stream_int_chk_rcv_conn() did not clear connection flags before updating them. It
is unsure whether this could have caused the stalled transfers that have been
reported since dev15.
In order to avoid such further issues, we now use a simple inline function to do
all the job.
Looking at the assembly code that updt_fd() and alloc/release_spec_entry
produce in the polling loops, it's clear that gcc has to recompute pointers
several times in a row because of limited spare registers. By better
grouping adjacent structure updates, we improve the code size by around
60 bytes in the fast path on x86.
The stick counters were in two distinct sets of struct members,
causing some code to be duplicated. Now we use an array, which
enables some processing to be performed in loops. This allowed
the code to be shrunk by 700 bytes.
Until now it was only possible to use track-sc1/sc2 with "src" which
is the IPv4 source address. Now we can use track-sc1/sc2 with any fetch
as well as any transformation type. It works just like the "stick"
directive.
Samples are automatically converted to the correct types for the table.
Only "tcp-request content" rules may use L7 information, and such information
must already be present when the tracking is set up. For example it becomes
possible to track the IP address passed in the X-Forwarded-For header.
HTTP request processing now also considers tracking from backend rules
because we want to be able to update the counters even when the request
was already parsed and tracked.
Some more controls need to be performed (eg: samples do not distinguish
between L4 and L6).
Both servers and proxies share a common set of parameters for outgoing
connections, and since they're not stored in a similar structure, a lot
of code is duplicated in the connection setup, which is one sensible
area.
Let's first define a common struct for these settings and make use of it.
Next patches will de-duplicate code.
This change also fixes a build breakage that happens when USE_LINUX_TPROXY
is not set but USE_CTTPROXY is set, which seem to be very unlikely
considering that the issue was introduced almost 2 years ago an never
reported.
Sessions using client certs are huge (more than 1 kB) and do not fit
in session cache, or require a huge cache.
In this new implementation sshcachesize set a number of available blocks
instead a number of available sessions.
Each block is large enough (128 bytes) to store a simple session (without
client certs).
Huge sessions will take multiple blocks depending on client certificate size.
Note: some unused code for session sync with remote peers was temporarily
removed.
When the PROXY protocol header is expected and fails, leading to an
abort of the incoming connection, we now emit a log message. If option
dontlognull is set and it was just a port probe, then nothing is logged.
Since the introduction of SSL, it became quite annoying not to get any useful
info in logs about handshake failures. Let's improve reporting for embryonic
sessions by checking a per-connection error code and reporting it into the logs
if an error happens before the session is completely instanciated.
The "dontlognull" option is supported in that if a connection does not talk
before being aborted, nothing will be emitted.
At the moment, only timeouts are considered for SSL and the PROXY protocol,
but next patches will handle more errors.
Commit 9b6700f added "v6only". As suggested by Vincent Bernat, it is
sometimes useful to have the opposite option to force binding to the
two protocols when the system is configured to bind to v6 only by
default. This option does exactly this. v6only still has precedence.
Depending on the content-types and accept-encoding fields, some responses
might or might not be compressed. Let's have a counter of the number of
compressed responses and report it in the stats to help improve compression
usage.
Some cosmetic issues were fixed in the CSV output too (missing commas at the
end).
Commit 0ffde2cc in 1.5-dev13 tried to always disable polling on file
descriptors when errors were encountered. Unfortunately it did not
always succeed in doing so because it relied on detecting polling
changes to disable it. Let's use a dedicated conn_stop_polling()
function that is inconditionally called upon error instead.
This managed to stop a busy loop observed when a health check makes
use of the send-proxy protocol and fails before the connection can
be established.
Commit 24db47e0 tried to improve support for delayed ACK upon connect
but it was incomplete, because checks with the proxy protocol would
always enable polling for data receive and there was no way of
distinguishing data polling and delayed ack.
So we add a distinct delack flag to the connect() function so that
the caller decides whether or not to use a delayed ack regardless
of pending data (eg: when send-proxy is in use). Doing so covers all
combinations of { (check with data), (sendproxy), (smart-connect) }.
Several places got the connection close sequence wrong because it
was not obvious. In practice we always need the same sequence when
aborting, so let's have a common function for this.
The porting of checks to using connections was totally bogus. Some checks
were considered successful as soon as the connection was established,
regardless of any response. Some errors would be triggered upon recv
if polling was enabled for send or if the send channel was shut down.
Now the behaviour is much better. It would be cleaner to perform the
fd_delete() in wake_srv_chk() and to process failures and timeouts
separately, but this is already a good start.
Some server check flag names were not properly choosen and cause
analysis trouble, especially the CHK_RUNNING one which does not
mean that a check is running but that the server is running...
Here's the rename :
CHK_RUNNING -> CHK_PASSED
CHK_ERROR -> CHK_FAILED
It was a bit frustrating to have no idea about the bandwidth saved by
HTTP compression. Now we have per-frontend and per-backend stats. The
stats on the HTTP interface are shown in a hover title in the "bytes out"
column if at least something was fed to the compressor. 3 new columns
appeared in the CSV stats output.
Some users need more than 64 characters to log large cookies. The limit
was set to 63 characters (and not 64 as previously documented). Now it
is possible to change this using the global "tune.http.cookielen" setting
if required.
New option 'maxcompcpuusage' in global section.
Sets the maximum CPU usage HAProxy can reach before stopping the
compression for new requests or decreasing the compression level of
current requests. It works like 'maxcomprate' but with the Idle.
