This patch implements a couple of converters to validate and extract data from a
MQTT (Message Queuing Telemetry Transport) message. The validation consists of a
few checks as well as "packet size" validation. The extraction can get any field
from the variable header and the payload.
This is limited to CONNECT and CONNACK packet types only. All other messages are
considered as invalid. It is not a problem for now because only the first packet
on each side can be parsed (CONNECT for the client and CONNACK for the server).
MQTT 3.1.1 and 5.0 are supported.
Reviewed and Fixed by Christopher Faulet <cfaulet@haproxy.com>
This patch implements a couple of converters to validate and extract tag value
from a FIX (Financial Information eXchange) message. The validation consists in
a few checks such as mandatory fields and checksum computation. The extraction
can get any tag value based on a tag string or tag id.
This patch requires the istend() function. Thus it depends on "MINOR: ist: Add
istend() function to return a pointer to the end of the string".
Reviewed and Fixed by Christopher Faulet <cfaulet@haproxy.com>
Released version 2.4-dev0 with the following main changes :
- MINOR: version: it's development again.
- DOC: mention in INSTALL that it's development again
Let us use SSL_CTX_set1_curves_list, defined by OpenSSL, as well as in
openssl-compat when SSL_CTRL_SET_CURVES_LIST is present (BoringSSL),
for feature detection instead of versions.
OpenSSL 1.0.2 and onwards define SSL_CTX_set1_curves_list which is both a
function and a macro. OpenSSL 1.0.2 to 1.1.0 define SSL_CTRL_SET_CURVES_LIST
as a macro, which disappeared from 1.1.1. BoringSSL only has that one and
not the former macro but it does have the function. Let's keep the test on
the macro matching the function name by defining the macro to itself when
needed.
This does the same as fd_want_recv() except that it does check for
fd_updt[] to be allocated, as this may be called during early listener
initialization. Previously we used to check fd_updt[] before calling
fd_want_recv() but this is not correct since it does not update the
FD flags. This method will be safer.
The mem stats are pretty convenient to spot leaks, except that they count
free(NULL) as 1, and the code does actually have quite a number of free(foo)
guards where foo is NULL if the object was already freed. Let's just not
count these ones so that the stats remain consistent. Now it's possible
to compare the strdup()/malloc() and free() and verify they are consistent.
It's more convenient to return the element than to return just 0 or 1,
as the next thing we'll want to do is to act on this element! In addition
it was using variable arguments instead of consts, causing some reuse
constraints which were also addressed. This doesn't change its use as
a boolean, hence why call places were not modified.
The "weight" column on the stats page is somewhat confusing when using
slowstart becaue it reports the effective weight, without being really
explicit about it. In some situations the user-configured weight is more
relevant (especially with long slowstarts where it's important to know
if the configured weight is correct).
This adds a new uweight stat which reports a server's user-configured
weight, and in a backend it receives the sum of all servers' uweights.
In addition it adds the mention of "effective" in a few descriptions
for the "weight" column (help and doc).
As a result, the list of servers in a backend is now always scanned
when dumping the stats. But this is not a problem given that these
servers are already scanned anyway and for way heavier processing.
"no-maint" is a bit similar to "up" except that it will only hide
servers that are in maintenance (or disabled in the configuration), and
not those that are enabled but failed a check. One benefit here is to
significantly reduce the output of the "show stat" command when using
large server-templates containing entries that are not yet provisioned.
Note that the prometheus exporter also has such an option which does
the exact same.
This reverts commit b7ba1d9011. Actually
this test had already been removed in the past by commit fac0f645d
("BUG/MEDIUM: queue: make pendconn_cond_unlink() really thread-safe"),
but the condition to reproduce the bug mentioned there was not clear.
Now after analysis and a certain dose of code cleanup, things start to
appear more obvious. what happens is that if we check the presence of
the node in the tree without taking the lock, we can see the NULL at
the instant the node is being unlinked by another thread in
pendconn_process_next_strm() as part of __pendconn_unlink_prx() or
__pendconn_unlink_srv(). Till now there is no issue except that the
pendconn is not removed from the queue during this operation and that
the task is scheduled to be woken up by pendconn_process_next_strm()
with the stream being added to the list of the server's active
connections by __stream_add_srv_conn(). The first thread finishes
faster and gets back to stream_free() faster than the second one
sets the srv_conn on the stream, so stream_free() skips the s->srv_conn
test and doesn't try to dequeue the freshly queued entry. At the
very least a barrier would be needed there but we can't afford to
free the stream while it's being queued. So there's no other solution
than making sure that either __pendconn_unlink_prx() or
pendconn_cond_unlink() get the entry but never both, which is why the
lock is required around the test. A possible solution would be to set
p->target before unlinking the entry and using it to complete the test.
This would leave no dead period where the pendconn is not seen as
attached.
It is possible, yet extremely difficult, to reproduce this bug, which
was first noticed in bug #880. Running 100 servers with maxconn 1 and
maxqueue 1 on leastconn and a connect timeout of 30ms under 16 threads
with DEBUG_UAF, with a traffic making the backend's queue oscillate
around zero (typically using 250 connections with a local httpterm
server) may rarely manage to trigger a use-after-free.
No backport is needed.
