We normally taint the process when using experimental directives, but
a handful of places were missed so we don't always know that they are
in use. Let's fix these places (hint for future directives, just look
for places checking for "experimental_directives_allowed", and add
"mark_tainted(TAINTED_CONFIG_EXP_KW_DECLARED);").
Similarly to the automic SNI selection for regulat SSL traffic, the SNI of
health-checks HTTPS connection is now automatically set by default by using
the host header value. "check-sni-auto" and "no-check-sni-auto" server
settings were added to change this behavior.
Only implicit HTTPS health-checks can take advantage of this feature. In
this case, the host header value from the "option httpchk" directive is used
to extract the SNI. It is disabled if http-check rules are used. So, the SNI
must still be explicitly specified via a "http-check connect" rule.
This patch with should paritally fix the issue #3081.
For HTTPS outgoing connections, the SNI is now automatically set using the
Host header value if no other value is already set (via the "sni" server
keyword). It is now the default behavior. It could be disabled with the
"no-sni-auto" server keyword. And eventually "sni-auto" server keyword may
be used to reset any previous "no-sni-auto" setting. This option can be
inherited from "default-server" settings. Finally, if no connection name is
set via "pool-conn-name" setting, the selected value is used.
The automatic selection of the SNI is enabled by default for all outgoing
connections. But it is concretely used for HTTPS connections only. The
expression used is "req.hdr(host),host_only".
This patch should paritally fix the issue #3081. It only covers the server
part. Another patch will add the feature for HTTP health-checks.
It is not really an issue, but the "check-sni" value inerited from a default
server is not duplicated while the paramter value is duplicated during the
parsing. So here there is a small leak if several "check-sni" parameters are
used on the same server line. The previous value is never released. But to
fix this issue, the value inherited from the default server must also be
duplicated. At the end it is safer this way and consistant with the parsing
of the "sni" parameter.
It is harmless so there is no reason to backport this patch.
It possible to use both 'strict-sni' and 'default-crt' on the same bind
line, which does not make much sense.
This patch implements a check which will look for default certificates
in the sni_w tree when strict-sni is used. (Referenced by their empty
sni ""). default-crt sets the CKCH_INST_EXPL_DEFAULT flag in
ckch_inst->is_default, so its possible to differenciate explicits
default from implicit default.
Could be backported as far as 3.0.
This was discussed in ticket #3082.
This patch introduces a change of behavior in the configuration parsing.
Previously the "ssl-f-use" lines were only applied on "ssl" bind lines
that does not have any "crt" configured.
Since there is no warning and you could mix bind lines with and without
crt, this is really confusing.
This patch applies the "ssl-f-use" lines on every "ssl" bind lines.
This was discussed in ticket #3082.
Must be backported in 3.2.
Add a new "ktls" option to bind and server. Valid values are "on" and
"off".
It currently does nothing, but when kTLS will be implemented, it will
enable or disable kTLS for the corresponding sockets.
It is marked as experimental for now.
This "renegotiate" option can be set on SSL backends to allow secure
renegotiation. It is mostly useful with SSL libraries that disable
secure regotiation by default (such as AWS-LC).
The "no-renegotiate" one can be used the other way around, to disable
secure renegotation that could be allowed by default.
Those two options can be set via "ssl-default-server-options" as well.
Currently there is "no-tls-tickets" that is also supported in the
ssl-default-bind-options directive, but there's no way to re-enable
them on a specific "bind" line. This patch simply provides the option
to re-enable them. Note that the flag is inverted because tickets are
enabled by default and the no-tls-ticket option sets the flag to
disable them.
Several users already reported that it would be nice to support
strict-sni in ssl-default-bind-options. However, in order to support
it, we also need an option to disable it.
This patch moves the setting of the option from the strict_sni field
to a flag in the ssl_options field so that it can be inherited from
the default bind options, and adds a new "no-strict-sni" directive to
allow to disable it on a specific "bind" line.
