ACL and sample fetches use args list and it is really not convenient to
check for null args everywhere. Now for empty args we pass a constant
list of end of lists. It will allow us to remove many useless checks.
With this commit, we now separate the channel from the buffer. This will
allow us to replace buffers on the fly without touching the channel. Since
nobody is supposed to keep a reference to a buffer anymore, doing so is not
a problem and will also permit some copy-less data manipulation.
Interestingly, these changes have shown a 2% performance increase on some
workloads, probably due to a better cache placement of data.
These ones are used to set the default ciphers suite on "bind" lines and
"server" lines respectively, instead of using OpenSSL's defaults. These
are probably mainly useful for distro packagers.
Till now the request was made in the trash and sent to the network at
once, and the response was read into a preallocated char[]. Now we
allocate a full buffer for both the request and the response, and make
use of it.
Some of the operations will probably be replaced later with buffer macros
but the point was to ensure we could migrate to use the data layers soon.
One nice improvement caused by this change is that requests are now formed
at the beginning of the check and may safely be sent in multiple chunks if
needed.
The health checks in the servers are becoming a real mess, move them
into their own subsection. We'll soon need to have a struct buffer to
replace the char * as well as check-specific protocol and transport
layers.
Each proxy contains a reference to the original config file and line
number where it was declared. The pointer used is just a reference to
the one passed to the function instead of being duplicated. The effect
is that it is not valid anymore at the end of the parsing and that all
proxies will be enumerated as coming from the same file on some late
configuration errors. This may happen for exmaple when reporting SSL
certificate issues.
By copying using strdup(), we avoid this issue.
1.4 has the same issue, though no report of the proxy file name is done
out of the config section. Anyway a backport is recommended to ease
post-mortem analysis.
Add keyword 'verify' on bind:
'verify none': authentication disabled (default)
'verify optional': accept connection without certificate
and process a verify if the client sent a certificate
'verify required': reject connection without certificate
and process a verify if the client send a certificate
Add keyword 'cafile' on bind:
'cafile <path>' path to a client CA file used to verify.
'crlfile <path>' path to a client CRL file used to verify.
Unix permissions are per-bind configuration line and not per listener,
so let's concretize this in the way the config is stored. This avoids
some unneeded loops to set permissions on all listeners.
The access level is not part of the unix perms so it has been moved
away. Once we can use str2listener() to set all listener addresses,
we'll have a bind keyword parser for this one.
Navigating through listeners was very inconvenient and error-prone. Not to
mention that listeners were linked in reverse order and reverted afterwards.
In order to definitely get rid of these issues, we now do the following :
- frontends have a dual-linked list of bind_conf
- frontends have a dual-linked list of listeners
- bind_conf have a dual-linked list of listeners
- listeners have a pointer to their bind_conf
This way we can now navigate from anywhere to anywhere and always find the
proper bind_conf for a given listener, as well as find the list of listeners
for a current bind_conf.
Some settings need to be merged per-bind config line and are not necessarily
SSL-specific. It becomes quite inconvenient to have this ssl_conf SSL-specific,
so let's replace it with something more generic.
Since it's common enough to discover that some config options are not
supported due to some openssl version or build options, we report the
relevant ones in "haproxy -vv".
A side effect of this change is that the "ssl" keyword on "bind" lines is now
just a boolean and that "crt" is needed to designate certificate files or
directories.
Note that much refcounting was needed to have the free() work correctly due to
the number of cert aliases which can make a context be shared by multiple names.
SSL config holds many parameters which are per bind line and not per
listener. Let's use a per-bind line config instead of having it
replicated for each listener.
At the moment we only do this for the SSL part but this should probably
evolved to handle more of the configuration and maybe even the state per
bind line.
SSL connections take a huge amount of memory, and unfortunately openssl
does not check malloc() returns and easily segfaults when too many
connections are used.
The only solution against this is to provide a global maxsslconn setting
to reject SSL connections above the limit in order to avoid reaching
unsafe limits.
