In the same way than for the tasks, the applets api was changed to be able
to start a new appctx on a thread subset. For now the feature is
disabled. Only appctx_new_here() is working. But it will be possible to
start an appctx on a specific thread or a subset via a mask.
A .init callback function is defined for the peer_applet applet. This
function finishes the appctx startup by calling appctx_finalize_startup()
and its handles the stream customization.
The session created for frontend applets is now totally owns by the
corresponding appctx. It means the appctx is now responsible to release
it. This removes the hack in stream_free() about frontend applets to be sure
to release the session.
The two functions became exact copies since there's no more special case
for the appctx owner. Let's merge them into a single one, that simplifies
the code.
This one is the pointer to the conn_stream which is always in the
endpoint that is always present in the appctx, thus it's not needed.
This patch removes it and replaces it with appctx_cs() instead. A
few occurences that were using __cs_strm(appctx->owner) were moved
directly to appctx_strm() which does the equivalent.
Let's instead define a 4-state enum solely for this use case, and place
it into the command's context. Note that END and FIN were already
aliases, which is why they were merged.
This makes use of the generic command context allocation so that the
appctx doesn't have to declare a specific one anymore. The context is
created during parsing. The code also uses st2 which deserves being
addressed in separate commit.
This flag is no longer needed now that it must always match the presence
of a destination address on the backend conn_stream. Worse, before previous
patch, if it were to be accidently removed while the address is present, it
could result in a leak of that address since alloc_dst_address() would first
be called to flush it.
Its usage has a long history where addresses were stored in an area shared
with the connection, but as this is no longer the case, there's no reason
for putting this burden onto application-level code that should not focus
on setting obscure flags.
The only place where that made a small difference is in the dequeuing code
in case of queue redistribution, because previously the code would first
clear the flag, and only later when trying to deal with the queue, would
release the address. It's not even certain whether there would exist a
code path going to connect_server() without calling pendconn_dequeue()
first (e.g. retries on queue timeout maybe?).
Now the pendconn_dequeue() code will rely on SF_ASSIGNED to decide to
clear and release the address, since that flag is always set while in
a server's queue, and its clearance implies that we don't want to keep
the address. At least it remains consistent and there's no more risk of
leaking it.
There were plenty of leftovers from old code that were never removed
and that are not needed at all since these files do not use any
definition depending on fcntl.h, let's drop them.
Remaining flags and associated functions are move in the conn-stream
scope. These flags are added on the endpoint and not the conn-stream
itself. This way it will be possible to get them from the mux or the
applet. The functions to get or set these flags are renamed accordingly with
the "cs_" prefix and updated to manipualte a conn-stream instead of a
stream-interface.
si_shutr(), si_shutw(), si_chk_rcv() and si_chk_snd() are moved in the
conn-stream scope and renamed, respectively, cs_shutr(), cs_shutw(),
cs_chk_rcv(), cs_chk_snd() and manipulate a conn-stream instead of a
stream-interface.
The stream-interface state (SI_ST_*) is now in the conn-stream. It is a
mechanical replacement for now. Nothing special. SI_ST_* and SI_SB_* were
renamed accordingly. Utils functions to manipulate these infos were moved
under the conn-stream scope.
But it could be good to keep in mind that this part should be
reworked. Indeed, at the CS level, we only need to know if it is ready to
receive or to send. The state of conn-stream from INI to EST is only used on
the server side. The client CS is immediately set to EST. Thus current
SI_ST_* states should probably be moved to the stream to reflect the server
connection state during the establishment stage.
Flags to disable lingering and half-close are now handled at the conn-stream
level. Thus SI_FL_NOLINGER and SI_FL_NOHALF stream-int flags are replaced by
CS_FL_NOLINGER and CS_FL_NOHALF conn-stream flags.
The source and destination addresses at the applicative layer are moved from
the stream-interface to the conn-stream. This simplifies a bit the code and
it is a logicial step to remove the stream-interface.
