When EBO was brought to pl_take_w() by plock commit 60d750d ("plock: use
EBO when waiting for readers to leave in take_w() and stow()"), a mistake
was made: the mask against which the current value of the lock is tested
excludes the first reader like in stow(), but it must not because it was
just obtained via an ldadd() which means that it doesn't count itself.
The problem this causes is that if there is exactly one reader when a
writer grabs the lock, the writer will not wait for it to leave before
starting its operations.
The solution consists in checking for any reader in the IF. However the
mask passed to pl_wait_unlock_*() must still exclude the lowest bit as
it's verified after a subsequent load.
Kudos to Remi Tricot-Le Breton for reporting and bisecting this issue
with a reproducer.
No backport is needed since this was brought in 2.9-dev3 with commit
8178a5211 ("MAJOR: threads/plock: update the embedded library again").
The code is now on par with plock commit ada70fe.
Add a new MUX flag MX_FL_REVERSABLE. This value is used to indicate that
MUX instance supports connection reversal. For the moment, only HTTP/2
multiplexer is flagged with it.
This allows to dynamically check if reversal can be completed during MUX
installation. This will allow to relax requirement on config writing for
'tcp-request session attach-srv' which currently cannot be used mixed
with non-http/2 listener instances, even if used conditionnally with an
ACL.
Define a new error code for connection CO_ER_REVERSE. This will be used
to report an issue which happens on a connection targetted for reversal
before reverse process is completed.
This reverts commit 072e774939.
Doing h2load with h3 tests we notice this behavior:
Client ---- INIT no token SCID = a , DCID = A ---> Server (1)
Client <--- RETRY+TOKEN DCID = a, SCID = B ---- Server (2)
Client ---- INIT+TOKEN SCID = a , DCID = B ---> Server (3)
Client <--- INIT DCID = a, SCID = C ---- Server (4)
Client ---- INIT+TOKEN SCID = a, DCID = C ---> Server (5)
With (5) dropped by haproxy due to token validation.
Indeed the previous patch adds SCID of retry packet sent to the aad
of the token ciphering aad. It was useful to validate the next INIT
packets including the token are sent by the client using the new
provided SCID for DCID as mantionned into the RFC 9000.
But this stateless information is lost on received INIT packets
following the first outgoing INIT packet from the server because
the client is also supposed to re-use a second time the lastest
received SCID for its new DCID. This will break the token validation
on those last packets and they will be dropped by haproxy.
It was discussed there:
https://mailarchive.ietf.org/arch/msg/quic/7kXVvzhNCpgPk6FwtyPuIC6tRk0/
To resume: this is not the role of the server to verify the re-use of
retry's SCID for DCID in further client's INIT packets.
The previous patch must be reverted in all versions where it was
backported (supposed until 2.6)
When a stream is caught looping, we produce some output to help figure
its internal state explaining why it's looping. The problem is that this
debug output is quite old and the info it provides are quite insufficient
to debug a modern process, and since such bugs happen only once or twice
a year the situation doesn't improve.
On the other hand the output of "show sess all" is extremely detailed
and kept up to date with code evolutions since it's a heavily used
debugging tool.
