There's no point splitting the file in two since only cfgparse uses the
types defined there. A few call places were updated and cleaned up. All
of them were in C files which register keywords.
There is nothing left in common/ now so this directory must not be used
anymore.
This one was not easy because it was embarking many includes with it,
which other files would automatically find. At least global.h, arg.h
and tools.h were identified. 93 total locations were identified, 8
additional includes had to be added.
In the rare files where it was possible to finalize the sorting of
includes by adjusting only one or two extra lines, it was done. But
all files would need to be rechecked and cleaned up now.
It was the last set of files in types/ and proto/ and these directories
must not be reused anymore.
extern struct dict server_name_dict was moved from the type file to the
main file. A handful of inlined functions were moved at the bottom of
the file. Call places were updated to use server-t.h when relevant, or
to simply drop the entry when not needed.
The files remained mostly unchanged since they were OK. However, half of
the users didn't need to include them, and about as many actually needed
to have it and used to find functions like srv_currently_usable() through
a long chain that broke when moving the file.
This one is particularly difficult to split because it provides all the
functions used to manipulate a proxy state and to retrieve names or IDs
for error reporting, and as such, it was included in 73 files (down to
68 after cleanup). It would deserve a small cleanup though the cut points
are not obvious at the moment given the number of structs involved in
the struct proxy itself.
The current state of the logging is a real mess. The main problem is
that almost all files include log.h just in order to have access to
the alert/warning functions like ha_alert() etc, and don't care about
logs. But log.h also deals with real logging as well as log-format and
depends on stream.h and various other things. As such it forces a few
heavy files like stream.h to be loaded early and to hide missing
dependencies depending where it's loaded. Among the missing ones is
syslog.h which was often automatically included resulting in no less
than 3 users missing it.
Among 76 users, only 5 could be removed, and probably 70 don't need the
full set of dependencies.
A good approach would consist in splitting that file in 3 parts:
- one for error output ("errors" ?).
- one for log_format processing
- and one for actual logging.
It was moved without any change, however many callers didn't need it at
all. This was a consequence of the split of proto_http.c into several
parts that resulted in many locations to still reference it.
Almost no change except moving the cli_kw struct definition after the
defines. Almost all users had both types&proto included, which is not
surprizing since this code is old and it used to be the norm a decade
ago. These places were cleaned.
Just some minor reordering, and the usual cleanup of call places for
those which didn't need it. We don't include the whole tools.h into
stats-t anymore but just tools-t.h.
The type file was slightly tidied. The cli-specific APPCTX_CLI_ST1_* flag
definitions were moved to cli.h. The type file was adjusted to include
buf-t.h and not the huge buf.h. A few call places were fixed because they
did not need this include.
The cfg_peers external declaration was moved to the main file instead
of the type one. A few types were still missing from the proto, causing
warnings in the functions prototypes (proxy, stick_table).
The TASK_IS_TASKLET() macro was moved to the proto file instead of the
type one. The proto part was a bit reordered to remove a number of ugly
forward declaration of static inline functions. About a tens of C and H
files had their dependency dropped since they were not using anything
from task.h.
global.h was one of the messiest files, it has accumulated tons of
implicit dependencies and declares many globals that make almost all
other file include it. It managed to silence a dependency loop between
server.h and proxy.h by being well placed to pre-define the required
structs, forcing struct proxy and struct server to be forward-declared
in a significant number of files.
It was split in to, one which is the global struct definition and the
few macros and flags, and the rest containing the functions prototypes.
The UNIX_MAX_PATH definition was moved to compat.h.
A few includes were missing in each file. A definition of
struct polled_mask was moved to fd-t.h. The MAX_POLLERS macro was
moved to defaults.h
Stdio used to be silently inherited from whatever path but it's needed
for list_pollers() which takes a FILE* and which can thus not be
forward-declared.
Now the file is ready to be stored into its final destination. A few
minor reorderings were performed to keep the file properly organized,
making the various sections more visible (cache & lockless).
In addition and to stay consistent, memory.c was renamed to pool.c.
This one is included almost everywhere and used to rely on a few other
.h that are not needed (unistd, stdlib, standard.h). It could possibly
make sense to split it into multiple parts to distinguish operations
performed on timers and the internal time accounting, but at this point
it does not appear much important.
All files that were including one of the following include files have
been updated to only include haproxy/api.h or haproxy/api-t.h once instead:
- common/config.h
- common/compat.h
- common/compiler.h
- common/defaults.h
- common/initcall.h
- common/tools.h
The choice is simple: if the file only requires type definitions, it includes
api-t.h, otherwise it includes the full api.h.
In addition, in these files, explicit includes for inttypes.h and limits.h
were dropped since these are now covered by api.h and api-t.h.
No other change was performed, given that this patch is large and
affects 201 files. At least one (tools.h) was already freestanding and
didn't get the new one added.
This is where other imported components are located. All files which
used to directly include ebtree were touched to update their include
path so that "import/" is now prefixed before the ebtree-related files.
The ebtree.h file was slightly adjusted to read compiler.h from the
common/ subdirectory (this is the only change).
A build issue was encountered when eb32sctree.h is loaded before
eb32tree.h because only the former checks for the latter before
defining type u32. This was addressed by adding the reverse ifdef
in eb32tree.h.
No further cleanup was done yet in order to keep changes minimal.
By default, HAProxy is able to implicitly upgrade an H1 client connection to an
H2 connection if the first request it receives from a given HTTP connection
matches the HTTP/2 connection preface. This way, it is possible to support H1
and H2 clients on a non-SSL connections. It could be a problem if for any
reason, the H2 upgrade is not acceptable. "option disable-h2-upgrade" may now be
used to disable it, per proxy. The main puprose of this option is to let an
admin to totally disable the H2 support for security reasons. Recently, a
critical issue in the HPACK decoder was fixed, forcing everyone to upgrade their
HAProxy version to fix the bug. It is possible to disable H2 for SSL
connections, but not on clear ones. This option would have been a viable
workaround.
A list of variables is now associated to each tcp-check ruleset. It is more a
less a list of set-var expressions. This list may be filled during the
configuration parsing. The listed variables will then be set during each
execution of the tcp-check healthcheck, at the begining, before execution of the
the first tcp-check rule.
This patch is mandatory to convert all protocol checks to tcp-checks. It is a
way to customize shared tcp-check rulesets.
To allow reusing these blocks without consuming more memory, their list
should be static and share-able accross uses. The head of the list will
be shared as well.
It is thus necessary to extract the head of the rule list from the proxy
itself. Transform it into a pointer instead, that can be easily set to
an external dynamically allocated head.
Don't assume the connection always has a valid session in "owner".
Instead, attempt to retrieve the session from the stream, and modify
the error snapshot code to not assume we always have a session, or the proxy
for the other end.
This patch introduces the 'http-after-response' rules. These rules are evaluated
at the end of the response analysis, just before the data forwarding, on ALL
HTTP responses, the server ones but also all responses generated by
HAProxy. Thanks to this ruleset, it is now possible for instance to add some
headers to the responses generated by the stats applet. Following actions are
supported :
* allow
* add-header
* del-header
* replace-header
* replace-value
* set-header
* set-status
* set-var
* strict-mode
* unset-var
this log could be sometimes a bit confusing (depending on the number in
fact) when you read it (e.g is it the number of active connection?) -
only trained eyes knows haproxy output a different log when closing
active connections while stopping.
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
It is now possible to import in a proxy, fully or partially, error files
declared in an http-errors section. It may be done using the "errorfiles"
directive, followed by a name and optionally a list of status code. If there is
no status code specified, all error files of the http-errors section are
imported. Otherwise, only error files associated to the listed status code are
imported. For instance :
http-errors my-errors
errorfile 400 ...
errorfile 403 ...
errorfile 404 ...
frontend frt
errorfiles my-errors 403 404 # ==> error 400 not imported
rate-limits are valid for both frontend and listen, but not backend; so
we can simplify this check in a similar manner as it is done in e.g
max-keep-alive-queue.
this should fix github issue #449
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
In proxy_capture_error(), input data are copied in the error snapshot. The copy
must take care of the data wrapping. But the length of the first block is
wrong. It should be the amount of contiguous input data that can be copied
starting from the input's beginning. But the mininum between the input length
and the buffer size minus the input length is used instead. So it is a problem
if input data are wrapping or if more than the half of the buffer is used by
input data.
This patch must be backported as far as 1.9.
in the context of seamless reload and busy polling, older processes will
create unecessary cpu conflicts; we can assume there is no need for busy
polling for old processes which are waiting to be terminated.
This patch is not a bug fix itself but might be a good stability
improvment when you are un the context of frequent seamless reloads with
a high "hard-stop-after" value; for that reasons I think this patch
should be backported in all 2.x versions.
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
With a TCP frontend, it is possible to upgrade a connection to HTTP when the
backend is in HTTP mode. Concretly the upgrade install a new mux. So, once it is
done, the downgrade to TCP is no longer possible. So we must take care to never
assign a TCP backend to a stream on this connection. Otherwise, HAProxy crashes
because raw data from the server are handled as structured data on the client
side.
This patch fixes the issue #420. It must be backported to all versions
supporting the HTX.
We use it half times for the global_listener_queue and half times
for a proxy's queue and this requires the callers to take care of
these. Let's split it in two versions, the current one working only
on the global queue and another one dedicated to proxies for the
per-proxy queues. This cleans up quite a bit of code.
The proxies' soft_stop() function closes the FDs in all opened states
except LI_PAUSED. This means that a transient error on a listener might
cause it to turn back to the READY state if it happens exactly when a
reload signal is received.
This must be backported to all supported versions.
When using the master CLI with 'fd@', during a reload, the master CLI
proxy is stopped. Unfortunately if this is an inherited FD it is closed
too, and the master CLI won't be able to bind again during the
re-execution. It lead the master to fallback in waitpid mode.
This patch forbids the inherited FDs in the master's listeners to be
closed during a proxy_stop().
This patch is mandatory to use the -W option in VTest versions that contain the
-mcli feature.
(86e65f1024)
Should be backported as far as 1.9.
Instead of using the same type for regular linked lists and "autolocked"
linked lists, use a separate type, "struct mt_list", for the autolocked one,
and introduce a set of macros, similar to the LIST_* macros, with the
MT_ prefix.
When we use the same entry for both regular list and autolocked list, as
is done for the "list" field in struct connection, we know have to explicitely
cast it to struct mt_list when using MT_ macros.
When we upgrade the mux from TCP to H2/HTX, don't use cs_destroy() to free
the conn_stream, use cs_free() instead. Using cs_destroy() would call the
mux detach method, and at that point of time the mux would be the H2 mux,
which knows nothing about that conn_stream, so bad things would happen.