The test file "del_ssl_crt-list.vtc" which already tests both options
was updated to make use of the default option and the no- variant to
confirm everything continues to work.
The 'ssl-f-use' implementation doesn't prevent to have multiple time the
'crt' keyword, which overwrite the previous value. Letting users think
that is it possible to use multiple certificates on the same line, which
is not the case.
This patch emits an alert when setting the 'crt' keyword multiple times
on the same ssl-f-use line.
Should fix issue #2966.
No backport needed.
Commit c7f29afc ("MEDIUM: ssl: replace "crt" lines by "ssl-f-use"
lines") forgot to remove an the allocation of the crt field which was
done with the first argument.
Since ssl-f-use takes keywords, this would put the first keyword in
"crt" instead of the certificate name.
When declaring a certificate via the crt-store section, this certificate
can then be used 2 ways in a crt-list:
- only by using its name, without any crt-store options
- or by using the exact set of crt-list option that was defined in the
crt-store
Since ssl-f-use is generating a crt-list, this is suppose to behave the
same. To achieve this, ckch_conf_parse() will parse the keywords related
to the ckch_conf on the ssl-f-use line and use ckch_conf_cmp() to
compare it to the previous declaration from the crt-store. This
comparaison is only done when any ckch_conf keyword are present.
However, ckch_conf_parse() was done for the crt-list, and the crt-list
does not use the "crt" parameter to declare the name of the certificate,
since it's the first element of the line. So when used with ssl-f-use,
ckch_conf_parse() will always see a "crt" keyword which is a ckch_conf
one, and consider that it will always need to have the exact same set of
paremeters when using the same crt in a crt-store and an ssl-f-use line.
So a simple configuration like this:
crt-store web
load crt "foo.com.crt" key "foo.com.key" alias "foo"
frontend mysite
bind :443 ssl
ssl-f-use crt "@web/foo" ssl-min-ver TLSv1.2
Would lead to an error like this:
config : '@web/foo' in crt-list '(null)' line 0, is already defined with incompatible parameters:
- different parameter 'key' : previously 'foo.com.key' vs '(null)'
In order to fix the issue, this patch parses the "crt" parameter itself
for ssl-f-use instead of using ckch_conf_parse(), so the keyword would
never be considered as a ckch_conf keyword to compare.
This patch also take care of setting the CKCH_CONF_SET_CRTLIST flag only
if a ckch_conf keyword was found. This flag is used by ckch_conf_cmp()
to know if it has to compare or not.
No backport needed.
Fill cfg_crt_node with a filename and linenum so the post_section
callback can use it to emit errors.
This way the errors are emitted with the right filename and linenum
where ssl-f-use is used instead of (null):0
The new "crt" lines in frontend and listen sections are confusing:
- a filename is mandatory but we could need a syntax without the
filename in the future, if the filename is generated for example
- there is no clue about the fact that its only used on the frontend
side when reading the line
A new "ssl-f-use" line replaces the "crt" line, but a "crt" keyword
can be used on this line. "f" indicates that this is the frontend
configuration, a "ssl-b-use" keyword could be used in the future.
The "crt" lines only appeared in 3.2-dev so this won't change anything
for people using configurations from previous major versions.
This patch implements the "crt" keywords in frontend, declaring an
implicit crt-list named after the frontend.
The patch is split in two steps:
The first step is the crt keyword parser, which parses crt lines and
fill a "cfg_crt_node" struct containing a ssl_bind_conf and a
ckch_conf which are put in a list to be used later.
After parsing the frontend section, as a 2nd step, a
post_section_parser is called, it will create a crt-list named after
the frontend and will fill it with certificates from the list of
cfg_crt_node. Once created this crt-list will be loaded in every "ssl"
bind lines that didn't declare any crt or crt-list.
