This patch removes <mux_state> field from quic_conn structure. The
purpose of this field was to indicate if MUX layer above quic_conn is
not yet initialized, active, or already released.
It became tedious to properly set it as initialization order of the
various quic_conn/conn/MUX layers now differ between the frontend and
backend sides, and also depending if 0-RTT is used or not. Recently, a
new change introduced in connect_server() will allow to initialize QUIC
MUX earlier if ALPN is cached on the server structure. This had another
level of complexity.
Thus, this patch removes <mux_state> field completely. Instead, a new
flag QUIC_FL_CONN_XPRT_CLOSED is defined. It is set at a single place
only on close XPRT callback invokation. It can be mixed with the new
utility functions qc_wait_for_conn()/qc_is_conn_ready() to determine the
status of conn/MUX layers now without an extra quic_conn field.
ssl_sock_ctx is a generic object used both on TCP/SSL and QUIC stacks.
Most notably it contains a <conn> member which is a pointer to struct
connection.
On QUIC frontend side, this member is always set to NULL. Indeed,
connection is only created after handshake completion. However, this has
changed for backend side, where the connection is instantiated prior to
its quic_conn counterpart. Thus, ssl_sock_ctx member would be set in
this case as a convenience for use later in qc_ssl_do_hanshake().
However, this method was unsafe as the connection can be released,
without resetting ssl_sock_ctx member. Thus, the previous patch fixes
this by using on <conn> member through the quic_conn instance which is
the proper way.
Thus, this patch resets ssl_sock_ctx <conn> member to NULL. This is
deemed the cleanest method as it ensures that both frontend and backend
sides must not use it anymore.
On backend side, a connection can be aborted and released prior to
handshake completion. This causes a crash in qc_ssl_do_hanshake() as
<conn> member of ssl_sock_ctx is not reset in this case.
To fix this, use <conn> member of quic_conn instead. This is safe as it
is properly set to NULL when a connection is released.
No impact on the frontend side as <conn> member is not accessed. Indeed,
in this case connection is most of the times allocated after handshake
completion.
No need to be backported.
In QUIC, TLS handshake messages such as ClientHello are encapsulated in
CRYPTO frames. Each QUIC implementation can split the content in several
frames of random sizes. In fact, this feature is now used by several
clients, based on chrome so-called "Chaos protection" mechanism :
https://quiche.googlesource.com/quiche/+/cb6b51054274cb2c939264faf34a1776e0a5bab7
To support this, haproxy uses a ncbuf storage to store received CRYPTO
frames before passing it to the SSL library. However, this storage
suffers from a limitation as gaps between two filled blocks cannot be
smaller than 8 bytes. Thus, depending on the size of received CRYPTO
frames and their order, ncbuf may not be sufficient. Over time, several
mechanisms were implemented in haproxy QUIC frames parsing to overcome
the ncbuf limitation.
However, reports recently highlight that with some clients haproxy is
not able to deal with CRYPTO frames reception. In particular, this is
the case with the latest ngtcp2 release, which implements a similar
chaos protection mechanism via the following patch. It also seems that
this impacts haproxy interaction with firefox.
commit 89c29fd8611d5e6d2f6b1f475c5e3494c376028c
Author: Tatsuhiro Tsujikawa <tatsuhiro.t@gmail.com>
Date: Mon Aug 4 22:48:06 2025 +0900
Crumble Client Initial CRYPTO (aka chaos protection)
To fix haproxy CRYPTO frames buffering once and for all, an alternative
non-contiguous buffer named ncbmbuf has been recently implemented. This
type does not suffer from gaps size limitation, albeit at the cost of a
small reduction in the size available for data storage.
Thus, the purpose of this current patch is to replace ncbuf with the
newer ncbmbuf for QUIC CRYPTO frames parsing. Now, ncbmb_add() is used
to buffer received frames which is guaranteed to suceed. The only
remaining case of error is if a received frame offset and length exceed
the ncbmbuf data storage, which would result in a CRYPTO_BUFFER_EXCEEDED
error code.
A notable behavior change when switching to ncbmbuf implementation is
that NCB_ADD_COMPARE mode cannot be used anymore during add. Instead,
crypto frame content received at a similar offset will be overwritten.
A final note regarding STREAM frames parsing. For now, it is considered
unnecessary to switch from ncbuf in this case. Indeed, QUIC clients does
not perform aggressive fragmentation for them. Keeping ncbuf ensure that
the data storage size is bigger than the equivalent ncbmbuf area.
This should fix github issue #3141.
This patch must be backported up to 2.6. It is first necessary to pick
the relevant commits for ncbmbuf implementation prior to it.
This bug impacts only the backends.
The ->conn (pointer to struct connection) member validity of the ssl_sock_ctx
struct was not checked before being dereferenced, leading to possible crashes
in qc_ssl_do_hanshake() during handshake.
This was reported by GH #3163 issue.
No need to backport because the QUIC backend support arrived with 3.3
The SSL counters were not handled at all for QUIC connections. This patch
implement ssl_sock_update_counters() extracting the code from ssl_sock.c
and call this function where applicable both in TLS/TCP and QUIC parts.
Must be backported as far as 2.8.
