I noticed it was possible to get truncated http/csv stats. Sometimes.
Usually the problem disappeared as fast as it appeared, but once it
happend that my http-stats page was truncated for about one hour.
It was quite weird as it happened independently for csv and http
output and it took me some time to track & fix this bug.
Both buffer_write & buffer_write_chunk used to return 0 in two
situations: is case of success or where there was exactly 0 bytes
left. The first one is intentional but I believe the second one
is not as it was not possible to distinguish between successful
write and unsuccessful one, which means that if the buffer was 100%
filled, it was never flushed and it was not possible to write
more data.
This patch fixes this problem.
Due to the way the stats socket work, it was not possible to
maintain the information related to the command entered, so
after filling a whole buffer, the request was lost and it was
considered that there was nothing to write anymore.
The major reason was that some flags were passed directly
during the first call to stats_dump_raw() instead of being
stored persistently in the session.
To definitely fix this problem, flags were added to the stats
member of the session structure.
A second problem appeared. When the stats were produced, a first
call to client_retnclose() was performed, then one or multiple
subsequent calls to buffer_write_chunks() were done. But once the
stats buffer was full and a reschedule operated, the buffer was
flushed, the write flag cleared from the buffer and nothing was
done to re-arm it.
For this reason, a check was added in the proto_uxst_stats()
function in order to re-call the client FSM when data were added
by stats_dump_raw(). Finally, the whole unix stats dump FSM was
rewritten to avoid all the magics it depended on. It is now
simpler and looks more like the HTTP one.
Commit 3168223a7b33a1d5aad1e11b8f2ad917645d7f27 broke option
"allbackups" in roundrobin mode due to an erroneous structure
member replacement in backend.c. The PR_O_USE_ALL_BK flag was
not tested in the right member anymore.
This bug uncoverred another one, by which all backup servers would
be used whatever the option's value, if all of them had been seen
as simultaneously failed at one moment.
This patch fixes the two stupid errors. Correctness has been tested
using the test-fwrr.cfg config example.
(cherry picked from commit f4cca45b5e6c6ed88a0062cf92ae57e01405ab12)
Matt Farnsworth reported a memory leak in str2sun() in case a too large
socket path is passed. The bug is very minor because it only happens
once during config parsing, but has to be fixed nevertheless. The patch
Matt provided could even be improved by completely removing the useless
strdup() in this function.
(cherry picked from commit caf720d3ff7758273278aecab26bb7624ec2f555)
Commit 98937b875798e10fac671d109355cde29d2a411a while fixing
one bug introduced another one. With "retries 4" and
"option redispatch" haproxy tries to connect 4 times to
one server server and 1 time to a second one. However
logs showed 5 connections to the first server (the
last one was counted twice) and 2 to the second.
This patch also fixes srv->retries and be->retries increments.
Now I get: 3 retries and 1 error in a first server (4 cum_sess)
and 1 error in a second server (1 cum_sess) with:
retries 4
option redispatch
and: 4 retries and 1 error (5 cum_sess) with:
retries 4
So, the number of connections effectively served by a server is:
srv->cum_sess - srv->failed_conns - srv->retries
(cherry picked from commit 626a19b66f769a87e7c995267ccedf14149e03b3)
We've been trying to use the latest release (1.3.14.2) of haproxy to do
sticky sessions. Cookie insertion is not an option for us, although we
would much rather use it, as we are trying to work around a problem where
cookies are unreliable. The appsession functionality only partially worked
(it wouldn't read the session id out of a query string) until we made the
following code change to the get_srv_from_appsession function in
proto_http.c.
(cherry picked from commit 6d0b1fac23517f16b3972b529ea41718b3643c9f)
An unknown keyword was always reported in section "listen" for any
section type (defaults, listen, frontend, backend, ...).
(cherry picked from commit 6daf34352f325699efa8f731e5525275523786b9)
Commit 8b3977ffe36190e45fb974bf813bfbd935ac99a1 removed "t->logs.bytes_in = 0;"
but instead it should change it into "t->logs.bytes_out = 0;" as since
583bc966064e248771e75c253dddec7351afd8a2 counters are incremented not set.
