In the function stream_int_notify(), when the opposite stream-interface is
blocked because there is no more room into the input buffer, if the flag
CF_WRITE_PARTIAL is set on this buffer, it is unblocked. It is a way to unblock
the reads on the other side because some data was sent.
But it is a problem during the fast-forwarding because only the stream is able
to remove the flag CF_WRITE_PARTIAL. So it is possible to have this flag because
of a previous send while the input buffer of the opposite stream-interface is
now full. In such case, the opposite stream-interface will be woken up for
nothing because its input buffer is full. If the same happens on the opposite
side, we will have a loop consumming all the CPU.
To fix the bug, the opposite side is now only notify if there is some available
room in its input buffer in the function si_cs_send(), so only if some data was
sent.
This patch must be backported to 2.0 and 1.9.
When deciding if we keep an idle connection in the session, check if
the number of connections currently in the session is >= the max allowed,
not >, or we'll keep an extra connection.
This should be backported to 1.9 and 2.0.
Just calling conn_force_unsubscribe() from conn_upgrade_mux_fe() is not
enough, as there may be multiple XPRT involved. Instead, require that
any user of conn_upgrade_mux_fe() unsubscribe itself before calling it.
This should fix upgrading a TCP connection to HTX when using SSL.
This should be backported to 2.0.
The receive limit of an HTX channel must be calculated against the total size of
the HTX message. Otherwise, the buffer may never be seen as full whereas the
receive limit is 0. Indeed, the function channel_htx_full() already takes care
to add a block size to the buffer's reserve (8 bytes). So if the function
channel_htx_recv_limit() also keep a block size free in addition to the buffer's
reserve, it means that at least 2 block size will be kept free but only one will
be taken into account, freezing the stream if the option http-buffer-request is
enabled.
This patch fixes the Github issue #136. It should be backported to 2.0 and
1.9. Thanks jaroslawr (Jarosław Rzeszótko) for his help.
Revert commit fe4abe62c7c5206dff1802f42d17014e198b9141.
The goal was to make sure for health-checks, we would not get sockets in
TIME_WAIT. To do so, we would not call shutdown() if linger_risk is set.
However that is wrong, and that means shutw would never be forwarded to
the server, and thus we could get connection that are never properly closed.
Instead, to fix the original problem as described here :
https://www.mail-archive.com/haproxy@formilux.org/msg34080.html
Just make sure the checks code call cs_shutr() before calling cs_shutw().
If shutr has been called, conn_sock_shutw() will make no attempt to call
shutdown(), as it knows close() will be called.
We should really review and revamp the shutr/shutw code, as described in
github issue #142.
This should be backported to 1.9 and 2.0.
In commit 86eded6c6 ("CLEANUP: tasks: rename task_remove_from_tasklet_list()
to tasklet_remove_*") which consisted in removing the casts between tasks
and tasklet, I was a bit too fast to believe that we only saw tasklets in
this function since process_runnable_tasks() also uses it with tasks under
a cast. So removing the bookkeeping on task_list_size was not appropriate.
Bah, the joy of casts which hide the real thing...
This patch does two things at once to address this mess once for all:
- it restores the decrement of task_list_size when it's a real task,
but moves it to process_runnable_task() since it's the only place
where it's allowed to call it with a task
- it moves the increment there as well and renames
task_insert_into_tasklet_list() to tasklet_insert_into_tasklet_list()
of obvious consistency reasons.
This way the increment/decrement of task_list_size is made at the only
places where the cast is enforced, so it has less risks to be missed.
The comments on top of these functions were updated to reflect that they
are only supposed to be used with tasklets and that the caller is responsible
for keeping task_list_size up to date if it decides to enforce a task there.
Now we don't have to worry anymore about how these functions work outside
of the scheduler, which is better longterm-wise. Thanks to Christopher for
spotting this mistake.
No backport is needed.
In conn_sock_shutw(), avoid calling shutdown() if linger_risk is set. Not
doing so will result in getting sockets in TIME_WAIT for some time.