At many places, we now use the new CS functions to get a stream or a channel
from a conn-stream instead of using the stream-interface API. It is the
first step to reduce the scope of the stream-interfaces. The main change
here is about the applet I/O callback functions. Before the refactoring, the
stream-interface was the appctx owner. Thus, it was heavily used. Now, as
far as possible,the conn-stream is used. Of course, it remains many calls to
the stream-interface API.
The conn-stream endpoint is now shared between the conn-stream and the
applet or the multiplexer. If the mux or the applet is created first, it is
responsible to also create the endpoint and share it with the conn-stream.
If the conn-stream is created first, it is the opposite.
When the endpoint is only owned by an applet or a mux, it is called an
orphan endpoint (there is no conn-stream). When it is only owned by a
conn-stream, it is called a detached endpoint (there is no mux/applet).
The last entity that owns an endpoint is responsible to release it. When a
mux or an applet is detached from a conn-stream, the conn-stream
relinquishes the endpoint to recreate a new one. This way, the endpoint
state is never lost for the mux or the applet.
It is a transient commit to prepare next changes. Now, when a conn-stream is
created from an applet or a multiplexer, an endpoint is always provided. In
addition, the API to create a conn-stream was specialized to have one
function per type.
The next step will be to share the endpoint structure.
It is a transient commit to prepare next changes. It is possible to pass a
pre-allocated endpoint to create a new conn-stream. If it is NULL, a new
endpoint is created, otherwise the existing one is used. There no more
change at the conn-stream level.
In the applets, all conn-stream are created with no pre-allocated
endpoint. But for multiplexers, an endpoint is systematically created before
creating the conn-stream.
This change is only significant for the multiplexer part. For the applets,
the context and the endpoint are the same. Thus, there is no much change. For
the multiplexer part, the connection was used to set the conn-stream
endpoint and the mux's stream was the context. But it is a bit strange
because once a mux is installed, it takes over the connection. In a
wonderful world, the connection should be totally hidden behind the mux. The
stream-interface and, in a lesser extent, the stream, still access the
connection because that was inherited from the pre-multiplexer era.
Now, the conn-stream endpoint is the mux's stream (an opaque entity for the
conn-stream) and the connection is the context. Dedicated functions have
been added to attached an applet or a mux to a conn-stream.
The appctx owner is now always a conn-stream. Thus, it can be set during the
appctx allocation. But, to do so, the conn-stream must be created first. It
is not a problem on the server side because the conn-stream is created with
the stream. On the client side, we must take care to create the conn-stream
first.
This change should ease other changes about the applets bootstrapping.
In issue #1184, cppcheck complains about some inconsistent printf
formats. At least the one in peer_prepare_hellomsg() that uses "%u"
for the int "min_ver" is wrong. Let's force other types to make it
happy, though constants cannot cause trouble.
Thanks to all previous changes, it is now possible to move the
stream-interface into the conn-stream. To do so, some SI functions are
removed and their conn-stream counterparts are added. In addition, the
conn-stream is now responsible to create and release the
stream-interface. While the stream-interfaces were inlined in the stream
structure, there is now a pointer in the conn-stream. stream-interfaces are
now dynamically allocated. Thus a dedicated pool is added. It is a temporary
change because, at the end, the stream-interface structure will most
probably disappear.
To be able to move the stream-interface from the stream to the conn-stream,
all access to the SI is done via the conn-stream. This patch is limited to
the peers part.
In the same way the conn-stream has a pointer to the stream endpoint , this
patch adds a pointer to the application entity in the conn-stream
structure. For now, it is a stream or a health-check. It is mandatory to
merge the stream-interface with the conn-stream.
Because appctx is now an endpoint of the conn-stream, there is no reason to
still have the stream-interface as appctx owner. Thus, the conn-stream is
now the appctx owner.