This index is used to retrieve the quic_conn object from its SSL object, the same
way the connection is retrieved from its SSL object for SSL/TCP connections.
This patch implements two helper functions to avoid the ugly code with such blocks:
#ifdef USE_QUIC
else if (qc) { .. }
#endif
Implement ssl_sock_get_listener() to return the listener from an SSL object.
Implement ssl_sock_get_conn() to return the connection from an SSL object
and optionally a pointer to the ssl_sock_ctx struct attached to the connections
or the quic_conns.
Use this functions where applicable:
- ssl_tlsext_ticket_key_cb() calls ssl_sock_get_listener()
- ssl_sock_infocbk() calls ssl_sock_get_conn()
- ssl_sock_msgcbk() calls ssl_sock_get_ssl_conn()
- ssl_sess_new_srv_cb() calls ssl_sock_get_conn()
- ssl_sock_srv_verifycbk() calls ssl_sock_get_conn()
Also modify qc_ssl_sess_init() to initialize the ssl_qc_app_data_index index for
the QUIC backends.
The ->li (struct listener *) member of quic_conn struct was replaced by a
->target (struct obj_type *) member by this commit:
MINOR: quic-be: get rid of ->li quic_conn member
to abstract the connection type (front or back) when implementing QUIC for the
backends. In these cases, ->target was a pointer to the ojb_type of a server
struct. This could not work with the dynamic servers contrary to the listeners
which are not dynamic.
This patch almost reverts the one mentioned above. ->target pointer to obj_type member
is replaced by ->li pointer to listener struct member. As the listener are not
dynamic, this is easy to do this. All one has to do is to replace the
objt_listener(qc->target) statement by qc->li where applicable.
For the backend connection, when needed, this is always qc->conn->target which is
used only when qc->conn is initialized. The only "problematic" case is for
quic_dgram_parse() which takes a pointer to an obj_type as third argument.
But this obj_type is only used to call quic_rx_pkt_parse(). Inside this function
it is used to access the proxy counters of the connection thanks to qc_counters().
So, this obj_type argument may be null for now on with this patch. This is the
reason why qc_counters() is modified to take this into consideration.
Mimic the same behavior as the one for SSL/TCP connetion to implement the
SSL session reuse.
Extract the code which try to reuse the SSL session for SSL/TCP connections
to implement ssl_sock_srv_try_reuse_sess().
Call this function from QUIC ->init() xprt callback (qc_conn_init()) as this
done for SSL/TCP connections.
When an SNI is set on a QUIC server line, ssl_sock_set_servername() is called
from connect_server() (backend.c). This leads some BUG_ON() to be triggered
because the CO_FL_WAIT_L6_CONN | CO_FL_SSL_WAIT_HS were not set. This must
be done into the ->init() xprt callback. This patch move the flags settings
from ->start() to ->init() callback.
Indeed, connect_server() calls these functions in this order:
->init(),
ssl_sock_set_servername() # => crash if CO_FL_WAIT_L6_CONN | CO_FL_SSL_WAIT_HS not set
->start()
Furthermore ssl_sock_set_servername() has a side effect to reset the SSL_SESSION
object (attached to SSL object) calling SSL_set_session(), leading to crashes as follows:
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `./haproxy -f quic_srv.cfg'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 tls_process_server_hello (s=0x560c259733b0, pkt=0x7fffac239f20)
at ssl/statem/statem_clnt.c:1624
1624 if (s->session->session_id_length > 0) {
[Current thread is 1 (Thread 0x7fc364e53dc0 (LWP 35514))]
(gdb) bt
#0 tls_process_server_hello (s=0x560c259733b0, pkt=0x7fffac239f20)
at ssl/statem/statem_clnt.c:1624
#1 0x00007fc36540fba4 in ossl_statem_client_process_message (s=0x560c259733b0,
pkt=0x7fffac239f20) at ssl/statem/statem_clnt.c:1042
#2 0x00007fc36540d028 in read_state_machine (s=0x560c259733b0) at ssl/statem/statem.c:646
#3 0x00007fc36540ca70 in state_machine (s=0x560c259733b0, server=0)
at ssl/statem/statem.c:439
#4 0x00007fc36540c576 in ossl_statem_connect (s=0x560c259733b0) at ssl/statem/statem.c:250
#5 0x00007fc3653f1698 in SSL_do_handshake (s=0x560c259733b0) at ssl/ssl_lib.c:3835
#6 0x0000560c22620327 in qc_ssl_do_hanshake (qc=qc@entry=0x560c25961f60,
ctx=ctx@entry=0x560c25963020) at src/quic_ssl.c:863
#7 0x0000560c226210be in qc_ssl_provide_quic_data (len=90, data=<optimized out>,
ctx=0x560c25963020, level=ssl_encryption_initial, ncbuf=0x560c2588bb18)
at src/quic_ssl.c:1071
#8 qc_ssl_provide_all_quic_data (qc=qc@entry=0x560c25961f60, ctx=0x560c25963020)
at src/quic_ssl.c:1123
#9 0x0000560c2260ca5f in quic_conn_io_cb (t=0x560c25962f80, context=0x560c25961f60,
state=<optimized out>) at src/quic_conn.c:791
#10 0x0000560c228255ed in run_tasks_from_lists (budgets=<optimized out>) at src/task.c:648
#11 0x0000560c22825f7a in process_runnable_tasks () at src/task.c:889
#12 0x0000560c22793dc7 in run_poll_loop () at src/haproxy.c:2836
#13 0x0000560c22794481 in run_thread_poll_loop (data=<optimized out>) at src/haproxy.c:3056
#14 0x0000560c2259082d in main (argc=<optimized out>, argv=<optimized out>)
at src/haproxy.c:3667
<s> is the SSL object, and <s->session> is the SSL_SESSION object.
