Commit cc87a11 ("MEDIUM: tcp: add register keyword system.") broke the
TCP ruleset by merging custom rules and accept. It was fixed a first time
by commit e91ffd0 ("BUG/MAJOR: tcp: only call registered actions when
they're registered") but the accept action still didn't work anymore
and was causing the matching rule to simply be ignored.
Since the code introduced a very fragile behaviour by not even mentionning
that accept and custom were silently merged, let's fix this once for all by
adding an explicit check for the accept action. Nevertheless, as previously
mentionned, the action should be changed so that custom is the only action
and the continue vs break indication directly comes from the callee.
No backport is needed, this bug only affects 1.6-dev.
This patch adds support of variables during the processing of each stream. The
variables scope can be set as 'session', 'transaction', 'request' or 'response'.
The variable type is the type returned by the assignment expression. The type
can change while the processing.
The allocated memory can be controlled for each scope and each request, and for
the global process.
This patch permits to register a new keyword with the keyword "tcp-request content"
'tcp-request connection", tcp-response content", http-request" and "http-response"
which is identified only by matching the start of the keyword.
for example, we register the keyword "set-var" with the option "match_pfx"
and the configuration keyword "set-var(var_name)" matchs this entry.
Actually, the tcp-request and tcp-response custom ation are always final
actions. This patch create a new type of action that can permit to
continue the evaluation of tcp-request and tcp-response processing.
This patch removes the structs "session", "stream" and "proxy" from
the sample-fetches and converters function prototypes.
This permits to remove some weight in the prototype call.
Commit cc87a11 ("MEDIUM: tcp: add register keyword system.") introduced
the registration of new keywords for TCP rulesets. Unfortunately it
replaced the "accept" action with an unconditionnal call to the rule's
action function, resulting in an immediate segfault when using the
"accept" action in a TCP ruleset.
This bug reported by Baptiste Assmann was introduced in 1.6-dev1, no
backport is needed.
Commit bc4c1ac ("MEDIUM: http/tcp: permit to resume http and tcp custom
actions") introduced the ability to interrupt and restart processing in
the middle of a TCP/HTTP ruleset. But it doesn't do it in a consistent
way : it checks current_rule_list, immediately dereferences current_rule,
which is only set in certain cases and never cleared. So that broke the
tcp-request content rules when the processing was interrupted due to
missing data, because current_rule was not yet set (segfault) or could
have been inherited from another ruleset if it was used in a backend
(random behaviour).
The proper way to do it is to always set current_rule before dereferencing
it. But we don't want to set it for all rules because we don't want any
action to provide a checkpointing mechanism. So current_rule is set to NULL
before entering the loop, and only used if not NULL and if current_rule_list
matches the current list. This way they both serve as a guard for the other
one. This fix also makes the current rule point to the rule instead of its
list element, as it's much easier to manipulate.
No backport is needed, this is 1.6-specific.
It passes a NULL wherever a stream was needed (acl_exec_cond() and
action_ptr mainly). It can still track the connection rate correctly
and block based on ACLs.
Many such function need a session, and till now they used to dereference
the stream. Once we remove the stream from the embryonic session, this
will not be possible anymore.
So as of now, sample fetch functions will be called with this :
- sess = NULL, strm = NULL : never
- sess = valid, strm = NULL : tcp-req connection
- sess = valid, strm = valid, strm->txn = NULL : tcp-req content
- sess = valid, strm = valid, strm->txn = valid : http-req / http-res
All of them can now retrieve the HTTP transaction *if it exists* from
the stream and be sure to get NULL there when called with an embryonic
session.
The patch is a bit large because many locations were touched (all fetch
functions had to have their prototype adjusted). The opportunity was
taken to also uniformize the call names (the stream is now always "strm"
instead of "l4") and to fix indent where it was broken. This way when
we later introduce the session here there will be less confusion.
Now this one is dynamically allocated. It means that 280 bytes of memory
are saved per TCP stream, but more importantly that it will become
possible to remove the l7 pointer from fetches and converters since
it will be deduced from the stream and will support being null.
A lot of care was taken because it's easy to forget a test somewhere,
and the previous code used to always trust s->txn for being valid, but
all places seem to have been visited.
All HTTP fetch functions check the txn first so we shouldn't have any
issue there even when called from TCP. When branching from a TCP frontend
to an HTTP backend, the txn is properly allocated at the same time as the
hdr_idx.