Thomas Heil reported that when using nbproc > 1, his pidfiles were
regularly truncated. The issue could be tracked down to the presence
of a call to lseek(pidfile, 0, SEEK_SET) just before the close() call
in the children, resulting in the file being truncated by the children
while the parent was feeding it. This unexpected lseek() is transparently
performed by fclose().
Since there is no way to have the file automatically closed during the
fork, the only solution is to bypass the libc and use open/write/close
instead of fprintf() and fclose().
The issue was observed on eglibc 2.15.
This is a massive rename of most functions which should make use of the
word "channel" instead of the word "buffer" in their names.
In concerns the following ones (new names) :
unsigned long long channel_forward(struct channel *buf, unsigned long long bytes);
static inline void channel_init(struct channel *buf)
static inline int channel_input_closed(struct channel *buf)
static inline int channel_output_closed(struct channel *buf)
static inline void channel_check_timeouts(struct channel *b)
static inline void channel_erase(struct channel *buf)
static inline void channel_shutr_now(struct channel *buf)
static inline void channel_shutw_now(struct channel *buf)
static inline void channel_abort(struct channel *buf)
static inline void channel_stop_hijacker(struct channel *buf)
static inline void channel_auto_connect(struct channel *buf)
static inline void channel_dont_connect(struct channel *buf)
static inline void channel_auto_close(struct channel *buf)
static inline void channel_dont_close(struct channel *buf)
static inline void channel_auto_read(struct channel *buf)
static inline void channel_dont_read(struct channel *buf)
unsigned long long channel_forward(struct channel *buf, unsigned long long bytes)
Some functions provided by channel.[ch] have kept their "buffer" name because
they are really designed to act on the buffer according to some information
gathered from the channel. They have been moved together to the same place in
the file for better readability but they were not changed at all.
The "buffer" memory pool was also renamed "channel".
The "raw_sock" prefix will be more convenient for naming functions as
it will be prefixed with the data layer and suffixed with the data
direction. So let's rename the files now to avoid any further confusion.
The #include directive was also removed from a number of files which do
not need it anymore.
In an attempt to get rid of fdtab[].state, and to move the relevant
parts to the connection struct, we remove the FD_STCLOSE state which
can easily be deduced from the <owner> pointer as there is a 1:1 match.
When passing arguments to ACLs and samples, some types are stored as
strings then resolved later after config parsing is done. Upon exit,
the arguments need to be freed only if the string was not resolved
yet. At the moment we can encounter double free during deinit()
because some arguments (eg: userlists) are freed once as their own
type and once as a string.
The solution consists in adding an "unresolved" flag to the args to
say whether the value is still held in the <str> part or is final.
This could be debugged thanks to a useful bug report from Sander Klein.
Option httplog needs to be checked only once the proxy has been validated,
so that its final mode (tcp/http) can be used. Also we need to check for
httplog before checking the log format, so that we can report a warning
about this specific option and not about the format it implies.
Before it was possible to resize the buffers using global.tune.bufsize,
the trash has always been the size of a buffer by design. Unfortunately,
the recent buffer sizing at runtime forgot to adjust the trash, resulting
in it being too short for content rewriting if buffers were enlarged from
the default value.
The bug was encountered in 1.4 so the fix must be backported there.
We'll soon have an SSL socket layer, and in order to ease the difference
between the two, we use the name "sock_raw" to designate the one which
directly talks to the sockets without any conversion.
From time to time, some bugs are discovered that are caused by non-initialized
memory areas. It happens that most platforms return a zero-filled area upon
first malloc() thus hiding potential bugs. This patch also replaces malloc()
in pools with calloc() to ensure that all platforms exhibit the same behaviour
upon startup. In order to catch these bugs more easily, add a -dM command line
flag to enable memory poisonning. Optionally, passing -dM<byte> forces the
poisonning byte to <byte>.
This is mainly a massive renaming in the code to get it in line with the
calling convention. Next patch will rename a few files to complete this
operation.
arg_i was almost unused, and since we migrated to use struct arg everywhere,
the rare cases where arg_i was needed could be replaced by switching to
arg->type = ARGT_STOP.
There were a few unchecked write() calls in the debug code that cause
gcc 4.x to emit warnings on recent libc. We don't want to check them
as we can't make anything from the result, let's simply surround them
with an empty if statement.