This should eventually make upgrade from TCP to H2/HTX work, and fix
the github issue #196.
This should be backported to 2.0.
In stream_end_backend(), if we're upgrading from TCP to H1/HTX, as we don't
destroy the stream, we have to add the SF_HTX flag on the stream, or bad
things will happen.
This was broken when attempting to fix github issue #196.
This should be backported to 2.0.
There were 221 places where a status message or an error message were built
to be returned on the CLI. All of them were replaced to use cli_err(),
cli_msg(), cli_dynerr() or cli_dynmsg() depending on what was expected.
This removed a lot of duplicated code because most of the times, 4 lines
are replaced by a single, safer one.
In stream_set_backend(), if we have a TCP stream, and we want to upgrade it
to H2 instead of attempting ot reuse the stream, just destroy the
conn_stream, make sure we don't log anything about the stream, and pretend
we failed setting the backend, so that the stream will get destroyed.
New streams will then be created by the mux, as if the connection just
happened.
This fixes a crash when upgrading from TCP to H2, as the H2 mux totally
ignored the conn_stream provided by the upgrade, as reported in github
issue #196.
This should be backported to 2.0.
A problem involving server slowstart was reported by @max2k1 in issue #197.
The problem is that pendconn_grab_from_px() takes the proxy lock while
already under the server's lock while process_srv_queue() first takes the
proxy's lock then the server's lock.
While the latter seems more natural, it is fundamentally incompatible with
mayn other operations performed on servers, namely state change propagation,
where the proxy is only known after the server and cannot be locked around
the servers. Howwever reversing the lock in process_srv_queue() is trivial
and only the few functions related to dynamic cookies need to be adjusted
for this so that the proxy's lock is taken for each server operation. This
is possible because the proxy's server list is built once at boot time and
remains stable. So this is what this patch does.
The comments in the proxy and server structs were updated to mention this
rule that the server's lock may not be taken under the proxy's lock but
may enclose it.
Another approach could consist in using a second lock for the proxy's queue
which would be different from the regular proxy's lock, but given that the
operations above are rare and operate on small servers list, there is no
reason for overdesigning a solution.
This fix was successfully tested with 10000 servers in a backend where
adjusting the dyncookies in loops over the CLI didn't have a measurable
impact on the traffic.
The only workaround without the fix is to disable any occurrence of
"slowstart" on server lines, or to disable threads using "nbthread 1".
This must be backported as far as 1.8.
There is no standard case for HTTP header names because, as stated in the
RFC7230, they are case-insensitive. So applications must handle them in a
case-insensitive manner. But some bogus applications erroneously rely on the
case used by most browsers. This problem becomes critical with HTTP/2
because all header names must be exchanged in lowercase. And HAProxy uses the
same convention. All header names are sent in lowercase to clients and servers,
regardless of the HTTP version.
This design choice is linked to the HTX implementation. So, for previous
versions (2.0 and 1.9), a workaround is to disable the HTX mode to fall
back to the legacy HTTP mode.
Since the legacy HTTP mode was removed, some users reported interoperability
issues because their application was not able anymore to handle HTTP/1 message
received from HAProxy. So, we've decided to add a way to change the case of some
headers before sending them. It is now possible to define a "mapping" between a
lowercase header name and a version supported by the bogus application. To do
so, you must use the global directives "h1-case-adjust" and
"h1-case-adjust-file". Then options "h1-case-adjust-bogus-client" and
"h1-case-adjust-bogus-server" may be used in proxy sections to enable the
conversion. See the configuration manual for more info.
Of course, our advice is to urgently upgrade these applications for
interoperability concerns and because they may be vulnerable to various types of
content smuggling attacks. But, if your are really forced to use an unmaintained
bogus application, you may use these directive, at your own risks.
If it is relevant, this feature may be backported to 2.0.
There is one unprotected call to stop_proxy() from the manage_proxy()
task, so there is a single caller by definition, but there is also
another such call from the CLI's "shutdown frontend" parser. This
one does it under the proxy's lock but the first one doesn't use it.
Thus it is theorically possible to corrupt the list of listeners in a
proxy by issuing "shutdown frontend" and SIGUSR1 exactly at the same
time. While it sounds particularly contrived or stupid, it could
possibly happen with automated tools that would send actions via
various channels. This could cause the process to loop forever or
to crash and thus stop faster than expected.
This might be backported as far as 1.8.
The keywords req* and rsp* are now unsupported. So the corresponding lists are
now unused. It is safe to remove them from the structure proxy.
As a result, the code dealing with these rules in HTTP analyzers was also
removed.
The old module proto_http does not exist anymore. All code dedicated to the HTTP
analysis is now grouped in the file proto_htx.c. So, to finish the polishing
after removing the legacy HTTP code, proto_htx.{c,h} files have been moved in
http_ana.{c,h} files.
In addition, all HTX analyzers and related functions prefixed with "htx_" have
been renamed to start with "http_" instead.
First of all, all legacy HTTP analyzers and all functions exclusively used by
them were removed. So the most of the functions in proto_http.{c,h} were
removed. Only functions to deal with the HTTP transaction have been kept. Then,
http_msg and hdr_idx modules were entirely removed. And finally the structure
http_msg was lightened of all its useless information about the legacy HTTP. The
structure hdr_ctx was also removed because unused now, just like unused states
in the enum h1_state. Note that the memory pool "hdr_idx" was removed and
"http_txn" is now smaller.
This was only used for the legacy HTTP mode where the connection mode was
handled by the HTTP analyzers. In HTX, the function http_adjust_conn_mode() does
nothing. The connection mode is handled by the muxes.
To know if an upgrade from TCP to H1 must be performed, we now only need to know
if a non HTX stream is assigned to an HTTP backend. So we don't rely anymore on
the flag PR_O2_USE_HTX to handle such upgrades.
Since the legacy HTTP mode is disabled and no multiplexer relies on it anymore,
there is no reason to have 2 multiplexer protocols for the HTTP. So the protocol
PROTO_MODE_HTX was removed and all HTTP multiplexers use now PROTO_MODE_HTTP.
From this commit, the legacy HTTP mode is now definitely disabled. It is the
first commit of a long series to remove the legacy HTTP code. Now, all HTTP
processing is done using the HTX internal representation. Since the version 2.0,
It is the default mode. So now, it is no more possible to disable the HTX to
fallback on the legacy HTTP mode. If you still use "[no] option http-use-htx", a
warning will be emitted during HAProxy startup. Note the passthough multiplexer
is now only usable for TCP proxies.
Just calling conn_force_unsubscribe() from conn_upgrade_mux_fe() is not
enough, as there may be multiple XPRT involved. Instead, require that
any user of conn_upgrade_mux_fe() unsubscribe itself before calling it.
This should fix upgrading a TCP connection to HTX when using SSL.
This should be backported to 2.0.
As reported in GH issue #109 and in discourse issue
https://discourse.haproxy.org/t/haproxy-returns-408-or-504-error-when-timeout-client-value-is-every-25d
the time parser doesn't error on overflows nor underflows. This is a
recurring problem which additionally has the bad taste of taking a long
time before hitting the user.
This patch makes parse_time_err() return special error codes for overflows
and underflows, and adds the control in the call places to report suitable
errors depending on the requested unit. In practice, underflows are almost
never returned as the parsing function takes care of rounding values up,
so this might possibly happen on 64-bit overflows returning exactly zero
after rounding though. It is not really possible to cut the patch into
pieces as it changes the function's API, hence all callers.
Tests were run on about every relevant part (cookie maxlife/maxidle,
server inter, stats timeout, timeout*, cli's set timeout command,
tcp-request/response inspect-delay).
As reported in GH issue #99, when hard-stop-after triggers and threads
are in use, the chance that any thread releases the resources in use by
the other ones is non-null. Thus no thread should be allowed to deinit()
nor exit by itself.
Here we take a different approach. We simply use a 3rd possible value
for the "killed" variable so that all threads know they must break out
of the run-poll-loop and immediately stop.
This patch was tested by commenting the stream_shutdown() calls in
hard_stop() to increase the chances to see a stream use released
resources. With this fix applied, it never crashes anymore.
This fix should be backported to 1.9 and 1.8.
We still have quite a number of build macros which are mapped 1:1 to a
USE_something setting in the makefile but which have a different name.
This patch cleans this up by renaming them to use the USE_something
one, allowing to clean up the makefile and make it more obvious when
reading the code what build option needs to be added.
The following renames were done :
ENABLE_POLL -> USE_POLL
ENABLE_EPOLL -> USE_EPOLL
ENABLE_KQUEUE -> USE_KQUEUE
ENABLE_EVPORTS -> USE_EVPORTS
TPROXY -> USE_TPROXY
NETFILTER -> USE_NETFILTER
NEED_CRYPT_H -> USE_CRYPT_H
CONFIG_HAP_CRYPT -> USE_LIBCRYPT
CONFIG_HAP_NS -> DUSE_NS
CONFIG_HAP_LINUX_SPLICE -> USE_LINUX_SPLICE
CONFIG_HAP_LINUX_TPROXY -> USE_LINUX_TPROXY
CONFIG_HAP_LINUX_VSYSCALL -> USE_LINUX_VSYSCALL
Add a new retry-on keyword, "all-retryable-errors", that activates retry
for all errors that are considered retryable.
This currently activates retry for "conn-failure", "empty-response",
"junk-respones", "response-timeout", "0rtt-rejected", "500", "502", "503" and
"504".
This patch adds the support for the "table" line parsing in "peers" sections
to declare stick-table in such sections. This also prevents the user from having
to declare dummy backends sections with a unique stick-table inside.
Even if still supported, this usage will become deprecated.
To do so, the ->table member of proxy struct which is a stktable struct is replaced
by a pointer to a stktable struct allocated at parsing time in src/cfgparse-listen.c
for the dummy stick-table backends and in src/cfgparse.c for "peers" sections.
This has an impact on the code for stick-table sample converters and on the stickiness
rules parsers which first store the name of the dummy before resolving the rules.
This patch replaces proxy_tbl_by_name() calls by stktable_find_by_name() calls
to lookup for stick-tables stored in "stktable_by_name" ebtree at parsing time.
There is only one remaining place where proxy_tbl_by_name() is used: src/hlua.c.
At several places in the code we relied on the fact that ->size member of stick-table
was equal to zero to consider the stick-table was present by not configured,
this do not make sense anymore as ->table member of struct proxyis fow now on a pointer.
These tests are replaced by a test on ->table value itself.
In "peers" section we do not have to temporary store the name of the section the
stick-table are attached to because this name is obviously already known just after
having entered this "peers" section.