On connection error processing, we can see massive storms of calls to
pendconn_cond_unlink() to release a possible place in the queue. For
example, in issue #908, on average half of the threads are caught in
this function via back_try_conn_req() consecutive to a synchronous
error. However we wait until grabbing the lock to know if the pendconn
is effectively in a queue, which is expensive for many cases. We know
the transition may only happen from in-queue to out-of-queue so it's safe
to first run a preliminary check to see if it's worth going further. This
will allow to avoid the cost of locking for most requests. This should
not change anything for those completing correctly as they're already
run through pendconn_free() which doesn't call pendconn_cond_unlink()
unless deemed necessary.
This is an anticipation of finer grained locking for the queues. For now
all lock places take a write lock so that there is no difference at all
with previous code.
In addition to the previous simplification, most locks don't use the
seek or read lock (e.g. spinlocks etc) so let's split the dump into
distinct operations (write/seek/read) and only report those which
were used. Now the output size is roughly divided by 5 compared
to previous ones.
The lock stats are very verbose and more than half of them are used in
a typical test, making it hard to spot the sought values. Let's simply
report "not used" for those which have not been called at all.
When an internal response is returned to a client, the message payload must be
skipped if it is a reply to a HEAD request. The payload is removed from the HTX
message just before the message forwarding.
This bugs has been around for a long time. It was already there in the pre-HTX
versions. In legacy HTTP mode, internal errors are not parsed. So this bug
cannot be easily fixed. Thus, this patch should only be backported in all HTX
versions, as far as 2.0. However, the code has significantly changed in the
2.2. Thus in the 2.1 and 2.0, the patch must be entirely reworked.
Partial support of conditional HTTP requests. This commit adds the
support of the 'If-None-Match' header (see RFC 7232#3.2).
When a client specifies a list of ETags through one or more
'If-None-Match' headers, they are all compared to the one that might have
been stored in the corresponding http cache entry until one of them
matches.
If a match happens, a specific "304 Not Modified" response is
sent instead of the cached data. This response has all the stored
headers but no other data (see RFC 7232#4.1). Otherwise, the whole cached data
is sent.
Although unlikely in a GET/HEAD request, the "If-None-Match: *" syntax is
valid and also receives a "304 Not Modified" response (RFC 7434#4.3.2).
This resolves a part of GitHub issue #821.
Add a function that compares two etags that might be of different types.
If any of them is weak, the 'W/' prefix is discarded and a strict string
comparison is performed.
Co-authored-by: Tim Duesterhus <tim@bastelstu.be>
In issue #785, users are reporting that it's not convenient to load a
".crt.key" when the configuration contains a ".crt".
This option allows to remove the extension of the certificate before
trying to load any extra SSL file (.key, .ocsp, .sctl, .issuer etc.)
The patch changes a little bit the way ssl_sock_load_files_into_ckch()
looks for the file.
When a connection is released, depending on its state, it may be detached from
the session and it may be removed from the server lists. The first case may
happen for private or unsharable active connections. The second one should only
be performed for idle or available connections. We never try to remove a
connection from the server list if it is attached to a session. But it is also
important to never try to remove a private connecion from the server lists, even
if it is not attached to a session. Otherwise, the curr_used_conn server counter
is decremented once too often.
This bug was introduced by the commit 04a24c5ea ("MINOR: connection: don't check
priv flag on free"). It is related to the issue #881. It only affects the 2.3,
no backport is needed.
This counter is only updated and never used, and in addition it's done
without any atomicity so it's very unlikely to be correct on multi-CPU
systems! Let's just remove it since it's not used.
A few structures were slightly rearranged in order to plug some holes
left around the locks. Sizes ranging from 8 to 32 bytes could be saved
depending on the structures. No performance difference was noticed (none
was expected there), though memory usage might be slightly reduced in
some rare cases.
We don't need to waste the size of a long for the locks: with the plocks,
even an unsigned short would offer enough room for up to 126 threads! Let's
use an unsigned int which will be easier to place in certain structures
and will more conveniently plug some holes, and Atomic ops are at least
as fast on 32-bit as on 64-bit. This will not change anything for 32-bit
platforms.
It's a bit overkill to register an initcall to call a function to set
a lock to zero when not debugging, let's just declare the lock as
pre-initialized to zero.
BoringSSL is a fork of OpenSSL 1.1.0, however in
49e9f67d8b7cbeb3953b5548ad1009d15947a523 it has changed version to 1.1.1.
Should fix issue #895.
This must be backported to 2.2, 2.1, 2.0, 1.8
It was previously a spinlock, and it happens that a number of LB algos
only lock it for lookups, without performing any modification. Let's
first turn it to an rwlock and w-lock it everywhere. This is strictly
identical.
It was carefully checked that every HA_SPIN_LOCK() was turned to
HA_RWLOCK_WRLOCK() and that HA_SPIN_UNLOCK() was turned to
HA_RWLOCK_WRUNLOCK() on this lock. _INIT and _DESTROY were updated too.
Since our locks are based on progressive locks, we support the upgradable
seek lock that is compatible with readers and upgradable to a write lock.
The main purpose is to take it while seeking down a tree for modification
while other threads may seek the same tree for an input (e.g. compute the
next event date).
The newly supported operations are:
HA_RWLOCK_SKLOCK(lbl,l) pl_take_s(l) /* N --> S */
HA_RWLOCK_SKTOWR(lbl,l) pl_stow(l) /* S --> W */
HA_RWLOCK_WRTOSK(lbl,l) pl_wtos(l) /* W --> S */
HA_RWLOCK_SKTORD(lbl,l) pl_stor(l) /* S --> R */
HA_RWLOCK_WRTORD(lbl,l) pl_wtor(l) /* W --> R */
HA_RWLOCK_SKUNLOCK(lbl,l) pl_drop_s(l) /* S --> N */
HA_RWLOCK_TRYSKLOCK(lbl,l) (!pl_try_s(l)) /* N -?> S */
HA_RWLOCK_TRYRDTOSK(lbl,l) (!pl_try_rtos(l)) /* R -?> S */
Existing code paths are left unaffected so this patch doesn't affect
any running code.