Example:
listen https
bind :443 ssl
crt foobar.pem
crt test1.net.crt key test1.net.key
Implements part of #2854
Some libraries are ignoring SSL_CTX_set_tmp_dh_callback(), but disabling
the 'ssl.default-dh-param' keyword when the function is not supported would
result in an error instead of silently continuing. This patch emits a
warning when the keyword is not supported instead of a loading failure.
Remove the "ocsp-update" keyword handling from the crt-list.
The code was made as an exception everywhere so we could activate the
ocsp-update for an individual certificate.
The feature will still exists but will be parsed as a "crt-store"
keyword which will still be usable in a "crt-list". This will appear in
future commits.
This commit also disable the reg-tests for now.
The crt-store load line now allows to put an alias. This alias is used
as the key in the ckch_tree instead of the certificate. This way an
alias can be referenced in the configuration with the '@/' prefix.
This can only be define with a crt-store.
The global 'key-base' keyword allows to read the 'key' parameter of a
crt-store load line using a path prefix.
This is the equivalent of the 'crt-base' keyword but for 'key'.
It only applies on crt-store.
This option can be used to set a default ocsp-update mode for all
certificates of a given conf file. It allows to activate ocsp-update on
certificates without the need to create separate crt-lists. It can still
be superseded by the crt-list 'ocsp-update' option. It takes either "on"
or "off" as value and defaults to "off".
Since setting this new parameter to "on" would mean that we try to
enable ocsp-update on any certificate, and also certificates that don't
have an OCSP URI, the checks performed in ssl_sock_load_ocsp were
softened. We don't systematically raise an error when trying to enable
ocsp-update on a certificate that does not have an OCSP URI, be it via
the global option or the crt-list one. We will still raise an error when
a user tries to load a certificate that does have an OCSP URI but a
missing issuer certificate (if ocsp-update is enabled).
The new "ssl-security-level" option allows one to change the OpenSSL
security level without having to change the openssl.cnf global file of
your distribution. This directives applies on every SSL_CTX context.
People sometimes change their security level directly in the ciphers
directive, however there are some cases when the security level change
is not applied in the right order (for example when applying a DH
param).
Before this patch, it was to possible to trick by using a specific
openssl.cnf file and start haproxy this way:
OPENSSL_CONF=./openssl.cnf ./haproxy -f bug-2468.cfg
Values for the security level can be found there:
https://www.openssl.org/docs/man1.1.1/man3/SSL_CTX_set_security_level.html
This was discussed in github issue #2468.
The configuration parser still adds the 'ca-base' directory when loading
the @system-ca, preventing it to be loaded correctly.
This patch fixes the problem by not adding the ca-base when a file
starts by '@'.
Fix issue #2313.
Must be backported as far as 2.6.
This patch implements the 'curves' keyword on server lines as well as
the 'ssl-default-server-curves' keyword in the global section.
It also add the keyword on the server line in the ssl_curves reg-test.
These keywords allow the configuration of the curves list for a server.
When built with USE_QUIC_OPENSSL_COMPAT, a warning is emitted when using
allow-0rtt. However this warning is emitted for every allow-0rtt
keywords on the bind line which is confusing, it must only be done in
case the bind is a quic one. Also this does not handle the case where
the allow-0rtt keyword is in the crt-list.
This patch moves the warning to ssl_quic_initial_ctx() in order to emit
the warning in every useful cases.
QUIC 0-RTT is not supported when haproxy is linked against an TLS stack with
limited QUIC support (OpenSSL).
Modify the "allow-0rtt" option callback to make it emit a warning if set on
a QUIC listener "bind" line.
This patch introduces the "client-sigalgs" keyword for the server line,
which allows to configure the list of server signature algorithms
negociated during the handshake. Also available as
"ssl-default-server-client-sigalgs" in the global section.
This patch introduces the "sigalgs" keyword for the server line, which
allows to configure the list of server signature algorithms negociated
during the handshake. Also available as "ssl-default-server-sigalgs" in
the global section.