The header captures are now general purpose captures since tcp rules
can use them to capture various contents. That removes a dependency
on http_txn that appeared in some sample fetch functions and in the
order by which captures and http_txn were allocated.
Interestingly the reset of the header captures were done at too many
places as http_init_txn() used to do it while it was done previously
in every call place.
When s->si[0].end was dereferenced as a connection or anything in
order to retrieve information about the originating session, we'll
now use sess->origin instead so that when we have to chain multiple
streams in HTTP/2, we'll keep accessing the same origin.
Just like for the listener, the frontend is session-wide so let's move
it to the session. There are a lot of places which were changed but the
changes are minimal in fact.
With HTTP/2, we'll have to support multiplexed streams. A stream is in
fact the largest part of what we currently call a session, it has buffers,
logs, etc.
In order to catch any error, this commit removes any reference to the
struct session and tries to rename most "session" occurrences in function
names to "stream" and "sess" to "strm" when that's related to a session.
The files stream.{c,h} were added and session.{c,h} removed.
The session will be reintroduced later and a few parts of the stream
will progressively be moved overthere. It will more or less contain
only what we need in an embryonic session.
Sample fetch functions and converters will have to change a bit so
that they'll use an L5 (session) instead of what's currently called
"L4" which is in fact L6 for now.
Once all changes are completed, we should see approximately this :
L7 - http_txn
L6 - stream
L5 - session
L4 - connection | applet
There will be at most one http_txn per stream, and a same session will
possibly be referenced by multiple streams. A connection will point to
a session and to a stream. The session will hold all the information
we need to keep even when we don't yet have a stream.
Some more cleanup is needed because some code was already far from
being clean. The server queue management still refers to sessions at
many places while comments talk about connections. This will have to
be cleaned up once we have a server-side connection pool manager.
Stream flags "SN_*" still need to be renamed, it doesn't seem like
any of them will need to move to the session.
The purpose of these two macros will be to pass via the session to
find the relevant stream interfaces so that we don't need to store
the ->cons nor ->prod pointers anymore. Currently they're only defined
so that all references could be removed.
Note that many places need a second pass of clean up so that we don't
have any chn_prod(&s->req) anymore and only &s->si[0] instead, and
conversely for the 3 other cases.
The channels were pointers to outside structs and this is not needed
anymore since the buffers have moved, but this complicates operations.
Move them back into the session so that both channels and stream interfaces
are always allocated for a session. Some places (some early sample fetch
functions) used to validate that a channel was NULL prior to dereferencing
it. Now instead we check if chn->buf is NULL and we force it to remain NULL
until the channel is initialized.
Later, the processing of some actions needs to be interrupted and resumed
later. This patch permit to resume the actions. The actions that needs
to run with the resume mode are not yet avalaible. It will be soon with
Lua patches. So the code added by this patch is untestable for the moment.
The list of "tcp_exec_req_rules" cannot resme because is called by the
unresumable function "accept_session".
This patch introduces an action keyword registration system for TCP
rulesets similar to what is available for HTTP rulesets. This sytem
will be useful with lua.
On Linux since 2.6.37, it's possible to set the socket timeout for
pending outgoing data, with an accuracy of 1 millisecond. This is
pretty handy to deal with dead connections to clients and or servers.
For now we only implement it on the frontend side (bind line) so
that when a client disappears from the net, we're able to quickly
get rid of its connection and possibly release a server connection.
This can be useful with long-lived connections where an application
level timeout is not suited because long pauses are expected (remote
terminals, connection pools, etc).
Thanks to Thijs Houtenbos and John Eckersberg for the suggestion.
create_server_socket() used to dereference objt_server(conn->target),
but if the target is not a server (eg: a proxy) then it's NULL and we
get a segfault. This can be reproduced with a proxy using "dispatch"
with no server, even when namespaces are disabled, because that code
is not #ifdef'd. The fix consists in first checking if the target is
a server.
This fix does not need to be backported, this is 1.6-only.
This patch makes it possible to create binds and servers in separate
namespaces. This can be used to proxy between multiple completely independent
virtual networks (with possibly overlapping IP addresses) and a
non-namespace-aware proxy implementation that supports the proxy protocol (v2).
