To be able to move wait_event from the stream-interface to the conn-stream,
we must be prepare to handle errors when a mux is attached to a conn-stream.
Indeed, the wait_event's tasklet will be allocated when both a mux and a
stream will be both attached to a stream. So, we must be prepared to handle
allocation errors.
si_connect() is moved in backend.c and renamed as do_connect_server(). In
addition, the function now manipulate a stream instead of a
stream-interface.
The stream-interface state (SI_ST_*) is now in the conn-stream. It is a
mechanical replacement for now. Nothing special. SI_ST_* and SI_SB_* were
renamed accordingly. Utils functions to manipulate these infos were moved
under the conn-stream scope.
But it could be good to keep in mind that this part should be
reworked. Indeed, at the CS level, we only need to know if it is ready to
receive or to send. The state of conn-stream from INI to EST is only used on
the server side. The client CS is immediately set to EST. Thus current
SI_ST_* states should probably be moved to the stream to reflect the server
connection state during the establishment stage.
Only the server side is concerned by the stream-interface error type. It is
useless to have an err_type field on the client side. So, it is now move to
the stream. SI_ET_* are renames STRM_ET_* and moved in stream-t.h header
file.
Flag to get the source ip/port with getsockname is now handled at the stream
level. Thus SI_FL_SRC_ADDR stream-int flag is replaced by SF_SRC_ADDR stream
flag.
Flags to disable lingering and half-close are now handled at the conn-stream
level. Thus SI_FL_NOLINGER and SI_FL_NOHALF stream-int flags are replaced by
CS_FL_NOLINGER and CS_FL_NOHALF conn-stream flags.
Instead of relying on the conn-stream error, via CS_FL_ERR flags, we now
directly use the error at the endpoint level with the flag CS_EP_ERROR. It
should be safe to do so. But we must be careful because it is still possible
that an error is processed too early. Anyway, a conn-stream has always a
valid endpoint, maybe detached from any endpoint, but valid.
SI_FL_ERR is removed and replaced by CS_FL_ERROR. It is a transient patch
because the idea is to rely on the endpoint to handle errors at this
level. But if for any reason it is not possible, the stream-interface flags
will still be replaced.
The expiration date in the stream-interface was only used on the server side
to set the connect, queue or turn-around timeout. It was checked on the
frontend stream-interface, but never used concretely. So it was removed and
replaced by a connect expiration date in the stream itself. Thus, SI_FL_EXP
flag in stream-interfaces is replaced by a stream flag, SF_CONN_EXP.
The source and destination addresses at the applicative layer are moved from
the stream-interface to the conn-stream. This simplifies a bit the code and
it is a logicial step to remove the stream-interface.
The conn_retries counter was set to the max value and decremented at each
connection retry. Thus the counter reflected the number of retries left and
not the real number of retries. All calculations of redispatch or reporting
of number of retries experienced were made using subtracts from the
configured retries, which was complicated and didn't bring any benefit.
Now, this counter is set to 0 and incremented at each retry. We know we've
reached the maximum allowed connection retries by comparing it to the
configured value. In all other cases, we directly use the counter.
This patch should address the feature request #1608.
The conn_retries counter may be moved into the stream structure. It only
concerns the connection establishment. The frontend stream-interface does not
use it. So it is a logical change.
At many places, we now use the new CS functions to get a stream or a channel
from a conn-stream instead of using the stream-interface API. It is the
first step to reduce the scope of the stream-interfaces. The main change
here is about the applet I/O callback functions. Before the refactoring, the
stream-interface was the appctx owner. Thus, it was heavily used. Now, as
far as possible,the conn-stream is used. Of course, it remains many calls to
the stream-interface API.
All old flags CS_FL_* are now moved in the endpoint scope and renamed
CS_EP_* accordingly. It is a systematic replacement. There is no true change
except for the health-check and the endpoint reset. Here it is a bit special
because the same conn-stream is reused. Thus, we must handle endpoint
allocation errors. To do so, cs_reset_endp() has been adapted.
Thanks to this last change, it will now be possible to simplify the
multiplexer and probably the applets too. A review must also be performed to
remove some flags in the channel or the stream-interface. The HTX will
probably be simplified too. Finally, there is now some place in the
conn-stream to move info from the stream-interface.