For the client, this is the first call do SSL_do_handshake() which initializes this
SSL_SESSION object from ->init() xpt callback. Then it is reset by
ssl_sock_set_servername(), then tls_process_server_hello() TLS stack is called with
NULL value for s->session when receiving the ServerHello TLS message.
To fix this, simply move the first call to SSL_do_handshake to ->start xprt call
back (qc_xprt_start()).
No need to backport.
This patch follows this previous bug fix:
BUG/MINOR: quic: reorder fragmented RX CRYPTO frames by their offsets
where a ebtree node has been added to qf_crypto struct. It has the same
meaning and type as ->offset_node.key field with ->offset_node an eb64tree node.
This patch simply removes ->offset which is no more useful.
This patch should be easily backported as far as 2.6 as the one mentioned above
to ease any further backport to come.
This issue was reported in GH #3071 by @famfo where a wireshark capture
reveals that some handshake could not complete after having received
two Initial packets. This could happen when the packets were parsed
in two times, calling qc_ssl_provide_all_quic_data() two times.
This is due to crypto data stream counter which was incremented two times
from qc_ssl_provide_all_quic_data() (see cstream->rx.offset += data
statement around line 1223 in quic_ssl.c). One time by the callback
which "receives" the crypto data, and on time by qc_ssl_provide_all_quic_data().
Then when parsing the second crypto data frame, the parser detected
that the crypto were already provided.
To fix this, one could comment the code which increment the crypto data
stream counter by <data>. That said, when using the OpenSSL 3.5 QUIC API
one should not modified the crypto data stream outside of the OpenSSL 3.5
QUIC API.
So, this patch stop calling qc_ssl_provide_all_quic_data() and
qc_ssl_provide_quic_data() and only calls qc_ssl_do_hanshake() after
having received some crypto data. In addition to this, as these functions
are no more called when building haproxy against OpenSSL 3.5, this patch
disable their compilations (with #ifndef HAVE_OPENSSL_QUIC).
This patch depends on this previous one:
MINOR: quic: implement qc_ssl_do_hanshake()
Thank you to @famto for this report.
Must be backported to 3.2.
This will make the pools size and alignment automatically inherit
the type declaration. It was done like this:
sed -i -e 's:DECLARE_POOL(\([^,]*,[^,]*,\s*\)sizeof(\([^)]*\))):DECLARE_TYPED_POOL(\1\2):g' $(git grep -lw DECLARE_POOL src addons)
sed -i -e 's:DECLARE_STATIC_POOL(\([^,]*,[^,]*,\s*\)sizeof(\([^)]*\))):DECLARE_STATIC_TYPED_POOL(\1\2):g' $(git grep -lw DECLARE_STATIC_POOL src addons)
81 replacements were made. The only remaining ones are those which set
their own size without depending on a structure. The few ones with an
extra size were manually handled.
It also means that the requested alignments are now checked against the
type's. Given that none is specified for now, no issue is reported.
It was verified with "show pools detailed" that the definitions are
exactly the same, and that the binaries are similar.
Previously quic_conn <target> member was used to determine if quic_conn
was used on the frontend (as server) or backend side (as client). A new
helper function can now be used to directly check flag
QUIC_FL_CONN_IS_BACK.
This reduces the dependency between quic_conn and their relative
listener/server instances.
Replace all calls to qc_is_listener() (resp. !qc_is_listener()) by calls to
objt_listener() (resp. objt_server()).
Remove qc_is_listener() implement and QUIC_FL_CONN_LISTENER the flag it
relied on.
Revert this patch which is no more useful since OpenSSL 3.5.1 to remove the
QUIC server callback restoration after SSL context switch:
MINOR: quic: OpenSSL 3.5 internal QUIC custom extension for transport parameters reset
It was required for 3.5.0. That said, there was no CI for OpenSSL 3.5 at the date
of this commit. The CI recently revealed that the QUIC server side could crash
during QUIC reg tests just after having restored the callbacks as implemented by
the commit above.
Also revert this commit which is no more useful because it arrived with the commit
above:
BUG/MEDIUM: quic: SSL/TCP handshake failures with OpenSSL 3.
Must be backported to 3.2.
This bug impacts both QUIC backends and frontends with OpenSSL 3.5 as QUIC API.
The connections to a haproxy QUIC listener from a haproxy QUIC backend could not
work at all without HelloRetryRequest TLS messages emitted by the backend
asking the QUIC client to restart the handshake followed by TLS alerts:
conn. @(nil) OpenSSL error[0xa000098] read_state_machine: excessive message size
Furthermore, the Initial CRYPTO data sent by the client were big (about two 1252 bytes
packets) (ClientHello TLS message). After analyzing the packets a key_share extension
with <unknown> as value was long (more that 1Ko). This extension is in relation with
the groups but does not belong to the groups supported by QUIC.