The setup is something like this:
net1 on VLAN 1 (namespace 1) -\
net2 on VLAN 2 (namespace 2) -- haproxy ==== proxy (namespace 0)
net3 on VLAN 3 (namespace 3) -/
The proxy is configured to make server connections through haproxy and sending
the expected source/target addresses to haproxy using the proxy protocol.
The network namespace setup on the haproxy node is something like this:
= 8< =
$ cat setup.sh
ip netns add 1
ip link add link eth1 type vlan id 1
ip link set eth1.1 netns 1
ip netns exec 1 ip addr add 192.168.91.2/24 dev eth1.1
ip netns exec 1 ip link set eth1.$id up
...
= 8< =
= 8< =
$ cat haproxy.cfg
frontend clients
bind 127.0.0.1:50022 namespace 1 transparent
default_backend scb
backend server
mode tcp
server server1 192.168.122.4:2222 namespace 2 send-proxy-v2
= 8< =
A bind line creates the listener in the specified namespace, and connections
originating from that listener also have their network namespace set to
that of the listener.
A server line either forces the connection to be made in a specified
namespace or may use the namespace from the client-side connection if that
was set.
For more documentation please read the documentation included in the patch
itself.
Signed-off-by: KOVACS Tamas <ktamas@balabit.com>
Signed-off-by: Sarkozi Laszlo <laszlo.sarkozi@balabit.com>
Signed-off-by: KOVACS Krisztian <hidden@balabit.com>
There's an issue when using SO_ORIGINAL_DST to retrieve the original
destination of a connection's address before being translated by
Netfilter's DNAT/REDIRECT or the old TPROXY. SO_ORIGINAL_DST is
able to retrieve an IPv4 address when the original destination was
IPv4 mapped into IPv6. At first glance it's not a big deal, but it
is for logging and for the proxy protocol, because we then have
two different address families for the source and destination. In
this case, the proxy protocol correctly detects the issue and emits
"UNKNOWN".
In order to fix this, we perform getsockname() first, and only if
the address family is AF_INET, then we perform the getsockopt() call.
This fix must be backported to 1.5, and probably even to 1.4 and 1.3.
During a tcp connection setup in tcp_connect_server(), we check if
there are pending data to start polling for writes immediately. We
also use the same test to know if we can disable the quick ack and
merge the first data packet with the connection's ACK. This last
case is also valid for the proxy protocol.
The problem lies in the way it's done, as the "data" variable is
improperly completed with the presence of the proxy protocol, resulting
in the connection being polled for data writes if the proxy protocol is
enabled. It's not a big issue per se, except that the proxy protocol
uses the fact that we're polling for data to know if it can use MSG_MORE.
This causes no problem on HTTP/HTTPS, but with banner protocols, it
introduces a 200ms delay if the server waits for the PROXY header.
This has been caused by the connection management changes introduced in
1.5-dev12, specifically commit a1a7474 ("MEDIUM: proxy-proto: don't use
buffer flags in conn_si_send_proxy()"), so this fix must be backported
to 1.5.
MAX_SESS_STKCTR allows one to define the number of stick counters that can
be used in parallel in track-sc* rules. The naming of this macro creates
some confusion because the value there is sometimes used as a max instead
of a count, and the config parser accepts values from 0 to MAX_SESS_STKCTR
and the processing ignores anything tracked on the last one. This means
that by default, track-sc3 is allowed and ignored.
This fix must be backported to 1.5 where the problem there only affects
TCP rules.
A config where a tcp-request rule appears after an http-request rule
might seem valid but it is not. So let's report a warning about this
since this case is hard to detect by the naked eye.
As a consequence of various recent changes on the sample conversion,
a corner case has emerged where it is possible to wait forever for a
sample in track-sc*.
The issue is caused by the fact that functions relying on sample_process()
don't all exactly work the same regarding the SMP_F_MAY_CHANGE flag and
the output result. Here it was possible to wait forever for an output
sample from stktable_fetch_key() without checking the SMP_OPT_FINAL flag.
As a result, if the client connects and closes without sending the data
and haproxy expects a sample which is capable of coming, it will ignore
this impossible case and will continue to wait.
This change adds control for SMP_OPT_FINAL before waiting for extra data.
The various relevant functions have been better documented regarding their
output values.
This fix must be backported to 1.5 since it appeared there.