About the CLI stick-table I/O handler, the pointer to proxy struct is replaced by
a pointer to a stktable struct.
Add a way to retry requests if we got a junk response from the server, ie
an incomplete response, or something that is not valid HTTP.
To do so, one can use the new "junk-response" keyword for retry-on.
Add a new keyword for retry-on, 0rtt-rejected. If set, we will try to
replay requests for which we sent early data that got rejected by the
server.
If that option is set, we will attempt to use 0rtt if "allow-0rtt" is set
on the server line even if the client didn't send early data.
When running in HTX mode, if we sent the request, but failed to get the
answer, either because the server just closed its socket, we hit a server
timeout, or we get a 404, 408, 425, 500, 501, 502, 503 or 504 error,
attempt to retry the request, exactly as if we just failed to connect to
the server.
To do so, add a new backend keyword, "retry-on".
It accepts a list of keywords, which can be "none" (never retry),
"conn-failure" (we failed to connect, or to do the SSL handshake),
"empty-response" (the server closed the connection without answering),
"response-timeout" (we timed out while waiting for the server response),
or "404", "408", "425", "500", "501", "502", "503" and "504".
The default is "conn-failure".
The legacy HTTP mode is no more the default one. So now, by default, without any
option in your configuration, all proxies will use the HTX mode. The line
"option http-use-htx" in proxy sections are now useless, except to cancel the
legacy HTTP mode. To fallback on legacy HTTP mode, you should use the line "no
option http-use-htx" explicitly.
Note that the reg-tests still work by default on legacy HTTP mode. The HTX will
be enabled by default in a futur commit.
It is now possible to upgrade TCP streams to HTX when an HTTP backend is set for
a TCP frontend (both with the HTX enabled). So concretely, in such case, an
upgrade is performed from the mux pt to the mux h1. The current CS and the
channel's buffer are used to initialize the mux h1.
This will be mandatory to allow upgrades from TCP to HTTP in HTX. Of course, raw
buffers will still be used by default on TCP proxies, this option sets or
not. But if you want to handle mux upgrades from a TCP proxy, you must enable
the HTX on it and on all its backends.
There is only a small change in the lua code. Because TCP proxies can be HTX
aware, to exclude TCP services only for HTTP proxies, we must also check the
mode (TCP/HTTP) now.
Before c8d5b95 the "maxconn" of the backend of dynamic "use_backend"
rules was not modified (this does not make sense and this is correct).
When implementing proxy_adjust_all_maxconn(), c8d5b95 commit missed this case.
With this patch we adjust the "maxconn" of the backend of such rules only if
they are not dynamic.
Without this patch reg-tests/http-rules/h00003.vtc could make haproxy crash.
Historically the default frontend's maxconn used to be quite low (2000),
which was sufficient two decades ago but often proved to be a problem
when users had purposely set the global maxconn value but forgot to set
the frontend's.
There is no point in keeping this arbitrary limit for frontends : when
the global maxconn is lower, it's already too high and when the global
maxconn is much higher, it becomes a limiting factor which causes trouble
in production.
This commit allows the value to be set to zero, which becomes the new
default value, to mean it's not directly limited, or in fact it's set
to the global maxconn. Since this operation used to be performed before
computing a possibly automatic global maxconn based on memory limits,
the calculation of the maxconn value and its propagation to the backends'
fullconn has now moved to a dedicated function, proxy_adjust_all_maxconn(),
which is called once the global maxconn is stabilized.
This comes with two benefits :
1) a configuration missing "maxconn" in the defaults section will not
limit itself to a magically hardcoded value but will scale up to the
global maxconn ;
2) when the global maxconn is not set and memory limits are used instead,
the frontends' maxconn automatically adapts, and the backends' fullconn
as well.
It is possible to update a frontend's maxconn from the CLI. Unfortunately
when doing this it scratches all listeners' maxconn values and sets them
all to the new frontend's value. This can be problematic when mixing
different traffic classes (bind to interface or private networks, etc).
Now that the listener's maxconn is allowed to remain unset, let's not
change these values when setting the frontend's maxconn. This way the
overall frontend's limit can be raised but if certain specific listeners
had their own value forced in the config, they will be preserved. This
makes more sense and is more in line with the principle of defaults
propagation.
It's pointless to always set and maintain l->maxconn because the accept
loop already enforces the frontend's limit anyway. Thus let's stop setting
this value by default and keep it to zero meaning "no limit". This way the
frontend's maxconn will be used by default. Of course if a value is set,
it will be enforced.
At a number of places we used to have null tests on bind_proc for
listeners and proxies. Let's simplify all these tests by always
having the proper bits reported via proc_mask().
I would have sworn it was done, probably we lost it during the refactoring.
If a frontend is in HTX and the backend not (and conersely), this is
normally detected at config parsing time unless the rule is dynamic. In
this case we must abort with an error 500. The logs will report "RR"
(resource issue while processing request) with the frontend and the
backend assigned, so that it's possible to figure what was attempted.
This must be backported to 1.9.
This switches explicit calls to various trivial registration methods for
keywords, muxes or protocols from constructors to INITCALL1 at stage
STG_REGISTER. All these calls have in common to consume a single pointer
and return void. Doing this removes 26 constructors. The following calls
were addressed :
- acl_register_keywords
- bind_register_keywords
- cfg_register_keywords
- cli_register_kw
- flt_register_keywords
- http_req_keywords_register
- http_res_keywords_register
- protocol_register
- register_mux_proto
- sample_register_convs
- sample_register_fetches
- srv_register_keywords
- tcp_req_conn_keywords_register
- tcp_req_cont_keywords_register
- tcp_req_sess_keywords_register
- tcp_res_cont_keywords_register
- flt_register_keywords
This was the largest function of the whole file, taking a rough second
to build alone. Let's move it to a distinct file along with a few
dependencies. Doing so saved about 2 seconds on the total build time.
Remaining calls to si_cant_put() were all for lack of room and were
turned to si_rx_room_blk(). A few places where SI_FL_RXBLK_ROOM was
cleared by hand were converted to si_rx_room_rdy().
The now unused si_cant_put() function was removed.
An unstoppable listener is a listener which won't be stop during a soft
stop. The unstoppable_jobs variable is incremented and the listener
won't prevent the process to leave properly.
It is not a good idea to use this feature (the LI_O_NOSTOP flag) with a
listener that need to be bind again on another process during a soft
reload.
It doesn't make sense to limit this code to applets, as any stream
interface can use it. Let's rename it by simply dropping the "applet_"
part of the name. No other change was made except updating the comments.
This patch implements analysers for parsing the CLI and extra features
for the master's CLI.
For each command (sent alone, or separated by ; or \n) the request
analyser will determine to which server it should send the request.
The 'mode cli' proxy is able to parse a prefix for each command which is
used to select the apropriate server. The prefix start by @ and is
followed by "master", the PID preceded by ! or the relative PID. (e.g.
@master, @1, @!1234). The servers are not round-robined anymore.
The command is sent with a SHUTW which force the server to close the
connection after sending its response. However the proxy allows a
keepalive connection on the client side and does not close.
The response analyser does not do much stuff, it only reinits the
connection when it received a close from the server, and forward the
response. It does not analyze the response data.
The only guarantee of the end of the response is the close of the
server, we can't rely on the double \n since it's not send by every
command.
This could be reimplemented later as a filter.
Instead of having a separate area for the captured data, we now have a
contigous block made of the descriptor and the data. At the moment, since
the area is dynamically allocated, we can adjust its size to what is
needed, but the idea is to quickly switch to a pool and an LRU list.
Now upon error we dynamically allocate the snapshot instead of overwriting
it. This way there is no more memory wasted in the proxy to hold the two
error snapshot descriptors. Also an appreciable side effect of this is that
the proxy's lock is only taken during the pointer swap, no more while copying
the buffer's contents. This saves 480 bytes of memory per proxy.
The proxy's lock it held while filling the error but not while dumping
it, so it's possible to dereference pointers being replaced, typically
server pointers. The risk is very low and unlikely but not inexistent.
Since "show errors" is rarely used in parallel, let's simply grab the
proxy's lock while dumping. Ideally we should use an R/W lock here but
it will not make any difference.
This patch must be backported to 1.8, but the code is in proto_http.c
there, though mostly similar.
This function now captures an error regardless of its side and protocol.
The caller must pass a number of elements and may pass a protocol-specific
structure and a callback to display it. Later this function may deal with
more advanced allocation techniques to avoid allocating as many buffers
as proxies.
Server state file has no indication that a server is currently managed
by a DNS SRV resolution.
And thus, both feature (DNS SRV resolution and server state), when used
together, does not provide the expected behavior: a smooth experience...
This patch introduce the "SRV record name" in the server state file and
loads and applies it if found and wherever required.
This patch applies to haproxy-dev branch only. For backport, a specific patch
is provided for 1.8.
The proxy-related commands like "{enable|disable|shutdown} frontend",
"{enable|disable} dynamic-cookie", "set dynamic-cookie-key" were not
protected against concurrent accesses making their use dangerous with
threads.
This patch must be backported to 1.8.
We'll need trees to manage the queues by priorities. This change replaces
the list with a tree based on a single key. It's effectively a list but
allows us to get rid of the list management right now.
Now all the code used to manipulate chunks uses a struct buffer instead.
The functions are still called "chunk*", and some of them will progressively
move to the generic buffer handling code as they are cleaned up.
In preparation for thread-specific runqueues, change the task API so that
the callback takes 3 arguments, the task itself, the context, and the state,
those were retrieved from the task before. This will allow these elements to
change atomically in the scheduler while the application uses the copied
value, and even to have NULL tasks later.
When creating a state file using "show servers state" an empty field is
created in the srv_addr column if the server is from the socket family
AF_UNIX. This leads to a warning on start up when using
"load-server-state-from-file". This patch defaults srv_addr to "-" if
the socket family is not covered.
This patch should be backported to 1.8.
In order to use arbitrary data in the CLI (multiple lines or group of words
that must be considered as a whole, for example), it is now possible to add a
payload to the commands. To do so, the first line needs to end with a special
pattern: <<\n. Everything that follows will be left untouched by the CLI parser
and will be passed to the commands parsers.
Per-command support will need to be added to take advantage of this
feature.
Signed-off-by: Aurlien Nephtali <aurelien.nephtali@corp.ovh.com>
During the migration to the second version of the pools, the new
functions and pool pointers were all called "pool_something2()" and
"pool2_something". Now there's no more pool v1 code and it's a real
pain to still have to deal with this. Let's clean this up now by
removing the "2" everywhere, and by renaming the pool heads
"pool_head_something".