Thanks to previous changes, it is now possible to set an appctx as endpoint
for a conn-stream. This means the appctx is no longer linked to the
stream-interface but to the conn-stream. Thus, a pointer to the conn-stream
is explicitly stored in the stream-interface. The endpoint (connection or
appctx) can be retrieved via the conn-stream.
The approach used for skipping conn_cur in commit db2ab8218 ("MEDIUM:
stick-table: never learn the "conn_cur" value from peers") was wrong,
it only works with simple tables but as soon as frequency counters or
arrays are exchanged after conn_cur, the stream is desynchronized and
incorrect values are read. This is because the fields have a variable
length depending on their types and cannot simply be skipped by a
"continue" statement.
Let's change the approach to make sure we continue to completely parse
these local-only fields, and only drop the value at the moment we're
about to store them, since this is exactly the intent.
A simpler approach could consist in having two sets of stktable_data_ptr()
functions, one for retrieval and one for storage, and to make the store
function return a NULL pointer for local types. For now this doesn't
seem worth the trouble.
This fixes github issue #1497. Thanks to @brenc for the reproducer.
This must be backported to 2.5.
There have been a large number of issues reported with conn_cur
synchronization because the concept is wrong. In an active-passive
setup, pushing the local connections count from the active node to
the passive one will result in the passive node to have a higher
counter than the real number of connections. Due to this, after a
switchover, it will never be able to close enough connections to
go down to zero. The same commonly happens on reloads since the new
process preloads its values from the old process, and if no connection
happens for a key after the value is learned, it is impossible to reset
the previous ones. In active-active setups it's a bit different, as the
number of connections reflects the number on the peer that pushed last.
This patch solves this by marking the "conn_cur" local and preventing
it from being learned from peers. It is still pushed, however, so that
any monitoring system that collects values from the peers will still
see it.
The patch is tiny and trivially backportable. While a change of behavior
in stable branches is never welcome, it remains possible to fix issues
if reports become frequent.
We'll need to improve the API to pass other arguments in the future, so
let's start to adapt better to the current use cases. task_new() is used:
- 18 times as task_new(tid_bit)
- 18 times as task_new(MAX_THREADS_MASK)
- 2 times with a single bit (in a loop)
- 1 in the debug code that uses a mask
This patch provides 3 new functions to achieve this:
- task_new_here() to create a task on the calling thread
- task_new_anywhere() to create a task to be run anywhere
- task_new_on() to create a task to run on a specific thread
The change is trivial and will allow us to later concentrate the
required adaptations to these 3 functions only. It's still possible
to call task_new() if needed but a comment was added to encourage the
use of the new ones instead. The debug code was not changed and still
uses it.
appctx_new() is exclusively called with tid_bit and it only uses the
mask to pass it to the accompanying task. There is no point requiring
the caller to know about a mask there, nor is there any point in
creating an applet outside of the context of its own thread anyway.
Let's drop this and pass tid_bit to task_new() directly.
This patch adds support of array data_types on the peer protocol.
The table definition message will provide an additionnal parameter
for array data-types: the number of elements of the array.
In case of array of frqp it also provides a second parameter:
the period used to compute freq counter.
The array elements are std_type values linearly encoded in
the update message.
Note: if a remote peer announces an array data_type without
parameters into the table definition message, all updates
on this table will be ignored because we can not
parse update messages consistently.
This patch fixes the computation of the bit of the current data_type
in some part of code of peer protocol where the computation is limited
to 32bits whereas the bitfield of data_types can support 64bits.
Without this patch it could result in bugs when we will define more
than 32 data_types.
Backport is useless because there is currently less than 32 data_types
The relative_pid is always 1. In mworker mode we also have a
child->relative_pid which is always equalt relative_pid, except for a
master (0) or external process (-1), but these types are usually tested
for, except for one place that was amended to carefully check for the
PROC_O_TYPE_WORKER option.
Changes were pretty limited as most usages of relative_pid were for
designating a process in stats output and peers protocol.