In order to fix the abstact socket pause mechanism during soft restarts,
we'll need to proceed differently depending on the socket protocol. The
pause_listener() function already supports some protocol-specific handling
for the TCP case.
This commit makes this cleaner by adding a new ->pause() function to the
protocol struct, which, if defined, may be used to pause a listener of a
given protocol.
For now, only TCP has been adapted, with the specific code moved from
pause_listener() to tcp_pause_listener().
I've been facing multiple configurations which involved track-sc* rules
in tcp-request content without the "if ..." to force it to wait for the
contents, resulting in random behaviour with contents sometimes retrieved
and sometimes not.
Reading the doc doesn't make it clear either that the tracking will be
performed only if data are already there and that waiting on an ACL is
the only way to avoid this.
Since this behaviour is not natural and we now have the ability to fix
it, this patch ensures that if input data are still moving, instead of
silently dropping them, we naturally wait for them to stabilize up to
the inspect-delay. This way it's not needed anymore to implement an
ACL-based condition to force to wait for data, eventhough the behaviour
is not changed for when an ACL is present.
The most obvious usage will be when track-sc is followed by any HTTP
sample expression, there's no need anymore for adding "if HTTP".
It's probably worth backporting this to 1.5 to avoid further configuration
issues. Note that it requires previous patch.
stktable_fetch_key() does not indicate whether it returns NULL because
the input sample was not found or because it's unstable. It causes trouble
with track-sc* rules. Just like with sample_fetch_string(), we want it to
be able to give more information to the caller about what it found. Thus,
now we use the pointer to a sample passed by the caller, and fill it with
the information we have about the sample. That way, even if we return NULL,
the caller has the ability to check whether a sample was found and if it is
still changing or not.
This new directive captures the specified fetch expression, converts
it to text and puts it into the next capture slot. The capture slots
are shared with header captures so that it is possible to dump all
captures at once or selectively in logs and header processing.
The purpose is to permit logs to contain whatever payload is found in
a request, for example bytes at a fixed location or the SNI of forwarded
SSL traffic.
We used to have is_addr() in place to validate sometimes the existence
of an address, sometimes a valid IPv4 or IPv6 address. Replace them
carefully so that is_inet_addr() is used wherever we can only use an
IPv4/IPv6 address.
Lets set IP_FREEBIND on IPv6 sockets as well, this works since Linux 3.3
and doesn't require CAP_NET_ADMIN privileges (IPV6_TRANSPARENT does).
This allows unprivileged users to bind to non-local IPv6 addresses, which
can be useful when setting up the listening sockets or when connecting
to backend servers with a specific, non-local source IPv6 address (at that
point we usually dropped root privileges already).
Till now, we had one flag per stick counter to indicate if it was
tracked in a backend or in a frontend. We just had to add another
flag per stick-counter to indicate if it relies on contents or just
connection. These flags are quite painful to maintain and tend to
easily conflict with other flags if their number is changed.
The correct solution consists in moving the flags to the stkctr struct
itself, but currently this struct is made of 2 pointers, so adding a
new entry there to store only two bits will cause at least 16 more bytes
to be eaten per counter due to alignment issues, and we definitely don't
want to waste tens to hundreds of bytes per session just for things that
most users don't use.
Since we only need to store two bits per counter, an intermediate
solution consists in replacing the entry pointer with a composite
value made of the original entry pointer and the two flags in the
2 unused lower bits. If later a need for other flags arises, we'll
have to store them in the struct.
A few inline functions have been added to abstract the retrieval
and assignment of the pointers and flags, resulting in very few
changes. That way there is no more dependence on the number of
stick-counters and their position in the session flags.
One year ago, commit 5d5b5d8 ("MEDIUM: proto_tcp: add support for tracking
L7 information") brought support for tracking L7 information in tcp-request
content rules. Two years earlier, commit 0a4838c ("[MEDIUM] session-counters:
correctly unbind the counters tracked by the backend") used to flush the
backend counters after processing a request.
While that earliest patch was correct at the time, it became wrong after
the second patch was merged. The code does what it says, but the concept
is flawed. "TCP request content" rules are evaluated for each HTTP request
over a single connection. So if such a rule in the frontend decides to
track any L7 information or to track L4 information when an L7 condition
matches, then it is applied to all requests over the same connection even
if they don't match. This means that a rule such as :
tcp-request content track-sc0 src if { path /index.html }
will count one request for index.html, and another one for each of the
objects present on this page that are fetched over the same connection
which sent the initial matching request.