Rename the global variable "proxy" to "proxies_list".
There's been multiple proxies in haproxy for quite some time, and "proxy"
is a potential source of bugs, a number of functions have a "proxy" argument,
and some code used "proxy" when it really meant "px" or "curproxy". It worked
by pure luck, because it usually happened while parsing the config, and thus
"proxy" pointed to the currently parsed proxy, but we should probably not
rely on this.
[wt: some of these are definitely fixes that are worth backporting]
At a number of places, bitmasks are used for process affinity and to map
listeners to processes. Every time 1UL<<(relative_pid-1) is used. Let's
create a "pid_bit" variable corresponding to this value to clean this up.
Now, each proxy contains a lock that must be used when necessary to protect
it. Moreover, all proxy's counters are now updated using atomic operations.
2 global locks have been added to protect, respectively, the run queue and the
wait queue. And a process mask has been added on each task. Like for FDs, this
mask is used to know which threads are allowed to process a task.
For many tasks, all threads are granted. And this must be your first intension
when you create a new task, else you have a good reason to make a task sticky on
some threads. This is then the responsibility to the process callback to lock
what have to be locked in the task context.
Nevertheless, all tasks linked to a session must be sticky on the thread
creating the session. It is important that I/O handlers processing session FDs
and these tasks run on the same thread to avoid conflicts.
This is a huge patch with many changes, all about the DNS. Initially, the idea
was to update the DNS part to ease the threads support integration. But quickly,
I started to refactor some parts. And after several iterations, it was
impossible for me to commit the different parts atomically. So, instead of
adding tens of patches, often reworking the same parts, it was easier to merge
all my changes in a uniq patch. Here are all changes made on the DNS.
First, the DNS initialization has been refactored. The DNS configuration parsing
remains untouched, in cfgparse.c. But all checks have been moved in a post-check
callback. In the function dns_finalize_config, for each resolvers, the
nameservers configuration is tested and the task used to manage DNS resolutions
is created. The links between the backend's servers and the resolvers are also
created at this step. Here no connection are kept alive. So there is no needs
anymore to reopen them after HAProxy fork. Connections used to send DNS queries
will be opened on demand.
Then, the way DNS requesters are linked to a DNS resolution has been
reworked. The resolution used by a requester is now referenced into the
dns_requester structure and the resolution pointers in server and dns_srvrq
structures have been removed. wait and curr list of requesters, for a DNS
resolution, have been replaced by a uniq list. And Finally, the way a requester
is removed from a DNS resolution has been simplified. Now everything is done in
dns_unlink_resolution.
srv_set_fqdn function has been simplified. Now, there is only 1 way to set the
server's FQDN, independently it is done by the CLI or when a SRV record is
resolved.
The static DNS resolutions pool has been replaced by a dynamoc pool. The part
has been modified by Baptiste Assmann.
The way the DNS resolutions are triggered by the task or by a health-check has
been totally refactored. Now, all timeouts are respected. Especially
hold.valid. The default frequency to wake up a resolvers is now configurable
using "timeout resolve" parameter.
Now, as documented, as long as invalid repsonses are received, we really wait
all name servers responses before retrying.
As far as possible, resources allocated during DNS configuration parsing are
releases when HAProxy is shutdown.
Beside all these changes, the code has been cleaned to ease code review and the
doc has been updated.
For HTTP/2 we'll need some buffer-only equivalent functions to some of
the ones applying to channels and still squatting the bi_* / bo_*
namespace. Since these names have kept being misleading for quite some
time now and are really getting annoying, it's time to rename them. This
commit will use "ci/co" as the prefix (for "channel in", "channel out")
instead of "bi/bo". The following ones were renamed :
bi_getblk_nc, bi_getline_nc, bi_putblk, bi_putchr,
bo_getblk, bo_getblk_nc, bo_getline, bo_getline_nc, bo_inject,
bi_putchk, bi_putstr, bo_getchr, bo_skip, bi_swpbuf
Some places call delete_listener() then decrement the number of
listeners and jobs. At least one other place calls delete_listener()
without doing so, but since it's in deinit(), it's harmless and cannot
risk to cause zombie processes to survive. Given that the number of
listeners and jobs is incremented when creating the listeners, it's
much more logical to symmetrically decrement them when deleting such
listeners.
The server state and weight was reworked to handle
"pending" values updated by checks/CLI/LUA/agent.
These values are commited to be propagated to the
LB stack.
In further dev related to multi-thread, the commit
will be handled into a sync point.
Pending values are named using the prefix 'next_'
Current values used by the LB stack are named 'cur_'
Make it so for each server, instead of specifying a hostname, one can use
a SRV label.
When doing so, haproxy will first resolve the SRV label, then use the
resulting hostnames, as well as port and weight (priority is ignored right
now), to each server using the SRV label.
It is resolved periodically, and any server disappearing from the SRV records
will be removed, and any server appearing will be added, assuming there're
free servers in haproxy.
When several stick-tables were configured with several peers sections,
only a part of them could be synchronized: the ones attached to the last
parsed 'peers' section. This was due to the fact that, at least, the peer I/O handler
refered to the wrong peer section list, in fact always the same: the last one parsed.
The fact that the global peer section list was named "struct peers *peers"
lead to this issue. This variable name is dangerous ;).
So this patch renames global 'peers' variable to 'cfg_peers' to ensure that
no such wrong references are still in use, then all the functions wich used
old 'peers' variable have been modified to refer to the correct peer list.
Must be backported to 1.6 and 1.7.
This patch adds a new stats socket command to modify server
FQDNs at run time.
Its syntax:
set server <backend>/<server> fqdn <FQDN>
This patch also adds FQDNs to server state file at the end
of each line for backward compatibility ("-" if not present).
When running with multiple process, if some proxies are just assigned
to some processes, the other processes will just close the file descriptors
for the listening sockets. However, we may still have to provide those
sockets when reloading, so instead we just try hard to pretend those proxies
are dead, while keeping the sockets opened.
A new global option, no-reused-socket", has been added, to restore the old
behavior of closing the sockets not bound to this process.
When SIGUSR1 is received, haproxy enters in soft-stop and quits when no
connection remains.
It can happen that the instance remains alive for a long time, depending
on timeouts and traffic. This option ensures that soft-stop won't run
for too long.
Example:
global
hard-stop-after 30s # Once in soft-stop, the instance will remain
# alive for at most 30 seconds.
A tcp half connection can cause 100% CPU on expiration.
First reproduced with this haproxy configuration :
global
tune.bufsize 10485760
defaults
timeout server-fin 90s
timeout client-fin 90s
backend node2
mode tcp
timeout server 900s
timeout connect 10s
server def 127.0.0.1:3333
frontend fe_api
mode tcp
timeout client 900s
bind :1990
use_backend node2
Ie timeout server-fin shorter than timeout server, the backend server
sends data, this package is left in the cache of haproxy, the backend
server continue sending fin package, haproxy recv fin package. this
time the session information is as follows:
time the session information is as follows:
0x2373470: proto=tcpv4 src=127.0.0.1:39513 fe=fe_api be=node2
srv=def ts=08 age=1s calls=3 rq[f=848000h,i=0,an=00h,rx=14m58s,wx=,ax=]
rp[f=8004c020h,i=0,an=00h,rx=,wx=14m58s,ax=] s0=[7,0h,fd=6,ex=]
s1=[7,18h,fd=7,ex=] exp=14m58s
rp has set the CF_SHUTR state, next, the client sends the fin package,
session information is as follows:
0x2373470: proto=tcpv4 src=127.0.0.1:39513 fe=fe_api be=node2
srv=def ts=08 age=38s calls=4 rq[f=84a020h,i=0,an=00h,rx=,wx=,ax=]
rp[f=8004c020h,i=0,an=00h,rx=1m11s,wx=14m21s,ax=] s0=[7,0h,fd=6,ex=]
s1=[9,10h,fd=7,ex=] exp=1m11s
After waiting 90s, session information is as follows:
0x2373470: proto=tcpv4 src=127.0.0.1:39513 fe=fe_api be=node2
srv=def ts=04 age=4m11s calls=718074391 rq[f=84a020h,i=0,an=00h,rx=,wx=,ax=]
rp[f=8004c020h,i=0,an=00h,rx=?,wx=10m49s,ax=] s0=[7,0h,fd=6,ex=]
s1=[9,10h,fd=7,ex=] exp=? run(nice=0)
cpu information:
6899 root 20 0 112224 21408 4260 R 100.0 0.7 3:04.96 haproxy
Buffering is set to ensure that there is data in the haproxy buffer, and haproxy
can receive the fin package, set the CF_SHUTR flag, If the CF_SHUTR flag has been
set, The following code does not clear the timeout message, causing cpu 100%:
stream.c:process_stream:
if (unlikely((res->flags & (CF_SHUTR|CF_READ_TIMEOUT)) == CF_READ_TIMEOUT)) {
if (si_b->flags & SI_FL_NOHALF)
si_b->flags |= SI_FL_NOLINGER;
si_shutr(si_b);
}
If you have closed the read, set the read timeout does not make sense.
With or without cf_shutr, read timeout is set:
if (tick_isset(s->be->timeout.serverfin)) {
res->rto = s->be->timeout.serverfin;
res->rex = tick_add(now_ms, res->rto);
}
After discussion on the mailing list, setting half-closed timeouts the
hard way here doesn't make sense. They should be set only at the moment
the shutdown() is performed. It will also solve a special case which was
already reported of some half-closed timeouts not working when the shutw()
is performed directly at the stream-interface layer (no analyser involved).
Since the stream interface layer cannot know the timeout values, we'll have
to store them directly in the stream interface so that they are used upon
shutw(). This patch does this, fixing the problem.
An easier reproducer to validate the fix is to keep the huge buffer and
shorten all timeouts, then call it under tcploop server and client, and
wait 3 seconds to see haproxy run at 100% CPU :
global
tune.bufsize 10485760
listen px
bind :1990
timeout client 90s
timeout server 90s
timeout connect 1s
timeout server-fin 3s
timeout client-fin 3s
server def 127.0.0.1:3333
$ tcploop 3333 L W N20 A P100 F P10000 &
$ tcploop 127.0.0.1:1990 C S10000000 F
This adds 3 new commands to the cli :
enable dynamic-cookie backend <backend> that enables dynamic cookies for a
specified backend
disable dynamic-cookie backend <backend> that disables dynamic cookies for a
specified backend
set dynamic-cookie-key backend <backend> that lets one change the dynamic
cookie secret key, for a specified backend.
When the stream's backend was defined, the request's analyzers flag was always
set to 0 if the stream had no listener. This bug was introduced with the filter
API but never triggered (I think so).
