By default we automatically wait for enough data to fill large
packets if buf->to_forward is not null. This causes a problem
with POST/Expect requests which have a data size but no data
immediately available. Instead of causing noticeable delays on
such requests, simply add a flag to disable waiting when sending
requests.
Many times we see a lot of short responses in HTTP (typically 304 on a
reload). It is a waste of network bandwidth to send that many small packets
when we know we can merge them. When we know that another HTTP request is
following a response, we set BF_EXPECT_MORE on the response buffer, which
will turn MSG_MORE on exactly once. That way, multiple short responses can
leave pipelined if their corresponding requests were also pipelined.
This option enables HTTP keep-alive on the client side and close mode
on the server side. This offers the best latency on the slow client
side, and still saves as many resources as possible on the server side
by actively closing connections. Pipelining is supported on both requests
and responses, though there is currently no reason to get pipelined
responses.
This new flag may be set by any user on a stream interface to tell
the underlying protocol that there is no need for lingering on the
socket since we know the other side either received everything or
does not care about what we sent.
This will typically be used with forced server close in HTTP mode,
where we want to quickly close a server connection after receiving
its response. Otherwise the system would prevent us from reusing
the same port for some time.
The body parser will be used in close and keep-alive modes. It follows
the stream to keep in sync with both the request and the response message.
Both chunked transfer-coding and content-length are supported according to
RFC2616.
The multipart/byterange encoding has not yet been implemented and if not
seconded by any of the two other ones, will be forwarded till the close,
as requested by the specification.
Both the request and the response analysers converge into an HTTP_MSG_DONE
state where it will be possible to force a close (option forceclose) or to
restart with a fresh new transaction and maintain keep-alive.
This change is important. All tests are OK but any possible behaviour
change with "option httpclose" might find its root here.
Some wrong operations were performed on buffers, assuming the
offsets were relative to the beginning of the request while they
are relative to the beginning of the buffer. In practice this is
not yet an issue since both are the same... until we add support
for keep-alive.
It's not enough to know if the connection will be in CLOSE or TUNNEL mode,
we still need to know whether we want to read a full message to a known
length or read it till the end just as in TUNNEL mode. Some updates to the
RFC clarify slightly better the corner cases, in particular for the case
where a non-chunked encoding is used last.
Now we also take care of adding a proper "connection: close" to messages
whose size could not be determined.
This state indicates that an HTTP message (request or response) is
complete. This will be used to know when we can re-initialize a
new transaction. Right now we only switch to it after the end of
headers if there is no data. When other analysers are implemented,
we can switch to this state too.
The condition to reuse a connection is when the response finishes
after the request. This will have to be checked when setting the
state.
This code really belongs to the http part since it's transaction-specific.
This will also make it easier to later reinitialize a transaction in order
to support keepalive.
We used to apply a limit to each buffer's size in order to leave
some room to rewrite headers, then we used to remove this limit
once the session switched to a data state.
Proceeding that way becomes a problem with keepalive because we
have to know when to stop reading too much data into the buffer
so that we can leave some room again to process next requests.
The principle we adopt here consists in only relying on to_forward+send_max.
Indeed, both of those data define how many bytes will leave the buffer.
So as long as their sum is larger than maxrewrite, we can safely
fill the buffers. If they are smaller, then we refrain from filling
the buffer. This means that we won't risk to fill buffers when
reading last data chunk followed by a POST request and its contents.
The only impact identified so far is that we must ensure that the
BF_FULL flag is correctly dropped when starting to forward. Right
now this is OK because nobody inflates to_forward without using
buffer_forward().
Up to now, we only had a flag in the session indicating if it had to
work in "connection: close" mode. This is not at all compatible with
keep-alive.
Now we ensure that both sides of a connection act independantly and
only relative to the transaction. The HTTP version of the request
and response is also correctly considered. The connection already
knows several modes :
- tunnel (CONNECT or no option in the config)
- keep-alive (when permitted by configuration)
- server-close (close the server side, not the client)
- close (close both sides)
This change carefully detects all situations to find whether a request
can be fully processed in its mode according to the configuration. Then
the response is also checked and tested to fix corner cases which can
happen with different HTTP versions on both sides (eg: a 1.0 client
asks for explicit keep-alive, and the server responds with 1.1 without
a header).
The mode is selected by a capability elimination algorithm which
automatically focuses on the least capable agent between the client,
the frontend, the backend and the server. This ensures we won't get
undesired situtations where one of the 4 "agents" is not able to
process a transaction.
No "Connection: close" header will be added anymore to HTTP/1.0 requests
or responses since they're already in close mode.
The server-close mode is still not completely implemented. The response
needs to be rewritten as keep-alive before being sent to the client if
the connection was already in server-close (which implies the request
was in keep-alive) and if the response has a content-length or a
transfer-encoding (but only if client supports 1.1).
A later improvement in server-close mode would probably be to detect
some situations where it's interesting to close the response (eg:
redirections with remote locations). But even then, the client might
close by itself.
