The function is not TCP-specific at all, it covers all FD-based sockets
so let's move this where other similar functions are, in connection.c,
and rename it conn_fd_check().
Instead of using the same type for regular linked lists and "autolocked"
linked lists, use a separate type, "struct mt_list", for the autolocked one,
and introduce a set of macros, similar to the LIST_* macros, with the
MT_ prefix.
When we use the same entry for both regular list and autolocked list, as
is done for the "list" field in struct connection, we know have to explicitely
cast it to struct mt_list when using MT_ macros.
Given that all our I/Os are now directed from top to bottom and not the
opposite way around, and the FD cache was removed, it doesn't make sense
anymore to create FDs that are marked not ready since this would prevent
the first accesses unless the caller explicitly does an fd_may_recv()
which is not expected to be its job (which conn_ctrl_init() has to do
by the way). Let's move this into fd_insert() instead, and have a single
atomic operation for both directions via fd_may_both().
Since commit 7ac0e35f2 in 1.9-dev1 ("MAJOR: fd: compute the new fd polling
state out of the fd lock") we've started to update the FD POLLED bit a
bit more aggressively. Lately with the removal of the FD cache, this bit
is always equal to the ACTIVE bit. There's no point continuing to watch
it and update it anymore, all it does is create confusion and complicate
the code. One interesting side effect is that it now becomes visible that
all fd_*_{send,recv}() operations systematically call updt_fd_polling(),
except fd_cant_recv()/fd_cant_send() which never saw it change.
Save the authority TLV in a PROXYv2 header from the client connection,
if present, and make it available as fc_pp_authority.
The fetch can be used, for example, to set the SNI for a backend TLS
connection.
Now addresses are dynamically allocated when needed. Each connection is
created with src=dst=NULL, these entries are allocated on the fly, and
released when the connection is released.
This commit places calls to sockaddr_alloc() at the places where an address
is needed, and makes sure that the allocation is properly tested. This does
not add too many error paths since connection allocations are already in the
vicinity and share the same error paths. For the two cases where a
clear_addr() was called, instead the address was not allocated.
This pool will be used to allocate storage for source and destination
addresses used in connections. Two functions sockaddr_{alloc,free}()
were added and will have to be used everywhere an address is needed.
These ones are safe for progressive replacement as they check that the
existing pointer is set before replacing it. The pool is not yet used
during allocation nor freeing. Also they operate on pointers to pointers
so they will perform checks and replace values. The free one nulls the
pointer.
This is in preparation for the switch to dynamic address allocation,
let's migrate the code using the old fields to the pointers instead.
Note that no extra check was added for now, the purpose is only to
get the code to use the pointers and still work.
In the proxy protocol message handling we make sure the addresses are
properly allocated before declaring them unset.
At the moment we're facing difficulties with connection reuse based on
the fact that connections may be allocated very early only to set a
target address in transparent mode. With the imminent removal of the
legacy mode, the connection reuse by a same stream will not exist
anymore and all this awful complexity is not justified anymore. However
we still need to be able to assign addresses somewhere.
Thus instead of allocating a connection, we'll only place addresses where
needed in the stream during operations. But this takes quite some room
(typically 128 bytes). This is a nice opportunity for cleaning all this
up and dynamically allocatating the addresses fields, which will result
in actually saving memory from connection structs since most of the time
the client's "to" address is not used and the server's "from" is not used
either, thus saving ~256 bytes per end-to-end connection.
For now these new "src" and "dst" pointers point to addr.from and addr.to.
This will allow us to smoothly update the whole code to use these pointers
prior to going further and switching them to pools.
These functions are not used anymore. They didn't report failures and
as such were often misused. conn_get_src() and conn_get_dst() now
replaced them everywhere.
These functions currently are the same as conn_get_from_addr() and
conn_get_to_addr() respectively except that they return a status for
the operation that the caller can test.
Since the legacy HTTP mode is disabled and no multiplexer relies on it anymore,
there is no reason to have 2 multiplexer protocols for the HTTP. So the protocol
PROTO_MODE_HTX was removed and all HTTP multiplexers use now PROTO_MODE_HTTP.
When we're purging idle connections, there's a race condition, when we're
removing the connection from the idle list, to add it to the list of
connections to free, if the thread owning the connection tries to free it
at the same time.
To fix this, simply add a per-thread lock, that has to be hold before
removing the connection from the idle list, and when, in conn_free(), we're
about to remove the connection from every list. That way, we know for sure
the connection will stay valid while we remove it from the idle list, to add
it to the list of connections to free.
This should happen rarely enough that it shouldn't have any impact on
performances.
This has not been reported yet, but could provoke random segfaults.
This should be backported to 2.0.
