This renames the "struct conn_stream" to "struct stconn" and updates
the descriptions in all comments (and the rare help descriptions) to
"stream connector" or "connector". This touches a lot of files but
the change is minimal. The local variables were not even renamed, so
there's still a lot of "cs" everywhere.
This flag is no longer needed now that it must always match the presence
of a destination address on the backend conn_stream. Worse, before previous
patch, if it were to be accidently removed while the address is present, it
could result in a leak of that address since alloc_dst_address() would first
be called to flush it.
Its usage has a long history where addresses were stored in an area shared
with the connection, but as this is no longer the case, there's no reason
for putting this burden onto application-level code that should not focus
on setting obscure flags.
The only place where that made a small difference is in the dequeuing code
in case of queue redistribution, because previously the code would first
clear the flag, and only later when trying to deal with the queue, would
release the address. It's not even certain whether there would exist a
code path going to connect_server() without calling pendconn_dequeue()
first (e.g. retries on queue timeout maybe?).
Now the pendconn_dequeue() code will rely on SF_ASSIGNED to decide to
clear and release the address, since that flag is always set while in
a server's queue, and its clearance implies that we don't want to keep
the address. At least it remains consistent and there's no more risk of
leaking it.
These flags only concerns the connection part. In addition, it is required
for a next commit, to avoid circular deps. Thus CS_SHR_* and CS_SHW_* were
renamed with the "CO_" prefix.
The stream-interface state (SI_ST_*) is now in the conn-stream. It is a
mechanical replacement for now. Nothing special. SI_ST_* and SI_SB_* were
renamed accordingly. Utils functions to manipulate these infos were moved
under the conn-stream scope.
But it could be good to keep in mind that this part should be
reworked. Indeed, at the CS level, we only need to know if it is ready to
receive or to send. The state of conn-stream from INI to EST is only used on
the server side. The client CS is immediately set to EST. Thus current
SI_ST_* states should probably be moved to the stream to reflect the server
connection state during the establishment stage.
Only the server side is concerned by the stream-interface error type. It is
useless to have an err_type field on the client side. So, it is now move to
the stream. SI_ET_* are renames STRM_ET_* and moved in stream-t.h header
file.
The previous connection state on the client side was only used for debugging
purpose to report client close. But this may be handled when the client
stream-interface is switched from SI_ST_DIS to SI_ST_CLO.
So, there only remains the previous connection state on the server side that
is used by the stream, in process_stream(), to be able to set the correct
termination flags. Thus, instead of keeping this info in the
stream-interface for only one side, the info is now stored in the stream
itself.
Flag to get the source ip/port with getsockname is now handled at the stream
level. Thus SI_FL_SRC_ADDR stream-int flag is replaced by SF_SRC_ADDR stream
flag.
The expiration date in the stream-interface was only used on the server side
to set the connect, queue or turn-around timeout. It was checked on the
frontend stream-interface, but never used concretely. So it was removed and
replaced by a connect expiration date in the stream itself. Thus, SI_FL_EXP
flag in stream-interfaces is replaced by a stream flag, SF_CONN_EXP.
The conn_retries counter was set to the max value and decremented at each
connection retry. Thus the counter reflected the number of retries left and
not the real number of retries. All calculations of redispatch or reporting
of number of retries experienced were made using subtracts from the
configured retries, which was complicated and didn't bring any benefit.
Now, this counter is set to 0 and incremented at each retry. We know we've
reached the maximum allowed connection retries by comparing it to the
configured value. In all other cases, we directly use the counter.
This patch should address the feature request #1608.
The conn_retries counter may be moved into the stream structure. It only
concerns the connection establishment. The frontend stream-interface does not
use it. So it is a logical change.
When a tcp-{request,response} content or http-request/http-response
rule delivers a final verdict (deny, accept, redirect etc), the last
evaluated one will now be recorded in the stream. The purpose is to
permit to log the last one that performed a final action. For now
the log is not produced.
Thanks to all previous changes, it is now possible to move the
stream-interface into the conn-stream. To do so, some SI functions are
removed and their conn-stream counterparts are added. In addition, the
conn-stream is now responsible to create and release the
stream-interface. While the stream-interfaces were inlined in the stream
structure, there is now a pointer in the conn-stream. stream-interfaces are
now dynamically allocated. Thus a dedicated pool is added. It is a temporary
change because, at the end, the stream-interface structure will most
probably disappear.
frontend and backend conn-streams are now directly accesible from the
stream. This way, and with some other changes, it will be possible to remove
the stream-interfaces from the stream structure.