It's also worth noting that in tunnel mode, no connection header is
affected in either direction. A tunnelled connection should theorically
be notified at the session level, but this is useless since by definition
there will not be any more requests on it. Thus, we don't need to add a
flag into the session right now.
Implement decreasing health based on observing communication between
HAProxy and servers.
Changes in this version 2:
- documentation
- close race between a started check and health analysis event
- don't force fastinter if it is not set
- better names for options
- layer4 support
Changes in this version 3:
- add stats
- port to the current 1.4 tree
In order to support keepalive, we'll have to differentiate
normal sessions from tunnel sessions, which are the ones we
don't want to analyse further.
Those are typically the CONNECT requests where we don't care
about any form of content-length, as well as the requests
which are forwarded on non-close and non-keepalive proxies.
To sum up :
- len : it's now the max number of characters for the value, preventing
garbaged results.
- a new option "prefix" is added, this allows to use dynamic cookie
names (e.g. ASPSESSIONIDXXX).
Previously in the thread, I wanted to use the value found with
"capture cookie" but when i started to update the documentation, I
found this solution quite weird. I've made a small rework to not
depend on "capture cookie".
- There's the posssiblity to define the URL parser mode (path parameters
or query string).
We now set msg->col and msg->sov to the first byte of non-header.
They will be used later when parsing chunks. A new macro was added
to perform size additions on an http_msg in order to limit the risks
of copy-paste in the long term.
During this operation, it appeared that the http_msg struct was not
optimal on 64-bit, so it was re-ordered to fill the holes.
An HTTP message can be decomposed into several sub-states depending
on the transfer-encoding. We'll have to keep these state information
while parsing chunks, so we must extend the values. In order not to
change everything, we'll now consider that anything >= MSG_BODY is
the body, and that the value indicates the precise state. The
MSG_ERROR status which was greater than MSG_BODY was moved for this.
Right now, an HTTP server cannot track a TCP server and vice-versa.
This patch enables proxy tracking without relying on the proxy's mode
(tcp/http/health). It only requires a matching proxy name to exist. The
original function was renamed to findproxy_mode().
It's a pain to enable regparm because ebtree is built in its corner
and does not depend on the rest of the config. This causes no problem
except that if the regparm settings are not exactly similar, then we
can get inconsistent function interfaces and crashes.
One solution realized in this patch consists in externalizing all
compiler settings and changing CONFIG_XXX_REGPARM into CONFIG_REGPARM
so that we ensure that any sub-component uses the same setting. Since
ebtree used a value here and not a boolean, haproxy's config has been
set to use a number too. Both haproxy's core and ebtree currently use
the same copy of the compiler.h file. That way we don't have any issue
anymore when one setting changes somewhere.
All files referencing the previous ebtree code were changed to point
to the new one in the ebtree directory. A makefile variable (EBTREE_DIR)
is also available to use files from another directory.
The ability to build the libebtree library temporarily remains disabled
because it can have an impact on some existing toolchains and does not
appear worth it in the medium term if we add support for multi-criteria
stickiness for instance.
The code part which waits for an HTTP response has been extracted
from the old function. We now have two analysers and the second one
may re-enable the first one when an 1xx response is encountered.
This has been tested and works.
The calls to stream_int_return() that were remaining in the wait
analyser have been converted to stream_int_retnclose().
This patch has 2 goals :
1. I wanted to test the appsession feature with a small PHP code,
using PHPSESSID. The problem is that when PHP gets an unknown session
id, it creates a new one with this ID. So, when sending an unknown
session to PHP, persistance is broken : haproxy won't see any new
cookie in the response and will never attach this session to a
specific server.
This also happens when you restart haproxy : the internal hash becomes
empty and all sessions loose their persistance (load balancing the
requests on all backend servers, creating a new session on each one).
For a user, it's like the service is unusable.
The patch modifies the code to make haproxy also learn the persistance
from the client : if no session is sent from the server, then the
session id found in the client part (using the URI or the client cookie)
is used to associated the server that gave the response.
As it's probably not a feature usable in all cases, I added an option
to enable it (by default it's disabled). The syntax of appsession becomes :
appsession <cookie> len <length> timeout <holdtime> [request-learn]
This helps haproxy repair the persistance (with the risk of losing its
session at the next request, as the user will probably not be load
balanced to the same server the first time).
2. This patch also tries to reduce the memory usage.
Here is a little example to explain the current behaviour :
- Take a Tomcat server where /session.jsp is valid.
- Send a request using a cookie with an unknown value AND a path
parameter with another unknown value :
curl -b "JSESSIONID=12345678901234567890123456789012" http://<haproxy>/session.jsp;jsessionid=00000000000000000000000000000001
(I know, it's unexpected to have a request like that on a live service)
Here, haproxy finds the URI session ID and stores it in its internal
hash (with no server associated). But it also finds the cookie session
ID and stores it again.
- As a result, session.jsp sends a new session ID also stored in the
internal hash, with a server associated.