Just calling conn_force_unsubscribe() from conn_upgrade_mux_fe() is not
enough, as there may be multiple XPRT involved. Instead, require that
any user of conn_upgrade_mux_fe() unsubscribe itself before calling it.
This should fix upgrading a TCP connection to HTX when using SSL.
This should be backported to 2.0.
Revert commit fe4abe62c7.
The goal was to make sure for health-checks, we would not get sockets in
TIME_WAIT. To do so, we would not call shutdown() if linger_risk is set.
However that is wrong, and that means shutw would never be forwarded to
the server, and thus we could get connection that are never properly closed.
Instead, to fix the original problem as described here :
https://www.mail-archive.com/haproxy@formilux.org/msg34080.html
Just make sure the checks code call cs_shutr() before calling cs_shutw().
If shutr has been called, conn_sock_shutw() will make no attempt to call
shutdown(), as it knows close() will be called.
We should really review and revamp the shutr/shutw code, as described in
github issue #142.
This should be backported to 1.9 and 2.0.
In conn_sock_shutw(), avoid calling shutdown() if linger_risk is set. Not
doing so will result in getting sockets in TIME_WAIT for some time.
This is particularly observable with health checks.
This should be backported to 1.9.
It's really confusing to call it a task because it's a tasklet and used
in places where tasks and tasklets are used together. Let's rename it
to tasklet to remove this confusion.
Now that the various handshakes come with their own XPRT, there's no
need for the CONN_FL_SOCK* flags, and the conn_sock_want|stop functions,
so garbage-collect them.
Add a new XPRT that is used when using non-SSL handshakes, such as proxy
protocol or Netscaler, instead of taking care of it in conn_fd_handler().
This XPRT is installed when any of those is used, and it removes itself once
the handshake is done.
This should allow us to remove the distinction between CO_FL_SOCK* and
CO_FL_XPRT*.
Have "socks4" and "check-via-socks4" server keyword added.
Implement handshake with SOCKS4 proxy server for tcp stream connection.
See issue #82.
I have the "SOCKS: A protocol for TCP proxy across firewalls" doc found
at "https://www.openssh.com/txt/socks4.protocol". Please reference to it.
[wt: for now connecting to the SOCKS4 proxy over unix sockets is not
supported, and mixing IPv4/IPv6 is discouraged; indeed, the control
layer is unique for a connection and will be used both for connecting
and for target address manipulation. As such it may for example report
incorrect destination addresses in logs if the proxy is reached over
IPv6]
In conn_xprt_close(), after calling xprt->close(), don't forget to set
conn->xprt_ctx to NULL, or we may attempt to reuse the now-free'd
conn->xprt_ctx if the connection failed and we're retrying it.
We have various functions like conn_get_ctrl_name() to retrieve
some information reported in "show sess" for debugging, which
assume that the connection is valid. This is really not convenient
in code aimed at debugging and is error-prone. Let's add a validity
test first.
Since the commit 1d2b586cd ("MAJOR: htx: Enable the HTX mode by default for all
proxies"), the HTX is enabled by default for all proxies, HTTP and TCP, but also
CLI and HEALTH proxies. But when the best mux is retrieved, only HTTP and TCP
modes are checked. If the TCP mode is not explicitly set, it is considered as an
HTTP proxy. It is an hidden bug introduced when the option "http-use-htx" was
added. It has no effect until the commit 1d2b586cd. But now, when a stats socket
is created for the master process, the mux h1 is installed on all incoming
connections to the CLI proxy, leading to segfaults because HTX operations are
performed on raw buffers.
So to fix the buf, when a mux is installed, all proxies are considered as TCP
proxies, except HTTP ones. This way, CLI and HEALTH proxies will be handled as
TCP proxies.
This patch must be backported to 1.9 although it has no effect. It is safer to
not keep hidden bugs.
For most of the xprt methods, provide a xprt_ctx. This will be useful later
when we'll want to be able to stack xprts.
The init() method now has to create and provide the said xprt_ctx if needed.
This function will handle mux upgrades, for frontend connections only. It will
retrieve the best mux in the same way than conn_install_mux_fe except that the
mode and optionnally the proto are forced.
The new multiplexer is initialized using a new context and a specific input
buffer. Then, the old one is destroyed. If an error occurred, everything is
rolled back.
The mux's callback init() now take a pointer to a buffer as extra argument. It
must be used by the multiplexer as its input buffer. This buffer is always NULL
when a multiplexer is initialized with a fresh connection. But if a mux upgrade
is performed, it may be filled with existing data. Note that, for now, mux
upgrades are not supported. But this commit is mandatory to do so.
Since LIST_DEL_LOCKED() and LIST_POP_LOCKED() now automatically reinitialize
the removed element, there's no need for keeping this LIST_INIT() call in the
idle connection code.