Allow to set the master CLI in expert or experimental mode. No command
within the master are unlocked yet, but it gives the ability to send
expert or experimental commands to the workers.
echo "@1; experimental-mode on; del server be1/s2" | socat /var/run/haproxy.master -
echo "experimental-mode on; @1 del server be1/s2" | socat /var/run/haproxy.master -
We have an anti-looping protection in process_stream() that detects bugs
that used to affect a few filters like compression in the past which
sometimes forgot to handle a read0 or a particular error, leaving a
thread looping at 100% CPU forever. When such a condition is detected,
an alert it emitted and the process is killed so that it can be replaced
by a sane one:
[ALERT] (19061) : A bogus STREAM [0x274abe0] is spinning at 2057156
calls per second and refuses to die, aborting now! Please
report this error to developers [strm=0x274abe0,3 src=unix
fe=MASTER be=MASTER dst=<MCLI> txn=(nil),0 txn.req=-,0
txn.rsp=-,0 rqf=c02000 rqa=10000 rpf=88000021 rpa=8000000
sif=EST,40008 sib=DIS,84018 af=(nil),0 csf=0x274ab90,8600
ab=0x272fd40,1 csb=(nil),0
cof=0x25d5d80,1300:PASS(0x274aaf0)/RAW((nil))/unix_stream(9)
cob=(nil),0:NONE((nil))/NONE((nil))/NONE(0) filters={}]
call trace(11):
| 0x4dbaab [c7 04 25 01 00 00 00 00]: stream_dump_and_crash+0x17b/0x1b4
| 0x4df31f [e9 bd c8 ff ff 49 83 7c]: process_stream+0x382f/0x53a3
(...)
One problem with this detection is that it used to only count the call
rate because we weren't sure how to make it more accurate, but the
threshold was high enough to prevent accidental false positives.
There is actually one case that manages to trigger it, which is when
sending huge amounts of requests pipelined on the master CLI. Some
short requests such as "show version" are sufficient to be handled
extremely fast and to cause a wake up of an analyser to parse the
next request, then an applet to handle it, back and forth. But this
condition is not an error, since some data are being forwarded by
the stream, and it's easy to detect it.
This patch modifies the detection so that update_freq_ctr() only
applies to calls made without CF_READ_PARTIAL nor CF_WRITE_PARTIAL
set on any of the channels, which really indicates that nothing is
happening at all.
This is greatly sufficient and extremely effective, as the call above
is still caught (shutr being ignored by an analyser) while a loop on
the master CLI now has no effect. The "call_rate" field in the detailed
"show sess" output will now be much lower, except for bogus streams,
which may help spot them. This field is only there for developers
anyway so it's pretty fine to slightly adjust its meaning.
This patch could be backported to stable versions in case of reports
of such an issue, but as that's unlikely, it's not really needed.
Define a new stream flag SF_WEBSOCKET and a new cs flag CS_FL_WEBSOCKET.
The conn-stream flag is first set by h1/h2 muxes if the request is a
valid websocket upgrade. The flag is then converted to SF_WEBSOCKET on
the stream creation.
This will be useful to properly manage websocket streams in
connect_server().
For now, these addresses are never set. But the idea is to be able to set, at
least first, the client source and destination addresses at the stream level
without updating the session or connection ones.
Of course, because these addresses are carried by the strream-interface, it
would be possible to set server source and destination addresses at this level
too.
Functions to fill these addresses have been added: si_get_src() and
si_get_dst(). If not already set, these functions relies on underlying
layers to fill stream-interface addresses. On the frontend side, the session
addresses are used if set, otherwise the client connection ones are used. On
the backend side, the server connection addresses are used.
And just like for sessions and conncetions, si_src() and si_dst() may be used to
get source and destination addresses or the stream-interface. And, if not set,
same mechanism as above is used.
Use include file <sys/time.h> to fix compilation error with timeval in
some files. This is as reported as 'man 7 system_data_types'. The build
error is reported on NetBSD 9.2.
This should be backported up to 2.2.
Plenty of includes were present there only for struct pointers resulting
in them being used from many other places. The LoC reduced again by more
than 1% by cleaning this.
The SF_SRV_REUSED flag was set if a stream reused a backend connection.
One of its purpose is to count the total reuse on the backend in
opposition to newly instantiated connection.
However, the flag was diverted from its original purpose since the
following commit :
e8f5f5d8b228d71333fb60229dc908505baf9222
BUG/MEDIUM: servers: Only set SF_SRV_REUSED if the connection if fully ready.
With this change, the flag is not set anymore if the mux is not ready
when a connection is picked for reuse. This can happen for multiplexed
connections which are inserted in the available list as soon as created
in http-reuse always mode. The goal of this change is to not retry
immediately this request in case on an error on the same server if the
reused connection is not fully ready.