The conn-stream endpoint is now shared between the conn-stream and the
applet or the multiplexer. If the mux or the applet is created first, it is
responsible to also create the endpoint and share it with the conn-stream.
If the conn-stream is created first, it is the opposite.
When the endpoint is only owned by an applet or a mux, it is called an
orphan endpoint (there is no conn-stream). When it is only owned by a
conn-stream, it is called a detached endpoint (there is no mux/applet).
The last entity that owns an endpoint is responsible to release it. When a
mux or an applet is detached from a conn-stream, the conn-stream
relinquishes the endpoint to recreate a new one. This way, the endpoint
state is never lost for the mux or the applet.
It is a transient commit to prepare next changes. Now, when a conn-stream is
created from an applet or a multiplexer, an endpoint is always provided. In
addition, the API to create a conn-stream was specialized to have one
function per type.
The next step will be to share the endpoint structure.
Some CS flags, only related to the endpoint, are moved into the endpoint
struct. More will probably moved later. Those ones are not critical. So it
is pretty safe to move them now and this will ease next changes.
This change is only significant for the multiplexer part. For the applets,
the context and the endpoint are the same. Thus, there is no much change. For
the multiplexer part, the connection was used to set the conn-stream
endpoint and the mux's stream was the context. But it is a bit strange
because once a mux is installed, it takes over the connection. In a
wonderful world, the connection should be totally hidden behind the mux. The
stream-interface and, in a lesser extent, the stream, still access the
connection because that was inherited from the pre-multiplexer era.
Now, the conn-stream endpoint is the mux's stream (an opaque entity for the
conn-stream) and the connection is the context. Dedicated functions have
been added to attached an applet or a mux to a conn-stream.
Thanks to all previous changes, it is now possible to move the
stream-interface into the conn-stream. To do so, some SI functions are
removed and their conn-stream counterparts are added. In addition, the
conn-stream is now responsible to create and release the
stream-interface. While the stream-interfaces were inlined in the stream
structure, there is now a pointer in the conn-stream. stream-interfaces are
now dynamically allocated. Thus a dedicated pool is added. It is a temporary
change because, at the end, the stream-interface structure will most
probably disappear.
To be able to move the stream-interface from the stream to the conn-stream,
all access to the SI is done via the conn-stream. This patch is limited to
the backend part.
frontend and backend conn-streams are now directly accesible from the
stream. This way, and with some other changes, it will be possible to remove
the stream-interfaces from the stream structure.
Thanks to previous changes, it is now possible to set an appctx as endpoint
for a conn-stream. This means the appctx is no longer linked to the
stream-interface but to the conn-stream. Thus, a pointer to the conn-stream
is explicitly stored in the stream-interface. The endpoint (connection or
appctx) can be retrieved via the conn-stream.
The backend conn-stream is no longer released on connection retry. This
means the conn-stream is detached from the underlying connection but not
released. Thus, during connection retries, the stream has always an
allocated conn-stream with no connection. All previous changes were made to
make this possible.
Note that .attach() mux callback function was changed to get the conn-stream
as argument. The muxes are no longer responsible to create the conn-stream
when a server connection is attached to a stream.
The conn-stream will progressively replace the stream-interface. Thus, a
stream will have to allocate the backend conn-stream during its
creation. This means it will be possible to have a conn-stream with no
connection. To prepare this change, we test the conn-stream's connection
when we retrieve it.
At many places we use construct such as:
if (objt_server(blah))
do_something(objt_server(blah));
At -O2 the compiler manages to simplify the operation and see that the
second one returns the same result as the first one. But at -O1 that's
not always the case, and the compiler is able to emit a second
expression and sees the potential null that results from it, and may
warn about a potential null deref (e.g. with gcc-6.5). There are two
solutions to this:
- either the result of the first test has to be passed to a local
variable
- or the second reference ought to be unchecked using the __objt_*
variant.