This is particularly observable with health checks.
This should be backported to 1.9.
The function really only operates on tasklets, its arguments are always
tasklets cast as tasks to match the function's type, to be cast back to
a struct tasklet. Let's rename it to tasklet_remove_from_tasklet_list(),
take a struct tasklet, and get rid of the undesired task casts.
It's really confusing to call it a task because it's a tasklet and used
in places where tasks and tasklets are used together. Let's rename it
to tasklet to remove this confusion.
In the HTX structure, the field <first> is used to know where to (re)start the
analysis. It may differ from the message's head. It is especially important to
update it to handle 1xx messages, to be sure to restart the analysis on the next
message (another 1xx message or the final one). It is also updated when some
data are forwarded (the headers or part of the body). But this update is an
error and must never be done at the analysis level. It is a bug, because some
sample fetches may be used after the data forwarding (but before the first send
of course). At this stage, if the first block position does not point on the
start-line, most of HTTP sample fetches fail.
So now, when something is forwarding by HTX analyzers, the first block position
is not update anymore.
This issue was reported on Github. See #119. No backport needed.
When channel_full() is called for an HTX stream, we fall back on the HTX
version. This function is called, among other, from tcp_inspect_request(). With
this patch, the inspect delay is respected again.
This patch must be backported to 1.9.
With both I/O and tasks in the same tasklet list, we now have a very
smooth and responsive scheduler, providing a good fairness between I/O
activities. With the lower layers relying on tasklet a lot (I/O wakeup,
subscribe, etc), there may often be a large number of totally autonomous
tasklets doing their business such as forwarding data between two muxes.
But the task scheduler historically refrained from picking tasks from the
priority-ordered run queue to put them into the tasklet list until this
later had less than max_runqueue_depth entries. This was to make sure that
low-latency, high-priority tasks would have an opportunity to be dequeued
before others even if they arrive late. But the counter used for this is
still the tasklet list size, which contains countless I/O events. This
causes an unfairness between unbounded I/Os and bounded tasks, resulting
for example in the CLI responding slower when forwarding 40 Gbps of HTTP
traffic spread over a thousand of connections.
A good solution consists in sticking to the initial intent of
max_runqueue_depth which is to limit the number of tasks in the list
(to maintain fairness between them) and not to limit the number of these
tasks among tasklets. It just turns out that the task_list_size initially
was this task counter and changed over time to be a tasklet list size.
Let's simply refrain from updating it for pure tasklets so that it takes
back its original role of counting real tasks as its name implies. With
this change the CLI becomes instantly responsive under load again.
This patch may possibly be backported to 1.9 though it requires some
careful checks.
Just like we have a synchronous recv() function for the stream interface,
let's have a synchronous send function that we'll be able to call from
different places. For now this only moves the code, nothing more.
We should not update the two directions at once, in fact we should update
the Rx path after recv() and the Tx path after send(). Let's start by
splitting the update function in two for this.
The purpose of making idle-conns switch to SI_ST_CON was to make the
transition detectable and the operation retryable in case of connection
error. Now we have the RDY state for this which is much more suitable
since it indicates a validated connection on which we didn't necessarily
send anything yet. This will still lead to a transition to EST while not
requiring unnatural write polling nor connect timeouts.
The main reason for all the trouble we're facing with stream interface
error or timeout reports during the connection phase is that we currently
can't make the difference between a connection attempt and a validated
connection attempt. It is problematic because we tend to switch early
to SI_ST_EST but can't always do what we want in this state since it's
supposed to be set when we don't need to visit sess_establish() again.
This patch introduces a new state betwen SI_ST_CON and SI_ST_EST, which
is SI_ST_RDY. It indicates that we've verified that the connection is
ready. It's a transient state, like SI_ST_DIS, that cannot persist when
leaving process_stream(). For now it is not set, only verified in various
tests where SI_ST_CON was used or SI_ST_EST depending on the cases.
The stream-int state diagram was minimally updated to reflect the new
state, though it is largely obsolete and would need to be seriously
updated.
