The silent-drop action was extended with an additional optional parameter,
[rst-ttl <ttl> ], causing HAProxy to send a TCP RST with the specified TTL
towards the client.
With this behaviour, the connection state on your own client-
facing middle-boxes (load balancers, firewalls) will be purged,
but the client will still assume the TCP connection is up because
the TCP RST packet expires before reaching the client.
This file contains all the stream-connector functions that are specific
to application layers of type stream. So let's name it accordingly so
that it's easier to figure what's located there.
The alphabetical ordering of include files was preserved.
Release the expression used by the set-{src,dst}[-port] actions so we
keep valgrind happy upon an exit or an haproxy -c.
Could be backported in every supported version.
There were plenty of leftovers from old code that were never removed
and that are not needed at all since these files do not use any
definition depending on fcntl.h, let's drop them.
Flags to disable lingering and half-close are now handled at the conn-stream
level. Thus SI_FL_NOLINGER and SI_FL_NOHALF stream-int flags are replaced by
CS_FL_NOLINGER and CS_FL_NOHALF conn-stream flags.
The source and destination addresses at the applicative layer are moved from
the stream-interface to the conn-stream. This simplifies a bit the code and
it is a logicial step to remove the stream-interface.
Some syscalls at the TCP level act directly on the FD. Some of them
are used by TCP actions like set-tos, set-mark, silent-drop, others
try to retrieve TCP info, get the source or destination address. These
ones must not be called with an invalid FD coming from an FD-less
connection, so let's add the relevant tests for this. It's worth
noting that all these ones already have fall back plans (do nothing,
error, or switch to alternate implementation).
Thanks to all previous changes, it is now possible to move the
stream-interface into the conn-stream. To do so, some SI functions are
removed and their conn-stream counterparts are added. In addition, the
conn-stream is now responsible to create and release the
stream-interface. While the stream-interfaces were inlined in the stream
structure, there is now a pointer in the conn-stream. stream-interfaces are
now dynamically allocated. Thus a dedicated pool is added. It is a temporary
change because, at the end, the stream-interface structure will most
probably disappear.
To be able to move the stream-interface from the stream to the conn-stream,
all access to the SI is done via the conn-stream. This patch is limited to
the tcp-act part.
This patch was reverted because it was inconsitent to change connection
addresses at stream level. Especially in HTTP because all requests was
affected by this change and not only the current one. In HTTP/2, it was
worse. Several streams was able to change the connection addresses at the
same time.
It is no longer an issue, thanks to recent changes. With multi-level client
source and destination addresses, it is possible to limit the change to the
current request. Thus this patch can be reintroduced.
If it possible to set source IP/Port from "tcp-request connection",
"tcp-request session" and "http-request" rules but not from "tcp-request
content" rules. There is no reason for this limitation and it may be a
problem for anyone wanting to call a lua fetch to dynamically set source
IP/Port from a TCP proxy. Indeed, to call a lua fetch, we must have a
stream. And there is no stream when "tcp-request connection/session" rules
are evaluated.
Thanks to this patch, "set-src" and "set-src-port" action are now supported
by "tcp_request content" rules.
This patch is related to the issue #1303.
When client source or destination addresses are changed via a tcp/http
action, we update addresses at the appropriate level. When "tcp-request
connection" rules are evaluated, we update addresses at the connection
level. When "tcp-request session" rules is evaluated, we update those at the
session level. And finally, when "tcp-request content" or "http-request"
rules are evaluated, we update the addresses at the stream level.
The same is performed when source or destination ports are changed.
Of course, for now, not all level are supported. But thanks to this patch,
it will be possible.
This reverts commit 19bbbe0562.
For now, set-src/set-src-port actions are directly performed on the client
connection. Using these actions at the stream level is really a problem with
HTTP connection (See #90) because all requests are affected by this change
and not only the current request. And it is worse with the H2, because
several requests can set their source address into the same connection at
the same time.
It is already an issue when these actions are called from "http-request"
rules. It is safer to wait a bit before adding the support to "tcp-request
content" rules. The solution is to be able to set src/dst address on the
stream and not on the connection when the action if performed from the L7
level..
Reverting the above commit means the issue #1303 is no longer fixed.
This patch must be backported in all branches containing the above commit
(as far as 2.0 for now).
Since recent commit 469c06c30 ("MINOR: http-act/tcp-act: Add "set-mark"
and "set-tos" for tcp content rules") there's a build warning (or error)
on Windows due to static function tcp_action_set_mark() not being used
because the set-mark functionality is not supported there. It's caused
by the fact that only the parsing function uses it so if the code is
ifdefed out the function remains unused.