This commit replaces the call to the totally outdated stream_dump() with
a call to strm_dump_to_buffer(), and removes the filters dump since they
are already emitted there, and it now produces much more exploitable
output:
[ALERT] (5936) : A bogus STREAM [0x7fa8dc02f660] is spinning at 5653514 calls per second and refuses to die, aborting now! Please report this error to developers:
0x7fa8dc02f660: [28/Sep/2023:09:53:08.811818] id=2 proto=tcpv4 source=127.0.0.1:58306
flags=0xc4a, conn_retries=0, conn_exp=<NEVER> conn_et=0x000 srv_conn=0x133f220, pend_pos=(nil) waiting=0 epoch=0x1
frontend=public (id=2 mode=http), listener=? (id=1) addr=127.0.0.1:4080
backend=public (id=2 mode=http) addr=127.0.0.1:61932
server=s1 (id=1) addr=127.0.0.1:7443
task=0x7fa8dc02fa40 (state=0x01 nice=0 calls=5749559 rate=5653514 exp=3s tid=1(1/1) age=1s)
txn=0x7fa8dc02fbf0 flags=0x3000 meth=1 status=-1 req.st=MSG_DONE rsp.st=MSG_RPBEFORE req.f=0x4c rsp.f=0x00
scf=0x7fa8dc02f5f0 flags=0x00000482 state=EST endp=CONN,0x7fa8dc02b4b0,0x05004001 sub=1 rex=58s wex=<NEVER>
h1s=0x7fa8dc02b4b0 h1s.flg=0x100010 .sd.flg=0x5004001 .req.state=MSG_DONE .res.state=MSG_RPBEFORE
.meth=GET status=0 .sd.flg=0x05004001 .sc.flg=0x00000482 .sc.app=0x7fa8dc02f660
.subs=0x7fa8dc02f608(ev=1 tl=0x7fa8dc02fae0 tl.calls=0 tl.ctx=0x7fa8dc02f5f0 tl.fct=sc_conn_io_cb)
h1c=0x7fa8dc0272d0 h1c.flg=0x0 .sub=0 .ibuf=0@(nil)+0/0 .obuf=0@(nil)+0/0 .task=0x7fa8dc0273f0 .exp=<NEVER>
co0=0x7fa8dc027040 ctrl=tcpv4 xprt=RAW mux=H1 data=STRM target=LISTENER:0x12840c0
flags=0x00000300 fd=32 fd.state=20 updt=0 fd.tmask=0x2
scb=0x7fa8dc02fb30 flags=0x00001411 state=EST endp=CONN,0x7fa8dc0300c0,0x05000001 sub=1 rex=58s wex=<NEVER>
h1s=0x7fa8dc0300c0 h1s.flg=0x4010 .sd.flg=0x5000001 .req.state=MSG_DONE .res.state=MSG_RPBEFORE
.meth=GET status=0 .sd.flg=0x05000001 .sc.flg=0x00001411 .sc.app=0x7fa8dc02f660
.subs=0x7fa8dc02fb48(ev=1 tl=0x7fa8dc02feb0 tl.calls=2 tl.ctx=0x7fa8dc02fb30 tl.fct=sc_conn_io_cb)
h1c=0x7fa8dc02ff00 h1c.flg=0x80000000 .sub=1 .ibuf=0@(nil)+0/0 .obuf=0@(nil)+0/0 .task=0x7fa8dc030020 .exp=<NEVER>
co1=0x7fa8dc02fcd0 ctrl=tcpv4 xprt=RAW mux=H1 data=STRM target=SERVER:0x133f220
flags=0x10000300 fd=33 fd.state=10421 updt=0 fd.tmask=0x2
req=0x7fa8dc02f680 (f=0x1840000 an=0x8000 pipe=0 tofwd=0 total=79)
an_exp=<NEVER> buf=0x7fa8dc02f688 data=(nil) o=0 p=0 i=0 size=0
htx=0xc18f60 flags=0x0 size=0 data=0 used=0 wrap=NO extra=0
res=0x7fa8dc02f6d0 (f=0x80000000 an=0x1400000 pipe=0 tofwd=0 total=0)
an_exp=<NEVER> buf=0x7fa8dc02f6d8 data=(nil) o=0 p=0 i=0 size=0
htx=0xc18f60 flags=0x0 size=0 data=0 used=0 wrap=NO extra=0
call trace(10):
| 0x59f2b7 [0f 0b 0f 1f 80 00 00 00]: stream_dump_and_crash+0x1f7/0x2bf
| 0x5a0d71 [e9 af e6 ff ff ba 40 00]: process_stream+0x19f1/0x3a56
| 0x68d7bb [49 89 c7 4d 85 ff 74 77]: run_tasks_from_lists+0x3ab/0x924
| 0x68e0b4 [29 44 24 14 8b 4c 24 14]: process_runnable_tasks+0x374/0x6d6
| 0x656f67 [83 3d f2 75 84 00 01 0f]: run_poll_loop+0x127/0x5a8
| 0x6575d7 [48 8b 1d 42 50 5c 00 48]: main+0x1b22f7
| 0x7fa8e0f35e45 [64 48 89 04 25 30 06 00]: libpthread:+0x7e45
| 0x7fa8e0e5a4af [48 89 c7 b8 3c 00 00 00]: libc:clone+0x3f/0x5a
Note that the output is subject to the global anon key so that IPs and
object names can be anonymized if required. It could make sense to
backport this and the few related previous patches next time such an
issue is reported.