This change is justified for the retry timeout handling but it breaks
other places which still uses the flag for its original purpose. Mainly,
in this case the wrong 'connect' backend counter is incremented instead
of the 'reuse' one. The flag is also used in http_return_srv_error and
may have an impact if a http server error is replied for this stream.
To fix this problem, the original purpose of the flag is restored by
setting it unconditionaly when a connection is reused. Additionally, a
new flag SF_SRV_REUSED_ANTICIPATED is created. This flag is set when the
connection is reused but the mux is not ready yet. For the timeout
handling on error, the request is retried immediately only if the stream
reused a connection without this newly anticipated flag.
This must be backported up to 2.1.
It is now possible to perform HTTP upgrades on a TCP stream from the
frontend side. To do so, a tcp-request content rule must be defined with the
switch-mode action, specifying the mode (for now, only http is supported)
and optionnaly the proto (h1 or h2).
This way it could be possible to set HTTP directives on a TCP frontend which
will only be evaluated if an upgrade is performed. This new way to perform
HTTP upgrades should replace progressively the old way, consisting to route
the request to an HTTP backend. And it should be also a good start to remove
all HTTP processing from tcp-request content rules.
This action is terminal, it stops the ruleset evaluation. It is only
available on proxy with the frontend capability.
The configuration manual has been updated accordingly.
It's been too short for quite a while now and is now full. It's still
time to extend it to 32-bits since we have room for this without
wasting any space, so we now gained 16 new bits for future flags.
The values were not reassigned just in case there would be a few
hidden u16 or short somewhere in which these flags are placed (as
it used to be the case with stream->pending_events).
The patch is tagged MEDIUM because this required to update the task's
process() prototype to use an int instead of a short, that's quite a
bunch of places.
The global streams list is exclusively used for "show sess", to look up
a stream to shut down, and for the hard-stop. Having all of them in a
single list is extremely expensive in terms of locking when using threads,
with performance losses as high as 7% having been observed just due to
this.
This patch makes the list per-thread, since there's no need to have a
global one in this situation. All call places just iterate over all
threads. The most "invasive" changes was in "show sess" where the end
of list needs to go back to the beginning of next thread's list until
the last thread is seen. For now the lock was maintained to keep the
code auditable but a next commit should get rid of it.
The observed performance gain here with only 4 threads is already 7%
(350krps -> 374krps).
The "show sess" CLI command currently lists all streams and needs to
stop at a given position to avoid dumping forever. Since 2.2 with
commit c6e7a1b8e ("MINOR: cli: make "show sess" stop at the last known
session"), a hack consists in unlinking the stream running the applet
and linking it again at the current end of the list, in order to serve
as a delimiter. But this forces the stream list to be global, which
affects scalability.
This patch introduces an epoch, which is a global 32-bit counter that
is incremented by the "show sess" command, and which is copied by newly
created streams. This way any stream can know whether any other one is
newer or older than itself.
For now it's only stored and not exploited.
The remaining contention on the server lock solely comes from
sess_change_server() which takes the lock to add and remove a
stream from the server's actconn list. This is both expensive
and pointless since we have mt-lists, and this list is only
used by the CLI's "shutdown server sessions" command!
Let's migrate to an mt-list and remove the need for this costly
lock. By doing so, the request rate increased by ~1.8%.
Allow the modification of the tunnel timeout on the stream side.
Use a new field in the stream for the tunnel timeout. It is initialized
by the tunnel timeout from backend unless it has already been set by a
set-timeout tunnel rule.
A dedicated expiration date is now used to apply the inspect-delay of the
tcp-request or tcp-response rulesets. Before, the analyse expiratation date was
used but it may also be updated by the lua (at least). So a lua script may
extend or reduce the inspect-delay by side effect. This is not expected. If it
becomes necessary, a specific function will be added to do this. Because, for
now, it is a bit confusing.
There are list definitions everywhere in the code, let's drop the need
for including list-t.h to declare them. The rest of the list manipulation
is huge however and not needed everywhere so using the list walking macros
still requires to include list.h.
This patch fixes all the leftovers from the include cleanup campaign. There
were not that many (~400 entries in ~150 files) but it was definitely worth
doing it as it revealed a few duplicates.
This one was not easy because it was embarking many includes with it,
which other files would automatically find. At least global.h, arg.h
and tools.h were identified. 93 total locations were identified, 8
additional includes had to be added.
In the rare files where it was possible to finalize the sorting of
includes by adjusting only one or two extra lines, it was done. But
all files would need to be rechecked and cleaned up now.
It was the last set of files in types/ and proto/ and these directories
must not be reused anymore.