That said such connections could work with ngtcp2 as backend built against the same
OSSL TLS stack API but with a HelloRetryRequest.
ngtcp2 always set the QUIC default cipher suites and group, for all the stacks it
supports as implemented by this patch.
So this patch configures both QUIC backend and frontend cipher suites and groups
calling SSL_CTX_set_ciphersuites() and SSL_CTX_set1_groups_list() with the correct
argument, except for SSL_CTX_set1_groups_list() which fails with QUIC TLS for
a unknown reason at this time.
The call to SSL_CTX_set_options() is useless from ssl_quic_initial_ctx() for the QUIC
clients. One relies on ssl_sock_prepare_srv_ssl_ctx() to set them for now on.
This patch is effective for all the supported stacks without impact for AWS-LC,
and QUIC TLS and fixes the connections for haproxy QUIC frontend and backends
when builts against OpenSSL 3.5 QUIC API).
A new define HAVE_OPENSSL_QUICTLS has been added to openssl-compat.h to distinguish
the QUIC TLS stack.
Must be backported to 3.2.
This bug arrived with this commit:
MINOR: quic: OpenSSL 3.5 internal QUIC custom extension for transport parameters reset
To make QUIC connection succeed with OpenSSL 3.5 API, a call to quic_ssl_set_tls_cbs()
was needed from several callback which call SSL_set_SSL_CTX(). This has as side effect
to set the QUIC callbacks used by the OpenSSL 3.5 API.
But quic_ssl_set_tls_cbs() was also called for TCP sessions leading the SSL stack
to run QUIC code, if the QUIC support is enabled.
To fix this, simply ignore the TCP connections inspecting the <ssl_qc_app_data_index>
index value which is NULL for such connections.
Must be backported to 3.2.
This patch is OpenSSL3.5 QUIC API specific. It fixes
OSSL_FUNC_SSL_QUIC_TLS_got_transport_params_fn() callback (see man(3) SSL_set_quic_tls_cb).
The role of this callback is to store the transport parameters received by the peer.
At this time it is never used by QUIC listeners because there is another callback
which is used to store the transport parameters. This latter callback is not specific
to OpenSSL 3.5 QUIC API. As far as I know, the TLS stack call only one time
one of the callbacks which have been set to receive and store the transport parameters.
That said, OSSL_FUNC_SSL_QUIC_TLS_got_transport_params_fn() is called for QUIC
backends to store the server transport parameters.
qc_ssl_set_quic_transport_params() is useless is this callback. It is dedicated
to store the local tranport parameters (which are sent to the peer). Furthermore
<server> second parameter of quic_transport_params_store() must be 0 for a listener
(or QUIC server) whichs call it, denoting it does not receive the transport parameters
of a QUIC server. It must be 1 for a QUIC backend (a QUIC client which receives
the transport parameter of a QUIC server).
Must be backported to 3.2.
QUIC traces in ssl_quic_srv_new_ssl_ctx() are problematic as this
function is called early during startup. If activating traces via -dt
command-line argument, a crash occurs due to stderr sink not yet
available.
Thus, traces from ssl_quic_srv_new_ssl_ctx() are simply removed.
No backport needed.
This commit added a "err" C label reachable only with USE_QUIC_OPENSSL_COMPAT:
MINOR: quic-be: Missing callbacks initializations (USE_QUIC_OPENSSL_COMPAT)
leading coverity to warn this:
*** CID 1611481: Control flow issues (UNREACHABLE)
/src/quic_ssl.c: 802 in ssl_quic_srv_new_ssl_ctx()
796 goto err;
797 #endif
798
799 leave:
800 TRACE_LEAVE(QUIC_EV_CONN_NEW);
801 return ctx;
>>> CID 1611481: Control flow issues (UNREACHABLE)
>>> This code cannot be reached: "err:
SSL_CTX_free(ctx);".
802 err:
803 SSL_CTX_free(ctx);
804 ctx = NULL;
805 TRACE_DEVEL("leaving on error", QUIC_EV_CONN_NEW);
806 goto leave;
807 }
The less intrusive (without #ifdef) way to fix this it to add a "goto err"
statement from the code part which is reachable without USE_QUIC_OPENSSL_COMPAT.
Thank you to @chipitsine for having reported this issue in GH #3003.
This commit is the second and final step to initiate QUIC MUX on the
backend side. On handshake completion, MUX is woken up just after its
creation. This step is necessary to notify the stream layer, via the QCS
instance pre-initialized on MUX init, so that the transfer can be
resumed.
This mode of operation is similar to TCP stack when TLS+ALPN are used,
which forces MUX initialization to be delayed after handshake
completion.
On backend side, MUX is instantiated after QUIC handshake completion.
This step is performed via qc_ssl_provide_quic_data(). First, connection
flags for handshake completion are resetted. Then, MUX is instantiated
via conn_create_mux() function.
Replace ->li quic_conn pointer to struct listener member by ->target which is
an object type enum and adapt the code.