This patch makes changes in the http_response_forward_body state
machine. It checks if the compress algorithm had consumed data before
swapping the temporary and the input buffer. So it prevents null sized
zlib chunks.
global.tune.maxaccept was used for all listeners. This becomes really not
convenient when some listeners are bound to a single process and other ones
are bound to many processes.
Now we change the principle : we count the number of processes a listener
is bound to, and apply the maxaccept either entirely if there is a single
process, or divided by twice the number of processes in order to maintain
fairness.
The default limit has also been increased from 32 to 64 as it appeared that
on small machines, 32 was too low to achieve high connection rates.
The new "cpu-map" directive allows one to assign the CPU sets that
a process is allowed to bind to. This is useful in combination with
the "nbproc" and "bind-process" directives.
The support is implicit on Linux 2.6.28 and above.
This is done by passing the default value to SSLCACHESIZE in sessions.
User can use tune.sslcachesize to change this value.
By default, it is set to 20000 sessions as openssl internal cache size.
Currently, a session entry size is between 592 and 616 bytes depending on the arch.
Instead of storing a couple of (int, ptr) in the struct connection
and the struct session, we use a different method : we only store a
pointer to an integer which is stored inside the target object and
which contains a unique type identifier. That way, the pointer allows
us to retrieve the object type (by dereferencing it) and the object's
address (by computing the displacement in the target structure). The
NULL pointer always corresponds to OBJ_TYPE_NONE.
This reduces the size of the connection and session structs. It also
simplifies target assignment and compare.
In order to improve the generated code, we try to put the obj_type
element at the beginning of all the structs (listener, server, proxy,
si_applet), so that the original and target pointers are always equal.
A lot of code was touched by massive replaces, but the changes are not
that important.
Before connections were introduced, it was possible to connect an
external task to a stream interface. However it was left as an
exercise for the brave implementer to find how that ought to be
done.
The feature was broken since the introduction of connections and
was never fixed since due to lack of users. Better remove this dead
code now.
Hijackers were functions designed to inject data into channels in the
distant past. They became unused around 1.3.16, and since there has
not been any user of this mechanism to date, it's uncertain whether
the mechanism still works (and it's not really useful anymore). So
better remove it as well as the pointer it uses in the channel struct.
Some servers are not totally HTTP-compliant when it comes to parsing the
Connection header. This is particularly true with WebSocket where it happens
from time to time that a server doesn't support having a "close" token along
with the "Upgrade" token in the Connection header. This broken behaviour has
also been noticed on some clients though the problem is less frequent on the
response path.
Sometimes the workaround consists in enabling "option http-pretend-keepalive"
to leave the request Connection header untouched, but this is not always the
most convenient solution. This patch introduces a new solution : haproxy now
also looks for the "Upgrade" token in the Connection header and if it finds
it, then it refrains from adding any other token to the Connection header
(though "keep-alive" and "close" may still be removed if found). The same is
done for the response headers.
This way, WebSocket much with less changes even when facing non-compliant
clients or servers. At least it fixes the DISCONNECT issue that was seen
on the websocket.org test.
Note that haproxy does not change its internal mode, it just refrains from
adding new tokens to the connection header.
Now that all pollers make use of speculative I/O, there is no point
having two epoll implementations, so replace epoll with the sepoll code
and remove sepoll which has just become the standard epoll method.
si_fd() is not used a lot, and breaks builds on OpenBSD 5.2 which
defines this name for its own purpose. It's easy enough to remove
this one-liner function, so let's do it.
ev_sepoll already provides everything needed to manage FD events
by only manipulating the speculative I/O list. Nothing there is
sepoll-specific so move all this to fd.
This patch adds input and output rate calcutation on the HTTP compresion
feature.
Compression can be limited with a maximum rate value in kilobytes per
second. The rate is set with the global 'maxcomprate' option. You can
change this value dynamicaly with 'set rate-limit http-compression
global' on the UNIX socket.
At the moment sepoll is not 100% event-driven, because a call to fd_set()
on an event which is already being polled will not change its state.
This causes issues with OpenSSL because if some I/O processing is interrupted
after clearing the I/O event (eg: read all data from a socket, can't put it
all into the buffer), then there is no way to call the SSL_read() again once
the buffer releases some space.
The only real solution is to go 100% event-driven. The principle is to use
the spec list as an event cache and that each time an I/O event is reported
by epoll_wait(), this event is automatically scheduled for addition to the
spec list for future calls until the consumer explicitly asks for polling
or stopping.
Doing this is a bit tricky because sepoll used to provide a substantial
number of optimizations such as event merging. These optimizations have
been maintained : a dedicated update list is affected when events change,
but not the event list, so that updates may cancel themselves without any
side effect such as displacing events. A specific case was considered for
handling newly created FDs as soon as they are detected from within the
poll loop. This ensures that their read or write operation will always be
attempted as soon as possible, thus reducing the number of poll loops and
process_session wakeups. This is especially true for newly accepted fds
which immediately perform their first recv() call.
Two new flags were added to the fdtab[] struct to tag the fact that a file
descriptor already exists in the update list. One flag indicates that a
file descriptor is new and has just been created (fdtab[].new) and the other
one indicates that a file descriptor is already referenced by the update list
(fdtab[].updated). Even if the FD state changes during operations or if the
fd is closed and replaced, it's not an issue because the update flag remains
and is easily spotted during list walks. The flag must absolutely reflect the
presence of the fd in the update list in order to avoid overflowing the update
list with more events than there are distinct fds.
Note that this change also recovers the small performance loss introduced
by its connection counter-part and goes even beyond.