Note that one of the warnings was for chdir("/") which normally cannot
fail since it follows a successful chroot (which means the perms are
necessarily there). Anyway let's move the call uppe to protect it too.
%Fi: Frontend IP
%Fp: Frontend Port
%Si: Server IP
%Sp: Server Port
%Ts: Timestamp
%rt: HTTP request counter
%H: hostname
%pid: PID
+X: Hexadecimal represenation
The +X mode in logformat displays hexadecimal for the following flags
%Ci %Cp %Fi %Fp %Bi %Bp %Si %Sp %Ts %ct %pid
rename logformat_write_string() to lf_text()
Optimize size computation
Sometimes it is desirable to forward a particular request to a specific
server without having to declare a dedicated backend for this server. This
can be achieved using the "use-server" rules. These rules are evaluated after
the "redirect" rules and before evaluating cookies, and they have precedence
on them. There may be as many "use-server" rules as desired. All of these
rules are evaluated in their declaration order, and the first one which
matches will assign the server.
Released version 1.5-dev8 with the following main changes :
- MINOR: patch for minor typo (ressources/resources)
- MEDIUM: http: add support for sending the server's name in the outgoing request
- DOC: mention that default checks are TCP connections
- BUG/MINOR: fix options forwardfor if-none when an alternative header name is specified
- CLEANUP: Make check_statuses, analyze_statuses and process_chk static
- CLEANUP: Fix HCHK spelling errors
- BUG/MINOR: fix typo in processing of http-send-name-header
- MEDIUM: log: Use linked lists for loggers
- BUILD: fix declaration inside a scope block
- REORG: log: split send_log function
- MINOR: config: Parse the string of the log-format config keyword
- MINOR: add ultoa, ulltoa, ltoa, lltoa implementations
- MINOR: Date and time fonctions that don't use snprintf
- MEDIUM: log: make http_sess_log use log_format
- DOC: log-format documentation
- MEDIUM: log: use log_format for mode tcplog
- MEDIUM: log-format: backend source address %Bi %Bp
- BUG/MINOR: log-format: fix %o flag
- BUG/MEDIUM: bad length in log_format and __send_log
- MINOR: logformat %st is signed
- BUILD/MINOR: fix the source URL in the spec file
- DOC: acl is http_first_req, not http_req_first
- BUG/MEDIUM: don't trim last spaces from headers consisting only of spaces
- MINOR: acl: add new matches for header/path/url length
- BUILD: halog: make halog build on solaris
- BUG/MINOR: don't use a wrong port when connecting to a server with mapped ports
- MINOR: remove the client/server side distinction in SI addresses
- MINOR: halog: add support for matching queued requests
- DOC: indicate that cookie "prefix" and "indirect" should not be mixed
- OPTIM/MINOR: move struct sockaddr_storage to the tail of structs
- OPTIM/MINOR: make it possible to change pipe size (tune.pipesize)
- BUILD/MINOR: silent a build warning in src/pipe.c (fcntl)
- OPTIM/MINOR: move the hdr_idx pools out of the proxy struct
- MEDIUM: tune.http.maxhdr makes it possible to configure the maximum number of HTTP headers
- BUG/MINOR: fix a segfault when parsing a config with undeclared peers
- CLEANUP: rename possibly confusing struct field "tracked"
- BUG/MEDIUM: checks: fix slowstart behaviour when server tracking is in use
- MINOR: config: tolerate server "cookie" setting in non-HTTP mode
- MEDIUM: buffers: add some new primitives and rework existing ones
- BUG: buffers: don't return a negative value on buffer_total_space_res()
- MINOR: buffers: make buffer_pointer() support negative pointers too
- CLEANUP: kill buffer_replace() and use an inline instead
- BUG: tcp: option nolinger does not work on backends
- CLEANUP: ebtree: remove a few annoying signedness warnings
- CLEANUP: ebtree: clarify licence and update to 6.0.6
- CLEANUP: ebtree: remove 4-year old harmless typo in duplicates insertion code
- CLEANUP: ebtree: remove another typo, a wrong initialization in insertion code
- BUG: ebtree: ebst_lookup() could return the wrong entry
- OPTIM: stream_sock: reduce the amount of in-flight spliced data
