This new parameter makes it possible to override the default
number of consecutive incoming connections which can be
accepted on a socket. By default it is not limited on single
process mode, and limited to 8 in multi-process mode.
Hello,
You will find attached an updated release of previously submitted patch.
It polish some part and extend ACL engine to match IP and PORT parsed in
HTTP request. (and take care of comments made by Willy ! ;))
Best regards,
Alexandre
Proxy listeners were very special and not very easy to manipulate.
A proto_tcp file has been created with all that is required to
manage TCPv4/TCPv6 as raw protocols, and provide generic listeners.
The code of start_proxies() and maintain_proxies() now looks less
like spaghetti. Also, event_accept will need a serious lifting in
order to use more of the information provided by the listener.
The error path in event_accept() was complicated by many code
duplications. Use the classical unrolling with the gotos. This
fix alone reduced the code by 2.5 kB.
The default_backend did not work in TCP mode since there was no
header state to assign the backend. This causes much trouble when
configs are created by copy-paste.
The solution was to fix the way the backend is assigned upon accept().
A wrong contimeout assignment was fixed too.
In case the incoming socket is set for write and not for read (very
unlikely, except in HEALTH mode), the timeout may remain eternity due
to a copy-paste typo.
The stream_sock_* functions had to know about sessions just in
order to get the server's address for a connect() operation. This
is not desirable, particularly for non-IP protocols (eg: PF_UNIX).
Put a pointer to the peer's sockaddr_storage or sockaddr address
in the fdtab structure so that we never need to look further.
With this small change, the stream_sock.c file is now 100% protocol
independant.
The following patch will give the ability to tweak socket linger mode.
You can use this option with "option nolinger" inside fronted or backend
configuration declaration.
This will help in environments where lots of FIN_WAIT sockets are
encountered.
Some fetches such as 'line' or 'hdr' need to know the direction of
the test (request or response). A new 'dir' parameter is now
propagated from the caller to achieve this.
ACLs now support operators such as 'eq', 'le', 'lt', 'ge' and 'gt'
in order to give more flexibility to the language. Because of this
change, the 'dst_limit' keyword changed to 'dst_conn' and now requires
either a range or a test such as 'dst_conn lt 1000' which is more
understandable.
ETERNITY is not 0 anymore, so all timeouts will not be initialized
to ETERNITY by a simple calloc(). We have to explictly assign them.
This bug caused random session aborts.
The timeout functions were difficult to manipulate because they were
rounding results to the millisecond. Thus, it was difficult to compare
and to check what expired and what did not. Also, the comparison
functions were heavy with multiplies and divides by 1000. Now, all
timeouts are stored in timevals, reducing the number of operations
for updates and leading to cleaner and more efficient code.
The file client.c now provides acl_fetch_dip and acl_fetch_dport
to be able to check the client's destination address and port. The
corresponding ACL keywords 'dst' and 'dport' have been added.
There are multiple places where the client's destination address is
required. Let's store it in the session when needed, and add a flag
to inform that it has been retrieved.
The rbtree-based wait queue consumes a lot of CPU. Use the ul2tree
instead. Lots of cleanups and code reorganizations made it possible
to reduce the task struct and simplify the code a bit.
Now fdtab can contain the FD_POLL_* events so that the pollers
which can fill them can give userful information to readers and
writers about the precise condition of wakeup.
It may be dangerous to play with fdtab before doing fd_insert()
because this last one is responsible for growing maxfd as needed.
Call fd_insert() before instead.
logs are handled better with dedicated functions. The HTTP implementation
moved to proto_http.c. It has been cleaned up a bit. Now a frontend with
option httplog and no log will not call the function anymore.
The fiprm and beprm were added to ease the transition between
a single listener mode to frontends+backends. They are no longer
needed and make the code a bit more complicated. Remove them.
Very recent changes consisting in moving some pointers to the
transaction instead of the session have lead to a bug because
those pointers were only initialized if the protocol was HTTP,
but they were freed based on their value. In some cases, it
was possible to cause double frees.