We currently use only read and write lock operations with rwlocks, but
ours also support upgradable seek locks for which we do not report any
stats. Let's add them now when DEBUG_THREAD is enabled.
We don't need to specify the handler anymore since it's set in the
receiver. Let's remove this argument from the function and clean up
the remains of code that were still setting it.
Now we define a new sock_accept_iocb() for socket-based stream protocols
and use it as a wrapper for listener_accept() which now takes a listener
and not an FD anymore. This will allow the receiver's I/O cb to be
redefined during registration, and more specifically to get rid of the
hard-coded hacks in protocol_bind_all() made for syslog.
The previous ->accept() callback in the protocol was removed since it
doesn't have anything to do with accept() anymore but is more generic.
A few places where listener_accept() was compared against the FD's IO
callback for debugging purposes on the CLI were updated.
For now we're still using the protocol's default accept() function as
the I/O callback registered by the receiver into the poller. While
this is usable for most TCP connections where a listener is needed,
this is not suitable for UDP where a different handler is needed.
Let's make this configurable in the receiver just like the upper layer
is configurable for listeners. In order to ease stream protocols
handling, the protocols will now provide a default I/O callback
which will be preset into the receivers upon allocation so that
almost none of them has to deal with it.
The socket-specific accept() code in listener_accept() has nothing to
do there. Let's move it to sock.c where it can be significantly cleaned
up. It will now directly return an accepted connection and provide a
status code instead of letting listener_accept() deal with various errno
values. Note that this doesn't support the sockpair specific code.
The function is now responsible for dealing with its own receiver's
polling state and calling fd_cant_recv() when facing EAGAIN.
One tiny change from the previous implementation is that the connection's
sockaddr is now allocated before trying accept(), which saves a memcpy()
of the resulting address for each accept at the expense of a cheap
pool_alloc/pool_free on the final accept returning EAGAIN. This still
apparently slightly improves accept performance in microbencharks.
This per-protocol function will be used to accept an incoming
connection and return it as a struct connection*. As such the protocol
stack's internal representation of a connection will not need to be
handled by the listener code.
This call was introduced by commit 5ced3e887 ("MINOR: sock: add
sock_accept_conn() to test a listening socket") but is actually quite
confusing because it makes one think the socket will accept a connection
(which is what we want to have in a new function) while it only tells
whether it's configured to accept connections. Let's call it
sock_accepting_conn() instead.
The same change was applied to sockpair which had the same issue.
accept_conn() will be used to accept an incoming connection and return it.
It will have to deal with various error codes. The currently identified
ones were created as CO_AC_*.
Till now we would keep a per-thread queue of pending incoming connections
for which we would store:
- the listener
- the accepted FD
- the source address
- the source address' length
And these elements were first used in session_accept_fd() running on the
target thread to allocate a connection and duplicate them again. Doing
this induces various problems. The first one is that session_accept_fd()
may only run on file descriptors and cannot be reused for QUIC. The second
issue is that it induces lots of memory copies and that the listerner
queue thrashes a lot of cache, consuming 64 bytes per entry.
This patch changes this by allocating the connection before queueing it,
and by only placing the connection's pointer into the queue. Indeed, the
first two calls used to initialize the connection already store all the
information above, which can be retrieved from the connection pointer
alone. So we just have to pop one pointer from the target thread, and
pass it to session_accept_fd() which only needs the FD for the final
settings.
This starts to make the accept path a bit more transport-agnostic, and
saves memory and CPU cycles at the same time (1% connection rate increase
was noticed with 4 threads). Thanks to dividing the accept-queue entry
size from 64 to 8 bytes, its size could be increased from 256 to 1024
connections while still dividing the overall size by two. No single
queue full condition was met.
One minor drawback is that connection may be allocated from one thread's
pool to be used into another one. But this already happens a lot with
connection reuse so there is really nothing new here.
Roughly half of the calls to sockadr_alloc() are made to copy an already
known address. Let's optionally pass it in argument so that the function
can handle the copy at the same time, this slightly simplifies its usage.
fd_done_recv() used to be useful with the FD cache because it used to
allow to keep a file descriptor active in the poller without being
marked as ready in the cache, saving it from ringing immediately,
without incurring any system call. It was a way to make it yield
to wait for new events leaving a bit of time for others. The only
user left was the connection accepter (listen_accept()). We used
to suspect that with the FD cache removal it had become totally
useless since changing its readiness or not wouldn't change its
status regarding the poller itself, which would be the only one
deciding to report it again.
Careful tests showed that it indeed has exactly zero effect nowadays,
the syscall numbers are exactly the same with and without, including
when enabling edge-triggered polling.
Given that there's no more API available to manipulate it and that it
was directly called as an optimization from listener_accept(), it's
about time to remove it.
No protocol defines it anymore. The last user used to be the monitor-net
stuff that got partially broken already when the tcp_drain() function
moved to conn_sock_drain() with commit e215bba95 ("MINOR: connection:
make conn_sock_drain() work for all socket families") in 1.9-dev2.
A part of this will surely move back later when non-socket connections
arrive with QUIC but better keep the API clean and implement what's
needed in time instead.