Lots of places iterating over nbproc or comparing with nbproc could be
simplified. Further, "bind-process" and "process" parsing that was
already limited to process 1 or "all" or "odd" resulted in a bind_proc
field that was either 0 or 1 during the init phase and later always 1.
All the checks for compatibilities were removed since it's not possible
anymore to run a frontend and a backend on different processes or to
have peers and stick-tables bound on different ones. This is the largest
part of this patch.
The bind_proc field was removed from both the proxy and the receiver
structs.
Since the "process" and "bind-process" directives are still parsed,
configs making use of correct values allowing process 1 will continue
to work.
A memory allocation failure happening during peers_register_table would
have resulted in a crash. This function is only called during init.
It was raised in GitHub issue #1233.
It could be backported to all stable branches.
There were 102 CLI commands whose help were zig-zagging all along the dump
making them unreadable. This patch realigns all these messages so that the
command now uses up to 40 characters before the delimiting colon. About a
third of the commands did not correctly list their arguments which were
added after the first version, so they were all updated. Some abuses of
the term "id" were fixed to use a more explanatory term. The
"set ssl ocsp-response" command was not listed because it lacked a help
message, this was fixed as well. The deprecated enable/disable commands
for agent/health/server were prominently written as deprecated. Whenever
possible, clearer explanations were provided.
This patch adds miscellenous informative flags raised during the initial
full resync process performed during the reload for debugging purpose.
0x00000010: Timeout waiting for a full resync from a local node
0x00000020: Timeout waiting for a full resync from a remote node
0x00000040: Session aborted learning from a local node
0x00000080: Session aborted learning from a remote node
0x00000100: A local node teach us and was fully up to date
0x00000200: A remote node teach us and was fully up to date
0x00000400: A local node teach us but was partially up to date
0x00000800: A remote node teach us but was partially up to date
0x00001000: A local node was assigned for a full resync
0x00002000: A remote node was assigned for a full resync
0x00004000: A resync was explicitly requested
This patch could be backported on any supported branch
Flags used as context to know current status of each table pushing a
full resync to a peer were correctly reset receiving a new resync
request or confirmation message but in case of local peer sync during
reload the resync request is implicit and those flags were not
correctly reset in this case.
This could result to a partial initial resync of some tables after reload
if the connection with the old process was broken and retried.
This patch reset those flags at the end of the handshake for all new
connections to be sure to push a entire full resync if needed.
This patch should be backported on all supported branches ( v >= 1.6 )
Only entries between the opposite of the last 'local update' rotating
counter were considered to be pushed. This processing worked in most
cases because updates are continually pushed trying to reach this point
but it remains some cases where updates id are more far away in the past
and appearing in futur and the push of updates is stuck until the head
reach again the tail which could take a very long time.
This patch re-work the lookup to consider that all positions on the
rotating counter is considered in the past until we reach exactly
the 'local update' value. Doing this, the updates push won't be stuck
anymore.
This patch should be backported on all supported branches ( >= 1.6 )
The commitupdate value of the table is used to check if the update
is still pending for a push for all peers. To be sure to not miss a
push we reset it just after a handshake success.
This patch should be backported on all supported branches ( >= 1.6 )
If two peers are disconnected and during this period they continue to
process a large amount of local updates, after a reconnection they
may take a long time before restarting to push their updates. because
the last pushed update would appear internally in futur.
This patch fix this resetting the cursor on acked updates at the maximum
point considered in the past if it appears in futur but it means we
may lost some updates. A clean fix would be to update the protocol to
be able to signal a remote peer that is was not updated for a too long
period and needs a full resync but this is not yet supported by the
protocol.
This patch should be backported on all supported branches ( >= 1.6 )
The re-con cursor was updated receiving any ack message
even if we are pushing a complete resync to a peer. This cursor
is reset at the end of the resync but if the connection is broken
during resync, we could re-start at an unwanted point.
With this patch, the peer stops to consider ack messages pushing
a resync since the resync process has is own acknowlegement and
is always restarted from the beginning in case of broken connection.