This commit introduces the keyword "client-sigalgs" for the bind line,
which does the same as "sigalgs" but for the client authentication.
"ssl-default-bind-client-sigalgs" allows to set the default parameter
for all the bind lines.
This patch should fix issue #2081.
This patch introduces the "sigalgs" keyword for the bind line, which
allows to configure the list of server signature algorithms negociated
during the handshake. Also available as "ssl-default-bind-sigalgs" in
the default section.
This patch was originally written by Bruno Henc.
It's possible to replace a previously set ALPN but not to disable ALPN
if it was previously set. The new "no-alpn" setting allows to disable
a previously set ALPN setting by preparing an empty one that will be
replaced and freed when the config is validated.
The minimum and maximum delays between two automatic updates of a given
OCSP response can now be set via global options. It allows to limit the
update rate of OCSP responses for configurations that use many frontend
certificates with the ocsp-update option set if the updates are deemed
too costly.
The ssl_bind_kw structure is exclusively used for crt-list keyword, it
must be named otherwise to remove the confusion.
The structure was renamed ssl_crtlist_kws.
Upon out of memory condition at boot, we could possibly crash when
parsing the "npn" bind line keyword since it's used unchecked. There's
no real need to backport this though it will not hurt.
This patch effectively enables the ocsp auto update mechanism. If a
least one ocsp-update option is enabled in a crt-list, then the ocsp
auto update task is created. It will look into the dedicated ocsp update
tree for the next update to be updated, use the http_client to send the
ocsp request to the proper responder, validate the received ocsp
response and update the ocsp response tree before finally reinserting
the entry in the ocsp update tree (with a next update time set to
now+1H).
The main task will then sleep until another entry needs to be updated.
The task gets scheduled after config check in order to avoid trying to
update ocsp responses while configuration is still being parsed (and
certificates and actual ocsp responses are loaded).
This option will define how the ocsp update mechanism behaves. The
option can either be set to 'on' or 'off' and can only be specified in a
crt-list entry so that we ensure that it concerns a single certificate.
The 'off' mode is the default one and corresponds to the old behavior
(no automatic update).
When the option is set to 'on', we will try to get an ocsp response
whenever an ocsp uri can be found in the frontend's certificate. The
only limitation of this mode is that the certificate's issuer will have
to be known in order for the OCSP certid to be built.
This patch only adds the parsing of the option. The full functionality
will come in a later commit.
The ca-ignore-err and crt-ignore-err directives are now able to use the
openssl X509_V_ERR constant names instead of the numerical values.
This allow a configuration to survive an OpenSSL upgrade, because the
numerical ID can change between versions. For example
X509_V_ERR_INVALID_CA was 24 in OpenSSL 1 and is 79 in OpenSSL 3.
The list of errors must be updated when a new major OpenSSL version is
released.
The CRT and CA verify error codes were stored in 6 bits each in the
xprt_st field of the ssl_sock_ctx meaning that only error code up to 63
could be stored. Likewise, the ca-ignore-err and crt-ignore-err options
relied on two unsigned long longs that were used as bitfields for all
the ignored error codes. On the latest OpenSSL1.1.1 and with OpenSSLv3
and newer, verify errors have exceeded this value so these two storages
must be increased. The error codes will now be stored on 7 bits each and
the ignore-err bitfields are replaced by a big enough array and
dedicated bit get and set functions.
It can be backported on all stable branches.
[wla: let it be tested a little while before backport]
Signed-off-by: William Lallemand <wlallemand@haproxy.org>
We used to preset XPRT_SSL on bind_conf->xprt when parsing the "ssl"
keyword, which required to be careful about what QUIC could have set
before, and which makes it impossible to consider the whole line to
set all options.
Now that we have the BC_O_USE_SSL option on the bind_conf, it becomes
easier to set XPRT_SSL only once the bind_conf's args are parsed.