Because of the commit 5820a366, it is now possible to encountered it. For
example, this happens when the trace filter is enabled on a SPOE backend. The
fix is pretty trivial.
This fix must be backported to 1.7.
It is important to defined analyzers (AN_REQ_* and AN_RES_*) in the same order
they are evaluated in process_stream. This order is really important because
during analyzers evaluation, we run them in the order of the lower bit to the
higher one. This way, when an analyzer adds/removes another one during its
evaluation, we know if it is located before or after it. So, when it adds an
analyzer which is located before it, we can switch to it immediately, even if it
has already been called once but removed since.
With the time, and introduction of new analyzers, this order was broken up. the
main problems come from the filter analyzers. We used values not related with
their evaluation order. Furthermore, we used same values for request and response
analyzers.
So, to fix the bug, filter analyzers have been splitted in 2 distinct lists to
have different analyzers for the request channel than those for the response
channel. And of course, we have moved them to the right place.
Some other analyzers have been reordered to respect the evaluation order:
* AN_REQ_HTTP_TARPIT has been moved just before AN_REQ_SRV_RULES
* AN_REQ_PRST_RDP_COOKIE has been moved just before AN_REQ_STICKING_RULES
* AN_RES_STORE_RULES has been moved just after AN_RES_WAIT_HTTP
Note today we have 29 analyzers, all stored into a 32 bits bitfield. So we can
still add 4 more analyzers before having a problem. A good way to fend off the
problem for a while could be to have a different bitfield for request and
response analyzers.
[wt: all of this must be backported to 1.7, and part of it must be backported
to 1.6 and 1.5]
This one now migrates to the general purpose cli.p0 for the proxy pointer,
cli.p1 for the server pointer, and cli.i0 for the proxy's instance if only
one has to be dumped.
[wt: while it could seem suspicious, the preceeding call to
dump_servers_state() indeed flushes the trash in case anything is
emitted. No backport needed though.]
Several CLI commands require a frontend, so let's have a function to
look this one up and prepare the appropriate error message and the
appctx's state in case of failure.
This commit introduces "tcp-request session" rules. These are very
much like "tcp-request connection" rules except that they're processed
after the handshake, so it is possible to consider SSL information and
addresses rewritten by the proxy protocol header in actions. This is
particularly useful to track proxied sources as this was not possible
before, given that tcp-request content rules are processed after each
HTTP request. Similarly it is possible to assign the proxied source
address or the client's cert to a variable.
Instead of repeating the type of the LHS argument (sizeof(struct ...))
in calls to malloc/calloc, we directly use the pointer
name (sizeof(*...)). The following Coccinelle patch was used:
@@
type T;
T *x;
@@
x = malloc(
- sizeof(T)
+ sizeof(*x)
)
@@
type T;
T *x;
@@
x = calloc(1,
- sizeof(T)
+ sizeof(*x)
)
When the LHS is not just a variable name, no change is made. Moreover,
the following patch was used to ensure that "1" is consistently used as
a first argument of calloc, not the last one:
@@
@@
calloc(
+ 1,
...
- ,1
)
Now, filter's configuration (.id, .conf and .ops fields) is stored in the
structure 'flt_conf'. So proxies own a flt_conf list instead of a filter
list. When a filter is attached to a stream, it gets a pointer on its
configuration. This avoids mixing the filter's context (owns by a stream) and
its configuration (owns by a proxy). It also saves 2 pointers per filter
instance.
This new analyzer will be called for each HTTP request/response, before the
parsing of the body. It is identified by AN_FLT_HTTP_HDRS.
Special care was taken about the following condition :
* the frontend is a TCP proxy
* filters are defined in the frontend section
* the selected backend is a HTTP proxy
So, this patch explicitly add AN_FLT_HTTP_HDRS analyzer on the request and the
response channels when the backend is a HTTP proxy and when there are filters
attatched on the stream.
This patch simplifies http_request_forward_body and http_response_forward_body
functions.
HTTP compression has been rewritten to use the filter API. This is more a PoC
than other thing for now. It allocates memory to work. So, if only for that, it
should be rewritten.
In the mean time, the implementation has been refactored to allow its use with
other filters. However, there are limitations that should be respected:
- No filter placed after the compression one is allowed to change input data
(in 'http_data' callback).
- No filter placed before the compression one is allowed to change forwarded
data (in 'http_forward_data' callback).
For now, these limitations are informal, so you should be careful when you use
several filters.
About the configuration, 'compression' keywords are still supported and must be
used to configure the HTTP compression behavior. In absence of a 'filter' line
for the compression filter, it is added in the filter chain when the first
compression' line is parsed. This is an easy way to do when you do not use other
filters. But another filter exists, an error is reported so that the user must
explicitly declare the filter.
For example:
listen tst
...
compression algo gzip
compression offload
...
filter flt_1
filter compression
filter flt_2
...
This patch adds the support of filters in HAProxy. The main idea is to have a
way to "easely" extend HAProxy by adding some "modules", called filters, that
will be able to change HAProxy behavior in a programmatic way.
To do so, many entry points has been added in code to let filters to hook up to
different steps of the processing. A filter must define a flt_ops sutrctures
(see include/types/filters.h for details). This structure contains all available
callbacks that a filter can define:
struct flt_ops {
/*
* Callbacks to manage the filter lifecycle
*/
int (*init) (struct proxy *p);
void (*deinit)(struct proxy *p);
int (*check) (struct proxy *p);
/*
* Stream callbacks
*/
void (*stream_start) (struct stream *s);
void (*stream_accept) (struct stream *s);
void (*session_establish)(struct stream *s);
void (*stream_stop) (struct stream *s);
/*
* HTTP callbacks
*/
int (*http_start) (struct stream *s, struct http_msg *msg);
int (*http_start_body) (struct stream *s, struct http_msg *msg);
int (*http_start_chunk) (struct stream *s, struct http_msg *msg);
int (*http_data) (struct stream *s, struct http_msg *msg);
int (*http_last_chunk) (struct stream *s, struct http_msg *msg);
int (*http_end_chunk) (struct stream *s, struct http_msg *msg);
int (*http_chunk_trailers)(struct stream *s, struct http_msg *msg);
int (*http_end_body) (struct stream *s, struct http_msg *msg);
void (*http_end) (struct stream *s, struct http_msg *msg);
void (*http_reset) (struct stream *s, struct http_msg *msg);
int (*http_pre_process) (struct stream *s, struct http_msg *msg);
int (*http_post_process) (struct stream *s, struct http_msg *msg);
void (*http_reply) (struct stream *s, short status,
const struct chunk *msg);
};
To declare and use a filter, in the configuration, the "filter" keyword must be
used in a listener/frontend section:
frontend test
...
filter <FILTER-NAME> [OPTIONS...]
The filter referenced by the <FILTER-NAME> must declare a configuration parser
on its own name to fill flt_ops and filter_conf field in the proxy's
structure. An exemple will be provided later to make it perfectly clear.
For now, filters cannot be used in backend section. But this is only a matter of
time. Documentation will also be added later. This is the first commit of a long
list about filters.
It is possible to have several filters on the same listener/frontend. These
filters are stored in an array of at most MAX_FILTERS elements (define in
include/types/filters.h). Again, this will be replaced later by a list of
filters.
The filter API has been highly refactored. Main changes are:
* Now, HA supports an infinite number of filters per proxy. To do so, filters
are stored in list.
* Because filters are stored in list, filters state has been moved from the
channel structure to the filter structure. This is cleaner because there is no
more info about filters in channel structure.
* It is possible to defined filters on backends only. For such filters,
stream_start/stream_stop callbacks are not called. Of course, it is possible
to mix frontend and backend filters.
* Now, TCP streams are also filtered. All callbacks without the 'http_' prefix
are called for all kind of streams. In addition, 2 new callbacks were added to
filter data exchanged through a TCP stream:
- tcp_data: it is called when new data are available or when old unprocessed
data are still waiting.
- tcp_forward_data: it is called when some data can be consumed.
* New callbacks attached to channel were added:
- channel_start_analyze: it is called when a filter is ready to process data
exchanged through a channel. 2 new analyzers (a frontend and a backend)
are attached to channels to call this callback. For a frontend filter, it
is called before any other analyzer. For a backend filter, it is called
when a backend is attached to a stream. So some processing cannot be
filtered in that case.
- channel_analyze: it is called before each analyzer attached to a channel,
expects analyzers responsible for data sending.
- channel_end_analyze: it is called when all other analyzers have finished
their processing. A new analyzers is attached to channels to call this
callback. For a TCP stream, this is always the last one called. For a HTTP
one, the callback is called when a request/response ends, so it is called
one time for each request/response.
* 'session_established' callback has been removed. Everything that is done in
this callback can be handled by 'channel_start_analyze' on the response
channel.
* 'http_pre_process' and 'http_post_process' callbacks have been replaced by
'channel_analyze'.
* 'http_start' callback has been replaced by 'http_headers'. This new one is
called just before headers sending and parsing of the body.
* 'http_end' callback has been replaced by 'channel_end_analyze'.
* It is possible to set a forwarder for TCP channels. It was already possible to
do it for HTTP ones.
* Forwarders can partially consumed forwardable data. For this reason a new
HTTP message state was added before HTTP_MSG_DONE : HTTP_MSG_ENDING.
Now all filters can define corresponding callbacks (http_forward_data
and tcp_forward_data). Each filter owns 2 offsets relative to buf->p, next and
forward, to track, respectively, input data already parsed but not forwarded yet
by the filter and parsed data considered as forwarded by the filter. A any time,
we have the warranty that a filter cannot parse or forward more input than
previous ones. And, of course, it cannot forward more input than it has
parsed. 2 macros has been added to retrieve these offets: FLT_NXT and FLT_FWD.
In addition, 2 functions has been added to change the 'next size' and the
'forward size' of a filter. When a filter parses input data, it can alter these
data, so the size of these data can vary. This action has an effet on all
previous filters that must be handled. To do so, the function
'filter_change_next_size' must be called, passing the size variation. In the
same spirit, if a filter alter forwarded data, it must call the function
'filter_change_forward_size'. 'filter_change_next_size' can be called in
'http_data' and 'tcp_data' callbacks and only these ones. And
'filter_change_forward_size' can be called in 'http_forward_data' and
'tcp_forward_data' callbacks and only these ones. The data changes are the
filter responsability, but with some limitation. It must not change already
parsed/forwarded data or data that previous filters have not parsed/forwarded
yet.
Because filters can be used on backends, when we the backend is set for a
stream, we add filters defined for this backend in the filter list of the
stream. But we must only do that when the backend and the frontend of the stream
are not the same. Else same filters are added a second time leading to undefined
behavior.