- OPTIM: stream_sock: save a failed recv syscall when splice returns EAGAIN
- MINOR: acl: add support for TLS server name matching using SNI
- BUG: http: re-enable TCP quick-ack upon incomplete HTTP requests
- BUG: proto_tcp: don't try to bind to a foreign address if sin_family is unknown
- MINOR: pattern: export the global temporary pattern
- CLEANUP: patterns: get rid of pattern_data_setstring()
- MEDIUM: acl: use temp_pattern to store fetched information in the "method" match
- MINOR: acl: include pattern.h to make pattern migration more transparent
- MEDIUM: pattern: change the pattern data integer from unsigned to signed
- MEDIUM: acl: use temp_pattern to store any integer-type information
- MEDIUM: acl: use temp_pattern to store any address-type information
- CLEANUP: acl: integer part of acl_test is not used anymore
- MEDIUM: acl: use temp_pattern to store any string-type information
- CLEANUP: acl: remove last data fields from the acl_test struct
- MEDIUM: http: replace get_ip_from_hdr2() with http_get_hdr()
- MEDIUM: patterns: the hdr() pattern is now of type string
- DOC: add minimal documentation on how ACLs work internally
- DOC: add a coding-style file
- OPTIM: halog: keep a fast path for the lines-count only
- CLEANUP: silence a warning when building on sparc
- BUG: http: tighten the list of allowed characters in a URI
- MEDIUM: http: block non-ASCII characters in URIs by default
- DOC: add some documentation from RFC3986 about URI format
- BUG/MINOR: cli: correctly remove the whole table on "clear table"
- BUG/MEDIUM: correctly disable servers tracking another disabled servers.
- BUG/MEDIUM: zero-weight servers must not dequeue requests from the backend
- MINOR: halog: add some help on the command line
- BUILD: fix build error on FreeBSD
- BUG: fix double free in peers config error path
- MEDIUM: improve config check return codes
- BUILD: make it possible to look for pcre in the default system paths
- MINOR: config: emit a warning when 'default_backend' masks servers
- MINOR: backend: rework the LC definition to support other connection-based algos
- MEDIUM: backend: add the 'first' balancing algorithm
- BUG: fix httplog trailing LF
- MEDIUM: increase chunk-size limit to 2GB-1
- BUG: queue: fix dequeueing sequence on HTTP keep-alive sessions
- BUG: http: disable TCP delayed ACKs when forwarding content-length data
- BUG: checks: fix server maintenance exit sequence
- BUG/MINOR: stream_sock: don't remove BF_EXPECT_MORE and BF_SEND_DONTWAIT on partial writes
- DOC: enumerate valid status codes for "observe layer7"
- MINOR: buffer: switch a number of buffer args to const
- CLEANUP: silence signedness warning in acl.c
- BUG: stream_sock: si->release was not called upon shutw()
- MINOR: log: use "%ts" to log term status only and "%tsc" to log with cookie
- BUG/CRITICAL: log: fix risk of crash in development snapshot
- BUG/MAJOR: possible crash when using capture headers on TCP frontends
- MINOR: config: disable header captures in TCP mode and complain
parse_logformat_string: parse the string, detect the type: text,
separator or variable
parse_logformat_var: dectect variable name
parse_logformat_var_args: parse arguments and flags
add_to_logformat_list: add to the logformat linked list
When checking a configuration file using "-c -f xxx", sometimes it is
reported that a config is valid while it will later fail (eg: no enabled
listener). Instead, let's improve the return values :
- return 0 if config is 100% OK
- return 1 if config has errors
- return 2 if config is OK but no listener nor peer is enabled
This patch settles the 2 loggers limitation.
Loggers are now stored in linked lists.
Using "global log", the global loggers list content is added at the end
of the current proxy list. Each "log" entries are added at the end of
the proxy list.
"no log" flush a logger list.
Ludovic Levesque reported and diagnosed an annoying bug. When a server is
configured to track another one and has a slowstart interval set, it's
assigned a minimal weight when the tracked server goes back up but keeps
this weight forever.