As discussed here during 2.1-dev, "monitor-net" is totally obsolete:
https://www.mail-archive.com/haproxy@formilux.org/msg35204.html
It's fundamentally incompatible with usage of SSL, and imposes the
presence of file descriptors with hard-coded syscalls directly in the
generic accept path.
It's very unlikely that anyone has used it in the last 10 years for
anything beyond testing. In the worst case if anyone would depend
on it, replacing it with "http-request return status 200 if ..." and
"mode http" would certainly do the trick.
The keyword is still detected as special by the config parser to help
users update their configurations appropriately.
As discussed here during 2.1-dev, "mode health" is totally obsolete:
https://www.mail-archive.com/haproxy@formilux.org/msg35204.html
It's fundamentally incompatible with usage of SSL, doesn't support
source filtering, and imposes the presence of file descriptors with
hard-coded syscalls directly in the generic accept path.
It's very unlikely that anyone has used it in the last 10 years for
anything beyond testing. In the worst case if anyone would depend
on it, replacing it with "http-request return status 200" and "mode
http" would certainly do the trick.
The keyword is still detected as special by the config parser to help
users update their configurations appropriately.
Do not check CO_FL_PRIVATE flag to check if the connection is in session
list on conn_free. This is necessary due to the future patches which add
server connections in the session list even if not private, if the mux
protocol is the subject of HOL blocking.
On server connection migration from one thread to another, the wrong
idle thread-specific counter is decremented. This bug was introduced
since commit 3d52f0f1f8 due to the
factorization with srv_use_idle_conn. However, this statement is only
executed from conn_backend_get. Extract the decrement from
srv_use_idle_conn in conn_backend_get and use the correct
thread-specific counter.
Rename the function to srv_use_conn to better reflect its purpose as it
is also used with a newly initialized connection not in the idle list.
As a side change, the connection insertion to available list has also
been extracted to conn_backend_get. This will be useful to be able to
specify an alternative list for protocol subject to HOL risk that should
not be shared between several clients.
This bug is only present in this release and thus do not need a backport.
Now we introdce a new .rx_listening() function to report if a receiver is
actually a listening socket. The reason for this is to help detect shared
sockets that might have been broken by sibling processes.
At several places we need to check if a socket is still valid and still
willing to accept connections. Instead of open-coding this, each time,
let's add a new function for this.
This patch adds "coll" new counter and the heartbeat timer values to "show peers"
command. It also adds the elapsed time since the last handshake to new "last_hdshk"
new peer dump field.
Now we have ->suspend() and ->resume() for listeners at the protocol
level. This means that it now becomes possible for a protocol to redefine
its own way to suspend and resume. The default functions are provided for
TCP, UDP and unix, and they are pass-through to the receiver equivalent
as it used to be till now. Nothing was defined for sockpair since it does
not need to suspend/resume during reloads, hence it will succeed.
The inner part now goes into the protocol and is used to decide how to
unbind a given protocol's listener. The existing code which is able to
also unbind the receiver was provided as a default function that we
currently use everywhere. Some complex listeners like QUIC will use this
to decide how to unbind without impacting existing connections, possibly
by setting up other incoming paths for the traffic.
This is used as a generic way to unbind a receiver at the end of
do_unbind_listener(). This allows to considerably simplify that function
since we can now let the protocol perform the cleanup. The generic code
was moved to sock.c, along with the conditional rx_disable() call. Now
the code also supports that the ->disable() function of the protocol
which acts on the listener performs the close itself and adjusts the
RX_F_BUOND flag accordingly.
This listener flag indicates whether the receiver part of the listener
is specific to the master or to the workers. In practice it's only used
by the master's CLI right now. It's used to know whether or not the FD
must be closed before forking the workers. For this reason it's way more
of a receiver's property than a listener's property, so let's move it
there under the name RX_F_MWORKER. The rest of the code remains
unchanged.
And also remove it from its callers. This subtle distinction was added as
sort of a hack for the seamless reload feature but is not needed anymore
since the do_close turned unused since commit previous commit ("MEDIUM:
listener: let do_unbind_listener() decide whether to close or not").
This also removes the unbind_listener_no_close() function.
This will instantly stop all listeners except those which belong to
a proxy configured with a grace time. This means that UDP listeners,
and peers will also be stopped when called this way.
There are multiple ways a proxy may switch to the disabled state,
but now it's essentially once it loses its last listener. Instead
of keeping duplicate code around and reporting the state change
before actually seeing it, we now report it at the moment it's
performed (from the last listener leaving) which allows to remove
the message from all other places.
For now we cannot easily distinguish a peers frontend from another one,
which will be problematic to avoid reporting them when stopping their
listeners. Let's add PR_MODE_PEERS for this. It's not supposed to cause
any issue since all non-HTTP proxies are handled similarly now.
This function will be used to definitely stop a listener (e.g. during a
soft_stop). This is actually tricky because it may be called for a proxy
or for a protocol, both of which require locks and already hold some. The
function takes booleans indicating which ones are already held, hoping
this will be enough. It's not well defined wether proto->disable() and
proto->rx_disable() are supposed to be called with any lock held, and
they are used from do_unbind_listener() with all these locks. Some back
annotations ought to be added on this point.
The proxy's listeners count is updated, and the proxy is marked as
disabled and woken up after the last one is gone. Note that a
listener in listen state is already not attached anymore since it
was disabled.
We'll need an already locked variant of this function so let's make
__delete_listener() which will be called with the protocol lock held
and the listener's lock held.
