, for configurations with hundreds of thousands of servers, having 2
buffers per check always allocated may be an issue.
To fix the bug, we now allocate these buffers when required using the buffer
pool. Thus not-running checks don't waste memory and muxes may swap them if
possible. The only drawback is the check buffers have now always the same
size than buffers used by the streams. This deprecates indirectly the
"tune.chksize" global option.
In addition, the http-check regtest have been update to perform some h2
health-checks.
Many thanks to @VigneshSP94 for its help on this bug.
This patch should solve the issue #936. It relies on the commit "MINOR:
tcpcheck: Don't handle anymore in-progress send rules in tcpcheck_main".
Both must be backport as far as 2.2.
bla
When a new kind of check is found during the parsing of a proxy section (via
an option directive), we must reset tcpcheck flags for this proxy. It is
mandatory to not inherit some flags from a previously declared check (for
instance in the default section).
This patch must be backported as far as 2.2.
Return ERR_NONE instead of 0 on success for all config callbacks that should
return ERR_* codes. There is no change because ERR_NONE is a macro equals to
0. But this makes the return value more explicit.
When tcp-check or http-check rules are used, if the corresponding check option
(option tcp-check and option httpchk) is declared after the ruleset, a warning
is emitted about an unused check ruleset while there is no problem in reality.
This patch must be backported as far as 2.2.
If the check mux has been explicitly defined but is incompatible with
the selected check type (tcp-check vs http-check), report a warning and
prevent haproxy startup.
Only reuse the mux from server if the check is using the same mode.
For example, this prevents a tcp-check on a h2 server to select the h2
multiplexer instead of passthrough.
This bug was introduced by the following commit :
BUG/MEDIUM: checks: Use the mux protocol specified on the server line
It must be backported up to 2.2.
Fixes github issue #945.
When a health-check fails, if no connection attempt was performed, a socket
error must be reported. But this was only done if the connection was not
allocated. It must also be done if there is no control layer. Otherwise, a
L7TOUT will be reported instead.
It is possible to not having a control layer for a connection if the connection
address family is invalid or not defined.
This patch must be backported to 2.2.
The remaining proxy states were only used to distinguish an enabled
proxy from a disabled one. Due to the initialization order, both
PR_STNEW and PR_STREADY were equivalent after startup, and they
would only differ from PR_STSTOPPED when the proxy is disabled or
shutdown (which is effectively another way to disable it).
Now we just have a "disabled" field which allows to distinguish them.
It's becoming obvious that start_proxies() is only used to print a
greeting message now, that we'd rather get rid of. Probably that
zombify_proxy() and stop_proxy() should be merged once their
differences move to the right place.
Most callers of str2sa_range() need the protocol only to check that it
provides a ->connect() method. It used to be used to verify that it's a
stream protocol, but it might be a bit early to get rid of it. Let's keep
the test for now but move it to str2sa_range() when the new flag PA_O_CONNECT
is present. This way almost all call places could be cleaned from this.
There's a strange test in the server address parsing code that rechecks
the family from the socket which seems to be a duplicate of the previously
removed tests. It will have to be rechecked.
We'll need this so that it can return pointers to stacked protocol in
the future (for QUIC). In addition this removes a lot of tests for
protocol validity in the callers.
Some of them were checked further apart, or after a call to
str2listener() and they were simplified as well.
There's still a trick, we can fail to return a protocol in case the caller
accepts an fqdn for use later. This is what servers do and in this case it
is valid to return no protocol. A typical example is:
server foo localhost:1111
If a file descriptor was passed, we can optionally return it. This will
be useful for listening sockets which are both a pre-bound FD and a ready
socket.
These flags indicate whether the call is made to fill a bind or a server
line, or even just send/recv calls (like logs or dns). Some special cases
are made for outgoing FDs (e.g. pipes for logs) or socket FDs (e.g external
listeners), and there's a distinction between stream or dgram usage that's
expected to significantly help str2sa_range() proceed appropriately with
the input information. For now they are not used yet.
Now that str2sa_range() checks for appropriate port specification, we
don't need to implement adhoc test cases in every call place, if the
result is valid, the conditions are met otherwise the error message is
appropriately filled.
Now str2sa_range() will enforce the caller's port specification passed
using the PA_O_PORT_* flags, and will return an error on failure. For
optional ports, values 0-65535 will be enforced. For mandatory ports,
values 1-65535 are enforced. In case of ranges, it is also verified that
the upper bound is not lower than the lower bound, as this used to result
in empty listeners.
I couldn't find an easy way to test this using VTC since the purpose is
to trigger parse errors, so instead a test file is provided as
tests/ports.cfg with comments about what errors are expected for each
line.
We currently have an argument to require that the address is resolved
but we'll soon add more, so let's turn it into a bit field. The old
"resolve" boolean is now PA_O_RESOLVE.
Changes performed using the following coccinelle patch:
@@
type T;
expression E;
expression t;
@@
(
t = calloc(E, sizeof(*t))
|
- t = calloc(E, sizeof(T))
+ t = calloc(E, sizeof(*t))
)
Looking through the commit history, grepping for coccinelle shows that the same
replacement with a different patch was already performed in the past in commit
02779b6263.
The allocation did not account for either the trailing null byte or the
space, leading to a buffer overwrite.