Use __objt_(listener|server)() where the object type is known. Typically
this is were the code which is specific to one connection type (frontend/backend).
Remove <server> parameter passed to qc_new_conn(). It is redundant with the
<target> parameter.
GSO is not supported at this time for QUIC backend. qc_prep_pkts() is modified
to prevent it from building more than an MTU. This has as consequence to prevent
qc_send_ppkts() to use GSO.
ssl_clienthello.c code is run only by listeners. This is why __objt_listener()
is used in place of ->li.
Disable the code around SSL_get_peer_quic_transport_params() as this was done
for USE_QUIC_OPENSSL_COMPAT because SSL_get_peer_quic_transport_params() is not
defined by OpenSSL 3.5 QUIC API.
quic_tls_compat_init() function is called from OpenSSL QUIC compatibility module
(USE_QUIC_OPENSSL_COMPAT) to initialize the keylog callback and the callback
which stores the QUIC transport parameters as a TLS extensions into the stack.
These callbacks must also be initialized for QUIC backends.
This is done from TLS secrets derivation callback at Application level (the last
encryption level) calling SSL_get_peer_quic_transport_params() to have an access
to the TLS transport paremeters extension embedded into the Server Hello TLS message.
Then, quic_transport_params_store() is called to store a decoded version of
these transport parameters.
For connection to QUIC servers, this patch modifies the moment where the I/O
handler callback is switched to quic_conn_app_io_cb(). This is no more
done as for listener just after the handshake has completed but just after
it has been confirmed.
The initialization of <ssl_app_data_index> SSL user data index is required
to make all the SSL sessions to QUIC servers work as this is done for TCP
servers. The conn object notably retrieve for SSL callback which are
server specific (e.g. ssl_sess_new_srv_cb()).
Modify qc_alloc_ssl_sock_ctx() to pass the connection object as parameter. It is
NULL for a QUIC listener, not NULL for a QUIC server. This connection object is
set as value for ->conn quic_conn struct member. Initialise the SSL session object from
this function for QUIC servers.
qc_ssl_set_quic_transport_params() is also modified to pass the SSL object as parameter.
This is the unique parameter this function needs. <qc> parameter is used only for
the trace.
SSL_do_handshake() must be calle as soon as the SSL object is initialized for
the QUIC backend connection. This triggers the TLS CRYPTO data delivery.
tasklet_wakeup() is also called to send asap these CRYPTO data.
Modify the QUIC_EV_CONN_NEW event trace to dump the potential errors returned by
SSL_do_handshake().
qc_alloc_ssl_sock_ctx() allocates an SSL_CTX object for each connection. It also
allocates an SSL object. When this function failed, it freed only the SSL_CTX object.
The correct way to free both of them is to call qc_free_ssl_sock_ctx().
Must be backported as far as 2.6.
For an unidentified reason, SSL_do_hanshake() succeeds at its first call when 0-RTT
is enabled for the connection. This behavior looks very similar by the one encountered
by AWS-LC stack. That said, it was documented by AWS-LC. This issue leads the
connection to stop sending handshake packets after having release the handshake
encryption level. In fact, no handshake packets could even been sent leading
the handshake to always fail.
To fix this, this patch simulates a "handshake in progress" state waiting
for the application level read secret to be established by the TLS stack.
This may happen only after the QUIC listener has completed/confirmed the handshake
upon handshake CRYPTO data receipt from the peer.
The quic_conn struct is modified for two reasons. The first one is to store
the encoded version of the local tranport parameter as this is done for
USE_QUIC_OPENSSL_COMPAT. Indeed, the local transport parameter "should remain
valid until after the parameters have been sent" as mentionned by
SSL_set_quic_tls_cbs(3) manual. In our case, the buffer is a static buffer
attached to the quic_conn object. qc_ssl_set_quic_transport_params() function
whose role is to call SSL_set_tls_quic_transport_params() (aliased by
SSL_set_quic_transport_params() to set these local tranport parameter into
the TLS stack from the buffer attached to the quic_conn struct.
The second quic_conn struct modification is the addition of the new ->prot_level
(SSL protection level) member added to the quic_conn struct to store "the most
recent write encryption level set via the OSSL_FUNC_SSL_QUIC_TLS_yield_secret_fn
callback (if it has been called)" as mentionned by SSL_set_quic_tls_cbs(3) manual.
This patches finally implements the five remaining callacks to make the haproxy
QUIC implementation work.
OSSL_FUNC_SSL_QUIC_TLS_crypto_send_fn() (ha_quic_ossl_crypto_send) is easy to
implement. It calls ha_quic_add_handshake_data() after having converted
qc->prot_level TLS protection level value to the correct ssl_encryption_level_t
(boringSSL API/quictls) value.
OSSL_FUNC_SSL_QUIC_TLS_crypto_recv_rcd_fn() (ha_quic_ossl_crypto_recv_rcd())
provide the non-contiguous addresses to the TLS stack, without releasing
them.
OSSL_FUNC_SSL_QUIC_TLS_crypto_release_rcd_fn() (ha_quic_ossl_crypto_release_rcd())
release these non-contiguous buffer relying on the fact that the list of
encryption level (qc->qel_list) is correctly ordered by SSL protection level
secret establishements order (by the TLS stack).