These methods will be used to enable/disable accepting new connections
so that listeners do not play with FD directly anymore. Since all the
currently supported protocols work on socket for now, these are identical
to the rx_enable/rx_disable functions. However they were not defined in
sock.c since it's likely that some will quickly start to differ. At the
moment they're not used.
We have to take care of fd_updt before calling fd_{want,stop}_recv()
because it's allocated fairly late in the boot process and some such
functions may be called very early (e.g. to stop a disabled frontend's
listeners).
These methods will be used to enable/disable rx at the receiver level so
that callers don't play with FDs directly anymore. All our protocols use
the generic ones from sock.c at the moment. For now they're not used.
These will be used on receivers, to enable or disable receiving on a
listener, which most of the time just consists in enabling/disabling
the file descriptor.
We have to take care of the existence of fd_updt to know if we may
or not call fd_{want,stop}_recv() since it's not permitted in very
early boot.
This one undoes ->rx_suspend(), it tries to restore an operational socket.
It was only implemented for TCP since it's the only one we support right
now.
The ->pause method is inappropriate since it doesn't exactly "pause" a
listener but rather temporarily disables it so that it's not visible at
all to let another process take its place. The term "suspend" is more
suitable, since the "pause" is actually what we'll need to apply to the
FULL and LIMITED states which really need to make a pause in the accept
process. And it goes well with the use of the "resume" function that
will also need to be made per-protocol.
Let's rename the function and make it act on the receiver since it's
already what it essentially does, hence the prefix "_rx" to make it
more explicit.
The protocol struct was a bit reordered because it was becoming a real
mess between the parts related to the listeners and those for the
receivers.
Since the listeners were split into receiver+listener, this field ought
to have been renamed because it's confusing. It really links receivers
and not listeners, as most of the time it's used via rx.proto_list!
The nb_listeners field was updated accordingly.
These ones have never been called, they were referenced by the protocol's
disable_all for some protocols but there are no traces of their use, so
in addition to not being sure the code works, it has never been tested.
Let's remove a bit of complexity starting from there.
These two functions are used to pause and resume all listeners of
all protocols. They use the standard listener functions for this
so they're supposed to handle the situation gracefully regardless
of the upper proxies' states, and they will report completion on
proxies once the switch is performed.
It might be nice to define a particular "failed" state for listeners
that cannot resume and to count them on proxies in order to mention
that they're definitely stuck. On the other hand, the current
situation is retryable which is quite appreciable as well.
The two functions don't need to be distinguished anymore since they have
all the necessary info to act as needed on their listeners. Let's just
pass via stop_proxy() and make it check for each listener which one to
close or not.
Its sole remaining purpose was to display "proxy foo started", which
has little benefit and pollutes output for those with plenty of proxies.
Let's remove it now.
The VTCs were updated to reflect this, because many of them had explicit
counts of dropped lines to match this message.
This is tagged as MEDIUM because some users may be surprized by the
loss of this quite old message.
The remaining proxy states were only used to distinguish an enabled
proxy from a disabled one. Due to the initialization order, both
PR_STNEW and PR_STREADY were equivalent after startup, and they
would only differ from PR_STSTOPPED when the proxy is disabled or
shutdown (which is effectively another way to disable it).
Now we just have a "disabled" field which allows to distinguish them.
It's becoming obvious that start_proxies() is only used to print a
greeting message now, that we'd rather get rid of. Probably that
zombify_proxy() and stop_proxy() should be merged once their
differences move to the right place.
The enabled/disabled config options were stored into a "state" field
that is an integer but contained only PR_STNEW or PR_STSTOPPED, which
is a bit confusing, and causes a dependency with proxies. This was
renamed to "disabled" and is used as a boolean. The field was also
moved to the end of the struct to stop creating a hole and fill another
one.
This state was used to mention that a proxy was in PAUSED state, as opposed
to the READY state. This was causing some trouble because if a listener
failed to resume (e.g. because its port was temporarily in use during the
resume), it was not possible to retry the operation later. Now by checking
the number of READY or PAUSED listeners instead, we can accurately know if
something went bad and try to fix it again later. The case of the temporary
port conflict during resume now works well:
$ socat readline /tmp/sock1
prompt
> disable frontend testme3
> disable frontend testme3
All sockets are already disabled.
> enable frontend testme3
Failed to resume frontend, check logs for precise cause (port conflict?).
> enable frontend testme3
> enable frontend testme3
All sockets are already enabled.
This state is only set when a pause() fails but isn't even set when a
resume() fails. And we cannot recover from this state. Instead, let's
just count remaining ready listeners to decide to emit an error or not.
It's more accurate and will better support new attempts if needed.
Since v1.4 or so, it's almost not possible anymore to set this state. The
only exception is by using the CLI to change a frontend's maxconn setting
below its current usage. This case makes no sense, and for other cases it
doesn't make sense either because "full" is a vague concept when only
certain listeners are full and not all. Let's just remove this unused
state and make it clear that it's not reported. The "ready" or "open"
states will continue to be reported without being misleading as they
will be opposed to "stop".
The proxy state tries to be synthetic but that doesn't work well with
many listeners, especially for transition phases or after a failed
pause/resume.
In order to address this, we'll instead rely on counters of listeners in
a given state for the 3 major states (ready, paused, listen) and a total
counter. We'll now be able to determine a proxy's state by comparing these
counters only.
This function is used as a wrapper to set a listener's state everywhere.