This bug was detected by an assertion failure in the allocator. But can
also be easily detected using valgrind:
==25827== Invalid write of size 1
==25827== at 0x6529759: __vsprintf_chk (vsprintf_chk.c:84)
==25827== by 0x65296AC: __sprintf_chk (sprintf_chk.c:31)
==25827== by 0x4D6AB7: sprintf (stdio2.h:33)
==25827== by 0x4D6AB7: proxy_parse_smtpchk_opt (check.c:1799)
==25827== by 0x4A7DDD: cfg_parse_listen (cfgparse-listen.c:2269)
==25827== by 0x494AD3: readcfgfile (cfgparse.c:2167)
==25827== by 0x542995: init (haproxy.c:2021)
==25827== by 0x421DD2: main (haproxy.c:3121)
==25827== Address 0x78712a8 is 0 bytes after a block of size 24 alloc'd
==25827== at 0x4C2FB55: calloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==25827== by 0x4D6A8C: proxy_parse_smtpchk_opt (check.c:1797)
==25827== by 0x4A7DDD: cfg_parse_listen (cfgparse-listen.c:2269)
==25827== by 0x494AD3: readcfgfile (cfgparse.c:2167)
==25827== by 0x542995: init (haproxy.c:2021)
==25827== by 0x421DD2: main (haproxy.c:3121)
This patch fixes issue #681.
This bug was introduced in commit fbcc77c6ba,
which first appeared in 2.2-dev7. No backport needed.
Getting rid of this warning is cleaner solved using a 'fall through' comment,
because it clarifies intent to a human reader.
This patch adjust a few places that cause -Wimplicit-fallthrough to trigger:
- Fix typos in the comment.
- Remove redundant 'no break' that trips up gcc from comment.
- Move the comment out of the block when the 'case' is completely surrounded
by braces.
- Add comments where I could determine that the fall through was intentional.
Changes tested on
gcc (Debian 9.3.0-13) 9.3.0
Copyright (C) 2019 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
using
make -j4 all TARGET=linux-glibc USE_OPENSSL=1 USE_LUA=1 USE_ZLIB=1 USE_PCRE2=1 USE_PCRE2_JIT=1 USE_GETADDRINFO=1
The set of files proto_udp.{c,h} were misleadingly named, as they do not
provide anything related to the UDP protocol but to datagram handling
instead, since currently all UDP processing is hard-coded where it's used
(dns, logs). They are to UDP what connection.{c,h} are to proto_tcp. This
was causing confusion about how to insert UDP socket management code,
so let's rename them right now to dgram.{c,h} which more accurately
matches what's inside since every function and type is already prefixed
with "dgram_".
This patch fixes all the leftovers from the include cleanup campaign. There
were not that many (~400 entries in ~150 files) but it was definitely worth
doing it as it revealed a few duplicates.
Checks.c remains one of the largest file of the project and it contains
too many things. The tcpchecks code represents half of this file, and
both parts are relatively isolated, so let's move it away into its own
file. We now have tcpcheck.c, tcpcheck{,-t}.h.
Doing so required to export quite a number of functions because check.c
has almost everything made static, which really doesn't help to split!
check.c is one of the largest file and contains too many things. The
e-mail alerting code is stored there while nothing is in mailers.c.
Let's move this code out. That's only 4% of the code but a good start.
In order to do so, a few tcp-check functions had to be exported.
There's no point splitting the file in two since only cfgparse uses the
types defined there. A few call places were updated and cleaned up. All
of them were in C files which register keywords.
There is nothing left in common/ now so this directory must not be used
anymore.
extern struct dict server_name_dict was moved from the type file to the
main file. A handful of inlined functions were moved at the bottom of
the file. Call places were updated to use server-t.h when relevant, or
to simply drop the entry when not needed.
The files remained mostly unchanged since they were OK. However, half of
the users didn't need to include them, and about as many actually needed
to have it and used to find functions like srv_currently_usable() through
a long chain that broke when moving the file.
This one is particularly difficult to split because it provides all the
functions used to manipulate a proxy state and to retrieve names or IDs
for error reporting, and as such, it was included in 73 files (down to
68 after cleanup). It would deserve a small cleanup though the cut points
are not obvious at the moment given the number of structs involved in
the struct proxy itself.
The current state of the logging is a real mess. The main problem is
that almost all files include log.h just in order to have access to
the alert/warning functions like ha_alert() etc, and don't care about
logs. But log.h also deals with real logging as well as log-format and
depends on stream.h and various other things. As such it forces a few
heavy files like stream.h to be loaded early and to hide missing
dependencies depending where it's loaded. Among the missing ones is
syslog.h which was often automatically included resulting in no less
than 3 users missing it.
Among 76 users, only 5 could be removed, and probably 70 don't need the
full set of dependencies.
A good approach would consist in splitting that file in 3 parts:
- one for error output ("errors" ?).
- one for log_format processing
- and one for actual logging.
Just some minor reordering, and the usual cleanup of call places for
those which didn't need it. We don't include the whole tools.h into
stats-t anymore but just tools-t.h.
All includes that were not absolutely necessary were removed because
checks.h happens to very often be part of dependency loops. A warning
was added about this in check-t.h. The fields, enums and structs were
a bit tidied because it's particularly tedious to find anything there.
It would make sense to split this in two or more files (at least
extract tcp-checks).
The file was renamed to the singular because it was one of the rare
exceptions to have an "s" appended to its name compared to the struct
name.