The stream interface state checks involving ranges were replaced with
checks on a set of states, already revealing some issues. No issue was
fixed, all was replaced in a one-to-one mapping for easier control. Some
checks involving a strict difference were also replaced with fields to
be clearer. At this stage, the result must be strictly equivalent. A few
tests were also turned to their bit-field equivalent for better readability
or in preparation for upcoming changes.
The test performed in the SPOE filter was swapped so that the closed and
error states are evicted first and that the established vs conn state is
tested second.
At some places we do check for ranges of stream-int states but those
are confusing as states ordering is not well known (e.g. it's not obvious
that CER is between CON and EST). Let's create a bit field from states so
that we can match multiple states at once instead. The new enum si_state_bit
contains SI_SB_* which are state bits instead of state values. The function
si_state_in() indicates if the state in argument is one of those represented
by the bit mask in second argument.
Now that the various handshakes come with their own XPRT, there's no
need for the CONN_FL_SOCK* flags, and the conn_sock_want|stop functions,
so garbage-collect them.
Add a new XPRT that is used when using non-SSL handshakes, such as proxy
protocol or Netscaler, instead of taking care of it in conn_fd_handler().
This XPRT is installed when any of those is used, and it removes itself once
the handshake is done.
This should allow us to remove the distinction between CO_FL_SOCK* and
CO_FL_XPRT*.
In channel_htx_forward() and channel_htx_forward_forever(), if the HTX message
is empty, the underlying buffer may be really empty too. And we have no warranty
the caller will call htx_to_buf() later. And in practice, it is almost never
done. So the channel's buffer must not be altered. Otherwise, the buffer may be
considered as full (data == size) for an empty HTX message and no outgoing data.
This patch must be backported to 1.9.
Make usage of the APIs implemented for dictionaries (dict.c) and their LRU caches (struct dcache)
so that to send/receive server names used for the server by name stickiness. These
names are sent over the network as follows:
- in every case we send the encode length of the data (STD_T_DICT), then
- if the server names is not present in the cache used upon transmission (struct dcache_tx)
we cache it and we the ID of this TX cache entry followed the encode length of the
server name, and finally the sever name itseft (non NULL terminated string).
- if the server name is present, we repead these operations but we only send the TX cache
entry ID.
Upon receipt, the couple of (cache IDs, server name) are stored the LRU cache used
only upon receipt (struct dcache_rx). As the peers protocol is symetrical, the fact
that the server name is present in the received data (resp. or not) denotes if
the entry is absent (resp. or not).
This simple patch only adds definitions to create a new stick-table
data type ID and a new standard type to store information in relation
wich dictionary entries (STD_T_DICT).
This patch adds minimalistic definitions to implement dictionary new data structure
which is an ebtree of ebpt_node structs with strings as keys. Note that this has nothing
to see with real dictionary data structure (maps of keys in association with values).
Have "socks4" and "check-via-socks4" server keyword added.
Implement handshake with SOCKS4 proxy server for tcp stream connection.
See issue #82.
I have the "SOCKS: A protocol for TCP proxy across firewalls" doc found
at "https://www.openssh.com/txt/socks4.protocol". Please reference to it.
[wt: for now connecting to the SOCKS4 proxy over unix sockets is not
supported, and mixing IPv4/IPv6 is discouraged; indeed, the control
layer is unique for a connection and will be used both for connecting
and for target address manipulation. As such it may for example report
incorrect destination addresses in logs if the proxy is reached over
IPv6]
Remove the active_tasks_mask variable, we can deduce if we've work to do
by other means, and it is costly to maintain. Instead, introduce a new
function, thread_has_tasks(), that returns non-zero if there's tasks
scheduled for the thread, zero otherwise.
The functions channel_htx_fwd_payload() and channel_htx_fwd_all() should now be
used to forward, respectively, a part of the HTX payload or all of it. These
functions forward data and update the first block position.
We don't store the start-line position anymore in the HTX message. Instead we
store the first block position to analyze. For now, it is almost the same. But
once all changes will be made on this part, this position will have to be used
by HTX analyzers, and only in the analysis context, to know where the analyse
should start.