There used to be two working modes for this function, a single-line one
and a multi-line one, the difference being made on the "eol" argument
which could contain either a space or an LF (and with the prefix being
adjusted accordingly). Let's get rid of the single-line mode as it's
what limits the output contents because it's difficult to produce
exploitable structured data this way. It was only used in the rare case
of spinning streams and applets and these are the ones lacking info. Now
a spinning stream produces:
[ALERT] (3511) : A bogus STREAM [0x227e7b0] is spinning at 5581202 calls per second and refuses to die, aborting now! Please report this error to developers:
strm=0x227e7b0,c4a src=127.0.0.1 fe=public be=public dst=s1
txn=0x2041650,3000 txn.req=MSG_DONE,4c txn.rsp=MSG_RPBEFORE,0
rqf=1840000 rqa=8000 rpf=80000000 rpa=1400000
scf=0x24af280,EST,482 scb=0x24af430,EST,1411
af=(nil),0 sab=(nil),0
cof=0x7fdb28026630,300:H1(0x24a6f60)/RAW((nil))/tcpv4(33)
cob=0x23199f0,10000300:H1(0x24af630)/RAW((nil))/tcpv4(32)
filters={}
call trace(11):
(...)
Since 2.4-dev18 with commit b4476c6a8 ("CLEANUP: freq_ctr: make
arguments of freq_ctr_total() const"), most of the freq_ctr readers
should be fine with a const, except that they were not updated to
reflect this and they continue to force variable on some functions
that call them. Let's update this. This could even be backported if
needed.
Added set-timeout for frontend side of session, so it can be used to set
custom per-client timeouts if needed. Added cur_client_timeout to fetch
client timeout samples.
Add reporting using send_log() for preconnect operation. This is minimal
to ensure we understand the current status of listener in active reverse
connect.
To limit logging quantity, only important transition are considered.
This requires to implement a minimal state machine as a new field in
receiver structure.
Here are the logs produced :
* Initiating : first time preconnect is enabled on a listener
* Error : last preconnect attempt interrupted on a connection error
* Reaching maxconn : all necessary connections were reversed and are
operational on a listener
When a connection is freed during preconnect before reversal, the error
must be notified to the listener to remove any connection reference and
rearm a new preconnect attempt. Currently, this can occur through 2 code
paths :
* conn_free() called directly by H2 mux
* error during conn_create_mux(). For this case, connection is flagged
with CO_FL_ERROR and reverse_connect task is woken up. The process
task handler is then responsible to call conn_free() for such
connection.
Duplicated steps where done both in conn_free() and process task
handler. These are now removed. To facilitate code maintenance,
dedicated operation have been centralized in a new function
rev_notify_preconn_err() which is called by conn_free().
This patch adds the ability to externalize and customize the code
of the computation of extra CIDs after the first one was derived from
the ODCID.
This is to prepare interoperability with extra components such as
different QUIC proxies or routers for instance.
To process the patch defines two function callbacks:
- the first one to compute a hash 64bits from the first generated CID
(itself continues to be derived from ODCID). Resulting hash is stored
into the 'quic_conn' and 64bits is chosen large enought to be able to
store an entire haproxy's CID.
- the second callback re-uses the previoulsy computed hash to derive
an extra CID using the custom algorithm. If not set haproxy will
continue to choose a randomized CID value.
Those two functions have also the 'cluster_secret' passed as an argument:
this way, it is usable for obfuscation or ciphering.
Function comments were outdated, probably because they have not been
updated during the previous refactors.
Fixing comments to better reflect the current behavior.