This patch fixes all occurrences at once by taking the second approach
(the least intrusive). For constructs like:
objt_server(blah) ? objt_server(blah)->name : "no name"
a macro could be useful. It would for example take the object type
(server), the field name (name) and the default value. But there
are probably not enough occurrences across the whole code for this
to really matter.
This should be backported wherever it applies.
In alloc_dst_address(), the client destination address must only be
retrieved when we are sure to use it. Most of time, this save a syscall to
getsockname(). It is not a bugfix in itself. But it revealed a bug in the
QUIC part. The CO_FL_ADDR_TO_SET flag is not set when the destination
address is create for anew quic client connection.
Handle properly websocket streams if the server uses an ALPN with both
h1 and h2. Add a new field h2_ws in the server structure. If set to off,
reuse is automatically disable on backend and ALPN is forced to http1.x
if possible. Nothing is done if on.
Implement a mechanism to be able to use a different http version for
websocket streams. A new server member <ws> represents the algorithm to
select the protocol. This can overrides the server <proto>
configuration. If the connection uses ALPN for proto selection, it is
updated for websocket streams to select the right protocol.
Three mode of selection are implemented :
- auto : use the same protocol between non-ws and ws streams. If ALPN is
use, try to update it to "http/1.1"; this is only done if the server
ALPN contains "http/1.1".
- h1 : use http/1.1
- h2 : use http/2.0; this requires the server to support RFC8441 or an
error will be returned by haproxy.
Add a new parameter force_mux_ops. This will be useful to specify an
alternative to the srv->mux_proto field. If non-NULL, it will be use to
force the mux protocol wether srv->mux_proto is set or not.
This argument will become useful to install a mux for non-standard
streams, most notably websocket streams.
At a few places we were still using protocol_by_family() instead of
the richer protocol_lookup(). The former is limited as it enforces
SOCK_STREAM and a stream protocol at the control layer. At least with
protocol_lookup() we don't have this limitationn. The values were still
set for now but later we can imagine making them configurable on the
fly.
Client source and destination addresses at stream level are used to initiate
the connections to a server. For now, stream-interface addresses are never
set. So, thanks to the fallback mechanism, no changes are expected with this
patch. But its purpose is to rely on addresses at the appropriate level when
set instead of those at the connection level.
Skip the hash connection calcul when reuse must not be used in
connect_server() : this is the case for TCP proxies. This should result
in slightly better performance when using this use-case.
In connect_server(), if http-reuse always is set, the backend connection
is inserted into the available tree as soon as created. However, the
hash connection field is only set later at the end of the function.
This seems to have no impact as the hash connection field is always
position before a lookup. However, this is not a proper usage of ebmb
API. Fix this by setting the hash connection field before the insertion
into the avail tree.
This must be backported up to 2.4.
Add traces in connect_server() to debug idle connection reuse. These
are attached to stream trace module, as it's already in use in
backend.c with the macro TRACE_SOURCE.
It is not yet used but thanks to this patch, it will be possible to resolve
arguments found in defaults sections. However, there is some restrictions:
* For FE (frontend) or BE (backend) arguments, if the proxy is explicity
defined, there is no change. But for implicit proxy (not specified), the
argument points on the default proxy. when a sample fetch using this
kind of argument is evaluated, the default proxy replaced by the current
one.
* For SRV (server) and TAB (stick-table)arguments, the proxy must always
be specified. Otherwise an error is reported.
This patch is mandatory to support TCP/HTTP rules in defaults sections.
A number of files currently access activity counters but rely on their
definitions to be inherited from other files (task.c, backend.c hlua.c,
sock.c, pool.c, stats.c, fd.c).
backend.c, all muxes, backend.c started manipulating ebmb_nodes with
the introduction of idle conns but the types were inherited through
other includes. Let's add ebmbtree.h there.
One was in backend.c and the other one in hlua.c. No other candidate
was found with "git grep '^#if\s*USE'". It's worth noting that 3
other such tests exist for SSL_OP_NO_{SSLv3,TLSv1_1,TLSv1_2} but
that these ones are properly set to 0 in openssl-compat.h when not
defined.