OSSL_FUNC_SSL_QUIC_TLS_yield_secret_fn() (ha_quic_ossl_got_transport_params())
is a simple wrapping function over ha_quic_set_encryption_secrets() which is used
by boringSSL/quictls API.
OSSL_FUNC_SSL_QUIC_TLS_got_transport_params_fn() (ha_quic_ossl_got_transport_params())
role is to store the peer received transport parameters. It simply calls
quic_transport_params_store() and set them into the TLS stack calling
qc_ssl_set_quic_transport_params().
Also add some comments for all the OpenSSL 3.5 QUIC API callbacks.
This patch have no impact on the other use of QUIC API provided by the others TLS
stacks.
This patch allows the use of the new OpenSSL 3.5.0 QUIC TLS API when it is
available and detected at compilation time. The detection relies on the presence of the
OSSL_FUNC_SSL_QUIC_TLS_CRYPTO_SEND macro from openssl-compat.h. Indeed this
macro is defined by OpenSSL since 3.5.0 version. It is not defined by quictls.
This helps in distinguishing these two TLS stacks. When the detection succeeds,
HAVE_OPENSSL_QUIC is also defined by openssl-compat.h. Then, this is this new macro
which is used to detect the availability of the new OpenSSL 3.5.0 QUIC TLS API.
Note that this detection is done only if USE_QUIC_OPENSSL_COMPAT is not asked.
So, USE_QUIC_OPENSSL_COMPAT and HAVE_OPENSSL_QUIC are exclusive.
At the same location, from openssl-compat.h, ssl_encryption_level_t enum is
defined. This enum was defined by quictls and expansively used by the haproxy
QUIC implementation. SSL_set_quic_transport_params() is replaced by
SSL_set_quic_tls_transport_params. SSL_set_quic_early_data_enabled() (quictls) is also replaced
by SSL_set_quic_tls_early_data_enabled() (OpenSSL). SSL_quic_read_level() (quictls)
is not defined by OpenSSL. It is only used by the traces to log the current
TLS stack decryption level (read). A macro makes it return -1 which is an
usused values.
The most of the differences between quictls and OpenSSL QUI APIs are in quic_ssl.c
where some callbacks must be defined for these two APIs. This is why this
patch modifies quic_ssl.c to define an array of OSSL_DISPATCH structs: <ha_quic_dispatch>.
Each element of this arry defines a callback. So, this patch implements these
six callabcks:
- ha_quic_ossl_crypto_send()
- ha_quic_ossl_crypto_recv_rcd()
- ha_quic_ossl_crypto_release_rcd()
- ha_quic_ossl_yield_secret()
- ha_quic_ossl_got_transport_params() and
- ha_quic_ossl_alert().
But at this time, these implementations which must return an int return 0 interpreted
as a failure by the OpenSSL QUIC API, except for ha_quic_ossl_alert() which
is implemented the same was as for quictls. The five remaining functions above
will be implemented by the next patches to come.
ha_quic_set_encryption_secrets() and ha_quic_add_handshake_data() have been moved
to be defined for both quictls and OpenSSL QUIC API.
These callbacks are attached to the SSL objects (sessions) calling qc_ssl_set_cbs()
new function. This latter callback the correct function to attached the correct
callbacks to the SSL objects (defined by <ha_quic_method> for quictls, and
<ha_quic_dispatch> for OpenSSL).
The calls to SSL_provide_quic_data() and SSL_process_quic_post_handshake()
have been also disabled. These functions are not defined by OpenSSL QUIC API.
At this time, the functions which call them are still defined when HAVE_OPENSSL_QUIC
is defined.
There were no traces to diagnose qc_ssl_sess_init() failures from QUIC traces.
This patch add calls to TRACE_DEVEL() into qc_ssl_sess_init() and its caller
(qc_alloc_ssl_sock_ctx()). This was useful at least to diagnose SSL context
initialization failures when porting QUIC to the new OpenSSL 3.5 QUIC API.
Should be easily backported as far as 2.6.
This code is there from QUIC implementation start. It was supposed to
initialize <ha_quic_meth> as a BIO_METHOD static object. But this
BIO_METHOD is not used at all!
Should be backported as far as 2.6 to help integrate the next patches to come.
Extend API used for QUIC transport parameter decoding. This is done via
the introduction of a dedicated enum to report the various error
condition detected. No functional change should occur with this patch,
as the only returned code is QUIC_TP_DEC_ERR_TRUNC, which results in the
connection closure via a TLS alert.
This patch will be necessary to properly reject transport parameters
with the proper CONNECTION_CLOSE error code. As such, it should be
backported up to 2.6 with the following series.
This issue came with this commit:
f627b92 BUG/MEDIUM: quic: always validate sender address on 0-RTT
and could be easily reproduced with picoquic QUIC client with -Q option
which splits a big ClientHello TLS message into two Initial datagrams.
A second condition must be fulfilled to reprodue this issue: picoquic
must not send the token provided by haproxy (NEW_TOKEN). To do that,
haproxy must be patched to prevent it to send such tokens.
Under these conditions, if haproxy has enough time to reply to the first Initial
datagrams, when it receives the second Initial datagram it sends a Retry paquet.