This patch should be backported on all supported branches ( >= 1.6 )
Receiving a resync request, the origins to start the full sync and
to reset after the full resync are mistakenly computed based on
the last update on the table instead of computed based on the
the last update acked by the node requesting the resync.
It could result in disordered or missing updates pushing to the
requester
This patch sets correctly those origins.
This patch should be backported on all supported branches ( >= 1.6 )
If a reload is performed and there is no incoming connections
from the old process to push a full resync, the new process
can be stuck waiting indefinitely for this conn and it never tries a
fallback requesting a full resync from a remote peer because the resync
timer was init to TICK_ETERNITY.
This patch forces a reset of the resync timer to default value (5 secs)
if we detect value is TICK_ETERNITY.
This patch should be backported on all supported branches ( >= 1.6 )
In proxy.c, when process is stopping we try to flush tables content
using 'stktable_trash_oldest'. A check on a counter "table->syncing" was
made to verify if there is no pending resync in progress.
But using multiple threads this counter can be increased by an other thread
only after some delay, so the content of some tables can be trashed earlier and
won't be pushed to the new process (after reload, some tables appear reset and
others don't).
This patch re-names the counter "table->syncing" to "table->refcnt" and
the counter is increased during configuration parsing (registering a table to
a peer section) to protect tables during runtime and until resync of a new
process has succeeded or failed.
The inc/dec operations are now made using atomic operations
because multiple peer sections could refer to the same table in futur.
This fix addresses github #1216.
This patch should be backported on all branches multi-thread support (v >= 1.8)
The peers task handling the "stopping" could wake up multiple
times in stopping state with WOKEN_SIGNAL: the connection to the
local peer initiated on the first processing was immediatly
shutdown by the next processing of the task and the old process
exits considering it is unable to connect. It results on
empty stick-tables after a reload.
This patch checks the flag 'PEERS_F_DONOTSTOP' to know if the
signal is considered and if remote peers connections shutdown
is already done or if a connection to the local peer must be
established.
This patch should be backported on all supported branches (v >= 1.6)
The old process checked each table resync status even if
the resync process is finished. This behavior had no known impact
except useless processing and was discovered during debugging on
an other issue.
This patch could be backported in all supported branches (v >= 1.6)
but once again, it has no impact except avoid useless processing.
The current "ADD" vs "ADDQ" is confusing because when thinking in terms
of appending at the end of a list, "ADD" naturally comes to mind, but
here it does the opposite, it inserts. Several times already it's been
incorrectly used where ADDQ was expected, the latest of which was a
fortunate accident explained in 6fa922562 ("CLEANUP: stream: explain
why we queue the stream at the head of the server list").
Let's use more explicit (but slightly longer) names now:
LIST_ADD -> LIST_INSERT
LIST_ADDQ -> LIST_APPEND
LIST_ADDED -> LIST_INLIST
LIST_DEL -> LIST_DELETE
The same is true for MT_LISTs, including their "TRY" variant.
LIST_DEL_INIT keeps its short name to encourage to use it instead of the
lazier LIST_DELETE which is often less safe.
The change is large (~674 non-comment entries) but is mechanical enough
to remain safe. No permutation was performed, so any out-of-tree code
can easily map older names to new ones.
The list doc was updated.
Both structures are identical except the name of the field starting
the period and its description. Let's call them all freq_ctr and the
period's start "curr_tick" which is generic.
This is only a temporary change and fields are expected to remain
the same with no code change (verified).
This patch replaces roughly all occurrences of an HA_ATOMIC_ADD(&foo, 1)
or HA_ATOMIC_SUB(&foo, 1) with the equivalent HA_ATOMIC_INC(&foo) and
HA_ATOMIC_DEC(&foo) respectively. These are 507 changes over 45 files.
It's been too short for quite a while now and is now full. It's still
time to extend it to 32-bits since we have room for this without
wasting any space, so we now gained 16 new bits for future flags.