This may be backported up to 2.2, or even 2.0 by slightly adapting the
patch (in 2.0, such functions are documented in proto/pattern.h)
The ring lock was initially mostly used for the logs and used to inherit
its name in lock stats. Now that it's exclusively used by rings, let's
rename it accordingly.
The log server lock is pretty visible in perf top when using log samples
because it's taken for each server in turn while trying to validate and
update the log server's index. Let's change this for a CAS, since we have
the index and the range at hand now. This allow us to remove the logsrv
lock.
The test on 4 servers now shows a 3.7 times improvement thanks to much
lower contention. Without log sampling a test producing 4.4M logs/s
delivers 4.4M logs/s at 21 CPUs used, everything spent in the kernel.
After enabling 4 samples (1:4, 2:4, 3:4 and 4:4), the throughput would
previously drop to 1.13M log/s with 37 CPUs used and 75% spent in
process_send_log(). Now with this change, 4.25M logs/s are emitted,
using 26 CPUs and 22% in process_send_log(). That's a 3.7x throughput
improvement for a 30% global CPU usage reduction, but in practice it
mostly shows that the performance drop caused by having samples is much
less noticeable (each of the 4 servers has its index updated for each
log).
Note that in order to even avoid incrementing an index for each log srv
that is consulted, it would be more convenient to have a single index
per frontend and apply the modulus on each log server in turn to see if
the range has to be updated. It would then only perform one write per
range switch. However the place where this is done doesn't have access
to a frontend, so some changes would need to be performed for this, and
it would require to update the current range independently in each
logsrv, which is not necessarily easier since we don't know yet if we
can commit it.
By using a single long long to store both the current range and the
next index, we'll make it possible to perform atomic operations instead
of locking. Let's only regroup them for now under a new "curr_rg_idx".
The upper word is the range, the lower is the index.
This index is useless because it only serves to know when the global
index reached the end, while the global one already knows it. Let's
just drop it and perform the test on the global range.
It was verified with the following config that the first server continues
to take 1/10 of the traffic, the 2nd one 2/10, the 3rd one 3/10 and the
4th one 4/10:
log 127.0.0.1:10001 sample 1:10 local0
log 127.0.0.1:10002 sample 2,5:10 local0
log 127.0.0.1:10003 sample 3,7,9:10 local0
log 127.0.0.1:10004 sample 4,6,8,10:10 local0
The test of the log range is not very clear, in part due to the
reuse of the "curr_idx" name that happens at two levels. The call
to in_smp_log_range() applies to the smp_info's index to which 1 is
added: it verifies that the next index is still within the current
range.
Let's just have a local variable "next_index" in process_send_log()
that gets assigned the next index (current+1) and compare it to the
current range's boundaries. This makes the test much clearer. We can
then simply remove in_smp_log_range() that's no longer needed.
This reverts commit c618ed5ff4.
The list iterator is broken. As found by Fred, running QUIC single-
threaded shows that only the first connection is accepted because the
accepter relies on the element being initialized once detached (which
is expected and matches what MT_LIST_DELETE_SAFE() used to do before).
However while doing this in the quic_sock code seems to work, doing it
inside the macro show total breakage and the unit test doesn't work
anymore (random crashes). Thus it looks like the fix is not trivial,
let's roll this back for the time it will take to fix the loop.
In 1.9 with commit 627505d36 ("MINOR: freq_ctr: add swrate_add_scaled()
to work with large samples") we got the ability to indicate when adding
some values that they represent a number of samples. However there is an
issue in the calculation which is that the number of samples that is
added to the sum before the division in order to avoid fading away too
fast, is multiplied by the scale. The problem it causes is that this is
done in the negative part of the expression, and that as soon if the sum
of old_sum and v*s is too small (e.g. zero), we end up with a negative
value of -s.
This is visible in "show pools" which occasionally report a very large
value on "needed_avg" since 2.9, though the bug has been there for longer.
Indeed in 2.9 since they're hashed in buckets, it suffices that any
thread got one such error once for the sum to be wrong. One possible
impact is memory usage not shrinking after a short burst due to pools
refraining from releasing objects, believing they don't have enough.