The HTTP compression code had to be moved.
So it simplifies http_response_forward_body function. To do so, the way the data
are forwarded has changed. Now, a filter (and only one) can forward data. In a
commit to come, this limitation will be removed to let all filters take part to
data forwarding. There are 2 new functions that filters should use to deal with
this feature:
* flt_set_http_data_forwarder: This function sets the filter (using its id)
that will forward data for the specified HTTP message. It is possible if it
was not already set by another filter _AND_ if no data was yet forwarded
(msg->msg_state <= HTTP_MSG_BODY). It returns -1 if an error occurs.
* flt_http_data_forwarder: This function returns the filter id that will
forward data for the specified HTTP message. If there is no forwarder set, it
returns -1.
When an HTTP data forwarder is set for the response, the HTTP compression is
disabled. Of course, this is not definitive.
When performing a soft stop, we used to wake up every proxy's task and
each of their table's task. The problem is that since we're able to stop
proxies and peers not bound to a specific process, we may end up calling
random junk by doing so of the proxy we're waking up is already stopped.
This causes a segfault to appear during soft reloads for old processes
not bound to a peers section if such a section exists in other processes.
Let's only consider proxies that are not stopped when doing this.
This fix must be backported to 1.5 which also has the same issue.
Since commit f83d3fe ("MEDIUM: init: stop any peers section not bound
to the correct process"), it is possible to stop unused peers on certain
processes. The problem is that the pause/resume/stop functions are not
aware of this and will pass a NULL proxy pointer to the respective
functions, resulting in segfaults in unbound processes during soft
restarts.
Properly check that the peers' frontend is still valid before calling
them.
This bug also affects 1.5 so the fix must be backported. Note that this
fix is not enough to completely get rid of the segfault, the next one
is needed as well.
This patch adds a new RFC5424-specific log-format for the structured-data
that is automatically send by __send_log() when the sender is in RFC5424
mode.
A new statement "log-format-sd" should be used in order to set log-format
for the structured-data part in RFC5424 formatted syslog messages.
Example:
log-format-sd [exampleSDID@1234\ bytes=\"%B\"\ status=\"%ST\"]
function proxy_find_best_match can update the caller by updating an int
provided in argument.
For now, proxy_find_best_match hardcode bit values 0x01, 0x02 and 0x04,
which is not understandable when reading a code exploiting them.
This patch defines 3 macros with a more explicit wording, so further
reading of a code exploiting the magic bit values will be understandable
more easily.
This patch adds a new keyword called "declare". This keyword
allow to declare some capture slots in requests and response.
It is useful for sharing capture between frontend and backends.
This function tries to spot a proxy by its name, ID and type, and
in case some elements don't match, it tries to determine which ones
could be ignored and reports which ones were ignored so that the
caller can decide whether or not it wants to pick this proxy. This
will be used for maintaining the status across reloads where the
config might have changed a bit.
It does the same as the other one except that it only focuses on the
numeric ID and the capabilities. It's used by proxy_find_by_name()
for numeric names.
Now that we can't have duplicate proxies with similar capabilities, we
can remove some painful check. The first one is the check that made the
lookup function return NULL when a duplicate is found, as it prevented
it from being used in the config parser to detect duplicates.
First, findproxy() was renamed proxy_find_by_name() so that its explicit
that a name is required for the lookup. Second, we give this function
the ability to search for tables if needed. Third we now provide inline
wrappers to pass the appropriate PR_CAP_* flags and to explicitly look
up a frontend, backend or table.
It is sometimes desirable to wait for the body of an HTTP request before
taking a decision. This is what is being done by "balance url_param" for
example. The first use case is to buffer requests from slow clients before
connecting to the server. Another use case consists in taking the routing
decision based on the request body's contents. This option placed in a
frontend or backend forces the HTTP processing to wait until either the whole
body is received, or the request buffer is full, or the first chunk is
complete in case of chunked encoding. It can have undesired side effects with
some applications abusing HTTP by expecting unbufferred transmissions between
the frontend and the backend, so this should definitely not be used by
default.
Note that it would not work for the response because we don't reset the
message state before starting to forward. For the response we need to
1) reset the message state to MSG_100_SENT or BODY , and 2) to reset
body_len in case of chunked encoding to avoid counting it twice.
Now this one is dynamically allocated. It means that 280 bytes of memory
are saved per TCP stream, but more importantly that it will become
possible to remove the l7 pointer from fetches and converters since
it will be deduced from the stream and will support being null.
A lot of care was taken because it's easy to forget a test somewhere,
and the previous code used to always trust s->txn for being valid, but
all places seem to have been visited.
All HTTP fetch functions check the txn first so we shouldn't have any
issue there even when called from TCP. When branching from a TCP frontend
to an HTTP backend, the txn is properly allocated at the same time as the
hdr_idx.
Just like for the listener, the frontend is session-wide so let's move
it to the session. There are a lot of places which were changed but the
changes are minimal in fact.
With HTTP/2, we'll have to support multiplexed streams. A stream is in
fact the largest part of what we currently call a session, it has buffers,
logs, etc.
In order to catch any error, this commit removes any reference to the
struct session and tries to rename most "session" occurrences in function
names to "stream" and "sess" to "strm" when that's related to a session.
The files stream.{c,h} were added and session.{c,h} removed.
The session will be reintroduced later and a few parts of the stream
will progressively be moved overthere. It will more or less contain
only what we need in an embryonic session.
Sample fetch functions and converters will have to change a bit so
that they'll use an L5 (session) instead of what's currently called
"L4" which is in fact L6 for now.
Once all changes are completed, we should see approximately this :
L7 - http_txn
L6 - stream
L5 - session
L4 - connection | applet
There will be at most one http_txn per stream, and a same session will
possibly be referenced by multiple streams. A connection will point to
a session and to a stream. The session will hold all the information
we need to keep even when we don't yet have a stream.
Some more cleanup is needed because some code was already far from
being clean. The server queue management still refers to sessions at
many places while comments talk about connections. This will have to
be cleaned up once we have a server-side connection pool manager.
Stream flags "SN_*" still need to be renamed, it doesn't seem like
any of them will need to move to the session.
The channels were pointers to outside structs and this is not needed
anymore since the buffers have moved, but this complicates operations.
Move them back into the session so that both channels and stream interfaces
are always allocated for a session. Some places (some early sample fetch
functions) used to validate that a channel was NULL prior to dereferencing
it. Now instead we check if chn->buf is NULL and we force it to remain NULL
until the channel is initialized.
Commit 179085c ("MEDIUM: http: move Connection header processing earlier")
introduced a regression : the backend's HTTP mode is not considered anymore
when setting the session's HTTP mode, because wait_for_request() is only
called once, when the frontend receives the request (or when the frontend
is in TCP mode, when the backend receives the request).
The net effect is that in some situations when the frontend and the backend
do not work in the same mode (eg: keep-alive vs close), the backend's mode
is ignored.
This patch moves all that processing to a dedicated function, which is
called from the original place, as well as from session_set_backend()
when switching from an HTTP frontend to an HTTP backend in different
modes.
This fix must be backported to 1.5.
Twice in a week I found people were surprized by a "conditional timeout" not
being respected, because they add "if <cond>" after a timeout, and since
they don't see any error nor read the doc, the expect it to work. Let's
make the timeout parser reject extra arguments to avoid these situations.
Long-lived sessions are often subject to half-closed sessions resulting in
a lot of sessions appearing in FIN_WAIT state in the system tables, and no
way for haproxy to get rid of them. This typically happens because clients
suddenly disconnect without sending any packet (eg: FIN or RST was lost in
the path), and while the server detects this using an applicative heart
beat, haproxy does not close the connection.
This patch adds two new timeouts : "timeout client-fin" and
"timeout server-fin". The former allows one to override the client-facing
timeout when a FIN has been received or sent. The latter does the same for
server-facing connections, which is less useful.
A switch from a TCP frontend to an HTTP backend initializes the HTTP
transaction. txn->hdr_idx.size is used by hdr_idx_init() but not
necessarily initialized yet here, because the first call to hdr_idx_init()
is in fact placed in http_init_txn(). Moving it before the call is
enough to fix it. We also remove the useless extra confusing call
to hdr_idx_init().
The bug was introduced in 1.5-dev8 with commit ac1932d ("MEDIUM:
tune.http.maxhdr makes it possible to configure the maximum number
of HTTP headers"). No backport to stable is needed.
Finn Arne Gangstad suggested that we should have the ability to break
keep-alive when the target server has reached its maxconn and that a
number of connections are present in the queue. After some discussion
around his proposed patch, the following solution was suggested : have
a per-proxy setting to fix a limit to the number of queued connections
on a server after which we break keep-alive. This ensures that even in
high latency networks where keep-alive is beneficial, we try to find a
different server.
This patch is partially based on his original proposal and implements
this configurable threshold.
Large configurations can take time to parse when thousands of backends
are in use. Let's store all the proxies in trees.
findproxy_mode() has been modified to use the tree for lookups, which
has divided the parsing time by about 2.5. But many lookups are still
present at many places and need to be dealt with.
Currently, "balance url_param check_post" randomly works. If the client
sends chunked data and there's another chunk after the one containing the
data, http_request_forward_body() will advance msg->sov and move the start
of data to the beginning of the last chunk, and get_server_ph_post() will
not find the data.
In order to avoid this, we add an HTTP_MSGF_WAIT_CONN flag whose goal is
to prevent the forwarding code from parsing until the connection is
confirmed, so that we're certain not to fail on a redispatch. Note that
we need to force channel_auto_connect() since the output buffer is empty
and a previous analyser might have stopped auto-connect.
The flag is currently set whenever some L7 POST analysis is needed for a
connect() so that it correctly addresses all corner cases involving a
possible rewind of the buffer, waiting for a better fix.
Note that this has been broken for a very long time. Even all 1.4 versions
seem broken but differently, with ->sov pointing to the end of the arguments.
So the fix should be considered for backporting to all stable releases,
possibly including 1.3 which works differently.
When using some log-format directives in header insertion without HTTP mode,
the config parser used to report a cryptic message about option httplog being
downgraded to tcplog and with "(null):0" as the file name and line number.
This is because the lfs_file and lfs_line were not properly set for some valid
use cases of log-format directives. Now we cover http-request and http-response
as well.
This is a generic health check which can be used to match a
banner or send a request and analyse a server response.
It works in a send/expect ways and many exchange can be done between
HAProxy and a server to decide the server status, making HAProxy able to
speak the server's protocol.
It can send arbitrary regular or binary strings and match content as a
regular or binary string or a regex.