=> For 1 request, haproxy has stored 3 entries, with only 1 which will be usable
The patch modifies the behaviour to store only 1 entry (maximum).
When processing a GET or HEAD request in close mode, we know we don't
need to read anything anymore on the socket, so we can disable it.
Doing this can save up to 40% of the recv calls, and half of the
epoll_ctl calls.
For this we need a buffer flag indicating that we're not interesting in
reading anymore. Right now, this flag also disables both polled reads.
We might benefit from disabling only speculative reads, but we will need
at least this flag when we want to support keepalive anyway.
Currently we don't disable the flag on completion, but it does not
matter as we close ASAP when performing the shutw().
The fd_list[] used by sepoll was indexed on the fd number and was only
used to store the equivalent of an integer. Changing it to be merged
with fdtab reduces the number of pointer computations, the code size
and some initialization steps. It does not harm other pollers much
either, as only one integer was added to the fdtab array.
Some rarely information are stored in fdtab, making it larger for no
reason (source port ranges, remote address, ...). Such information
lie there because the checks can't find them anywhere else. The goal
will be to move these information to the stream interface once the
checks make use of it.
For now, we move them to an fdinfo array. This simple change might
have improved the cache hit ratio a little bit because a 0.5% of
performance increase has measured.
This can ensure that data is readily available on a socket when
we accept it, but a bug in the kernel ignores the timeout so the
socket can remain pending as long as the client does not talk.
Use with care.
This alone makes a typical HTML stats dump consume 10% CPU less,
because we avoid doing complex printf calls to drop them later.
Only a few common cases have been checked, those which are very
likely to run for nothing.
It is a bit expensive and complex to use to call buffer_feed()
directly from the request parser, and there are risks that some
output messages are lost in case of buffer full. Since most of
these messages are static, let's have a state dedicated to print
these messages and store them in a specific area shared with the
stats in the session. This both reduces code size and risks of
losing output data.
Capture & display more data from health checks, like
strerror(errno) for L4 failed checks or a first line
from a response for L7 successes/failed checks.
Non ascii or control characters are masked with
chunk_htmlencode() (html stats) or chunk_asciiencode() (logs).
Add two functions to encode input chunk replacing
non-printable, non ascii or special characters
with:
"&#%u;" - chunk_htmlencode
"<%02X>" - chunk_asciiencode
Above functions should be used when adding strings, received
from possible unsafe sources, to html stats or logs.
int get_backend_server(const char *bk_name, const char *sv_name,
struct proxy **bk, struct server **sv);
This function scans the list of backends and servers to retrieve the first
backend and the first server with the given names, and sets them in both
parameters. It returns zero if either is not found, or non-zero and sets
the ones it did not found to NULL. If a NULL pointer is passed for the
backend, only the pointer to the server will be updated.
The stats socket can now run at 3 different levels :
- user
- operator (default one)
- admin
These levels are used to restrict access to some information
and commands. Only the admin can clear all stats. A user cannot
clear anything nor access sensible data such as sessions or
errors.
Consistent hashing provides some interesting advantages over common
hashing. It avoids full redistribution in case of a server failure,
or when expanding the farm. This has a cost however, the hashing is
far from being perfect, as we associate a server to a request by
searching the server with the closest key in a tree. Since servers
appear multiple times based on their weights, it is recommended to
use weights larger than approximately 10-20 in order to smoothen
the distribution a bit.
In some cases, playing with weights will be the only solution to
make a server appear more often and increase chances of being picked,
so stats are very important with consistent hashing.
In order to indicate the type of hashing, use :
hash-type map-based (default, old one)
hash-type consistent (new one)
Consistent hashing can make sense in a cache farm, in order not
to redistribute everyone when a cache changes state. It could also
probably be used for long sessions such as terminal sessions, though
that has not be attempted yet.
More details on this method of hashing here :
http://www.spiteful.com/2008/03/17/programmers-toolbox-part-3-consistent-hashing/
Recent "struct chunk rework" introduced a NULL pointer dereference
and now haproxy segfaults if auth is required for stats but not found.
The reason is that size_t cannot store negative values, but current
code assumes that "len < 0" == uninitialized.
This patch fixes it.
There are a few remaining max values that need to move to counters.
Also, the counters are more often used than some config information,
so get them closer to the other useful struct members for better cache
efficiency.
Until now it was required that every custom ID was above 1000 in order to
avoid conflicts. Now we have the list of all assigned IDs and can automatically
pick the first unused one. This means that it is perfectly possible to interleave
automatic IDs with persistent IDs and the parser will automatically allocate
unused values starting with 1.
This patch allows to collect & provide separate statistics for each socket.
It can be very useful if you would like to distinguish between traffic
generate by local and remote users or between different types of remote
clients (peerings, domestic, foreign).
Currently no "Session rate" is supported, but adding it should be possible
if we found it useful.
Doing this, we can remove the last BF_HIJACK user and remove
produce_content(). s->data_source could also be removed but
it is currently used to detect if the stats or a server was
used.