This is because the throttling during the warmup phase is only computed
in the health checking function.
After several attempts to resolve the issue, the only real solution is to
split the check processing task in two tasks, one for the checks and one
for the warmup. Each server with a slowstart setting has a warmum task
which is responsible for updating the server's weight after a down to up
transition. The task does not run in othe situations.
In the end, the fix is neither complex nor long and should be backported
to 1.4 since the issue was detected there first.
It makes no sense to have one pointer to the hdr_idx pool in each proxy
struct since these pools do not depend on the proxy. Let's have a common
pool instead as it is already the case for other types.
Passing -C <dir> causes haproxy to chdir to <dir> before loading
any file. The argument may be passed anywhere on the command line.
A typical use case is :
$ haproxy -C /etc/haproxy -f global.cfg -f haproxy.cfg
The way the unix socket is initialized is awkward. Some of the settings are put
in the sockets itself, other ones in the backend. And more importantly the
global.maxsock value is adjusted so that the stats socket evades the global
maxconn value. This complexifies maxsock computations for nothing, since the
stats socket is not supposed to receive hundreds of concurrent connections when
the global maxconn is very low. What is needed however is to ensure that there
are always connections left for the stats socket even when traffic sockets are
saturated, but this guarantee is not offered anymore by current code.
So as of now, the stats socket is subject to the global maxconn limitation just
as any other socket until a reservation mechanism is implemented.
This global task is used to periodically check for end of resource shortage
and to try to enable queued listeners again. This is important in case some
temporary system-wide shortage is encountered, so that we don't have to wait
for an existing connection to be released before checking the queue again.
For situations where listeners are queued due to the global maxconn being
reached, the task is woken up at least every second. For situations where
a system resource shortage is detected (memory, sockets, ...) the task is
woken up at least every 100 ms. That way, recovery from severe events can
still be achieved under acceptable conditions.
This function is finally not needed anymore, as it has been replaced with
a per-proxy task that is scheduled when some limits are encountered on
incoming connections or when the process is stopping. The savings should
be noticeable on configs with a large number of proxies. The most important
point is that the rate limiting is now enforced in a clean and solid way.
When an accept() fails because of a connection limit or a memory shortage,
we now disable it and queue it so that it's dequeued only when a connection
is released. This has improved the behaviour of the process near the fd limit
as now a listener with a no connection (eg: stats) will not loop forever
trying to get its connection accepted.
The solution is still not 100% perfect, as we'd like to have this used when
proxy limits are reached (use a per-proxy list) and for safety, we'd need
to have dedicated tasks to periodically re-enable them (eg: to overcome
temporary system-wide resource limitations when no connection is released).
Managing listeners state is difficult because they have their own state
and can at the same time have theirs dictated by their proxy. The pause
is not done properly, as the proxy code is fiddling with sockets. By
introducing new functions such as pause_listener()/resume_listener(), we
make it a bit more obvious how/when they're supposed to be used. The
listen_proxies() function was also renamed to resume_proxies() since
it's only used for pause/resume.
This patch is the first in a series aiming at getting rid of the maintain_proxies
mess. In the end, proxies should not call enable_listener()/disable_listener()
anymore.
By default on a single process, we accept 100 connections at once. This is too
much on recent CPUs where the cache is constantly thrashing, because we visit
all those connections several times. We should batch the processing slightly
less so that all the accepted session may remain in cache during their initial
processing.
Lowering the batch size from 100 to 32 has changed the connection rate for
concurrencies between 5-10k from 67 kcps to 94 kcps on a Core i5 660 (4M L3),
and forward rates from 30k to 39.5k.
Tests on this hardware show that values between 10 and 30 seem to do the job fine.
The motivation for this is that when soft-restart is merged
it will be come more important to free all relevant memory in deinit()
Discovered using valgrind.
The motivation for this is that when soft-restart is merged
it will be come more important to free all relevant memory in deinit()
Discovered using valgrind.
The motivation for this is that when soft-restart is merged
it will be come more important to free all relevant memory in deinit()
Discovered using valgrind.