Signed-off-by: Baptiste Assmann <bedis9@gmail.com>
When a process with large stick tables is replaced by a new one and remains
present until the last connection finishes, it keeps these data in memory
for nothing since they will never be used anymore by incoming connections,
except during syncing with the new process. This is especially problematic
when dealing with long session protocols such as WebSocket as it becomes
possible to stack many processes and eat a lot of memory.
So the idea here is to know if a table still needs to be synced or not,
and to purge all unused entries once the sync is complete. This means that
after a few hundred milliseconds when everything has been synchronized with
the new process, only a few entries will remain allocated (only the ones
held by sessions during the restart) and all the remaining memory will be
freed.
Note that we carefully do that only after the grace period is expired so as
not to impact a possible proxy that needs to accept a few more connections
before leaving.
Doing this required to add a sync counter to the stick tables, to know how
many peer sync sessions are still in progress in order not to flush the entries
until all synchronizations are completed.
Benoit Dolez reported a failure to start haproxy 1.5-dev19. The
process would immediately report an internal error with missing
fetches from some crap instead of ACL names.
The cause is that some versions of gcc seem to trim static structs
containing a variable array when moving them to BSS, and only keep
the fixed size, which is just a list head for all ACL and sample
fetch keywords. This was confirmed at least with gcc 3.4.6. And we
can't move these structs to const because they contain a list element
which is needed to link all of them together during the parsing.
The bug indeed appeared with 1.5-dev19 because it's the first one
to have some empty ACL keyword lists.
One solution is to impose -fno-zero-initialized-in-bss to everyone
but this is not really nice. Another solution consists in ensuring
the struct is never empty so that it does not move there. The easy
solution consists in having a non-null list head since it's not yet
initialized.
A new "ILH" list head type was thus created for this purpose : create
an Initialized List Head so that gcc cannot move the struct to BSS.
This fixes the issue for this version of gcc and does not create any
burden for the declarations.
Some actions were clearly missing to process response headers. This
patch adds a new "http-response" ruleset which provides the following
actions :
- allow : stop evaluating http-response rules
- deny : stop and reject the response with a 502
- add-header : add a header in log-format mode
- set-header : set a header in log-format mode
Improve error log reporting in the format parser by always giving the
file name, line number, and directive name instead of the hard-coded
"log-format".
Previously we got this when dealing with log-format errors:
[WARNING] 101/183012 (8561) : Warning: log-format variable name 'r' is not suited to HTTP mode
[WARNING] 101/183012 (8561) : log-format: sample fetch <hdr(a,1)> may not be reliably used with 'log-format' because it needs 'HTTP request headers,HTTP response headers' which is not available here.
[WARNING] 101/183012 (8561) : Warning: no such variable name 'k' in log-format
Now we have this :
[WARNING] 101/183016 (8593) : parsing [fmt.cfg:8] : 'log-format' variable name 'r' is reserved for HTTP mode
[WARNING] 101/183016 (8593) : parsing [fmt.cfg:8] : 'log-format' : sample fetch <hdr(a,1)> may not be reliably used here because it needs 'HTTP request headers,HTTP response headers' which is not available here.
[WARNING] 101/183016 (8593) : parsing [fmt.cfg:15] : no such variable name 'k' in 'unique-id-format'
Commit a4312fa2 merged into dev18 improved log-format management by
processing "log-format" and "unique-id-format" where they were declared,
so that the faulty args could be reported with their correct line numbers.
Unfortunately, the log-format parser considers the proxy mode (TCP/HTTP)
and now if the directive is set before the "mode" statement, it can be
rejected and report warnings.
So we really need to parse these directives at the end of a section at
least. Right now we do not have an "end of section" event, so we need
to store the file name and line number for each of these directives,
and take care of them at the end.
One of the benefits is that now the line numbers can be inherited from
the line passing "option httplog" even if it's in a defaults section.
Future improvements should be performed to report line numbers in every
log-format processed by the parser.
While ACL args were resolved after all the config was parsed, it was not the
case with sample fetch args because they're almost everywhere now.
The issue is that ACLs now solely rely on sample fetches, so their args
resolving doesn't work anymore. And many fetches involving a server, a
proxy or a userlist don't work at all.
The real issue is that at the bottom layers we have no information about
proxies, line numbers, even ACLs in order to report understandable errors,
and that at the top layers we have no visibility over the locations where
fetches are referenced (think log node).
After failing multiple unsatisfying solutions attempts, we now have a new
concept of args list. The principle is that every proxy has a list head
which contains a number of indications such as the config keyword, the
context where it's used, the file and line number, etc... and a list of
arguments. This list head is of the same type as the elements, so it
serves as a template for adding new elements. This way, it is filled from
top to bottom by the callers with the information they have (eg: line
numbers, ACL name, ...) and the lower layers just have to duplicate it and
add an element when they face an argument they cannot resolve yet.
Then at the end of the configuration parsing, a loop passes over each
proxy's list and resolves all the args in sequence. And this way there is
all necessary information to report verbose errors.
The first immediate benefit is that for the first time we got very precise
location of issues (arg number in a keyword in its context, ...). Second,
in order to do this we had to parse log-format and unique-id-format a bit
earlier, so that was a great opportunity for doing so when the directives
are encountered (unless it's a default section). This way, the recorded
line numbers for these args are the ones of the place where the log format
is declared, not the end of the file.
Userlists report slightly more information now. They're the only remaining
ones in the ACL resolving function.
Proxy's acl_requires was a copy of all bits taken from ACLs, but we'll
get rid of ACL flags and only rely on sample fetches soon. The proxy's
acl_requires was only used to allocate an HTTP context when needed, and
was even forced in HTTP mode. So better have a flag which exactly says
what it's supposed to be used for.
The lookup was broken by commit 050536d5. The server ID is
initialized to a negative value but unfortunately not all the
tests were converted. Thanks to Igor at owind for reporting it.
Instead of storing a couple of (int, ptr) in the struct connection
and the struct session, we use a different method : we only store a
pointer to an integer which is stored inside the target object and
which contains a unique type identifier. That way, the pointer allows
us to retrieve the object type (by dereferencing it) and the object's
address (by computing the displacement in the target structure). The
NULL pointer always corresponds to OBJ_TYPE_NONE.
This reduces the size of the connection and session structs. It also
simplifies target assignment and compare.
In order to improve the generated code, we try to put the obj_type
element at the beginning of all the structs (listener, server, proxy,
si_applet), so that the original and target pointers are always equal.
A lot of code was touched by massive replaces, but the changes are not
that important.
Since recent changes on the global frontend, it was not possible anymore
to soft-reload a process which had a stats socket because the socket would
not be disabled upon reload. The only solution to this endless madness is
to have the global frontend part of normal proxies.
Since we don't want to get an ID that shifts all other proxies and causes
trouble in deployed environments, we assign it ID #0 which other proxies
can't grab, and we don't report it in the stats pages.
Herv Commowick reported an issue : haproxy dies in a segfault during a
soft restart if it tries to pause a disabled proxy. This is because disabled
proxies have no management task so we must not wake the task up. This could
easily remain unnoticed since the old process was expected to go away, so
having it go away faster was not really troubling. However, with sync peers,
it is obvious that there is no peer sync during this reload.
This issue has been introduced in 1.5-dev7 with the removal of the
maintain_proxies() function. No backport is needed.
Navigating through listeners was very inconvenient and error-prone. Not to
mention that listeners were linked in reverse order and reverted afterwards.
In order to definitely get rid of these issues, we now do the following :
- frontends have a dual-linked list of bind_conf
- frontends have a dual-linked list of listeners
- bind_conf have a dual-linked list of listeners
- listeners have a pointer to their bind_conf
This way we can now navigate from anywhere to anywhere and always find the
proper bind_conf for a given listener, as well as find the list of listeners
for a current bind_conf.
Some settings need to be merged per-bind config line and are not necessarily
SSL-specific. It becomes quite inconvenient to have this ssl_conf SSL-specific,
so let's replace it with something more generic.
SSL config holds many parameters which are per bind line and not per
listener. Let's use a per-bind line config instead of having it
replicated for each listener.
At the moment we only do this for the SSL part but this should probably
evolved to handle more of the configuration and maybe even the state per
bind line.
Get rid of these confusing BF_* flags. Now channel naming should clearly
be used everywhere appropriate.
No code was changed, only a renaming was performed. The comments about
channel operations was updated.
Option httplog needs to be checked only once the proxy has been validated,
so that its final mode (tcp/http) can be used. Also we need to check for
httplog before checking the log format, so that we can report a warning
about this specific option and not about the format it implies.
Tunnel timeouts are used when TCP connections are forwarded, or
when forwarding upgraded HTTP connections (WebSocket) as well as
CONNECT requests to proxies.
This timeout allows long-lived sessions to be supported without
having to set large timeouts to normal requests.
All keywords registered using a cfg_kw_list now make use of the new error reporting
framework. This allows easier and more precise error reporting without having to
deal with complex buffer allocation issues.
The Unique ID, is an ID generated with several informations. You can use
a log-format string to customize it, with the "unique-id-format" keyword,
and insert it in the request header, with the "unique-id-header" keyword.
Sometimes it is desirable to forward a particular request to a specific
server without having to declare a dedicated backend for this server. This
can be achieved using the "use-server" rules. These rules are evaluated after
the "redirect" rules and before evaluating cookies, and they have precedence
on them. There may be as many "use-server" rules as desired. All of these
rules are evaluated in their declaration order, and the first one which
matches will assign the server.
parse_logformat_string: parse the string, detect the type: text,
separator or variable
parse_logformat_var: dectect variable name
parse_logformat_var_args: parse arguments and flags
add_to_logformat_list: add to the logformat linked list
This patch settles the 2 loggers limitation.
Loggers are now stored in linked lists.
Using "global log", the global loggers list content is added at the end
of the current proxy list. Each "log" entries are added at the end of
the proxy list.
"no log" flush a logger list.
For a long time, the max number of headers was taken as a part of the buffer
size. Since the header size can be configured at runtime, it does not make
much sense anymore.
Nothing was making it necessary to have a static value, so let's turn this into
a tunable with a default value of 101 which equals what was previously used.
It makes no sense to have one pointer to the hdr_idx pool in each proxy
struct since these pools do not depend on the proxy. Let's have a common
pool instead as it is already the case for other types.
Upon an incoming soft restart request, we first pause all frontends and
peers. If the caller changes its mind and asks us to resume (eg: failed
binding), we must resume all the frontends and peers. Unfortunately the
peers were not resumed.
The code was arranged to avoid code duplication (which used to hide the
issue till now).
Peers' frontends must have logging disabled by default, which was not
the case, so logs were randomly emitted upon restart, sometimes causing
a new process to fail to replace the old one.