Then the client ignores the Retry paquet as mentionned by RFC 9000:
17.2.5.2. Handling a Retry Packet
A client MUST accept and process at most one Retry packet for each connection
attempt. After the client has received and processed an Initial or Retry packet
from the server, it MUST discard any subsequent Retry packets that it receives.
On its side, haproxy has closed the connection. When it receives the second
Initial datagram, it open a new connection but with Initial packets it
cannot decrypt (wrong ODCID) leaving the client without response.
To fix this, as the aim of the token (NEW_TOKEN) sent by haproxy is to validate
the peer address, in place of closing the connection when no token was received
for a 0RTT connection, one leaves this validation to the handshake process.
Indeed, the peer adress is validated during the handshake when a valid handshake
packet is received by the listener. But as one does not want haproxy to process
0RTT data when no token was received, one does not accept the connection before
the successful handshake completion. In addition to this, the 0RTT packets
are not released after successful handshake completion when no token was received
to leave a chance to haproxy to process these 0RTT data in such case (see
quic_conn_io_cb()).
Must be backported as far as 2.9.
This bug follows this patch:
MINOR: quic: Add trace for QUIC_EV_CONN_IO_CB event.
where a new third variable was added to be dumped from QUIC_EV_CONN_IO_CB trace
event. The quic_trace() code did not reveal there was already another variable
passed as third argument but not dumped. This leaded to crash when dereferencing
a point to an int in place of a point to an SSL object.
This issue was reproduced only by handshakecorruption aws-lc interop test with
s2n-quic as client.
Note that this patch must be backported with this one:
BUG/MEDIUM: quic: always validate sender address on 0-RTT
which depends on the commit mentionned above.
It has been reported by Wedl Michael, a student at the University of Applied
Sciences St. Poelten, a potential vulnerability into haproxy as described below.
An attacker could have obtained a TLS session ticket after having established
a connection to an haproxy QUIC listener, using its real IP address. The
attacker has not even to send a application level request (HTTP3). Then
the attacker could open a 0-RTT session with a spoofed IP address
trusted by the QUIC listen to bypass IP allow/block list and send HTTP3 requests.
To mitigate this vulnerability, one decided to use a token which can be provided
to the client each time it successfully managed to connect to haproxy. These
tokens may be reused for future connections to validate the address/path of the
remote peer as this is done with the Retry token which is used for the current
connection, not the next one. Such tokens are transported by NEW_TOKEN frames
which was not used at this time by haproxy.
So, each time a client connect to an haproxy QUIC listener with 0-RTT
enabled, it is provided with such a token which can be reused for the
next 0-RTT session. If no such a token is presented by the client,
haproxy checks if the session is a 0-RTT one, so with early-data presented
by the client. Contrary to the Retry token, the decision to refuse the
connection is made only when the TLS stack has been provided with
enough early-data from the Initial ClientHello TLS message and when
these data have been accepted. Hopefully, this event arrives fast enough
to allow haproxy to kill the connection if some early-data have been accepted
without token presented by the client.
quic_build_post_handshake_frames() has been modified to build a NEW_TOKEN
frame with this newly implemented token to be transported inside.
quic_tls_derive_retry_token_secret() was renamed to quic_do_tls_derive_token_secre()
and modified to be reused and derive the secret for the new token implementation.
quic_token_validate() has been implemented to validate both the Retry and
the new token implemented by this patch. When this is a non-retry token
which could not be validated, the datagram received is marked as requiring
a Retry packet to be sent, and no connection is created.
When the Initial packet does not embed any non-retry token and if 0-RTT is enabled
the connection is marked with this new flag: QUIC_FL_CONN_NO_TOKEN_RCVD. As soon
as the TLS stack detects that some early-data have been provided and accepted by
the client, the connection is marked to be killed (QUIC_FL_CONN_TO_KILL) from
ha_quic_add_handshake_data(). This is done calling qc_ssl_eary_data_accepted()
new function. The secret TLS handshake is interrupted as soon as possible returnin
0 from ha_quic_add_handshake_data(). The connection is also marked as
requiring a Retry packet to be sent (QUIC_FL_CONN_SEND_RETRY) from
ha_quic_add_handshake_data(). The the handshake I/O handler (quic_conn_io_cb())
knows how to behave: kill the connection after having sent a Retry packet.
About TLS stack compatibility, this patch is supported by aws-lc. It is
disabled for wolfssl which does not support 0-RTT at this time thanks
to HAVE_SSL_0RTT_QUIC.
This patch depends on these commits:
MINOR: quic: Add trace for QUIC_EV_CONN_IO_CB event.
MINOR: quic: Implement qc_ssl_eary_data_accepted().
MINOR: quic: Modify NEW_TOKEN frame structure (qf_new_token struct)
BUG/MINOR: quic: Missing incrementation in NEW_TOKEN frame builder
MINOR: quic: Token for future connections implementation.
MINOR: quic: Implement quic_tls_derive_token_secret().
MINOR: tools: Implement ipaddrcpy().
Must be backported as far as 2.6.