Some session flags were clearly related to HTTP transactions.
A new 'flags' field has been added to http_txn, and the
associated flags moved to proto_http.h.
Some parts of HTTP processing were incorrectly called "request" while
they are messages or transactions. The following structure members
have changed :
http_msg.hdr_state => msg_state
http_msg.sor => som
http_req.req_state => removed
http_req => http_txn
When a request is invalid during RQ_BEFORE AND the debug mode is active,
the hdr_idx might be used uninitialized. Let's initialize it right after
the accept() for now.
The HTTP parser has been rewritten for better compliance to RFC2616.
The same parser is now usable for both requests and responses, and
it now supports HTTP/0.9 as well as multi-line headers. It has also
been improved for speed ; a typicial HTTP request is parsed in about
2 microseconds on a 1 GHz processor.
The monitor-uri check has been moved so that the requests are not
logged. The httpclose option now tries to change as little as
possible in the request, and does not affect the first header if
it is already set to 'close'. HTTP/0.9 requests are converted to
HTTP/1.0 before being forwarded.
Headers and request transformations are now distinct. The headers
list is updated after each insertion/removal/transformation. The
request is re-parsed and checked after each transformation. It is
not possible anymore to remove a request, and requests which lead
to invalid request lines are now rejected.
A struct http_req has been created to collect every information
related to an HTTP request being processed. Right now, it is
still in the struct session but the frontier is clear now.
This patch from Sin Yu makes use of an rbtree for the wait queue,
which will solve the slowdown problem encountered when timeouts
are heterogenous in the configuration. The next step will be to
turn maintain_proxies() into a per-proxy task so that we won't
have to scan them all after each poll() loop.
HTTP error messages were all specific cases handled by an IF.
Now they are all in an array so that it will be easier to add
new ones. Also, the return functions now use chunks as inputs
so that it should be easier to provide alternative return
messages if needed.
The logs have become a real mess. It is now very hard to tell which
frontend/backend will impose its configuration for the logs. This
needs a complete rework but at least it should work.
The nbconn attribute in the proxies was not relevant anymore because
a frontend A may use backend B and both of them must account for their
respective connections. For this reason, there now are two separate
counters for frontend and backend connections.
The stats page has been updated to reflect the backend, but a separate
line entry for the frontend with error counts would be good.
Note that as of now, beconn may be higher than maxconn, because maxconn
applies to the frontend, while beconn may be increased due to sessions
passed from another frontend.
There was a confusion about the way to find filters and backend
parameters from sessions. The chaining has been changed between
the session and the proxy.
Now, a session knows only two proxies : one frontend (->fe) and
one backend (->be). Each proxy has a link to the proxy providing
filters and to the proxy providing backend parameters (both self
by default).
The captures (cookies and headers) have been attached to the
frontend's filters for now.
The uri_auth and the statistics are attached to the backend's
filters so that the uri can depend on a hostname for instance.
The req_cap, hdr_state, hdr_idx, auth_hdr and req_line have been moved
to a dedicated hreq structure in the session. It makes is easier to
add HTTP-specific fields such as SOR (start of request) and EOF (end
of headers).
It also made it possible to fix two bugs introduced by last commit :
- end of headers not correctly detected
- hdr_idx not freed upon one specific error during session creation
When the backend side will be reworked, it should rely on a similar
structure.
The new parser uses an FSM to strictly follow RFC2616.
Headers are indexed and parsed only once they're all available.
That way, complex regexes make more sense.
HTTP processing is now performed in several phases by calling
multiple functions, making the code cleaner and easier to read.
Note that req[i]pass does not work anymore because it would
require that we mark a header to be ignored. What is really
needed is to have the ability to add an exception to a matching
(match xx except yy).
Several bugs have been fixed in appsession during the conversion
to the new FSM (method length and recovery on malloc errors).
The code does build and work with the debug examples, but is
not usable yet to connect to anything as it does not forward
the requests yet.