It should be incremented in session_process_counters while sending data to a
client:
bytes = s->rep->total - s->logs.bytes_out;
s->logs.bytes_out = s->rep->total;
However, if we increment (set) s->logs.bytes_out while processing
"logasap", statistics get wrong values added for headers: 0 or even
negative if haproxy adds some headers itself.
To test it, please enable logasap and download one empty file and look at
stats. Without my fix information available on that page are invalid, for
example:
# pxname,svname,qcur,qmax,scur,smax,slim,stot,bin,bout,dreq,dresp,ereq,econ,eresp,wretr,wredis,status,weight,act,bck,chkfail,chkdown,lastchg,downtime,qlimit,pid,iid,sid,throttle,lbtot,
www,b,0,0,0,1,,1,24,-92,,0,,0,0,0,,UP,1,1,0,0,0,3121,0,,1,2,1,,1,
www,BACKEND,0,0,0,1,0,1,24,-92,0,0,,0,0,0,0,UP,1,1,0,,0,3121,0,,1,2,0,,1,
Due to the way Linux delivers EPOLLIN and EPOLLHUP, a closed connection
received after some server data sometimes results in truncated responses
if the client disconnects before server starts to respond. The reason
is that the EPOLLHUP flag is processed as an indication of end of
transfer while some data may remain in the system's socket buffers.
This problem could only be triggered with sepoll, although nothing should
prevent it from happening with normal epoll. In fact, the work factoring
performed by sepoll increases the risk that this bug appears.
The fix consists in making FD_POLL_HUP and FD_POLL_ERR sticky and that
they are only checked if FD_POLL_IN is not set, meaning that we have
read all pending data.
That way, the problem is definitely fixed and sepoll still remains about
17% faster than epoll since it can take into account all information
returned by the kernel.
a copy-paste typo was present in the reconnection code responsible
for respatching. The client's FSM would not be re-evaluated if an
error occurred. It looks harmless but better fix it.
It was abnormal to see more connect errors than connect attempts.
This was caused by the fact that the server's connection count was
not incremented for failed connect() attempts.
Now the per-server connections are correctly incremented for each
connect() attempt. This includes the retries too. The number of
connections effectively served by a server will then be :
srv->cum_sess - srv->errors - srv->warnings
In order to offer DoS protection, it may be required to lower the maximum
accepted time to receive a complete HTTP request without affecting the client
timeout. This helps protecting against established connections on which
nothing is sent. The client timeout cannot offer a good protection against
this abuse because it is an inactivity timeout, which means that if the
attacker sends one character every now and then, the timeout will not
trigger. With the HTTP request timeout, no matter what speed the client
types, the request will be aborted if it does not complete in time.
This new parameter makes it possible to override the default
number of consecutive incoming connections which can be
accepted on a socket. By default it is not limited on single
process mode, and limited to 8 in multi-process mode.
Add the "backlog" parameter to frontends, to give hints to
the system about the approximate listen backlog desired size.
In order to protect against SYN flood attacks, one solution is
to increase the system's SYN backlog size. Depending on the
system, sometimes it is just tunable via a system parameter,
sometimes it is not adjustable at all, and sometimes the system
relies on hints given by the application at the time of the
listen() syscall. By default, HAProxy passes the frontend's
maxconn value to the listen() syscall. On systems which can
make use of this value, it can sometimes be useful to be able
to specify a different value, hence this backlog parameter.
It is sometimes required to know some informations such as the
process uptime when consulting statistics. This patch adds the
"show info" command to query those informations on the UNIX
socket.
The build process was getting annoying under some conditions,
especially on platforms which are used to set CFLAGS, as well
as those which set a lot of complex defines. The new Makefile
takes care of this situation by not mixing TARGET, CPU and user
values, and by making privileging the pre-setting of common
variables with the ability to override them.
Now CFLAGS and LDFLAGS are set by default and may be overridden
without the risk of breaking useful defines. Options are better
dealt with, and as a bonus, it was possible to merge the FreeBSD
and OpenBSD targets into the common GNU Makefile.
The report of build options by "haproxy -vv" has been slightly
adapted to the new mode. Options implied by architecture are not
reported, only user-specified options are. It is also possible to
add options which will not be reported in order not to mangle the
output when specifying dirty informations such as URLs...