When new blocks are added in an HTX message, if the first block position is not
defined, it is set. When the block pointed by it is removed, it is set to the
block following it. -1 remains the value to unset the position. the first block
position is unset when the HTX message is empty. It may also be unset on a
non-empty message, meaning every blocks were already analyzed.
From HTX analyzers point of view, this position is always set during headers
analysis. When they are waiting for a request or a response, if it is unset, it
means the analysis should wait. But once the analysis is started, and as long as
headers are not forwarded, it points to the message start-line.
As mentionned, outside the HTX analysis, no code must rely on the first block
position. So multiplexers and applets must always use the head position to start
a loop on an HTX message.
The function channel_htx_fwd_headers() should now be used by HTX analyzers to
forward all headers of an HTX message, from the start-line to the corresponding
EOH. It takes care to update the star-line position.
When channel_recv_max() is called for an HTX stream, we fall back on the HTX
version. This function is called from si_cs_recv(). This will let us pass the
max amount of bytes to read to HTX multiplexers.
Now, we only return the start-line. If not found, NULL is returned. No lookup is
performed and the HTX message is no more updated. It is now the caller
responsibility to update the position of the start-line to the right value. So
when it is not found, i.e sl_pos is set to -1, it means the last start-line has
been already processed and the next one has not been inserted yet.
It is mandatory to rely on this kind of warranty to store 1xx informational
responses and final reponse in the same HTX message.
It's amazing that the value was still incremented under the date lock,
let's first use an atomic increment for the counter and move it out of
the date lock to reduce contention. These are just counters, we don't
need to take locks if we're not rotating, atomic ops are enough. This
patch does this, and leaves the lock for when the period is over. It's
important to note that some values might be added just before or just
after a rotation but this is not a problem since we don't care if a
value is counted in the previous or next period when it's exactly on
the edge. Great care was taken to ensure that the current counter is
always atomically updated.
Other minor cleanups were performed, such as avoiding to reload the
value from memory after a CAS, or using &~1 instead of two shifts to
remove the lowest bit.
This function dumps a lot of information about a stream into the provided
buffer. It is now used by stream_dump_and_crash() and will be used by the
debugger as well.
The struct mworker_proc is not uniformly freed everywhere, sometimes leading
to leaks of the `id` string (and possibly the other strings).
Introduce a mworker_free_child function instead of duplicating the freeing
logic everywhere to prevent this kind of issues.
This leak was reported in issue #96.
It looks like the leaks have been introduced in commit 9a1ee7ac31c56fd7d881adf2ef4659f336e50c9f,
which is specific to 2.0-dev. Backporting `mworker_free_child` might be
helpful to ease backporting other fixes, though.
Now that we have the guarantee that init calls happen before any other
thread starts, we don't need anymore the workaround installed by commit
1605c7ae6 ("BUG/MEDIUM: threads/mworker: fix a race on startup") and we
can instead rely on a regular per-thread initcall for this function. It
will only be performed on worker thread #0, the other ones and the master
have nothing to do, just like in the original code that was only moved
to the function.
With the thread debugger it becomes visible that we can leave some
wandering pointers for a while in curr_task, which is inappropriate.
This patch addresses this by resetting curr_task to NULL before really
freeing the area. This way it becomes safe even regarding signals.
In conn_xprt_close(), after calling xprt->close(), don't forget to set
conn->xprt_ctx to NULL, or we may attempt to reuse the now-free'd
conn->xprt_ctx if the connection failed and we're retrying it.
It's always a pain to have to stuff lots of #ifdef USE_OPENSSL around
ssl headers, it even results in some of them appearing in a random order
and multiple times just to benefit form an existing ifdef block. Let's
make these headers safe for inclusion when USE_OPENSSL is not defined,
they now perform the test themselves and do nothing if USE_OPENSSL is
not defined. This allows to remove no less than 8 such ifdef blocks
and make include blocks more readable.