The motivation for this is that when soft-restart is merged
it will be come more important to free all relevant memory in deinit()
Discovered using valgrind.
And also rename "req_acl_rule" "http_req_rule". At the beginning that
was a bit confusing to me, especially the "req_acl" list which in fact
holds what we call rules. After some digging, it appeared that some
part of the code is 100% HTTP and not just related to authentication
anymore, so let's move that part to HTTP and keep the auth-only code
in auth.c.
It's very annoying that frontend and backend stats are merged because we
don't know what we're observing. For instance, if a "listen" instance
makes use of a distinct backend, it's impossible to know what the bytes_out
means.
Some points take care of not updating counters twice if the backend points
to the frontend, indicating a "listen" instance. The thing becomes more
complex when we try to add support for server side keep-alive, because we
have to maintain a pointer to the backend used for last request, and to
update its stats. But we can't perform such comparisons anymore because
the counters will not match anymore.
So in order to get rid of this situation, let's have both frontend AND
backend stats in the "struct proxy". We simply update the relevant ones
during activity. Some of them are only accounted for in the backend,
while others are just for frontend. Maybe we can improve a bit on that
later, but the essential part is that those counters now reflect what
they really mean.
As reported by the Loadbalancer.org team, it was not possible to bind
more than 1024 ports. This is because the process' limits were set after
trying to bind the sockets, which defeats their purpose.
This fix must be backported to 1.4 and 1.3.
One of the requirements we have is to run multiple instances of haproxy on a
single host; this is so that we can split the responsibilities (and change
permissions) between product teams. An issue we ran up against is how we
would distinguish between the logs generated by each instance. The solution
we came up with (please let me know if there is a better way) is to override
the application tag written to syslog. We can then configure syslog to write
these to different files.
I have attached a patch adding a global option 'log-tag' to override the
default syslog tag 'haproxy' (actually defaults to argv[0]).
Haproxy does not include the hostname rather the IP of the machine in
the syslog headers it sends. Unfortunately this means that for each log
line rsyslog does a reverse dns on the client IP and in the case of
non-routable IPs one gets the public hostname not the internal one.
While this is valid according to RFC3164 as one might imagine this is
troublsome if you have some machines with public IPs, internal IPs, no
reverse DNS entries, etc and you want a standardized hostname based log
directory structure. The rfc says the preferred value is the hostname.
This patch adds a global "log-send-hostname" statement which accepts an
optional string to force the host name. If unset, the local host name
is used.
HTTP content-based health checks will be involved in searching text in pages.
Some pages may not fit in the default buffer (16kB) and sometimes it might be
desired to have larger buffers in order to find patterns. Running checks on
smaller URIs is always preferred of course.
(cherry picked from commit 043f44aeb835f3d0b57626c4276581a73600b6b1)
In deinit(), it is possible that we first free the listeners, then
unbind them all. Right now this situation can't happen because the
only way to call deinit() is to pass via a soft-stop which will
already unbind all protocols. But later this might become a problem.
This counter is incremented for each incoming connection and each active
listener, and is used to prevent haproxy from stopping upon SIGUSR1. It
will thus be possible for some tasks in increment this counter in order
to prevent haproxy from dying until they have completed their job.
Signal zero is never delivered by the system. However having a signal to
which functions and tasks can subscribe to be notified of a stopping event
is useful. So this patch does two things :
1) allow signal zero to be delivered from any function of signal handler
2) make soft_stop() deliver this signal so that tasks can be notified of
a stopping condition.
The two new functions below make it possible to register any number
of functions or tasks to a system signal. They will be called in the
registration order when the signal is received.
struct sig_handler *signal_register_fct(int sig, void (*fct)(struct sig_handler *), int arg);
struct sig_handler *signal_register_task(int sig, struct task *task, int reason);
In case of binding failure during startup, we wait for some time sending
signals to old pids so that they release the ports we need. But if there
aren't any old pids anymore, it's useless to wait, we prefer to fail fast.
Along with this change, we now have the number of old pids really found
in the nb_oldpids variable.