This must be backported to all versions. Note that the opportunistic
version can be dropped before 2.8.
The new mt_list code supports exponential back-off on conflict, which
is important for use cases where there is contention on a large number
of threads. The API evolved a little bit and required some updates:
- mt_list_for_each_entry_safe() is now in upper case to explicitly
show that it is a macro, and only uses the back element, doesn't
require a secondary pointer for deletes anymore.
- MT_LIST_DELETE_SAFE() doesn't exist anymore, instead one just has
to set the list iterator to NULL so that it is not re-inserted
into the list and the list is spliced there. One must be careful
because it was usually performed before freeing the element. Now
instead the element must be nulled before the continue/break.
- MT_LIST_LOCK_ELT() and MT_LIST_UNLOCK_ELT() have always been
unclear. They were replaced by mt_list_cut_around() and
mt_list_connect_elem() which more explicitly detach the element
and reconnect it into the list.
- MT_LIST_APPEND_LOCKED() was only in haproxy so it was left as-is
in list.h. It may however possibly benefit from being upstreamed.
This required tiny adaptations to event_hdl.c and quic_sock.c. The
test case was updated and the API doc added. Note that in order to
keep include files small, the struct mt_list definition remains in
list-t.h (par of the internal API) and was ifdef'd out in mt_list.h.
A test on QUIC with both quictls 1.1.1 and wolfssl 5.6.3 on ARM64 with
80 threads shows a drastic reduction of CPU usage thanks to this and
the refined memory barriers. Please note that the CPU usage on OpenSSL
3.0.9 is significantly higher due to the excessive use of atomic ops
by openssl, but 3.1 is only slightly above 1.1.1 though:
- before: 35 Gbps, 3.5 Mpps, 7800% CPU
- after: 41 Gbps, 4.2 Mpps, 2900% CPU
This bug arrived with this commit in 2.9-dev3:
MEDIUM: quic: Allow the quic_conn memory to be asap released.
When sending packets from quic_cc_conn_io_cb(), e.g. when the quic_conn
object has been released and replaced by a lighter one (quic_cc_conn),
some counters may have to be incremented. But they were not reachable
because not shared between quic_conn and quic_cc_conn struct.
To fix this, one has only to move the ->cntrs counters from quic_conn
to QUIC_CONN_COMMON struct which is shared between both quic_cc_conn
Thank you to Tristan for having reported this in GH #2247.
No need to backport.
It's a bit frustrating sometimes to see pool checks catch a bug but not
provide exploitable information without a core.
Here we're adding a function "pool_inspect_item()" which is called just
before aborting in pool_check_pattern() and POOL_DEBUG_CHECK_MARK() and
which will display the error type, the pool's pointer and name, and will
try to check if the item's tag matches the pool, and if not, will iterate
over all pools to see if one would be a better candidate, then will try
to figure the last known caller and possibly other likely candidates if
the pool's tag is not sufficiently trusted. This typically helps better
diagnose corruption in use-after-free scenarios, or freeing to a pool
that differs from the one the object was allocated from, and will also
indicate calling points that may help figure where an object was last
released or allocated. The info is printed on stderr just before the
backtrace.
For example, the recent off-by-one test in the PPv2 changes would have
produced the following output in vtest logs:
*** h1 debug|FATAL: pool inconsistency detected in thread 1: tag mismatch on free().
*** h1 debug| caller: 0x62bb87 (conn_free+0x147/0x3c5)
*** h1 debug| pool: 0x2211ec0 ('pp_tlv_256', size 304, real 320, users 1)
*** h1 debug|Tag does not match. Possible origin pool(s):
*** h1 debug| tag: @0x2565530 = 0x2216740 (pp_tlv_128, size 176, real 192, users 1)
*** h1 debug|Recorded caller if pool 'pp_tlv_128':
*** h1 debug| @0x2565538 (+0184) = 0x62c76d (conn_recv_proxy+0x4cd/0xa24)
A mismatch in the allocated/released pool is already visible, and the
callers confirm it once resolved, where the allocator indeed allocates
from pp_tlv_128 and conn_free() releases to pp_tlv_256:
$ addr2line -spafe ./haproxy <<< $'0x62bb87\n0x62c76d'
0x000000000062bb87: conn_free at connection.c:568
0x000000000062c76d: conn_recv_proxy at connection.c:1177
In preparation for more detailed pool error reports, let's pass the
caller pointers to the check functions. This will be useful to produce
messages indicating where the issue happened.