Use the locked macros when manipulating idle_orphan_conns, so that other
threads can remove elements from it.
It will be useful later to avoid having a task per server and per thread to
cleanup the orphan list.
Add a per-thread counter of idling connections, and use it to determine
how many connections we should kill after the timeout, instead of using
the global counter, or we're likely to just kill most of the connections.
This should be backported to 1.9.
Use atomic operations when dealing with srv->curr_idle_conns, as it's shared
between threads, otherwise we could get inconsistencies.
This should be backported to 1.9.
When mux->init() fails, session_free() will call it again to unregister
it while it was already done, resulting in null derefs or use-after-free.
This typically happens on out-of-memory conditions during H1 or H2 connection
or stream allocation.
This fix must be backported to 1.9.
Instead of keeping track of the number of connections we're responsible for,
keep track of the number of connections we're responsible for that we are
currently considering idling (ie that we are not using, they may be in use
by other sessions), that way we can actually reuse connections when we have
more connections than the max configured.
When a session adds a connection to its connection list, we used to remove
connections for an another server if there were not enough room for our
server. This can't work, because those lists are now the list of connections
we're responsible for, not just the idle connections.
To fix this, allow for an unlimited number of servers, instead of using
an array, we're now using a linked list.
There was a reference to struct stream in conn_free() for the case
where we're freeing a connection that doesn't have a mux attached.
For now we know it's always a stream, and we only need to do it to
put a NULL in s->si[1].end.
Let's do it better by storing the pointer to si[1].end in the context
and specifying that this pointer is always nulled if the mux is null.
This way it allows a connection to detach itself from wherever it's
being used. Maybe we could even get rid of the condition on the mux.
We most often store the mux context there but it can also be something
else while setting up the connection. Better call it "ctx" and know
that it's the owner's context than misleadingly call it mux_ctx and
get caught doing suspicious tricks.
The SUB_CAN_SEND/SUB_CAN_RECV enum values have been confusing a few
times, especially when checking them on reading. After some discussion,
it appears that calling them SUB_RETRY_SEND/SUB_RETRY_RECV more
accurately reflects their purpose since these events may only appear
after a first attempt to perform the I/O operation has failed or was
not completed.
In addition the wait_reason field in struct wait_event which carries
them makes one think that a single reason may happen at once while
it is in fact a set of events. Since the struct is called wait_event
it makes sense that this field is called "events" to indicate it's the
list of events we're subscribed to.
Last, the values for SUB_RETRY_RECV/SEND were swapped so that value
1 corresponds to recv and 2 to send, as is done almost everywhere else
in the code an in the shutdown() call.
In session, don't keep an infinite number of connection that can idle.
Add a new frontend parameter, "max-session-srv-conns" to set a max number,
with a default value of 5.
Instead of trying to get the session from the connection, which is not
always there, and of course there could be multiple sessions per connection,
provide it with the init() and attach() methods, so that we know the
session for each outgoing stream.
Add a new command, "pool-max-conn" that sets the maximum number of connections
waiting in the orphan idling connections list (as activated with idle-timeout).
Using "-1" means unlimited. Using pools is now dependant on this.
There were a number of ugly setsockopt() calls spread all over
proto_http.c, proto_htx.c and hlua.c just to manipulate the front
connection's TOS, mark or TCP quick-ack. These ones entirely relied
on the connection, its existence, its control layer's presence, and
its addresses. Worse, inet_set_tos() was placed in proto_http.c,
exported and used from the two other ones, surrounded in #ifdefs.
This patch moves this code to connection.h and makes the other ones
rely on it without ifdefs.
We currently have conn_get_best_mux() to return the best mux for a
given protocol name, side and proxy mode. But we need the mux entry
as well in order to fix the bind_conf and servers at the end of the
config parsing. Let's split the function in two parts. It's worth
noting that the <conn> argument is never used anymore so this part
is eligible to some cleanup.
It looks like we forgot to report HTX when listing the muxes and their
respective protocols, leading to "NONE" being displayed. Let's report
"HTX" and "HTTP|HTX" since both will exist. Also fix a minor typo in
the output message.
Instead of just storing the last connection in the session, store all of
the connections, for at most MAX_SRV_LIST (currently 5) targets.
That way we can do keepalive on more than 1 outgoing connection when the
client uses HTTP/2.
This commit replaces the explicit pool creation that are made in
constructors with a pool registration. Not only this simplifies the
pools declaration (it can be done on a single line after the head is
declared), but it also removes references to pools from within
constructors. The only remaining create_pool() calls are those
performed in init functions after the config is parsed, so there
is no more user of potentially uninitialized pool now.
It has been the opportunity to remove no less than 12 constructors
and 6 init functions.