The values were not reassigned just in case there would be a few
hidden u16 or short somewhere in which these flags are placed (as
it used to be the case with stream->pending_events).
The patch is tagged MEDIUM because this required to update the task's
process() prototype to use an int instead of a short, that's quite a
bunch of places.
The "show peers" output has become huge due to the dictionaries making it
less readable. Now this feature has reached a certain level of maturity
which doesn't warrant to dump it all the time, given that it was essentially
needed by developers. Let's make it optional, and disabled by default, only
when "show peers dict" is requested. The default output reminds about the
command. The output has been divided by 5 :
$ socat - /tmp/sock1 <<< "show peers dict" | wc -l
125
$ socat - /tmp/sock1 <<< "show peers" | wc -l
26
It could be useful to backport this to recent stable versions.
This counter could be hugely incremented by the peer task responsible of managing
peer synchronizations and reconnections, for instance when a peer is not reachable
there is a period where the appctx is not created. If we receive stick-table
updates before the peer session (appctx) is instantiated, we reach the code
responsible of incrementing the "new_conn" counter.
With this patch we increment this counter only when we really instantiate a new
peer session thanks to peer_session_create().
May be backported as far as 2.0.
Previous commit da2b0844f ("MINOR: peers: Add traces for peer control
messages.") introduced a build warning on some compiler versions after
the removal of variable "peers" in peer_send_msgs() because variable
"s" was used only to assign this one, and variable "si" to assign "s".
Let's remove both to fix the warning. No backport is needed.
Display traces when sending/receiving peer control messages (synchronisation, heartbeat).
Add remaining traces when parsing malformed messages (acks, stick-table definitions)
or ignoring them.
Also add traces when releasing session or when reaching the PEER_SESS_ST_ERRPROTO
peer protocol state.
This allows using the address of the server rather than the name of the
server for keeping track of servers in a backend for stickiness.
The peers code was also extended to support feeding the dictionary using
this key instead of the name.
Fixes#814
It is now possible to set the buffer used by the channel request buffer when
a stream is created. It may be useful if input data are already received,
instead of waiting the first call to the mux rcv_buf() callback. This change
is mandatory to support H1 connection with no stream attached.
For now, the multiplexers don't pass any buffer. BUF_NULL is thus used to
call stream_create_from_cs().
Another bug in the peers message parser was uncovered by last commit
1dfd4f106 ("BUG/MEDIUM: peers: fix decoding of multi-byte length in
stick-table messages"): the function return on incomplete message does
not check if the channel has a pending close before deciding to return
0. It did not hurt previously because the loop calling co_getblk() once
per character would have depleted the buffer and hit the end, causing
<0 to be returned and matching the condition. But now that we process
at once what is available this cannot be relied on anymore and it's
now clearly visible that the final check is missing.
What happens when this strikes is that if a peer connection breaks in
the middle of a message, the function will return 0 (missing data) but
the caller doesn't check for the closed buffer, subscribes to reads,
and the applet handler is immediately called again since some data are
still available. This is detected by the loop prevention and the process
dies complaining that an appctx is spinning.
This patch simply adds the check for closed channel. It must be
backported to the same versions as the fix above.
There is a bug in peer_recv_msg() due to an incorrect cast when trying
to decode the varint length of a stick-table message, causing lengths
comprised between 128 and 255 to consume one extra byte, ending in
protocol errors. The root cause of this is that peer_recv_msg() tries
hard to reimplement all the parsing and control that is already done in
intdecode() just to measure the length before calling it. And it got it
wrong.
Let's just get rid of this unneeded code duplication and solely rely on
intdecode() instead. The bug was introduced in 2.0 as part of a cleanup
pass on this code with commit 95203f218 ("MINOR: peers: Move high level
receive code to reduce the size of I/O handler."), so this patch must
be backported to 2.0.
Thanks to Yves Lafon for reporting the problem.