The stats handler used to store internal states in s->ana_state. Now
we only rely on si->st0 in which we can store as many states as we
have possible outputs. This cleans up the stats code a lot and makes
it more maintainable. It has also reduced code size by a few hundred
bytes.
We can simplify the code in the stats functions using buffer_feed_chunk()
instead of buffer_write_chunk(). Let's start with this function. This
patch also fixed an issue where we could dump past the end of the capture
buffer if it is shorter than the captured request.
Calling buffer_shutw() marks the buffer as closed but if it was already
closed in the other direction, the stream interface is not marked as
closed, causing infinite loops.
We took this opportunity to completely remove buffer_shutw() and buffer_shutr()
which have no reason to be used at all and which will always cause trouble
when directly called. The stats occurrence was the last one.
By default, when data is sent over a socket, both the write timeout and the
read timeout for that socket are refreshed, because we consider that there is
activity on that socket, and we have no other means of guessing if we should
receive data or not.
While this default behaviour is desirable for almost all applications, there
exists a situation where it is desirable to disable it, and only refresh the
read timeout if there are incoming data. This happens on sessions with large
timeouts and low amounts of exchanged data such as telnet session. If the
server suddenly disappears, the output data accumulates in the system's
socket buffers, both timeouts are correctly refreshed, and there is no way
to know the server does not receive them, so we don't timeout. However, when
the underlying protocol always echoes sent data, it would be enough by itself
to detect the issue using the read timeout. Note that this problem does not
happen with more verbose protocols because data won't accumulate long in the
socket buffers.
When this option is set on the frontend, it will disable read timeout updates
on data sent to the client. There probably is little use of this case. When
the option is set on the backend, it will disable read timeout updates on
data sent to the server. Doing so will typically break large HTTP posts from
slow lines, so use it with caution.
The "static-rr" is just the old round-robin algorithm. It is still
in use when a hash algorithm is used and the data to hash is not
present, but it was impossible to configure it explicitly. This one
is cheaper in terms of CPU and supports unlimited numbers of servers,
so it makes sense to be able to use it.
LB algo macros were composed of the LB algo by itself without any indication
of the method to use to look up a server (the lb function itself). This
method was implied by the LB algo, which was not very convenient to add
more algorithms. Now we have several fields in the LB macros, some to
describe what to look for in the requests, some to describe how to transform
that (kind of algo) and some to describe what lookup function to use.
The next patch will make it possible to factor out some code for all algos
which rely on a map.
The lbprm structure has moved to backend.h, where it should be, and
all algo-specific types and declarations have moved to their specific
files. The proxy struct is now much more readable.
This patch implements "description" (proxy and global) and "node" (global)
options, removes "node-name" and adds "show-node" & "show-desc" options
for "stats". It also changes the way the header lines (with proxy name) and
the statistics are displayed, so stats no longer look so clumsy with very
long names.
Instead of "node-name" it is possible to use show-node/show-desc with
an optional parameter that overrides a default node/description.
backend cust-0045
# report specific values for this customer
stats show-node Europe
stats show-desc Master node for Europe, Asia, Africa
We need to remove hash map accesses out of backend.c if we want to
later support new hash methods. This patch separates the hash computation
method from the server lookup. It leaves the lookup function to lb_map.c
and calls it with the result of the hash.
It was becoming painful to have all the LB algos in backend.c.
Let's move them to their own files. A few hashing functions still
need be broken in two parts, one for the contents and one for the
map position.
This patch adds health logging so it possible to check what
was happening before a crash. Failed healt checks are logged if
server is UP and succeeded healt checks if server is DOWN,
so the amount of additional information is limited.
I also reworked the code a little:
- check_status_description[] and check_status_info[] is now
joined into check_statuses[]
- set_server_check_status updates not only s->check_status and
s->check_duration but also s->result making the code simpler
Changes in v3:
- for now calculate and use local versions of health/rise/fall/state,
it is a slow path, no harm should be done. One day we may centralize
processing of the checks and remove the duplicated code.
- also log checks that are restoring current state
- use "conditionally succeeded" for 404 with disable-on-404
There is no reason to inline functions which are used to grab a server
depending on an LB algo. They are large and used at several places.
Uninlining them saves 400 bytes of code.
We can get rid of the stats analyser by moving all the stats code
to a stream interface applet. Above being cleaner, it provides new
advantages such as the ability to process requests and responses
from the same function and work only with simple state machines.
There's no need for any hijack hack anymore.
The direct advantage for the user are the interactive mode and the
ability to chain several commands delimited by a semi-colon. Now if
the user types "prompt", he gets a prompt from which he can send
as many requests as he wants. All outputs are terminated by a
blank line followed by a new prompt, so this can be used from
external tools too.
The code is not very clean, it needs some rework, but some part
of the dirty parts are due to the remnants of the hijack mode used
in the old functions we call.