When recording the caller of a pool_alloc(), we currently store it only
when the object comes from the cache and never when it comes from the
heap. There's no valid reason for this except that the caller's pointer
was not passed to pool_alloc_nocache(), so it used to set NULL there.
Let's just pass it down the chain.
These ones were still in cfgparse.c but they're not specific to the
config at all and may actually be used even when parsing cpu list
entries in /sys. Better move them where they can be reused.
cpu_map is 8.2kB/entry and there's one such entry per group, that's
~520kB total. In addition, the init code is still in haproxy.c enclosed
in ifdefs. Let's make this a dynamically allocated array in the cpuset
code and remove that init code.
Later we may even consider reallocating it once the number of threads
and groups is known, in order to shrink it a little bit, as the typical
setup with a single group will only need 8.2kB, thus saving half a MB
of RAM. This would require that the upper bound is placed in a variable
though.
This function takes on input a printf format for the file name, making
it particularly suitable for /proc or /sys entries which take a lot of
numbers. It also automatically trims the trailing CR and/or LF chars.
The function generate_random_cluster_secret() which initializes the cluster secret
when not supplied by configuration is buggy. There 1/256 that the cluster secret
string is empty.
To fix this, one stores the cluster as a reduced size first 128 bits of its own
SHA1 (160 bits) digest, if defined by configuration. If this is not the case, it
is initialized with a 128 bits random value. Furthermore, thus the cluster secret
is always initialized.
As the cluster secret is always initialized, there are several tests which
are for now on useless. This patch removes such tests (if(global.cluster_secret))
in the QUIC code part and at parsing time: no need to check that a cluster
secret was initialized with "quic-force-retry" option.
Must be backported as far as 2.6.
This patch implements the 'curves' keyword on server lines as well as
the 'ssl-default-server-curves' keyword in the global section.
It also add the keyword on the server line in the ssl_curves reg-test.
These keywords allow the configuration of the curves list for a server.
We currently know the number of tasks in the run queue that are niced,
and we don't expose it. It's too bad because it can give a hint about
what share of the load is relevant. For example if one runs a Lua
script that was purposely reniced, or if a stats page or the CLI is
hammered with slow operations, seeing them appear there can help
identify what part of the load is not caused by the traffic, and
improve monitoring systems or autoscalers.
When building the secondary signature for cache entries when vary is
enabled, the referer part of the signature was a simple crc32 of the
first referer header.
This patch changes it to a 64bits hash based of xxhash algorithm with a
random seed built during init. This will prevent "malicious" hash
collisions between entries of the cache.
We previously had postparsing logic but only for logsrv sinks, but now we
need to make this operation on logsrv directly instead of sinks to prepare
for additional postparsing logic that is not sink-specific.
To do this, we migrated post_sink_resolve() and sink_postresolve_logsrvs()
to their postresolve_logsrvs() and postresolve_logsrv_list() equivalents.
Then, we split postresolve_logsrv_list() so that the sink-only logic stays
in sink.c (sink_resolve_logsrv_buffer() function), and the "generic"
target part stays in log.c as resolve_logsrv().
Error messages formatting was preserved as far as possible but some slight
variations are to be expected.
As for the functional aspect, no change should be expected.
All applets only check the -1 error value (need room) for applet_put*
functions while the underlying functions may also return -2 if the input is
closed or -3 if the data length is invalid. It means applets already handle
other cases by their own.
The API should be fixed but for now, to ease backports, we only fix
applet_put* functions to always return -1 on error. This way, at least for
the applets point of view, the API is consistent.
This patch should be backported to 2.8. Probably not further. Except if we
suspect it could fix a bug.