The TX part of a cache for a dictionary is made of an reserved array of ebtree nodes
which are pointers to dictionary entries. So when we flush the TX part of such a
cache, we must not only remove these nodes to dictionary entries from their ebtree.
We must also reset their values. Furthermore, the LRU key and the last lookup
result must also be reset.
If we could not decode the ID of a dictionary entry from a peer update message,
we must inform the remote peer about such an error as this is done for
any other decoding error.
During a peers session collision (two peer sessions opened on both side) we must
mark the peer the session of which will be shutdown as alive, if not ->reconnect
timer will be set with a wrong value if the synchro task expires after the peer
has been reconnected. This possibly leads to unexpected deconnections during handshakes.
Furthermore, this patch cancels any heartbeat tranmimission when a reconnection
is prepared.
Roughly half of the calls to sockadr_alloc() are made to copy an already
known address. Let's optionally pass it in argument so that the function
can handle the copy at the same time, this slightly simplifies its usage.
This patch adds "coll" new counter and the heartbeat timer values to "show peers"
command. It also adds the elapsed time since the last handshake to new "last_hdshk"
new peer dump field.
For now we cannot easily distinguish a peers frontend from another one,
which will be problematic to avoid reporting them when stopping their
listeners. Let's add PR_MODE_PEERS for this. It's not supposed to cause
any issue since all non-HTTP proxies are handled similarly now.
The enabled/disabled config options were stored into a "state" field
that is an integer but contained only PR_STNEW or PR_STSTOPPED, which
is a bit confusing, and causes a dependency with proxies. This was
renamed to "disabled" and is used as a boolean. The field was also
moved to the end of the struct to stop creating a hole and fill another
one.
A peer connection status must be considered as valid only if there is an applet
which has been instantiated for the connection to the peer. So, ->statuscode
should be considered as the last known peer connection status from the last
connection to this peer if any. To reflect this, "statuscode" field of peer dump
is renamed to "last_statuscode".
This patch also add "active"/"inactive" field after the peer location type
("remote" or "local") if an applet has been instantiated for this peer connection
or not.
Thank you to Emeric for having noticed this issue.
Must be backported in >=1.9 version.
Building on OpenBSD 6.7 with gcc-4.2.1 yields the following warnings
which suggest that the initialization is not taken as expected but
that the container member is reset with each initialization:
src/peers.c: In function 'peer_send_updatemsg':
src/peers.c:1000: warning: initialized field overwritten
src/peers.c:1000: warning: (near initialization for 'p.updt')
src/peers.c:1001: warning: initialized field overwritten
src/peers.c:1001: warning: (near initialization for 'p.updt')
src/peers.c:1002: warning: initialized field overwritten
src/peers.c:1002: warning: (near initialization for 'p.updt')
src/peers.c:1003: warning: initialized field overwritten
src/peers.c:1003: warning: (near initialization for 'p.updt')
src/peers.c:1004: warning: initialized field overwritten
src/peers.c:1004: warning: (near initialization for 'p.updt')
Fixing this is trivial, we just have to initialize one level at
a time.
Getting rid of this warning is cleaner solved using a 'fall through' comment,
because it clarifies intent to a human reader.
This patch adjust a few places that cause -Wimplicit-fallthrough to trigger:
- Fix typos in the comment.
- Remove redundant 'no break' that trips up gcc from comment.
- Move the comment out of the block when the 'case' is completely surrounded
by braces.
- Add comments where I could determine that the fall through was intentional.
Changes tested on
gcc (Debian 9.3.0-13) 9.3.0
Copyright (C) 2019 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
using
make -j4 all TARGET=linux-glibc USE_OPENSSL=1 USE_LUA=1 USE_ZLIB=1 USE_PCRE2=1 USE_PCRE2_JIT=1 USE_GETADDRINFO=1
This patch fixes all the leftovers from the include cleanup campaign. There
were not that many (~400 entries in ~150 files) but it was definitely worth
doing it as it revealed a few duplicates.