The old AN_REQ_STATS_SOCK analyser flag is now unused and has been
removed.
iohandlers will need to store some form of context and for this will
need a way to find their call context. We add the ->private as well
as ->st0 and ->st1 for that purpose. Most likely ->private will be
initialized to the current session and ->st0 and ->st1 will be used
to maintain any form of internal state between calls.
It will soon be necessary to have stream interfaces running as part of
the current task, or as independant tasks. For instance when we want to
implement compression or SSL. It will also be used for applets running
as stream interfaces.
These new functions are used to perform exactly that. Note that it's
still not easy to write a simple echo applet and more functions will
likely be needed.
When stream interfaces will embedded applets running as part as their
holding task, we'll need a new callback to process them from the
session processor.
We had to add a new stream_interface flag : SI_FL_DONT_WAKE. This flag
is used to indicate that a stream interface is being updated and that
no wake up should be sent to its owner. This will be required for tasks
embedded into stream interfaces. Otherwise, we could have the
owner task send wakeups to itself during status updates, thus
preventing the state from converging. As long as a stream_interface's
status is being monitored and adjusted, there is no reason to wake it
up again, as we know its changes will be seen and considered.
Those two functions did not correctly deal with full buffers and/or
buffers that wrapped around. Buffer_skip() was even able to incorrectly
set buf->w further than the end of buffer if its len argument was wrong,
and buffer_si_getline() was able to incorrectly return a length larger
than the effective buffer data available.
It's important that these functions set these flags themselves, otherwise
the callers will always have to do this, and there is no valid reason for
not doing it.
Collect information about last health check result,
including L7 code if possible (for example http or smtp
return code) and time took to finish last check.
Health check info is provided on both stats pages (html & csv)
and logged when a server is marked UP or DOWN. Currently active
check are marked with an asterisk, but only in html mode.
Currently there are 14 status codes:
UNK -> unknown
INI -> initializing
SOCKERR -> socket error
L4OK -> check passed on layer 4, no upper layers testing enabled
L4TOUT -> layer 1-4 timeout
L4CON -> layer 1-4 connection problem, for example "Connection refused"
(tcp rst) or "No route to host" (icmp)
L6OK -> check passed on layer 6
L6TOUT -> layer 6 (SSL) timeout
L6RSP -> layer 6 invalid response - protocol error
L7OK -> check passed on layer 7
L7OKC -> check conditionally passed on layer 7, for example
404 with disable-on-404
L7TOUT -> layer 7 (HTTP/SMTP) timeout
L7RSP -> layer 7 invalid response - protocol error
L7STS -> layer 7 response error, for example HTTP 5xx
In TCP, we don't want to forward chunks of data, we want to forward
indefinitely. This patch introduces a special value for the amount
of data to be forwarded. When buffer_forward() is called with
BUF_INFINITE_FORWARD, it configures the buffer to never stop
forwarding until the end.
The BF_EMPTY flag was once used to indicate an empty buffer. However,
it was used half the time as meaning the buffer is empty for the reader,
and half the time as meaning there is nothing left to send.
"nothing to send" is only indicated by "->send_max=0 && !pipe". Once
we fix this, we discover that the flag is not used anymore. So the
flags has been renamed BF_OUT_EMPTY and means exactly the condition
above, ie, there is nothing to send.
Doing so has allowed us to remove some unused tests for emptiness,
but also to uncover a certain amount of situations where the flag
was not correctly set or tested.
The BF_WRITE_ENA buffer flag became very complex to deal with, because
it was used to :
- enable automatic connection
- enable close forwarding
- enable data forwarding
The last point was not very true anymore since we introduced ->send_max,
but still the test remained everywhere. This was causing issues such as
impossibility to connect without forwarding data, impossibility to prevent
closing when data was forwarded, etc...
This patch clarifies the situation by getting rid of this multi-purpose
flag and replacing it with :
- data forwarding based only on ->send_max || ->pipe ;
- a new BF_AUTO_CONNECT flag to allow automatic connection and only
that ;
- ability to perform an automatic connection when ->send_max or ->pipe
indicate that data is waiting to leave the buffer ;
- a new BF_AUTO_CLOSE flag to let the producer automatically set the
BF_SHUTW_NOW flag when it gets a BF_SHUTR.
During this cleanup, it was discovered that some tests were performed
twice, or that the BF_HIJACK flag was still tested, which is not needed
anymore since ->send_max replcaed it. These places have been fixed too.
These cleanups have also revealed a few areas where the other flags
such as BF_EMPTY are not cleanly used. This will be an opportunity for
a second patch.
By inlining this function and slightly reordering it, we can double
the getchar/putchar test throughput, and reduce its footprint by about
40 bytes. Also, it was the only non-inlined char-based function, which
now makes it more consistent this time.
This function is used to cut the "tail" of a buffer, which means strip it
to the length of unsent data only, and kill any remaining unsent data. Any
scheduled forwarding is stopped. This is mainly to be used to send error
messages after existing data. It does the same as buffer_erase() for buffers
without pending outgoing data.