This option had always been broken in HTX, which means that the first
breakage appeared in 1.9, that it was broken by default in 2.0 and that
no workaround existed starting with 2.1. The way this option works is
praticularly unfit to the rest of the configuration and to the internal
architecture. It had some uses when it was introduced 14 years ago but
nowadays it's possible to do much better and more reliable using a
set of "http-request set-dst" and "http-request set-uri" rules, which
additionally are compatible with DNS resolution (via do-resolve) and
are not exclusive to normal load balancing. The "option-http_proxy"
example config file was updated to reflect this.
The option is still parsed so that an error message gives hints about
what to look for.
Replace http_get_path by the http_uri_parser API. The new functions is
renamed http_parse_path. Replace duplicated code for scheme and
authority parsing by invocations to http_parse_scheme/authority.
If no scheme is found for an URI detected as an absolute-uri/authority,
consider it to be an authority format : no path will be found. For an
absolute-uri or absolute-path, use the remaining of the string as the
path. A new http_uri_parser state is declared to mark the path parsing
as done.
This basically undoes the API changes that were performed by commit
0274286dd ("BUG/MAJOR: server: fix deadlock when changing maxconn via
agent-check") to address the deadlock issue: since process_srv_queue()
doesn't use the server lock anymore, it doesn't need the "server_locked"
argument, so let's get rid of it before it gets used again.
This reverts commit c83e45e9b001591633188a480a896c935d3c9625.
The recent changes since 5304669e1 MEDIUM: queue: make
pendconn_process_next_strm() only return the pendconn opened a tiny race
condition between stream_free() and process_srv_queue(), as the pendconn
is accessed outside of the lock, possibly while it's being freed. A
different approach is required.
In 1.4, consistent hashing was brought by commit 6b2e11be1 ("[MEDIUM]
backend: implement consistent hashing variation") which took care of
replacing all direct calls to map_get_server_rr() with an alternate
call to chash_get_next_server() if consistent hash was being used.
One of them, however, cannot happen because a preliminary test for
static round-robin is being done prior to the call, so we're certain
that if it matches it cannot use a consistent hash tree.
Let's remove it.
This basically undoes the API changes that were performed by commit
0274286dd ("BUG/MAJOR: server: fix deadlock when changing maxconn via
agent-check") to address the deadlock issue: since process_srv_queue()
doesn't use the server lock anymore, it doesn't need the "server_locked"
argument, so let's get rid of it before it gets used again.
This essentially reverts commit 2b4370078 ("MINOR: lb/api: let callers
of take_conn/drop_conn tell if they have the lock") that was merged
during 2.4 before the various locks could be eliminated at the lower
layers. Passing that information complicates the cleanup of the queuing
code and it's become useless.
The server_parse_maxconn_change_request locks the server lock. However,
this function can be called via agent-checks or lua code which already
lock it. This bug has been introduced by the following commit :
commit 79a88ba3d09f7e2b73ae27cb5d24cc087a548fa6
BUG/MAJOR: server: prevent deadlock when using 'set maxconn server'
This commit tried to fix another deadlock with can occur because
previoulsy server_parse_maxconn_change_request requires the server lock
to be held. However, it may call internally process_srv_queue which also
locks the server lock. The locking policy has thus been updated. The fix
is functional for the CLI 'set maxconn' but fails to address the
agent-check / lua counterparts.
This new issue is fixed in two steps :
- changes from the above commit have been reverted. This means that
server_parse_maxconn_change_request must again be called with the
server lock.
- to counter the deadlock fixed by the above commit, process_srv_queue
now takes an argument to render the server locking optional if the
caller already held it. This is only used by
server_parse_maxconn_change_request.
The above commit was subject to backport up to 1.8. Thus this commit
must be backported in every release where it is already present.
When reusing a backend connection, do not reapply the SNI on the
connection. It should already be defined when the connection was
instantiated on a previous connect_server invocation. As the SNI is a
parameter used to select a connection, only connection with same value
can be reused.
The impact of this bug is unknown and may be null. No memory leak has
been reported by valgrind. So this is more a cleaning fix.
This commit relies on the SF_SRV_REUSED flag and thus depends on the
following fix :
BUG/MINOR: backend: restore the SF_SRV_REUSED flag original purpose
This should be backported up to 2.4.