Most of the files dealing with error reports have to include log.h in order
to access ha_alert(), ha_warning() etc. But while these functions don't
depend on anything, log.h depends on a lot of stuff because it deals with
log-formats and samples. As a result it's impossible not to embark long
dependencies when using ha_warning() or qfprintf().
This patch moves these low-level functions to errors.h, which already
defines the error codes used at the same places. About half of the users
of log.h could be adjusted, sometimes revealing other issues such as
missing tools.h. Interestingly the total preprocessed size shrunk by
4%.
This one was not easy because it was embarking many includes with it,
which other files would automatically find. At least global.h, arg.h
and tools.h were identified. 93 total locations were identified, 8
additional includes had to be added.
In the rare files where it was possible to finalize the sorting of
includes by adjusting only one or two extra lines, it was done. But
all files would need to be rechecked and cleaned up now.
It was the last set of files in types/ and proto/ and these directories
must not be reused anymore.
This one is particularly difficult to split because it provides all the
functions used to manipulate a proxy state and to retrieve names or IDs
for error reporting, and as such, it was included in 73 files (down to
68 after cleanup). It would deserve a small cleanup though the cut points
are not obvious at the moment given the number of structs involved in
the struct proxy itself.
The current state of the logging is a real mess. The main problem is
that almost all files include log.h just in order to have access to
the alert/warning functions like ha_alert() etc, and don't care about
logs. But log.h also deals with real logging as well as log-format and
depends on stream.h and various other things. As such it forces a few
heavy files like stream.h to be loaded early and to hide missing
dependencies depending where it's loaded. Among the missing ones is
syslog.h which was often automatically included resulting in no less
than 3 users missing it.
Among 76 users, only 5 could be removed, and probably 70 don't need the
full set of dependencies.
A good approach would consist in splitting that file in 3 parts:
- one for error output ("errors" ?).
- one for log_format processing
- and one for actual logging.
Almost no change except moving the cli_kw struct definition after the
defines. Almost all users had both types&proto included, which is not
surprizing since this code is old and it used to be the norm a decade
ago. These places were cleaned.
Just some minor reordering, and the usual cleanup of call places for
those which didn't need it. We don't include the whole tools.h into
stats-t anymore but just tools-t.h.
The type file was slightly tidied. The cli-specific APPCTX_CLI_ST1_* flag
definitions were moved to cli.h. The type file was adjusted to include
buf-t.h and not the huge buf.h. A few call places were fixed because they
did not need this include.
The files were moved almost as-is, just dropping arg-t and auth-t from
acl-t but keeping arg-t in acl.h. It was useful to revisit the call places
since a handful of files used to continue to include acl.h while they did
not need it at all. Struct stream was only made a forward declaration
since not otherwise needed.
The stktable_types[] array declaration was moved to the main file as
it had nothing to do in the types. A few declarations were reordered
in the types file so that defines were before the structs. Thread-t
was added since there are a few __decl_thread(). The loss of peers.h
revealed that cfgparse-listen needed it.
The cfg_peers external declaration was moved to the main file instead
of the type one. A few types were still missing from the proto, causing
warnings in the functions prototypes (proxy, stick_table).
The TASK_IS_TASKLET() macro was moved to the proto file instead of the
type one. The proto part was a bit reordered to remove a number of ugly
forward declaration of static inline functions. About a tens of C and H
files had their dependency dropped since they were not using anything
from task.h.
global.h was one of the messiest files, it has accumulated tons of
implicit dependencies and declares many globals that make almost all
other file include it. It managed to silence a dependency loop between
server.h and proxy.h by being well placed to pre-define the required
structs, forcing struct proxy and struct server to be forward-declared
in a significant number of files.
It was split in to, one which is the global struct definition and the
few macros and flags, and the rest containing the functions prototypes.
The UNIX_MAX_PATH definition was moved to compat.h.