The computations in buffer_forward() were only valid if buffer_forward()
was used on a buffer which had no more data scheduled for forwarding.
This is always the case right now so this bug is not yet triggered but
it will soon be. Now we correctly discount the bytes to be forwarded
from the data already present in the buffer.
This function works like a traditional putchar() except that it
can return 0 if the output buffer is full.
Now a basic character-based echo function would look like this, from
a stream interface :
while (1) {
c = buffer_si_peekchar(req);
if (c < 0)
break;
if (!buffer_si_putchar(res, c)) {
si->flags |= SI_FL_WAIT_ROOM;
break;
}
buffer_skip(req, 1);
req->flags |= BF_WRITE_PARTIAL;
res->flags |= BF_READ_PARTIAL;
}
The buffer_si_peekline() function is sort of a fgets() to be used from a
stream interface. It returns a complete line whenever possible, and does
not update the buffer's pointer, so that the reader is free to consume
what it wants to.
buffer_si_peekchar() only returns one character, and also needs a call
to buffer_skip() once the character is definitely consumed.
This functions act like their buffer_write*() counter-parts,
except that they're specifically designed to be used from a
stream interface handler, as they carefully check size limits
and automatically advance the read pointer depending on the
to_forward attribute.
buffer_feed_chunk() is an inline calling buffer_feed() as both
are the sames. For this reason, buffer_write_chunk() has also
been turned into an inline which calls buffer_write().
buffer_contig_space(), buffer_contig_data() and buffer_skip()
provide easy methods to extract/insert data from/into a buffer.
buffer_write() and buffer_write_chunk() currently do not check
max_len nor to_forward, so they will quickly become embarrassing
to use or will need an equivalent. The reason is that they are
used to build error messages which currently are not subject to
analysis.
This flag was incorrectly used as meaning "close immediately",
while it needs to say "close ASAP". ASAP here means when unsent
data pending in the buffer are sent. This helps cleaning up some
dirty tricks where the buffer output was checking the BF_SHUTR
flag combined with EMPTY and other such things. Now we have a
clearly defined semantics :
- producer sets SHUTR and *may* set SHUTW_NOW if WRITE_ENA is
set, otherwise leave it to the session processor to set it.
- consumer only checks SHUTW_NOW to decide whether or not to
call shutw().
This also induced very minor changes at some locations which were
not protected against buffer changes while the SHUTW_NOW flag was
set. Now we prevent send_max from changing when the flag is set.
Several tests have been run without any unexpected behaviour detected.
Some more cleanups are needed, as it clearly appears that some tests
could be removed with stricter semantics.
send() supports the MSG_MORE flag on Linux, which does the same
as TCP_CORK except that we don't have to remove TCP_NODELAY before
and we don't need any syscall to set/remove it. This can save up
to 4 syscalls around a send() (two for setting it, two for removing
it), and it's much cleaner since it is not persistent. So make use
of it instead.
We used to call stream_sock_data_finish() directly at the end of
a session update, but if we want to support non-socket interfaces,
we need to have this function configurable. Now we access it via
->update().
The new tune.bufsize and tune.maxrewrite global directives allow one to
change the buffer size and the maxrewrite size. Right now, setting bufsize
too low will block stats sockets which will not be able to write at all.
An error checking must be added to buffer_write_chunk() so that if it
cannot write its message to an empty buffer, it causes the caller to abort.
The first step towards dynamic buffer size consists in removing
all static definitions of the buffer size. Instead, we store a
buffer's size in itself. Right now they're all preinitialized
to BUFSIZE, but we will change that.
sess_establish() used to resort to protocol-specific guesses
in order to set rep->analysers. This is no longer needed as it
gets set from the frontend and the backend as a copy of what
was defined in the configuration.
Analyser bitmaps are now stored in the frontend and backend, and
combined at configuration time. That way, set_session_backend()
does not need to perform any protocol-specific combinations.
Since the listener is the one indicating what analyser and session
handlers to call, it makes sense that it also sets the task's nice
value. This also helps getting rid of the last trace of the stats
in the proto_uxst file.
The remains of the stats socket code has nothing to do in proto_uxst
anymore and must move to dumpstats. The code is much cleaner and more
structured. It was also an opportunity to rename AN_REQ_UNIX_STATS
as AN_REQ_STATS_SOCK as the stats socket is no longer unix-specific
either.
The last item refering to stats in proto_uxst is the setting of the
task's nice value which should in fact come from the listener.
process_session() is now ready to handle unix stats sockets. This
first step works and old code has not been removed. A cleanup is
required. The stats handler is not unix socket-centric anymore and
should move to dumpstats.c.
Creating a frontend for the global stats socket will help merge
unix sockets management with the other socket management. Since
frontends are huge structs, we only allocate it if required.
The connection establishment was completely handled by backend.c which
normally just handles LB algos. Since it's purely TCP, it must move to
proto_tcp.c. Also, instead of calling it directly, we now call it via
the stream interface, which will later help us unify session handling.