The 'client.c' file now only contained frontend-specific functions,
so it has naturally be renamed 'frontend.c'. Same for client.h. This
has also been an opportunity to remove some cross references from
files that should not have depended on it.
In the end, this file should contain a protocol-agnostic accept()
code, which would initialize a session, task, etc... based on an
accept() from a lower layer. Right now there are still references
to TCP.
Apparently some systems define MSG_NOSIGNAL but do not necessarily
check it (or maybe binaries are built somewhere and used on older
versions). There were reports of very recent FreeBSD setups causing
SIGPIPEs, while older ones catch the signal. Recent FreeBSD manpages
indeed define MSG_NOSIGNAL.
So let's now unconditionnaly catch the signal. It's useless not to do
it for the rare cases where it's not needed (linux 2.4 and below).
We are seeing both real servers repeatedly going on- and off-line with
a period of tens of seconds. Packet tracing, stracing, and adding
debug code to HAProxy itself has revealed that the real servers are
always responding correctly, but HAProxy is sometimes receiving only
part of the response.
It appears that the real servers are sending the test page as three
separate packets. HAProxy receives the contents of one, two, or three
packets, apparently randomly. Naturally, the health check only
succeeds when all three packets' data are seen by HAProxy. If HAProxy
and the real servers are modified to use a plain HTML page for the
health check, the response is in the form of a single packet and the
checks do not fail.
(...)
I've added buffer and length variables to struct server, and allocated
space with the rest of the server initialisation.
(...)
It seems to be working fine in my tests, and handles check responses
that are bigger than the buffer.
Marcello Gorlani reported that at least on FreeBSD, a long hostname
was reported with garbage on the stats page. POSIX does not make it
mandatory for gethostname() to NULL-terminate the string in case of
truncation, and at least FreeBSD appears not to do it. So let's
force null-termination to keep safe.
The bounce realign function was algorithmically good but as expected
it was not cache-friendly. Using it with large requests caused so many
cache thrashing that the function itself could drain 70% of the total
CPU time for only 0.5% of the calls !
Revert back to a standard memcpy() using a specially allocated swap
buffer. We're now back to 2M req/s on pipelined requests.
Thich patch fixes cfgparser not to leak memory on each
default server statement and adds several missing free
calls in deinit():
- free(l->name)
- free(l->counters)
- free(p->desc);
- free(p->fwdfor_hdr_name);
None of them are critical, hopefully.
Released version 1.4-rc1 with the following main changes :
- [MEDIUM] add a maintenance mode to servers
- [MINOR] http-auth: last fix was wrong
- [CONTRIB] add base64rev-gen.c that was used to generate the base64rev table.
- [MINOR] Base64 decode
- [MINOR] generic auth support with groups and encrypted passwords
- [MINOR] add ACL_TEST_F_NULL_MATCH
- [MINOR] http-request: allow/deny/auth support for frontend/backend/listen
- [MINOR] acl: add http_auth and http_auth_group
- [MAJOR] use the new auth framework for http stats
- [DOC] add info about userlists, http-request and http_auth/http_auth_group acls
- [STATS] make it possible to change a CLI connection timeout
- [BUG] patterns: copy-paste typo in type conversion arguments
- [MINOR] pattern: make the converter more flexible by supporting void* and int args
- [MINOR] standard: str2mask: string to netmask converter
- [MINOR] pattern: add support for argument parsers for converters
- [MINOR] pattern: add the "ipmask()" converting function
- [MINOR] config: off-by-one in "stick-table" after list of converters
- [CLEANUP] acl, patterns: make use of my_strndup() instead of malloc+memcpy
- [BUG] restore accidentely removed line in last patch !