Worse, it is possible to make the code do stupid things by using multiple
counters:
tcp-request content track-sc0 src if { path /foo }
tcp-request content track-sc1 src if { path /bar }
Just sending two requests first, one with /foo, one with /bar, shows
twice the number of requests for all subsequent requests. Just because
both of them persist after the end of the request.
So the decision to flush backend-tracked counters was not the correct
one. In practice, what is important is to flush countent-based rules
since they are the ones evaluated for each request.
Doing so requires new flags in the session however, to keep track of
which stick-counter was tracked by what ruleset. A later change might
make this easier to maintain over time.
This bug is 1.5-specific, no backport to stable is needed.
It's easier and safer to rely on conn_ctrl_ready() everywhere than to
check the flag itself. It will also simplify adding extra checks later
if needed. Some useless controls for !ctrl have been removed, as the
CTRL_READY flag itself guarantees ctrl is set.
The recv/send callbacks must check for readiness themselves instead of
having their callers do it. This will strengthen the test and will also
ensure we never refrain from calling a handshake handler because a
direction is being polled while the other one is ready.
We simply remove these functions and replace their calls with the
appropriate ones :
- if we're in the data phase, we can simply report wait on the FD
- if we're in the socket phase, we may also have to signal the
desire to read/write on the socket because it might not be
active yet.
This commit heavily changes the polling system in order to definitely
fix the frequent breakage of SSL which needs to remember the last
EAGAIN before deciding whether to poll or not. Now we have a state per
direction for each FD, as opposed to a previous and current state
previously. An FD can have up to 8 different states for each direction,
each of which being the result of a 3-bit combination. These 3 bits
indicate a wish to access the FD, the readiness of the FD and the
subscription of the FD to the polling system.
This means that it will now be possible to remember the state of a
file descriptor across disable/enable sequences that generally happen
during forwarding, where enabling reading on a previously disabled FD
would result in forgetting the EAGAIN flag it met last time.
Several new state manipulation functions have been introduced or
adapted :
- fd_want_{recv,send} : enable receiving/sending on the FD regardless
of its state (sets the ACTIVE flag) ;
- fd_stop_{recv,send} : stop receiving/sending on the FD regardless
of its state (clears the ACTIVE flag) ;
- fd_cant_{recv,send} : report a failure to receive/send on the FD
corresponding to EAGAIN (clears the READY flag) ;
- fd_may_{recv,send} : report the ability to receive/send on the FD
as reported by poll() (sets the READY flag) ;
Some functions are used to report the current FD status :
- fd_{recv,send}_active
- fd_{recv,send}_ready
- fd_{recv,send}_polled
Some functions were removed :
- fd_ev_clr(), fd_ev_set(), fd_ev_rem(), fd_ev_wai()
The POLLHUP/POLLERR flags are now reported as ready so that the I/O layers
knows it can try to access the file descriptor to get this information.
In order to simplify the conditions to add/remove cache entries, a new
function fd_alloc_or_release_cache_entry() was created to be used from
pollers while scanning for updates.
The following pollers have been updated :
ev_select() : done, built, tested on Linux 3.10
ev_poll() : done, built, tested on Linux 3.10
ev_epoll() : done, built, tested on Linux 3.10 & 3.13
ev_kqueue() : done, built, tested on OpenBSD 5.2
Now when a connection error happens, it is reported in the connection
so that upper layers know exactly what happened. This is particularly
useful with health checks and resources exhaustion.
When an incoming shutdown or error is detected, we know that we
can safely close without disabling lingering. Do it in tcp_drain()
so that we don't have to do it from each and every caller.
It was not possible to know if the drain() function had hit an
EAGAIN, so now we change the API of this function to return :
< 0 if EAGAIN was met
= 0 if some data remain
> 0 if a shutdown was received
Right now we see many places doing their own setsockopt(SO_LINGER).
Better only do it just before the close() in fd_delete(). For this
we add a new flag on the file descriptor, indicating if it's safe or
not to linger. If not (eg: after a connect()), then the setsockopt()
call is automatically performed before a close().
The flag automatically turns to safe when receiving a read0.