This was revealed with one of the very latest patches which caused
the listener_queue not to be initialized on the stats socket frontend.
And in fact a number of other ones were missing too. This is getting so
boring that now we'll always make use of the same function to initialize
any proxy. Doing so has even saved about 500 bytes on the binary due to
the avoided code redundancy.
No backport is needed.
This function is finally not needed anymore, as it has been replaced with
a per-proxy task that is scheduled when some limits are encountered on
incoming connections or when the process is stopping. The savings should
be noticeable on configs with a large number of proxies. The most important
point is that the rate limiting is now enforced in a clean and solid way.
Peers were stopped on every call to maintain_proxies when stopping=1,
while they should only be stopped once upon call to soft_stop(). This
bug has little impact, mostly increased CPU usage. It's not needed to
backport it.
Patch d9bbe17b used to limit the rate-limit to off-by-one to avoid
a busy loop when the limit is reached. Now that the listeners are
automatically disabled and queued when a limit is reached, we don't
need this workaround anymore and can bring back the most accurate
computation.
Those states have been replaced with PR_STFULL and PR_STREADY respectively,
as it is what matches them the best now. Also, two occurrences of PR_STIDLE
in peers.c have been removed as this did not provide any form of error recovery
anyway.
Now maintain_proxies() only changes proxies states and does not affect their
listeners anymore since they are autonomous. A proxy will switch between the
PR_STIDLE and PR_STRUN states depending whether it's saturated or not. Next
step will consist in renaming PR_STIDLE to PR_STFULL. This state is now only
used to report the proxy state in the stats.
All listeners that are limited by a proxy-specific resource are now
queued at the proxy's and not globally. This allows finer-grained
wakeups when releasing resource.
Managing listeners state is difficult because they have their own state
and can at the same time have theirs dictated by their proxy. The pause
is not done properly, as the proxy code is fiddling with sockets. By
introducing new functions such as pause_listener()/resume_listener(), we
make it a bit more obvious how/when they're supposed to be used. The
listen_proxies() function was also renamed to resume_proxies() since
it's only used for pause/resume.
This patch is the first in a series aiming at getting rid of the maintain_proxies
mess. In the end, proxies should not call enable_listener()/disable_listener()
anymore.
There are some very rare server-to-server applications that abuse the HTTP
protocol and expect the payload phase to be highly interactive, with many
interleaved data chunks in both directions within a single request. This is
absolutely not supported by the HTTP specification and will not work across
most proxies or servers. When such applications attempt to do this through
haproxy, it works but they will experience high delays due to the network
optimizations which favor performance by instructing the system to wait for
enough data to be available in order to only send full packets. Typical
delays are around 200 ms per round trip. Note that this only happens with
abnormal uses. Normal uses such as CONNECT requests nor WebSockets are not
affected.
When "option http-no-delay" is present in either the frontend or the backend
used by a connection, all such optimizations will be disabled in order to
make the exchanges as fast as possible. Of course this offers no guarantee on
the functionality, as it may break at any other place. But if it works via
HAProxy, it will work as fast as possible. This option should never be used
by default, and should never be used at all unless such a buggy application
is discovered. The impact of using this option is an increase of bandwidth
usage and CPU usage, which may significantly lower performance in high
latency environments.
This change should be backported to 1.4 since the first report of such a
misuse was in 1.4. Next patch will also be needed.
It's very annoying that frontend and backend stats are merged because we
don't know what we're observing. For instance, if a "listen" instance
makes use of a distinct backend, it's impossible to know what the bytes_out
means.
Some points take care of not updating counters twice if the backend points
to the frontend, indicating a "listen" instance. The thing becomes more
complex when we try to add support for server side keep-alive, because we
have to maintain a pointer to the backend used for last request, and to
update its stats. But we can't perform such comparisons anymore because
the counters will not match anymore.
So in order to get rid of this situation, let's have both frontend AND
backend stats in the "struct proxy". We simply update the relevant ones
during activity. Some of them are only accounted for in the backend,
while others are just for frontend. Maybe we can improve a bit on that
later, but the essential part is that those counters now reflect what
they really mean.
This counter will help quickly spot whether there are new errors or not.
It is also assigned to each capture so that a script can keep trace of
which capture was taken when.
This counter is incremented for each incoming connection and each active
listener, and is used to prevent haproxy from stopping upon SIGUSR1. It
will thus be possible for some tasks in increment this counter in order
to prevent haproxy from dying until they have completed their job.
Signal zero is never delivered by the system. However having a signal to
which functions and tasks can subscribe to be notified of a stopping event
is useful. So this patch does two things :
1) allow signal zero to be delivered from any function of signal handler
2) make soft_stop() deliver this signal so that tasks can be notified of
a stopping condition.
The conn_retries attribute is now assigned when switching from SI_ST_INI
to SI_ST_REQ. This eliminates one of the last dependencies on the backend
in the frontend's accept() function.
The conn_retries still lies in the session and its initialization depends
on the backend when it may not yet be known. Let's first move it to the
stream interface.
It was particularly embarrassing that the server timeout was assigned
to buffers during an accept() just to be potentially changed later in
case of a use_backend rule. The frontend side has nothing to do with
server timeouts.
Now we initialize them right after the connect() succeeds. Later this
should change for a unique stream-interface timeout setting only.
The connection timeout stored in the buffer has not been used since the
stream interface were introduced. Let's get rid of it as it's one of the
things that complicate factoring of the accept() functions.
The 'client.c' file now only contained frontend-specific functions,
so it has naturally be renamed 'frontend.c'. Same for client.h. This
has also been an opportunity to remove some cross references from
files that should not have depended on it.
In the end, this file should contain a protocol-agnostic accept()
code, which would initialize a session, task, etc... based on an
accept() from a lower layer. Right now there are still references
to TCP.
The rate-limit feature relied on a timer to define how long a frontend
must remain idle. It was not considering the pending connections, so it
was almost always ready to be used again and only the accept's limit was
preventing new connections from coming in. By accounting for the pending
connection, we can compute a correct delay and effectively make the
frontend go idle for that (short) time.
Commit 4605e3b641cebbdbb2ee5726e5bbc3c03a2d7b5e was not enough, because
connections passing from a TCP frontend to an HTTP backend without any
ACL and via a "default_backend" statement were still working on non-initialized
data. An initialization was missing in the session_set_backend() function, next
to the initialization of hdr_idx.
It's sometimes convenient to know if a proxy has processed any connection
at all when stopping it. Since a soft restart causes the "Proxy stopped"
message to be logged for each proxy, let's add the number of connections
so that it's possible afterwards to check whether a proxy had received
any connection.
Gabriel Sosa reported that logs were appearing with BADREQ when
'option httplog' was used with a TCP proxy (eg: inherited via a
default instance). This patch detects it and falls back to tcplog
after emitting a warning.
(cherry picked from commit 5f0bd6537f)
Right now, an HTTP server cannot track a TCP server and vice-versa.
This patch enables proxy tracking without relying on the proxy's mode
(tcp/http/health). It only requires a matching proxy name to exist. The
original function was renamed to findproxy_mode().
Krzysztof reported that using names only for get weight/set weight
was not enough because it's still possible to have multiple servers
with the same name (and my test config is one of those). He suggested
to be able to designate them by their unique numeric IDs by prefixing
the ID with a dash.
That way we can have :
set weight #120/#2
as well as
get weight static/srv1 10
int get_backend_server(const char *bk_name, const char *sv_name,
struct proxy **bk, struct server **sv);
This function scans the list of backends and servers to retrieve the first
backend and the first server with the given names, and sets them in both
parameters. It returns zero if either is not found, or non-zero and sets
the ones it did not found to NULL. If a NULL pointer is passed for the
backend, only the pointer to the server will be updated.
Until now it was required that every custom ID was above 1000 in order to
avoid conflicts. Now we have the list of all assigned IDs and can automatically
pick the first unused one. This means that it is perfectly possible to interleave
automatic IDs with persistent IDs and the parser will automatically allocate
unused values starting with 1.
By default, when data is sent over a socket, both the write timeout and the
read timeout for that socket are refreshed, because we consider that there is
activity on that socket, and we have no other means of guessing if we should
receive data or not.
While this default behaviour is desirable for almost all applications, there
exists a situation where it is desirable to disable it, and only refresh the
read timeout if there are incoming data. This happens on sessions with large
timeouts and low amounts of exchanged data such as telnet session. If the
server suddenly disappears, the output data accumulates in the system's
socket buffers, both timeouts are correctly refreshed, and there is no way
to know the server does not receive them, so we don't timeout. However, when
the underlying protocol always echoes sent data, it would be enough by itself
to detect the issue using the read timeout. Note that this problem does not
happen with more verbose protocols because data won't accumulate long in the
socket buffers.
When this option is set on the frontend, it will disable read timeout updates
on data sent to the client. There probably is little use of this case. When
the option is set on the backend, it will disable read timeout updates on
data sent to the server. Doing so will typically break large HTTP posts from
slow lines, so use it with caution.
LB algo macros were composed of the LB algo by itself without any indication
of the method to use to look up a server (the lb function itself). This
method was implied by the LB algo, which was not very convenient to add
more algorithms. Now we have several fields in the LB macros, some to
describe what to look for in the requests, some to describe how to transform
that (kind of algo) and some to describe what lookup function to use.
The next patch will make it possible to factor out some code for all algos
which rely on a map.
Analyser bitmaps are now stored in the frontend and backend, and
combined at configuration time. That way, set_session_backend()
does not need to perform any protocol-specific combinations.
The new statement "persist rdp-cookie" enables RDP cookie
persistence. The RDP cookie is then extracted from the RDP
protocol, and compared against available servers. If a server
matches the RDP cookie, then it gets the connection.
Since we can now switch from TCP to HTTP, we need to be able to apply
the HTTP request timeout after switching. That means we need to take
it from the backend and not from the frontend. Since the backend points
to the frontend before switching, that changes nothing for the normal
case.
This patch allows a TCP frontend to switch to an HTTP backend.
During the switch, missing structures are automatically allocated.
The HTTP parser is enabled so that the backend first waits for a
full HTTP request.
The HTTP processing has been splitted into 7 steps, one of which
is not anymore HTTP-specific (content-switching). That way, it
becomes possible to use "use_backend" rules in TCP mode. A new
"use_server" directive should follow soon.
This is a first step towards support of multiple configuration files.
Now readcfgfile() only reads a file in memory and performs very minimal
parsing. The checks are performed afterwards.
Some users want to keep the max sessions/s seen on servers, frontends
and backends for capacity planning. It's easy to grab it while the
session count is updated, so let's keep it.