We'll use it later to maintain some counters in a consistent state when
switching state so it's capital that all state changes go through it.
No functional change was made beyond calling the wrapper.
The zombie state is not used anymore by the listeners, because in the
last two cases where it was tested it couldn't match as it was covered
by the test on the process mask. Instead now the FD is either in the
LISTEN state or the INIT state. This also avoids forcing the listener
to be single-dimensional because actually belonging to another process
isn't totally exclusive with the other states, which explains some of
the difficulties requiring to check the proc_mask and the fd sometimes.
So let's get rid of it now not to be tempted to reuse it.
The doc on the listeners state was updated.
Use the new stats module API to integrate the dns counters in the
standard stats. This is done in order to avoid code duplication, keep
the code related to cli out of dns and use the full possibility of the
stats function, allowing to print dns stats in csv or json format.
Add a boolean 'clearable' on stats module structure. If set, it forces
all the counters to be reset on 'clear counters' cli command. If not,
the counters are reset only when 'clear counters all' is used.
This is executed on startup with the registered statistics module. The
existing statistics have been merged in a list containing all
statistics for each domain. This is useful to print all available
statistics in a generic way.
Allocate extra counters for all proxies/servers/listeners instances.
These counters are allocated with the counters from the stats modules
registered on startup.
Implement a small API to easily add extra counters inside a structure
instance. This will be used to implement dynamic statistics linked on
every type of object as needed.
The counters are stored in a dynamic array inside the relevant objects.
A stat module can be registered to quickly add new statistics on
haproxy. It must be attached to one of the available stats domain. The
register must be done using INITCALL on STG_REGISTER.
The stat module has a name which should be unique for each new module in
a domain. It also contains a statistics list with their name/desc and a
pointer to a function used to fill the stats from the module counters.
The module also provides the initial counters values used on
automatically allocated counters. The offset for these counters
are stored in the module structure.
This flag can be used to determine on what type of proxy object the
statistics should be relevant. It will be useful when adding dynamic
statistics. Currently, this flag is not used.
The domain option will be used to have statistics attached to other
objects than proxies/listeners/servers. At the moment, only the PROXY
domain is available.
Add an argument 'domain' on the 'show stats' cli command to specify the
domain. Only 'domain proxy' is available now. If not specified, proxy
will be considered the default domain.
For HTML output, only proxy statistics will be displayed.
Use an opaque pointer to store proxy instance. Regroup server/listener
as a single opaque pointer. This has the benefit to render the structure
more evolutive to support statistics on other types of objects in the
future.
This patch is needed to extend stat support for components other than
proxies objects.
The prometheus module has been adapted for these changes.
Render the stats size parametric in csv/json dump functions. This is
needed for the future patch which provides dynamic stats. For now the
static value ST_F_TOTAL_FIELDS is provided.
Remove unused parameter px on stats_dump_one_line.
This patch is needed to extend stat support to components other than
proxies objects.
Un-mark stats_dump_one_line and stats_putchk as static and export them
in the header file. These functions will be reusable by other components to
print their statistics.
This patch is needed to extend stat support to components other than
proxies objects.
A crash reported in github issue #880 looks impossible unless
pendconn_cond_unlink() occasionally sees a null leaf_p when attempting
to remove an entry, which seems to be confirmed by the reporter. What
seems to be happening is that depending on compiler optimizations,
this pointer can appear as null while pointers are moved if one of
the node's parents is removed from or inserted into the tree. There's
no explicit null of the pointer during these operations but those
pointers are rewritten in multiple steps and nothing prevents this
situation from happening, and there are no particular barrier nor
atomic ops around this.
This test was used to avoid unnecessary locking, for already deleted
entries, but looking at the code it appears that pendconn_free() already
resets s->pend_pos that's used as <p> there, and that the other call
reasons are after an error where the connection will be dropped as
well. So we don't save anything by doing this test, and make it
unsafe. The older code used to check for list emptiness there and
not inside pendconn_unlink(), which explains why the code has stayed
there. Let's just remove this now.
Thanks to @jaroslawr for reporting this issue in great details and for
testing the proposed fix.
This should be backpored to 1.8, where the test on LIST_ISEMPTY should
be moved to pendconn_unlink() instead (inside the lock, just like 2.0+).
Allow the syntax "${...[*]}" to expand an environment variable
containing several values separated by spaces as individual arguments. A
new flag PARSE_OPT_WORD_EXPAND has been added to toggle this feature on
parse_line invocation. In case of an invalid syntax, a new error
PARSE_ERR_WRONG_EXPAND will be triggered.
This feature has been asked on the github issue #165.
As part of his GREASE experiments on Chromium, Bence Bky reported in
https://lists.w3.org/Archives/Public/ietf-http-wg/2020JulSep/0202.html
and https://bugs.chromium.org/p/chromium/issues/detail?id=1127060 that
a certain combination of frame type and frame flags was causing an error
on app.slack.com. It turns out that it's haproxy that is causing this
issue because the frame type is wrongly assumed to support padding, the
frame flags indicate padding is present, and the frame is too short for
this, resulting in an error.
The reason why only some frame types are affected is due to the frame
type being used in a bit shift to match against a mask, and where the
5 lower bits of the frame type only are used to compute the frame bit.
If the resulting frame bit matches a DATA, HEADERS or PUSH_PROMISE frame
bit, then padding support is assumed and the test is enforced, resulting
in a PROTOCOL_ERROR or FRAME_SIZE_ERROR depending on the payload size.
