Replace ->li quic_conn pointer to struct listener member by ->target which is
an object type enum and adapt the code.
Use __objt_(listener|server)() where the object type is known. Typically
this is were the code which is specific to one connection type (frontend/backend).
Remove <server> parameter passed to qc_new_conn(). It is redundant with the
<target> parameter.
GSO is not supported at this time for QUIC backend. qc_prep_pkts() is modified
to prevent it from building more than an MTU. This has as consequence to prevent
qc_send_ppkts() to use GSO.
ssl_clienthello.c code is run only by listeners. This is why __objt_listener()
is used in place of ->li.
Complete stream output for "show quic" by displaying information from
its upper QCS. Note that QCS may be NULL if already released, so a
default output is also provided.
Add a new format for "show quic" command labelled as "stream". This is
an equivalent of "show sess", dedicated to the QUIC stack. Each active
QUIC streams are listed on a line with their related infos.
The main objective of this command is to ensure there is no freeze
streams remaining after a transfer.
There was some possible confusion between fields related to congestion
window size min and max limit which cannot be exceeded, and the maximum
value previously reached by the window.
Fix this by adopting a new naming scheme. Enforced limit are now renamed
<limit_max>/<limit_min>, while the previously reached max value is
renamed <cwnd_last_max>.
This should be backported up to 3.1.
Since these commits the 32bits build is broken due to several errors as follow:
CC src/quic_cli.o
src/quic_cli.c: In function ‘dump_quic_full’:
src/quic_cli.c:285:94: error: format ‘%ld’ expects argument of type ‘long int’,
but argument 5 has type ‘uint64_t’ {aka ‘long long unsigned int’} [-Werror=format=]
285 | chunk_appendf(&trash, " [initl] rx.ackrng=%-6zu tx.inflight=%-6zu(%ld%%)\n",
| ~~^
| |
| long int
| %lld
286 | pktns->rx.arngs.sz, pktns->tx.in_flight,
287 | pktns->tx.in_flight * 100 / qc->path->cwnd);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| uint64_t {aka long long unsigned int}
Replace several %ld by %llu with ull as printf conversion in quic_clic.c and a
%ld by %lld with (long long) as printf conversion in quic_cc_cubic.c.
Thank you to Ilya (@chipitsine) for having reported this issue in GH #2689.
Must be backported to 3.0.
Add ->state_cli() new callback to quic_cc_algo struct to define a
function called by the "show quic (cc|full)" commands to dump some information
about the congestion algorithm internal state currently in use by the QUIC
connections.
Implement this callback for CUBIC algorithm to dump its internal variables:
- K: (the time to reach the cubic curve inflexion point),
- last_w_max: the last maximum window value reached before intering
the last recovery period. This is also the window value at the
inflexion point of the cubic curve,
- wdiff: the difference between the current window value and last_w_max.
So negative before the inflexion point, and positive after.
Add a sent bytes counter for each quic_conn instance. A secondary field
which only account bytes sent via GSO which is useful to ensure if this
is activated.
For the moment, these counters are reported on "show quic" but not
aggregated on proxy quic module stats.
The main CLI I/O handle is responsible to interrupt the processing on
shutdown/abort. It is not the responsibility of the I/O handler of CLI
commands to take care of it.
Extend "show quic" to be able to dump MUX related information. This is
done via the new function qcc_show_quic(). This replaces the old streams
dumping list which was incomplete.
These info are displayed on full output or by specifying "mux" field.
Add the possibility to customize show quic full output with only a
specific set of printed fields. This is specified as a comma-separated
list. Here are the currently supported values :
* tp: transport parameters
* sock: connection addresses and socket FD
* pktns: packet number space with ack ranges and in flight bytes
* cc: congestion controler and loss information
Note that streams output is not filtered by this mechanism. It's because
it will be replaced soon by an output generated from the MUX which will
use its owned field name.
Add the possibilty to restrict show quic output to only a single
connection. This is done by specifying a quic_conn address pointer.
Default format selection has evolved with it. Indeed, it seems more
fitting to use full format by default when filtering on a connection.
However, it's still possible to revert to the original oneline format
with it by specifying it explicitely.
Output of 'show quic' is messed up since the introduction of reordered
packets counter in the following commit. The new counter is mixed up
with the first stream line. This is due to the wrong placement of the
newline delimiter.
167e38e0e0
MINOR: quic: Add a counter for reordered packets
This should be backported up to 2.6.
A packet is considered as reordered when it is detected as lost because its packet
number is above the largest acknowledeged packet number by at least the
packet reordering threshold value.
Add ->nb_reordered_pkt new quic_loss struct member at the same location that
the number of lost packets to count such packets.
Should be backported to 2.6.
This date is shared between the idle timer and hanshake timeout. So, it should be
useful to dump the expiration date of the idle timer task itself, in place of the
idle timer expiration date. This way, the handshake timeout value will be visible
during the handshake from CLI "show quic full" command.
Due to the fact that several variable values (rtt_var, srtt) were stored as multiple
of their real values, some calculations were less accurate as expected.
Stop storing 4*rtt_var values, and 8*srtt values.
Adjust all the impacted statements.
Must be backported as far as 2.6.
