Since commit 81492c989 ("MINOR: threads: flatten the per-thread cpu-map"),
we don't keep the proc*thread matrix anymore to represent the full binding
possibilities, but only the proc and thread ones. The problem is that the
per-process binding is not the same for each thread and for the process,
and the proc[] array was assumed to store the per-proc first thread value
when doing this change. Worse, the logic present there tries to deal with
thread ranges and process ranges in a way which automatically exclused the
other possibility (since ranges cannot be used on both) but as such fails
to apply changes if neither the process nor the thread is expressed as a
range.
The real problem comes from the fact that specifying cpu-map 1/1 doesn't
yet reveal if the per-process mask or the per-thread mask needs to be
updated. In practice it's the thread one but then the current storage
doesn't allow to store the binding of the first thread of each other
process in nbproc>1 configurations.
When removing the proc*thread matrix, what ought to have been kept was
both the thread column for process 1 and the process line for threads 1,
but instead only the thread column was kept. This patch reintroduces the
storage of the configuration for the first thread of each process so that
it is again possible to store either the per-thread or per-process
configuration.
As a partial workaround for existing configurations, it is possible to
systematically indicate at least two processes or two threads at once
and map them by pairs or more so that at least two values are present
in the range. E.g :
# set processes 1-4 to cpus 0-3 :
cpu-map auto:1-4/1 0 1 2 3
# or:
cpu-map 1-2/1 0 1
cpu-map 2-3/1 2 3
# set threads 1-4 to cpus 0-3 :
cpu-map auto:1/1-4 0 1 2 3
# or :
cpu-map 1/1-2 0 1
cpu-map 3/3-4 2 3
This fix must be backported to 2.0.
As reported in GH issue #109 and in discourse issue
https://discourse.haproxy.org/t/haproxy-returns-408-or-504-error-when-timeout-client-value-is-every-25d
the time parser doesn't error on overflows nor underflows. This is a
recurring problem which additionally has the bad taste of taking a long
time before hitting the user.
This patch makes parse_time_err() return special error codes for overflows
and underflows, and adds the control in the call places to report suitable
errors depending on the requested unit. In practice, underflows are almost
never returned as the parsing function takes care of rounding values up,
so this might possibly happen on 64-bit overflows returning exactly zero
after rounding though. It is not really possible to cut the patch into
pieces as it changes the function's API, hence all callers.
Tests were run on about every relevant part (cookie maxlife/maxidle,
server inter, stats timeout, timeout*, cli's set timeout command,
tcp-request/response inspect-delay).
Event ports are kqueue/epoll polling class for Solaris. Code is based
on https://github.com/joyent/haproxy-1.8/tree/joyent/dev-v1.8.8.
Event ports are available only on SunOS systems derived from
Solaris 10 and later (including illumos systems).
When we initially experimented with threads and processes support, we
needed to implement arrays of threads per process for cpu-map, but this
is not needed anymore since we support either threads or processes.
Let's simply make the thread-based cpu-map per thread and not per
thread and per process since that's not used anymore. Doing so reduces
the global struct from 33kB to 1.5kB.
Only -1 and positive integers from 0 to INT_MAX are accepted. An error is
triggered during the config parsing for any other values.
This patch may be backported to all supported versions.
It's always a pain to get a core dump when enabling user/group setting
(which disables the dumpable flag on Linux), when using a chroot and/or
when haproxy is started by a service management tool which requires
complex operations to just raise the core dump limit.
This patch introduces a new "set-dumpable" global directive to work
around these troubles by doing the following :
- remove file size limits (equivalent of ulimit -f unlimited)
- remove core size limits (equivalent of ulimit -c unlimited)
- mark the process dumpable again (equivalent of suid_dumpable=1)
Some of these will depend on the operating system. This way it becomes
much easier to retrieve a core file. Temporarily moving the chroot to
a user-writable place generally enough.
This entry was still set to 2000 but never used anymore. The only places
where it appeared was as an alias to SYSTEM_MAXCONN which forces it, so
let's turn these ones to SYSTEM_MAXCONN and remove the default value for
DEFAULT_MAXCONN. SYSTEM_MAXCONN still defines the upper bound however.
Emeric reports that when MAX_THREADS and/or MAX_PROCS are set to lower
values, referencing thread or process numbers higher than these limits
in cpu-map returns errors. This is annoying because these typically are
silent settings that are expected to be used only when set. Let's switch
back to LONGBITS for this limit.
For some embedded systems, it's pointless to have 32- or even 64- large
arrays of processes when it's known that much fewer processes will be
used in the worst case. Let's introduce this MAX_PROCS define which
contains the highest number of processes allowed to run at once. It
still defaults to LONGBITS but may be lowered.
Since HTX casts the buffer to a struct and stores relative pointers at the
end, it is mandatory that its end is properly aligned. This patch enforces
a buffer size rounding up to the next multiple of two void*, thus 8 on
32-bit and 16 on 64-bit, to match what malloc() already does on the beginning
of the buffer. In pratice it will never be really noticeable since default
sizes already are such multiples.
In some situations, especially when dealing with low latency on processors
supporting a variable frequency or when running inside virtual machines,
each time the process waits for an I/O using the poller, the processor
goes back to sleep or is offered to another VM for a long time, and it
causes excessively high latencies.
A solution to this provided by this patch is to enable busy polling using
a global option. When busy polling is enabled, the pollers never sleep and
loop over themselves waiting for an I/O event to happen or for a timeout
to occur. On multi-processor machines it can significantly overheat the
processor but it usually results in much lower latencies.
A typical test consisting in injecting traffic over a single connection at
a time over the loopback shows a bump from 4640 to 8540 connections per
second on forwarded connections, indicating a latency reduction of 98
microseconds for each connection, and a bump from 12500 to 21250 for
locally terminated connections (redirects), indicating a reduction of
33 microseconds.
It is only usable with epoll and kqueue because select() and poll()'s
API is not convenient for such usages, and the level of performance they
are used in doesn't benefit from this anyway.
The option, which obviously remains disabled by default, can be turned
on using "busy-polling" in the global section, and turned off later
using "no busy-polling". Its status is reported in "show info" to help
troubleshooting suspicious CPU spikes.
The config parser is the largest file to build and its build dominates
the total project's build time. Let's start to split it into multiple
smaller pieces by extracting the "global" section parser into a new
file called "cfgparse-global.c". This removes 1/4th of the file's build
time.