This Linux-specific option was never really used in production and
has since been superseded by new splicing options brought by recent
Linux kernels.
It caused several particular cases in the code because the kernel
would take care of the session without haproxy being able to do
anything on it, which became hard to handle in the new architecture.
Let's simply get rid of it now that there is a replacement available.
The new "node-name" stats setting enables reporting of a node ID on
the stats page. It is possible to return the system's host name as
well as a specific name.
The new statement "persist rdp-cookie" enables RDP cookie
persistence. The RDP cookie is then extracted from the RDP
protocol, and compared against available servers. If a server
matches the RDP cookie, then it gets the connection.
This patch adds support for hashing RDP cookies in order to
use them as a load-balancing key. The new "rdp-cookie(name)"
load-balancing metric has to be used for this. It is still
mandatory to wait for an RDP cookie in the frontend, otherwise
it will randomly work.
The RDP protocol is quite simple and documented, which permits
an easy detection and extraction of cookies. It can be useful
to match the MSTS cookie which can contain the username specified
by the client.
This patch propagates the ACL conditions' "requires" bitfield
to the proxies. This makes it possible to know exactly what a
proxy might have to support for any request, which helps knowing
whether we have to allocate some space for certain types of
structures or not (eg: the hdr_idx struct).
The concept might be extended to a lot more types of information,
such as detecting whether we need to allocate some space for some
request ACLs which need a result in the response, etc...
The HTTP processing has been splitted into 7 steps, one of which
is not anymore HTTP-specific (content-switching). That way, it
becomes possible to use "use_backend" rules in TCP mode. A new
"use_server" directive should follow soon.
Some stream analysers might become generic enough to be called
for several bits. So we cannot have the analyser bit hard coded
into the analyser itself. Let's make the caller inform the callee.
We want to split several steps in HTTP processing so that
we can call individual analysers depending on what processing
we want to perform. The first step consists in splitting the
part that waits for a request from the rest.
The splice code did not consider compatibility between both ends
of the connection. Now we set different capabilities on each
stream interface, depending on what the protocol can splice to/from.
Right now, only TCP is supported. Thanks to this, we're now able to
automatically detect when splice() is not implemented and automatically
disable it on one end instead of reporting errors to the upper layer.
When the nolinger option is used, we must not close too fast because
some data might be left unsent. Instead we must proceed with a normal
shutdown first, then a close. Also, we want to avoid merging FIN with
the last segment if nolinger is set, because if that one gets lost,
there is no chance for it to be retransmitted.
We now support up to 10 distinct configuration files. They are
all loaded in the order defined by -f <file1> -f <file2> ...
This can be useful in order to store global, private, public,
etc... configurations in distinct files.
This is a first step towards support of multiple configuration files.
Now readcfgfile() only reads a file in memory and performs very minimal
parsing. The checks are performed afterwards.
Sometimes it can be useful to limit the advertised TCP MSS on
incoming connections, for instance when requests come through
a VPN or when the system is running with jumbo frames enabled.
Passing the "mss <value>" arguments to a "bind" line will set
the value. This works under Linux >= 2.6.28, and maybe a few
earlier ones, though due to an old kernel bug most of earlier
versions will probably ignore it. It is also possible that some
other OSes will support this.
This new option enables combining of request buffer data with
the initial ACK of an outgoing TCP connection. Doing so saves
one packet per connection which is quite noticeable on workloads
mostly consisting in small objects. The option is not enabled by
default.
Setting TCP_CORK on a socket before sending the last segment enables
automatic merging of this segment with the FIN from the shutdown()
call. Playing with TCP_CORK is not easy though as we have to track
the status of the TCP_NODELAY flag since both are mutually exclusive.
Doing so saves one more packet per session and offers about 5% more
performance.
There is no reason not to do it, so there is no associated option.
This option disables TCP quick ack upon accept. It is also
automatically enabled in HTTP mode, unless the option is
explicitly disabled with "no option tcp-smart-accept".
This saves one packet per connection which can bring reasonable
amounts of bandwidth for servers processing small requests.
Sometimes we would want to implement implicit default options,
but for this we need to be able to disable them, which requires
to keep track of "no option" settings. With this change, an option
explicitly disabled in a defaults section will still be seen as
explicitly disabled. There should be no regression as nothing makes
use of this yet.
Some users are already hitting the 64k source port limit when
connecting to servers. The system usually maintains a list of
unused source ports, regardless of the source IP they're bound
to. So in order to go beyond the 64k concurrent connections, we
have to manage the source ip:port lists ourselves.
The solution consists in assigning a source port range to each
server and use a free port in that range when connecting to that
server, either for a proxied connection or for a health check.
The port must then be put back into the server's range when the
connection is closed.
This mechanism is used only when a port range is specified on
a server. It makes it possible to reach 64k connections per
server, possibly all from the same IP address. Right now it
should be more than enough even for huge deployments.
Some users want to keep the max sessions/s seen on servers, frontends
and backends for capacity planning. It's easy to grab it while the
session count is updated, so let's keep it.
