Plenty of includes were present there only for struct pointers resulting
in them being used from many other places. The LoC reduced again by more
than 1% by cleaning this.
This patch replaces all advanced data type aliases on
stktable_data_cast calls by standard types.
This way we could call the same stktable_data_cast
regardless of the used advanced data type as long they
are using the same std type.
It also removes all the advanced data type aliases.
This basically undoes the API changes that were performed by commit
0274286dd ("BUG/MAJOR: server: fix deadlock when changing maxconn via
agent-check") to address the deadlock issue: since process_srv_queue()
doesn't use the server lock anymore, it doesn't need the "server_locked"
argument, so let's get rid of it before it gets used again.
This reverts commit c83e45e9b001591633188a480a896c935d3c9625.
The recent changes since 5304669e1 MEDIUM: queue: make
pendconn_process_next_strm() only return the pendconn opened a tiny race
condition between stream_free() and process_srv_queue(), as the pendconn
is accessed outside of the lock, possibly while it's being freed. A
different approach is required.
This basically undoes the API changes that were performed by commit
0274286dd ("BUG/MAJOR: server: fix deadlock when changing maxconn via
agent-check") to address the deadlock issue: since process_srv_queue()
doesn't use the server lock anymore, it doesn't need the "server_locked"
argument, so let's get rid of it before it gets used again.
The server_parse_maxconn_change_request locks the server lock. However,
this function can be called via agent-checks or lua code which already
lock it. This bug has been introduced by the following commit :
commit 79a88ba3d09f7e2b73ae27cb5d24cc087a548fa6
BUG/MAJOR: server: prevent deadlock when using 'set maxconn server'
This commit tried to fix another deadlock with can occur because
previoulsy server_parse_maxconn_change_request requires the server lock
to be held. However, it may call internally process_srv_queue which also
locks the server lock. The locking policy has thus been updated. The fix
is functional for the CLI 'set maxconn' but fails to address the
agent-check / lua counterparts.
This new issue is fixed in two steps :
- changes from the above commit have been reverted. This means that
server_parse_maxconn_change_request must again be called with the
server lock.
- to counter the deadlock fixed by the above commit, process_srv_queue
now takes an argument to render the server locking optional if the
caller already held it. This is only used by
server_parse_maxconn_change_request.
The above commit was subject to backport up to 1.8. Thus this commit
must be backported in every release where it is already present.
The current "ADD" vs "ADDQ" is confusing because when thinking in terms
of appending at the end of a list, "ADD" naturally comes to mind, but
here it does the opposite, it inserts. Several times already it's been
incorrectly used where ADDQ was expected, the latest of which was a
fortunate accident explained in 6fa922562 ("CLEANUP: stream: explain
why we queue the stream at the head of the server list").
Let's use more explicit (but slightly longer) names now:
LIST_ADD -> LIST_INSERT
LIST_ADDQ -> LIST_APPEND
LIST_ADDED -> LIST_INLIST
LIST_DEL -> LIST_DELETE
The same is true for MT_LISTs, including their "TRY" variant.
LIST_DEL_INIT keeps its short name to encourage to use it instead of the
lazier LIST_DELETE which is often less safe.
The change is large (~674 non-comment entries) but is mechanical enough
to remain safe. No permutation was performed, so any out-of-tree code
can easily map older names to new ones.
The list doc was updated.
This patch replaces roughly all occurrences of an HA_ATOMIC_ADD(&foo, 1)
or HA_ATOMIC_SUB(&foo, 1) with the equivalent HA_ATOMIC_INC(&foo) and
HA_ATOMIC_DEC(&foo) respectively. These are 507 changes over 45 files.
It is now possible to perform HTTP upgrades on a TCP stream from the
frontend side. To do so, a tcp-request content rule must be defined with the
switch-mode action, specifying the mode (for now, only http is supported)
and optionnaly the proto (h1 or h2).
This way it could be possible to set HTTP directives on a TCP frontend which
will only be evaluated if an upgrade is performed. This new way to perform
HTTP upgrades should replace progressively the old way, consisting to route
the request to an HTTP backend. And it should be also a good start to remove
all HTTP processing from tcp-request content rules.
This action is terminal, it stops the ruleset evaluation. It is only
available on proxy with the frontend capability.
The configuration manual has been updated accordingly.
The code responsible to perform an HTTP upgrade from a TCP stream is moved
in a dedicated function, stream_set_http_mode().
The stream_set_backend() function is slightly updated, especially to
correctly set the request analysers.
These are some leftovers from the ancient code where they were still
called sessions, but these areas in the code remain confusing due to
this naming. They were now called "strm" which will not even affect
indenting nor alignment.
The default proxy was passed as a variable to all parsers instead of a
const, which is not without risk, especially when some timeout parsers used
to make some int pointers point to the default values for comparisons. We
want to be certain that none of these parsers will modify the defaults
sections by accident, so it's important to mark this proxy as const.
This patch touches all occurrences found (89).
The actconns list creates massive contention on low server counts because
it's in fact a list of streams using a server, all threads compete on the
list's head and it's still possible to see some watchdog panics on 48
threads under extreme contention with 47 threads trying to add and one
thread trying to delete.
Moving this list per thread is trivial because it's only used by
srv_shutdown_streams(), which simply required to iterate over the list.
The field was renamed to "streams" as it's really a list of streams
rather than a list of connections.
It's been too short for quite a while now and is now full. It's still
time to extend it to 32-bits since we have room for this without
wasting any space, so we now gained 16 new bits for future flags.