We must never match any such bit for unsupported frame types so let's
add a check for this. This must be backported as far as 1.8.
Thanks to Cooper Bethea for providing enough context to help narrow the
issue down and to Bence Bky for creating a simple reproducer.
We don't need to cheat with the sock_domain anymore, we now always have
the SOCK_DGRAM sock_type as a complementary selector. This patch restores
the sock_domain to AF_INET* in the udp* protocols and removes all traces
of the now unused AF_CUST_*.
The protocol array used to be only indexed by socket family, which is very
problematic with UDP (requiring an extra family) and with the forthcoming
QUIC (also requiring an extra family), especially since that binds them to
certain families, prevents them from supporting dgram UNIX sockets etc.
In order to address this, we now start to register the protocols with more
info, namely the socket type and the control type (either stream or dgram).
This is sufficient for the protocols we have to deal with, but could also
be extended further if multiple protocol variants were needed. But as is,
it still fits nicely in an array, which is convenient for lookups that are
instant.
This one will be needed to more accurately select a protocol. It may
differ from the socket type for QUIC, which uses dgram at the socket
layer and provides stream at the control layer. The upper level requests
a control layer only so we need this field.
Most callers of str2sa_range() need the protocol only to check that it
provides a ->connect() method. It used to be used to verify that it's a
stream protocol, but it might be a bit early to get rid of it. Let's keep
the test for now but move it to str2sa_range() when the new flag PA_O_CONNECT
is present. This way almost all call places could be cleaned from this.
There's a strange test in the server address parsing code that rechecks
the family from the socket which seems to be a duplicate of the previously
removed tests. It will have to be rechecked.
We'll need this so that it can return pointers to stacked protocol in
the future (for QUIC). In addition this removes a lot of tests for
protocol validity in the callers.
Some of them were checked further apart, or after a call to
str2listener() and they were simplified as well.
There's still a trick, we can fail to return a protocol in case the caller
accepts an fqdn for use later. This is what servers do and in this case it
is valid to return no protocol. A typical example is:
server foo localhost:1111
The function will need to use more than just a family, let's pass it
the selected protocol. The caller will then be able to do all the fancy
stuff required to pick the best protocol.
This is at least temporary, as the migration at once is way too difficuly.
For now it still creates listeners but only allows DGRAM sockets. This
aims at easing the split between listeners and receivers.
If a file descriptor was passed, we can optionally return it. This will
be useful for listening sockets which are both a pre-bound FD and a ready
socket.
These flags indicate whether the call is made to fill a bind or a server
line, or even just send/recv calls (like logs or dns). Some special cases
are made for outgoing FDs (e.g. pipes for logs) or socket FDs (e.g external
listeners), and there's a distinction between stream or dgram usage that's
expected to significantly help str2sa_range() proceed appropriately with
the input information. For now they are not used yet.
These flags indicate what is expected regarding port specifications. Some
callers accept none, some need fixed ports, some have it mandatory, some
support ranges, and some take an offset. Each possibilty is reflected by
an option. For now they are not exploited, but the goal is to instrument
str2sa_range() to properly parse that.
We currently have an argument to require that the address is resolved
but we'll soon add more, so let's turn it into a bit field. The old
"resolve" boolean is now PA_O_RESOLVE.
At some places (log fd@XXX, bind fd@XXX) we support using an explicit
file descriptor number, that is placed into the sockaddr for later use.
The problem is that till now it was done with an AF_UNSPEC family, which
is also used for other situations like missing info or rings (for logs).
Let's create an "official" family AF_CUST_EXISTING_FD for this case so
that we are certain the FD can be found in the address when it is set.
This removes the following fields from struct protocol that are now
retrieved from the protocol family instead: .sock_family, .sock_addrlen,
.l3_addrlen, .addrcmp, .bind, .get_src, .get_dst.
This also removes the UDP-specific udp{,6}_get_{src,dst}() functions
which were referenced but not used yet. Their goal was only to remap
the original AF_INET* addresses to AF_CUST_UDP*.
Note that .sock_domain is still there as it's used as a selector for
the protocol struct to be used.
We now take care of retrieving sock_family, l3_addrlen, bind(),
addrcmp(), get_src() and get_dst() from the protocol family and
not just the protocol itself. There are very few places, this was
only seldom used. Interestingly in sock_inet.c used to rely on
->sock_family instead of ->sock_domain, and sock_unix.c used to
hard-code PF_UNIX instead of using ->sock_domain.
Also it appears obvious we have something wrong it the protocol
selection algorithm because sock_domain is the one set to the custom
protocols while it ought to be sock_family instead, which would avoid
having to hard-code some conversions for UDP namely.
We need to specially handle protocol families which regroup common
functions used for a given address family. These functions include
bind(), addrcmp(), get_src() and get_dst() for now. Some fields are
also added about the address family, socket domain (protocol family
passed to the socket() syscall), and address length.
These protocol families are referenced from the protocols but not yet
used.
Note that for now we don't have a sockpair.c file to host that unusual
family, so the new function was placed directly into proto_sockpair.c.
It's no big deal given that this family is currently not shared with
multiple protocols.
The function does almost nothing but setting up the receiver. This is
normal as the socket the FDs are passed onto are supposed to have been
already created somewhere else, and the only usable identifier for such
a socket pair is the receiving FD itself.
The function was assigned to sockpair's ->bind() and is not used yet.
This function performs all the bind-related stuff for UNIX sockets that
was previously done in uxst_bind_listener(). There is a very tiny
difference however, which is that previously, in the unlikely event
where listen() would fail, it was still possible to roll back the binding
and rename the backup to the original socket. Now we have to rename it
before calling returning, hence it will be done before calling listen().