Let's surround it with ifdefs as well, and do the same for
tcp_action_set_tos() which could suffer the same fate on operating systems
not defining IP_TOS.
This may need to be backported if the patch above is backported. Also
be careful, the condition was adjusted to cover FreeBSD after commit
f7f53afcf ("BUILD/MEDIUM: tcp: set-mark setting support for FreeBSD.").
It is now possible to set the Netfilter MARK and the TOS field value in all
packets sent to the client from any tcp-request rulesets or the "tcp-response
content" one. To do so, the parsing of "set-mark" and "set-tos" actions are
moved in tcp_act.c and the actions evaluation is handled in dedicated functions.
This patch may be backported as far as 2.2 if necessary.
If it possible to set source IP/Port from "tcp-request connection",
"tcp-request session" and "http-request" rules but not from "tcp-request
content" rules. There is no reason for this limitation and it may be a
problem for anyone wanting to call a lua fetch to dynamically set source
IP/Port from a TCP proxy. Indeed, to call a lua fetch, we must have a
stream. And there is no stream when "tcp-request connection/session" rules
are evaluated.
Thanks to this patch, "set-src" and "set-src-port" action are now supported
by "tcp_request content" rules.
This patch is related to the issue #1303. It may be backported to all stable
versions.
This patch replaces roughly all occurrences of an HA_ATOMIC_ADD(&foo, 1)
or HA_ATOMIC_SUB(&foo, 1) with the equivalent HA_ATOMIC_INC(&foo) and
HA_ATOMIC_DEC(&foo) respectively. These are 507 changes over 45 files.
No need to keep this flag apart any more, let's merge it into the global
state. The CLI's output state was extended to 6 digits and the linger/cloned
flags moved inside the parenthesis.
Historically we've used SOL_IP/SOL_IPV6/SOL_TCP everywhere as the socket
level value in getsockopt() and setsockopt() but as we've seen over time
it regularly broke the build and required to have them defined to their
IPPROTO_* equivalent. The Linux ip(7) man page says:
Using the SOL_IP socket options level isn't portable; BSD-based
stacks use the IPPROTO_IP level.
And it indeed looks like a pure linuxism inherited from old examples and
documentation. strace also reports SOL_* instead of IPPROTO_*, which does
not help... A check to linux/in.h shows they have the same values. Only
SOL_SOCKET and other non-IP values make sense since there is no IPPROTO
equivalent.
Let's get rid of this annoying confusion by removing all redefinitions of
SOL_IP/IPV6/TCP and using IPPROTO_* instead, just like any other operating
system. This also removes duplicated tests for the same value.
Note that this should not result in exposing syscalls to other OSes
as the only ones that were still conditionned to SOL_IPV6 were for
IPV6_UNICAST_HOPS which already had an IPPROTO_IPV6 equivalent, and
IPV6_TRANSPARENT which is Linux-specific.
Lukas reported in issue #1203 that the previous fix for silent-drop in
commit ab79ee8b1 ("BUG/MINOR: tcp: fix silent-drop workaround for IPv6")
breaks the build on FreeBSD/MacOS due to SOL_IPV6 not being defined. On
these platforms, IPPROTO_IPV6 must be used instead, so this should fix
it.
This needs to be backported to whatever version the fix above is backported
to.
As reported in github issue #1203 the TTL-based workaround that is used
when permissions are insufficient for the TCP_REPAIR trick does not work
for IPv6 because we're using only SOL_IP with IP_TTL. In IPv6 we have to
use SOL_IPV6 and IPV6_UNICAST_HOPS. Let's pick the right one based on the
source address's family.
This may be backported to all versions.
When implementing a client applet, a NULL dereference was encountered on
the error path which increment the counters.
Indeed, the counters incremented are the one in the listener which does
not exist in the case of client applets, so in sess->listener->counters,
listener is NULL.
This patch fixes the access to the listener structure when accessing
from a sesssion, most of the access are the counters in error paths.
Must be backported as far as 1.8.
If an IPv4 is set via a TCP/HTTP set-dst rule, the original port must be
preserved or set to 0 if the previous family was neither AF_INET nor
AF_INET6. The first case is not an issue because the port remains the
same. But if the previous family was, for instance, AF_UNIX, the port is not
set to 0 and have an undefined value.
This patch must be backported as far as 1.7.
Now we don't touch the fd anymore there, instead we rely on the ->drain()
provided by the control layer. As such the function was renamed to
conn_ctrl_drain().
The file proto_tcp.c has become a real mess because it still contains
tons of definitions that have nothing to do with the TCP protocol setup.
This commit moves the ruleset actions "set-src-port", "set-dst-port",
"set-src", "set-dst", and "silent-drop" to a new file "tcp_act.c".
Nothing has changed beyond this.