Revert patch fcc8255 "MINOR: ssl_sock: Early data disabled during
SSL_CTX switching (aws-lc)". The patch was done in the wrong callback
which is never built for AWS-LC, and applies options on the SSL_CTX
instead of the SSL, which should never be done elsewhere than in the
configuration parsing.
This was probably triggered by successfully linking haproxy against
AWS-LC without using USE_OPENSSL_AWSLC.
The patch also reintroduced SSL_CTX_set_early_data_enabled() in the
ssl_quic_initial_ctx() and ssl_sock_initial_ctx(). So the initial_ctx
does have the right setting, but it still needs to be applied to the
selected SSL_CTX in the clienthello, because we need it on the selected
SSL_CTX.
Must be backported to 3.0. (ssl_clienthello.c part was in ssl_sock.c)
Some of the crypto functions used for headers protection in QUIC are
named with an "aes" name even thought they are not used for AES
encryption only.
This patch renames these "aes" to "hp" so it is clearer.
AWS-LC does not support the SSL_CTX_set_client_hello_cb() function from
OpenSSL which allows to analyze ciphers and signatures algorithm of the
ClientHello. However it supports the SSL_CTX_set_select_certificate_cb()
which allows the same thing but was the implementation from the
boringSSL side.
This patch uses the SSL_CTX_set_select_certificate_cb() as well as the
SSL_early_callback_ctx_extension_get() function to get the signature
algorithms.
This was successfully tested with openssl s_client as well as
testssl.sh.
This should allow to enable more reg-tests that depend on certificate
selection.
Require at least AWS-LC 1.22.0.
At least 3.9.0 version of libressl TLS stack does not behave as others stacks like quictls which
make SSL_do_handshake() return an error when no cipher could be negotiated
in addition to emit a TLS alert(0x28). This is the case when TLS_AES_128_CCM_SHA256
is forced as TLS1.3 cipher from the client side. This make haproxy enter a code
path which leads to a crash as follows:
[Switching to Thread 0x7ffff76b9640 (LWP 23902)]
0x0000000000487627 in quic_tls_key_update (qc=qc@entry=0x7ffff00371f0) at src/quic_tls.c:910
910 struct quic_kp_trace kp_trace = {
(gdb) list
905 {
906 struct quic_tls_ctx *tls_ctx = &qc->ael->tls_ctx;
907 struct quic_tls_secrets *rx = &tls_ctx->rx;
908 struct quic_tls_secrets *tx = &tls_ctx->tx;
909 /* Used only for the traces */
910 struct quic_kp_trace kp_trace = {
911 .rx_sec = rx->secret,
912 .rx_seclen = rx->secretlen,
913 .tx_sec = tx->secret,
914 .tx_seclen = tx->secretlen,
(gdb) p qc
$1 = (struct quic_conn *) 0x7ffff00371f0
(gdb) p qc->ael
$2 = (struct quic_enc_level *) 0x0
(gdb) bt
#0 0x0000000000487627 in quic_tls_key_update (qc=qc@entry=0x7ffff00371f0) at src/quic_tls.c:910
#1 0x000000000049bca9 in qc_ssl_provide_quic_data (len=268, data=<optimized out>, ctx=0x7ffff0047f80, level=<optimized out>, ncbuf=<optimized out>) at src/quic_ssl.c:617
#2 qc_ssl_provide_all_quic_data (qc=qc@entry=0x7ffff00371f0, ctx=0x7ffff0047f80) at src/quic_ssl.c:688
#3 0x00000000004683a7 in quic_conn_io_cb (t=0x7ffff0047f30, context=0x7ffff00371f0, state=<optimized out>) at src/quic_conn.c:760
#4 0x000000000063cd9c in run_tasks_from_lists (budgets=budgets@entry=0x7ffff76961f0) at src/task.c:596
#5 0x000000000063d934 in process_runnable_tasks () at src/task.c:876
#6 0x0000000000600508 in run_poll_loop () at src/haproxy.c:3073
#7 0x0000000000600b67 in run_thread_poll_loop (data=<optimized out>) at src/haproxy.c:3287
#8 0x00007ffff7f6ae45 in start_thread () from /lib64/libpthread.so.0
#9 0x00007ffff78254af in clone () from /lib64/libc.so.6
When a TLS alert is emitted, haproxy calls quic_set_connection_close() which sets
QUIC_FL_CONN_IMMEDIATE_CLOSE connection flag. This is this flag which is tested
by this patch to make the handshake fail even if SSL_do_handshake() does not
return an error. This test is specific to libressl and never run with
others TLS stack.
Thank you to @lgv5 and @botovq for having reported this issue in GH #2569.
Must be backported as far as 2.6.
The new "ssl-security-level" option allows one to change the OpenSSL
security level without having to change the openssl.cnf global file of
your distribution. This directives applies on every SSL_CTX context.
People sometimes change their security level directly in the ciphers
directive, however there are some cases when the security level change
is not applied in the right order (for example when applying a DH
param).
Before this patch, it was to possible to trick by using a specific
openssl.cnf file and start haproxy this way:
OPENSSL_CONF=./openssl.cnf ./haproxy -f bug-2468.cfg
Values for the security level can be found there:
https://www.openssl.org/docs/man1.1.1/man3/SSL_CTX_set_security_level.html
This was discussed in github issue #2468.