However, this doesn't cover any particular use case since listen() has no
reason to fail there (and the rollback is not done for inherited sockets),
that was just done that way as a generic error processing path.
The code is not used yet and is referenced in the uxst proto's ->bind().
This function collects all the receiver-specific code from both
tcp_bind_listener() and udp_bind_listener() in order to provide a more
generic AF_INET/AF_INET6 socket binding function. For now the API is
not very elegant because some info are still missing from the receiver
while there's no ideal place to fill them except when calling ->listen()
at the protocol level. It looks like some polishing code is needed in
check_config_validity() or somewhere around this in order to finalize
the receivers' setup. The main issue is that listeners and receivers
are created *before* bind_conf options are parsed and that there's no
finishing step to resolve some of them.
The function currently sets up a receiver and subscribes it to the
poller. In an ideal world we wouldn't subscribe it but let the caller
do it after having finished to configure the L4 stuff. The problem is
that the caller would then need to perform an fd_insert() call and to
possibly set the exported flag on the FD while it's not its job. Maybe
an improvement could be to have a separate sock_start_receiver() call
in sock.c.
For now the function is not used but it will soon be. It's already
referenced as tcp and udp's ->bind().
This will be the function that must be used to bind the receiver. It
solely depends on the address family but for now it's simpler to have
it per protocol.
The new RX_O_FOREIGN, RX_O_V6ONLY and RX_O_V4V6 options are now set into
the rx_settings part during the parsing, so that we don't need to adjust
them in each and every listener anymore. We have to keep both v4v6 and
v6only due to the precedence from v6only over v4v6.
It's the receiver's FD that's inherited from the parent process, not
the listener's so the flag must move to the receiver so that appropriate
actions can be taken.
In order to split the receiver from the listener, we'll need to know that
a socket is already bound and ready to receive. We used to do that via
tha LI_O_ASSIGNED state but that's not sufficient anymore since the
receiver might not belong to a listener anymore. The new RX_F_BOUND flag
is used for this.
A receiver will have to pass a context to be installed into the fdtab
for use by the handler. We need to set this into the receiver struct
as the bind will happen longer after the configuration.
Just like listeners keep a pointer to their bind_conf, receivers now also
have a pointer to their rx_settings. All those belonging to a listener are
automatically initialized with a pointer to the bind_conf's settings.
We'll soon add flags for the receivers, better add them to the final
file, so it's time to move the definition to receiver-t.h. The struct
receiver and rx_settings were placed there.
The receiver is the one which depends on the protocol while the listener
relies on the receiver. Let's move the protocol there. Since there's also
a list element to get back to the listener from the proto list, this list
element (proto_list) was moved as well. For now when scanning protos, we
still see listeners which are linked by their rx.proto_list part.
The listening socket is represented by its file descriptor, which is
generic to all receivers and not just listeners, so it must move to
the rx struct.
It's worth noting that in order to extend receivers and listeners to
other protocols such as QUIC, we'll need other handles than file
descriptors here, and that either a union or a cast to uintptr_t
will have to be used. This was not done yet and the field was
preserved under the name "fd" to avoid adding confusion.
In order to start to split the listeners into the listener part and the
event receiver part, we introduce a new field "rx" into struct listener
that will eventually become a separate struct receiver. This patch only
adds the struct with an options field that the receivers will need.
The netns is common to all listeners/receivers and is used to bind the
listening socket so it must be in the receiver settings and not in the
listener. This removes some yet another set of unnecessary loops.
The interface is common to all listeners/receivers and is used to bind
the listening socket so it must be in the receiver settings and not in
the listener. This removes some unnecessary loops.
There currently is a large inconsistency in how binding parameters are
split between bind_conf and listeners. It happens that for historical
reasons some parameters are available at the listener level but cannot
be configured per-listener but only for a bind_conf, and thus, need to
be replicated. In addition, some of the bind_conf parameters are in fact
for the listening socket itself while others are for the instanciated
sockets.
A previous attempt at splitting listeners into receivers failed because
the boundary between all these settings is not well defined.
This patch introduces a level of listening socket settings in the
bind_conf, that will be detachable later. Such settings that are solely
for the listening socket are:
- unix socket permissions (used only during binding)
- interface (used for binding)
- network namespace (used for binding)
- process mask and thread mask (used during startup)
The rest seems to be used only to initialize the resulting sockets, or
to control the accept rate. For now, only the unix params (bind_conf->ux)
were moved there.
Remove the last utility functions for handling the multi-cert bundles
and remove the multi-variable from the ckch structure.
With this patch, the bundles are completely removed.
Since the removal of the multi-certificates bundle support, this
variable is not useful anymore, we can remove all tests for this
variable and suppose that every ckch contains a single certificate.
Commit 4987a4744 ("CLEANUP: tree-wide: use VAR_ARRAY instead of [0] in
various definitions") broke the build on clang due to the tlv field used
to receive/send the proxy protocol. The problem is that struct tlv is
included at the beginning of struct tlv_ssl, which doesn't make much
sense. In fact the value[] array isn't really a var array but just an
end of struct marker, and must really be an array of size zero.
Surprisingly there were still a number of [0] definitions for variable
sized arrays in certain structures all over the code. We need to use
VAR_ARRAY instead of zero to accommodate various compilers' preferences,
as zero was used only on old ones and tends to report errors on new ones.