The Makefile was copiously documented and it should be easier to
build for any target now. Backwards compatibility with older
build processes was kept, and warnings are emitted for deprecated
build options.
This patch adds a possibility to invert most of available options by
introducing the "no" keyword, available as an additional prefix.
If it is found arguments are shifted left and an additional flag (inv)
is set.
It allows to use all options from a current defaults section, except
the selected ones, for example:
-- cut here --
defaults
contimeout 4200
clitimeout 50000
srvtimeout 40000
option contstats
listen stats 1.2.3.4:80
no option contstats
-- cut here --
Currenly inversion works only with the "option" keyword.
The patch also moves last_checks calculation at the end of the readcfgfile()
function and changes "PR_O_FORCE_CLO | PR_O_HTTP_CLOSE" into "PR_O_FORCE_CLO"
in cfg_opts so it is possible to invert forceclose without breaking httpclose
(and vice versa) and to invert tcpsplice in one proxy but to keep a proper
last_checks value when tcpsplice is used in another proxy. Now, the code
checks for PR_O_FORCE_CLO everywhere it checks for PR_O_HTTP_CLOSE.
I also decided to depreciate "redisp" and "redispatch" keywords as it is IMHO
better to use "option redispatch" which can be inverted.
Some useful documentation were added and at the same time I sorted
(alfabetically) all valid options both in the code and the documentation.
The error check in return of start_proxies checked for exact ERR_RETRYABLE
but did not consider the return as a bit field. The function returned both
ERR_RETRYABLE and ERR_ALERT, hence the problem.
Solaris, as well as many other unixes doesn't know about sun_len
for UNIX domain sockets. It does not honnor the __SOCKADDR_COMMON
macro either. After looking at MacOS-X man (which is the same as
BSD man), OpenBSD man, and examples on the net, it appears that
those which support sun_len do not actually use it, or at least
ignore it as long as it's zero. Since all the sockaddr structures
are zeroed prior to being filled, it causes no problem not to set
sun_len, and this fixes build on other platforms.
Another problem on Solaris was that the "sun" name is already
defined as a macro returning a number, so it was necessary to
rename it.
The code in haproxy-1.3.13.1 only supports syslogging to an internet
address. The attached patch:
- Adds support for syslogging to a UNIX domain socket (e.g., /dev/log).
If the address field begins with '/' (absolute file path), then
AF_UNIX is used to construct the socket. Otherwise, AF_INET is used.
- Achieves clean single-source build on both Mac OS X and Linux
(sockaddr_in.sin_len and sockaddr_un.sun_len field aren't always present).
For handling sendto() failures in send_log(), it appears that the existing
code is fine (no need to close/recreate socket) for both UDP and UNIX-domain
syslog server. So I left things alone (did not close/recreate socket).
Closing/recreating socket after each failure would also work, but would lead
to increased amount of unnecessary socket creation/destruction if syslog is
temporarily unavailable for some reason (especially for verbose loggers).
Please consider this patch for inclusion into the upstream haproxy codebase.
One user reported that an indicator was missing in the statistics:
the number of times each server was selected by load balancing. It
is in fact the total number of sessions assigned to a server by the
load balancing algorithm. It should directly reflect the weight for
"fair" algorithms such as round-robin, since it will not account for
persistant connections.
It should help a lot tuning each server's weight depending on the
load it receives.
Because of a divide, it was possible to have a null weight during
a slowstart, which is pretty annoying, especially with a single
server and a long slowstart.
Also, fix the way we report the values in the stats page to avoid
confusion.
A new "timeout" keyword replaces old "{con|cli|srv}timeout", and
provides the ability to independantly set the following timeouts :
- client
- tarpit
- queue
- connect
- server
- appsession
Additionally, the "clitimeout", "contimeout" and "srvtimeout" values
are supported but deprecated. No warning is emitted yet when they are
used since the option is very new.
Other timeouts should follow soon now.
Now the connect timeout, tarpit timeout and queue timeout are
distinct. In order to retain compatibility with older versions,
if either queue or tarpit is left unset both in the proxy and
in the default proxy, then it is inherited from the connect
timeout as before.