- [MINOR] checks: make the HTTP check code add the CRLF itself
- [MINOR] checks: add the server's status in the checks
- [BUILD] halog: make without arch-specific optimizations
- [BUG] halog: fix segfault in case of empty log in PCT mode (cherry picked from commit fe362fe476)
- [MINOR] http: disable keep-alive when process is going down
- [MINOR] acl: add build_acl_cond() to make it easier to add ACLs in config
- [CLEANUP] config: use build_acl_cond() instead of parse_acl_cond()
- [CLEANUP] config: use warnif_cond_requires_resp() to check for bad ACLs
- [MINOR] prepare req_*/rsp_* to receive a condition
- [CLEANUP] config: specify correct const char types to warnif_* functions
- [MEDIUM] config: factor out the parsing of 20 req*/rsp* keywords
- [MEDIUM] http: make the request filter loop check for optional conditions
- [MEDIUM] http: add support for conditional request filter execution
- [DOC] add some build info about the AIX platform (cherry picked from commit e41914c77e)
- [MEDIUM] http: add support for conditional request header addition
- [MEDIUM] http: add support for conditional response header rewriting
- [DOC] add some missing ACLs about response header matching
- [MEDIUM] http: add support for proxy authentication
- [MINOR] http-auth: make the 'unless' keyword work as expected
- [CLEANUP] config: use build_acl_cond() to simplify http-request ACL parsing
- [MEDIUM] add support for anonymous ACLs
- [MEDIUM] http: switch to tunnel mode after status 101 responses
- [MEDIUM] http: stricter processing of the CONNECT method
- [BUG] config: reset check request to avoid double free when switching to ssl/sql
- [MINOR] config: fix too large ssl-hello-check message.
- [BUG] fix error response in case of server error
Support the new syntax (http-request allow/deny/auth) in
http stats.
Now it is possible to use the same syntax is the same like in
the frontend/backend http-request access control:
acl src_nagios src 192.168.66.66
acl stats_auth_ok http_auth(L1)
stats http-request allow if src_nagios
stats http-request allow if stats_auth_ok
stats http-request auth realm LB
The old syntax is still supported, but now it is emulated
via private acls and an aditional userlist.
Add generic authentication & authorization support.
Groups are implemented as bitmaps so the count is limited to
sizeof(int)*8 == 32.
Encrypted passwords are supported with libcrypt and crypt(3), so it is
possible to use any method supported by your system. For example modern
Linux/glibc instalations support MD5/SHA-256/SHA-512 and of course classic,
DES-based encryption.
Cyril Bonté found that when an error is detected in one config file, it
is also reported in all other ones, which is wrong. The fix obviously
consists in checking the return code from readcfgfile() and not the
accumulator.
Cameron Simpson reported an annoying case where haproxy simply reports
"Error(s) found in configuration file" when the file is not found or
not readable.
Fortunately the parsing function still returns -1 in case of open
error, so we're able to detect the issue from the caller and report
the corresponding errno message.
Some rarely information are stored in fdtab, making it larger for no
reason (source port ranges, remote address, ...). Such information
lie there because the checks can't find them anywhere else. The goal
will be to move these information to the stream interface once the
checks make use of it.
For now, we move them to an fdinfo array. This simple change might
have improved the cache hit ratio a little bit because a 0.5% of
performance increase has measured.
During troubleshooting, it's often useful to get the list of supported
pollers but until now it was required to have a working configuration
first. Since the pollers are known before main() is called, let's list
them with the build options.
This patch implements "description" (proxy and global) and "node" (global)
options, removes "node-name" and adds "show-node" & "show-desc" options
for "stats". It also changes the way the header lines (with proxy name) and
the statistics are displayed, so stats no longer look so clumsy with very
long names.
Instead of "node-name" it is possible to use show-node/show-desc with
an optional parameter that overrides a default node/description.
backend cust-0045
# report specific values for this customer
stats show-node Europe
stats show-desc Master node for Europe, Asia, Africa
Commit 27a674efb8 introduced the ability
to configure buffer sizes. Unfortunately, the pool was created before
the conf was read, so that is was always set to the default size.
In order to fix that, we delay the call to init_buffer(), which is not
a problem since nothing uses it during the initialization.
The new tune.bufsize and tune.maxrewrite global directives allow one to
change the buffer size and the maxrewrite size. Right now, setting bufsize
too low will block stats sockets which will not be able to write at all.
An error checking must be added to buffer_write_chunk() so that if it
cannot write its message to an empty buffer, it causes the caller to abort.
Creating a frontend for the global stats socket will help merge
unix sockets management with the other socket management. Since
frontends are huge structs, we only allocate it if required.