Due to the fact that several variable values (rtt_var, srtt) were stored as multiple
of their real values, some calculations were less accurate as expected.
Stop storing 4*rtt_var values, and 8*srtt values.
Adjust all the impacted statements.
Must be backported as far as 2.6.
This detects when there are more threads bound via cpu-map than CPUs
enabled in cpu-map, or when there are more total threads than the total
number of CPUs available at boot (for unbound threads) and configured
for bound threads. In this case, a warning is emitted to explain the
problems it will cause, and explaining how to address the situation.
Note that some configurations will not be detected as faulty because
the algorithmic complexity to resolve all arrangements grows in O(N!).
This means that having 3 threads on 2 CPUs and one thread on 2 CPUs
will not be detected as it's 4 threads for 4 CPUs. But at least configs
such as T0:(1,4) T1:(1,4) T2:(2,4) T3:(3,4) will not trigger a warning
since they're valid.
It's very easy to mess up with some cpu-map directives and to leave
some thread unbound. Let's add a test that checks that either all
threads are bound or none are bound, but that we do not face the
intermediary situation where some are pinned and others are left
wandering around, possibly on the same CPUs as bound ones.
Note that this should not be backported, or maybe turned into a
notice only, as it appears that it will easily catch invalid
configs and that may break updates for some users.
Till now the CPUs that were bound were only retrieved in
thread_cpus_enabled() in order to count the number of CPUs allowed,
and it relied on arch-specific code.
Let's slightly arrange this into ha_cpuset_detect_bound() that
reuses the ha_cpuset struct and the accompanying code. This makes
the code much clearer without having to carry along some arch-specific
stuff out of this area.
Note that the macos-specific code used in thread.c to only count
online CPUs but not retrieve a mask, so for now we can't infer
anything from it and can't implement it.
In addition and more importantly, this function is reliable in that
it will only return a value when the detection is accurate, and will
not return incomplete sets on operating systems where we don't have
an exact list, such as online CPUs.
When building without threads, the recently introduced BUG_ON(tid != 0)
turns to a constant expression that evaluates to 0 and that is not used,
resulting in this warning:
src/connection.c: In function 'conn_free':
src/connection.c:584:3: warning: statement with no effect [-Wunused-value]
This is because the whole thing is declared as an expression for clarity.
Make it return void to avoid this. No backport is needed.
This adds a new option for the Makefile USE_OPENSSL_AWSLC, and
update the documentation with instructions to use HAProxy with
AWS-LC.
Update the type of the OCSP callback retrieved with
SSL_CTX_get_tlsext_status_cb with the actual type for
libcrypto versions greater than 1.0.2. This doesn't affect
OpenSSL which casts the callback to void* in SSL_CTX_ctrl.
For the same reason than the previous patch, we must not block the sends
when there is a pending shutdown. In other words, we must consider the sends
are allowed when there is a pending shutdown.
This patch must slowly be backported as far as 2.2. It should partially fix
issue #2249.
The progressive adoption of OpenSSL 3 and its abysmal handshake
performance has started to reveal situations where it simply isn't
possible anymore to succesfully run health checks on many servers,
because between the moment all the checks are started and the moment
the handshake finally completes, the timeout has expired!
This also has consequences on production traffic which gets
significantly delayed as well, all that for lots of checks. While it's
possible to increase the check delays, it doesn't solve everything as
checks still take a huge amount of time to converge in such conditions.
Here we take a different approach by permitting to enforce the maximum
concurrent checks per thread limitation and implementing an ordered
queue. Thanks to this, if a thread about to start a check has reached
its limit, it will add the check at the end of a queue and it will be
processed once another check is finished. This proves to be extremely
efficient, with all checks completing in a reasonable amount of time
and not being disturbed by the rest of the traffic from other checks.
They're just cycling slower, but at the speed the machine can handle.
One must understand however that if some complex checks perform multiple
exchanges, they will take a check slot for all the required duration.
This is why the limit is not enforced by default.
Tests on SSL show that a limit of 5-50 checks per thread on local
servers gives excellent results already, so that could be a good starting
point.