Some people are using haproxy in a shared environment where the
system logger by default sends alert and emerg messages to all
consoles, which happens when all servers go down on a backend for
instance. These people can not always change the system configuration
and would like to limit the outgoing messages level in order not to
disturb the local users.
The addition of an optional 4th field on the "log" line permits
exactly this. The minimal log level ensures that all outgoing logs
will have at least this level. So the logs are not filtered out,
just set to this level.
There is a patch made by me that allow for balancing on any http header
field.
[WT:
made minor changes:
- turned 'balance header name' into 'balance hdr(name)' to match more
closely the ACL syntax for easier future convergence
- renamed the proxy structure fields header_* => hh_*
- made it possible to use the domain name reduction to any header, not
only "host" since it makes sense to do it with other ones.
Otherwise patch looks good.
/WT]
Some big traffic sites have trouble dealing with logs and tend to
disable them. Here are two new options to help cope with massive
logs.
- dontlog-normal only disables logging for 100% successful
connections, other ones will still be logged
- log-separate-errors will cause non-100% successful connections
to be logged at level "err" instead of level "info" so that a
properly configured syslog daemon can send them to a different
file for longer conservation.
These functions will be used to deliver asynchronous signals in order
to make the signal handling functions more robust. The goal is to keep
the same interface to signal handlers.
I have attached a patch which will add on every http request a new
header 'X-Original-To'. If you have HAProxy running in transparent mode
with a big number of SQUID servers behind it, it is very nice to have
the original destination ip as a common header to make decisions based
on it.
The whole thing is configurable with a new option 'originalto'. I have
updated the sourcecode as well as the documentation. The 'haproxy-en.txt'
and 'haproxy-fr.txt' files are untouched, due to lack of my french
language knowledge. ;)
Also the patch adds this header for IPv4 only. I haven't any IPv6 test
environment running here and don't know if getsockopt() with SO_ORIGINAL_DST
will work on IPv6. If someone knows it and wants to test it I can modify
the diff. Feel free to ask me questions or things which should be changed. :)
--Maik
The byte counters have long been 64-bit to avoid overflows. But with
several sites nowadays, we see session counters wrap around every 10-days
or so. So it was the moment to switch counters to 64-bit, including
error and warning counters which can theorically rise as fast as session
counters even if in practice there is very low risk.
The performance impact should not be noticeable since those counters are
only updated once per session. The stats output have been carefully checked
for proper types on both 32- and 64-bit platforms.
It's useful to be able to accept an invalid header name in a request
or response but still be able to monitor further such errors. Now,
when an invalid request/response is received and accepted due to
an "accept-invalid-http-{request|response}" option, the invalid
request will be captured for later analysis with "show errors" on
the stats socket.
Sometimes it is required to let invalid requests pass because
applications sometimes take time to be fixed and other servers
do not care. Thus we provide two new options :
option accept-invalid-http-request (for the frontend)
option accept-invalid-http-response (for the backend)
When those options are set, invalid requests or responses do
not cause a 403/502 error to be generated.
This function sets CSS letter spacing after each 3rd digit. The page must
create a class "rls" (right letter spacing) with style "letter-spacing: 0.3em"
in order to use it.
When the reader does not expect to read lots of data, it can
set BF_READ_DONTWAIT on the request buffer. When it is set,
the stream_sock_read callback will not try to perform multiple
reads, it will return after only one, and clear the flag.
That way, we can immediately return when waiting for an HTTP
request without trying to read again.
On pure request/responses schemes such as monitor-uri or
redirects, this has completely eliminated the EAGAIN occurrences
and the epoll_ctl() calls, resulting in a performance increase of
about 10%. Similar effects should be observed once we support
HTTP keep-alive since we'll immediately disable reads once we
get a full request.
If we get very large data at once, it's almost certain that it's
worthless trying to read again, because we got everything we could
get.
Doing this has made all -EAGAIN disappear from splice reads. The
threshold has been put in the global tunable structures so that if
we one day want to make it accessible from user config, it will be
easy to do so.
It's sometimes useful at least for statistics to keep a task count.
It's easy to do by forcing the rare task creators to always use the
same functions to create/destroy a task.
The top of a duplicate tree is not where bit == -1 but at the most
negative bit. This was causing tasks to be queued in reverse order
within duplicates. While this is not dramatic, it's incorrect and
might lead to longer than expected duplicate depths under some
circumstances.
Since we're now able to search from a precise expiration date in
the timer tree using ebtree 4.1, we don't need to maintain 4 trees
anymore. Not only does this simplify the code a lot, but it also
ensures that we can always look 24 days back and ahead, which
doubles the ability of the previous scheduler. Indeed, while based
on absolute values, the timer tree is now relative to <now> as we
can always search from <now>-31 bits.
The run queue uses the exact same principle now, and is now simpler
and a bit faster to process. With these changes alone, an overall
0.5% performance gain was observed.
Tests were performed on the few wrapping cases and everything works
as expected.