The values were not reassigned just in case there would be a few
hidden u16 or short somewhere in which these flags are placed (as
it used to be the case with stream->pending_events).
The patch is tagged MEDIUM because this required to update the task's
process() prototype to use an int instead of a short, that's quite a
bunch of places.
In stream_add_srv_conn() MT_LIST_ADD() is used instead of MT_LIST_ADDQ(),
resulting in the stream being queued at the end of the server list. This
has no particular effect since we cannot dump the streams on a server,
and this is only used by "shutdown sessions" on a server. But it also
turns out to be significantly faster due to the shorter recovery from
the conflict with an adjacent MT_LIST_DEL(), thus it remains desirable
to use it, but at least it deserves a comment.
In addition to this, it's worth mentioning that this list should creates
extreme contention with threads while almost never used. It should be
made per-thread just like the global streams list.
The global streams list is exclusively used for "show sess", to look up
a stream to shut down, and for the hard-stop. Having all of them in a
single list is extremely expensive in terms of locking when using threads,
with performance losses as high as 7% having been observed just due to
this.
This patch makes the list per-thread, since there's no need to have a
global one in this situation. All call places just iterate over all
threads. The most "invasive" changes was in "show sess" where the end
of list needs to go back to the beginning of next thread's list until
the last thread is seen. For now the lock was maintained to keep the
code auditable but a next commit should get rid of it.
The observed performance gain here with only 4 threads is already 7%
(350krps -> 374krps).
The remaining contention on the server lock solely comes from
sess_change_server() which takes the lock to add and remove a
stream from the server's actconn list. This is both expensive
and pointless since we have mt-lists, and this list is only
used by the CLI's "shutdown server sessions" command!
Let's migrate to an mt-list and remove the need for this costly
lock. By doing so, the request rate increased by ~1.8%.
Historically we've been counting lots of client-triggered events in stick
tables to help detect misbehaving ones, but we've been missing the same on
the server side, and there's been repeated requests for being able to count
the server errors per URL in order to precisely monitor the quality of
service or even to avoid routing requests to certain dead services, which
is also called "circuit breaking" nowadays.
This commit introduces http_fail_cnt and http_fail_rate, which work like
http_err_cnt and http_err_rate in that they respectively count events and
their frequency, but they only consider server-side issues such as network
errors, unparsable and truncated responses, and 5xx status codes other
than 501 and 505 (since these ones are usually triggered by the client).
Note that retryable errors are purposely not accounted for, so that only
what the client really sees is considered.
With this it becomes very simple to put some protective measures in place
to perform a redirect or return an excuse page when the error rate goes
beyond a certain threshold for a given URL, and give more chances to the
server to recover from this condition. Typically it could look like this
to bypass a URL causing more than 10 requests per second:
stick-table type string len 80 size 4k expire 1m store http_fail_rate(1m)
http-request track-sc0 base # track host+path, ignore query string
http-request return status 503 content-type text/html \
lf-file excuse.html if { sc0_http_fail_rate gt 10 }
A more advanced mechanism using gpt0 could even implement high/low rates
to disable/enable the service.
Reg-test converteers_ref_cnt_never_dec.vtc was updated to test it.
TCP to H1 upgrades are buggy for now. When such upgrade is performed, a
crash is experienced. The bug is the result of the recent H1 mux
refactoring, and more specifically because of the commit c4bfa59f1 ("MAJOR:
mux-h1: Create the client stream as later as possible"). Indeed, now the H1
mux is responsible to create the frontend conn-stream once the request
headers are fully received. Thus the TCP to H1 upgrade is a problem because
the frontend conn-stream already exists.
To fix the bug, we must keep this conn-stream and the associate stream and
use it in the H1 mux. To do so, the upgrade will be performed in two
steps. First, the mux is upgraded from mux-pt to mux-h1. Then, the mux-h1
performs the stream upgrade, once the request headers are fully received and
parsed. To do so, stream_upgrade_from_cs() must be used. This function set
the SF_HTX flags to switch the stream to HTX mode, it removes the SF_IGNORE
flags and eventually it fills the request channel with some input data.
This patch is required to fix the TCP to H1 upgrades and is intimately
linked with the next commits.
The cumulative numbers of http requests, http errors, bytes received and
sent and their respective rates for a tracked counters are now updated using
specific stream independent functions. These functions are used by the
stream but the aim is to allow the session to do so too. For now, there is
no reason to perform these updates from the session, except from the mux-h2
maybe. But, the mux-h1, on the frontend side, will be able to return some
errors to the client, before the stream creation. In this case, it will be
mandatory to update counters tracked at the session level.
It is now possible to set the buffer used by the channel request buffer when
a stream is created. It may be useful if input data are already received,
instead of waiting the first call to the mux rcv_buf() callback. This change
is mandatory to support H1 connection with no stream attached.
For now, the multiplexers don't pass any buffer. BUF_NULL is thus used to
call stream_create_from_cs().
This function simply calls action_lookup() on the private service_keywords,
to look up a service name. This will be used to detect double registration
of a same service from Lua.
This will be needed by a next patch to fix a bug and will have to be
backported.
This one was not easy because it was embarking many includes with it,
which other files would automatically find. At least global.h, arg.h
and tools.h were identified. 93 total locations were identified, 8
additional includes had to be added.
In the rare files where it was possible to finalize the sorting of
includes by adjusting only one or two extra lines, it was done. But
all files would need to be rechecked and cleaned up now.
It was the last set of files in types/ and proto/ and these directories
must not be reused anymore.