It is not always handy to manipulate large values exprimed
in milliseconds for timeouts. Also, some values are entered
in seconds (such as the stats refresh interval). This patch
adds support for time units. It knows about 'us', 'ms', 's',
'm', 'h', and 'd'. It automatically converts each value into
the caller's expected unit. Unit-less values are still passed
unchanged.
The unit must be passed as a suffix to the number. For instance:
clitimeout 15m
If any character is not understood, an error is returned.
This new function accepts inputs in various default units, from
the microsecond to the day. It detects suffixes after numbers
and performs the appropriate conversions between the user's unit
and the program's unit, considering a unit-less number in the
default unit.
In order to avoid issues in the future, we want to restrict
the set of allowed characters for identifiers. Starting from
now, only A-Z, a-z, 0-9, '-', '_', '.' and ':' will be allowed
for a proxy, a server or an ACL name.
A test file has been added to check the restriction.
Sometimes it is useful to find out how a given binary version was
built. The build compiler and options are now provided for this,
and it's possible to get them with the -vv option.
Now we can compute the max place depending on the number of servers,
maximum weight and weight scale. The formula has been stored as a
comment so that it's easy to choose between smooth weight ramp up
and high number of servers. The default scale has been set to 16,
which permits 4000 servers with a granularity of 6% in the worst
case (weight=1).
Due to the fact that htons is defined as a macro, it's dangerous
to call it with auto-incremented arguments such as htons(f(++x)) :
src/standard.c: In function 'url2sa':
src/standard.c:291: warning: operation on 'curr' may be undefined
The solution is simply to store the intermediate result an pass it
to htons() at once.
Under certain circumstances, it is very useful to be able to fail some
monitor requests. One specific case is when the number of servers in
the backend falls below a certain level. The new "monitor fail" construct
followed by either "if"/"unless" <condition> makes it possible to specify
ACL-based conditions which will make the monitor return 503 instead of
200. Any number of conditions can be passed. Another use may be to limit
the requests to local networks only.
The new "nbsrv" ACL verb matches the number of active servers in a backend.
By default, it applies to the backend where it is declared, but optionally
it can receive the name of another backend as an argument in parenthesis.
It counts the number of enabled active servers first, then the number of
enabled backup servers.
AIX does not know about MSG_DONTWAIT. Fortunately, nearly all sockets
are already set to O_NONBLOCK, so it's not even required to change the
code. It was only necessary to add this fcntl to the log socket which
lacked it. The MSG_DONTWAIT value has been defined to zero when unset
in order to make the code cleaner and more portable.
Also, on AIX, "hz" is defined, which causes a problem with one function
parameter in time.c. It's enough to rename the parameter there. Last,
fix a missing #include <string.h> in proxy.c.
A new "throttle" column has been added to HTML and RAW stats to indicate
in percent, the level of throttling due to server warmup. The column is
empty at 100%.
The new 'slowstart' parameter for a server accepts a value in
milliseconds which indicates after how long a server which has
just come back up will run at full speed. The speed grows
linearly from 0 to 100% during this time. The limitation applies
to two parameters :
- maxconn: the number of connections accepted by the server
will grow from 1 to 100% of the usual dynamic limit defined
by (minconn,maxconn,fullconn).
- weight: when the backend uses a dynamic weighted algorithm,
the weight grows linearly from 1 to 100%. In this case, the
weight is updated at every health-check. For this reason, it
is important that the 'inter' parameter is smaller than the
'slowstart', in order to maximize the number of steps.
The slowstart never applies when haproxy starts, otherwise it
would cause trouble to running servers. It only applies when
a server has been previously seen as failed.
It's important to be able to distinguish between servers which are UP
and those which are UP but disabled via a 404 response. For this reason,
the status entries report "NOLB" instead of "UP", and the HTML page uses
darker colors. As a complement, write "DOWN" in bold red on the backend
if it has no server left for load balancing.
It's not always obvious for the callers of set_server_status_{up,down}
whether the new state really is up or down. Some flags as well as the
effective weight have to be considered. Let's ensure that those functions
perform the necessary check themselves so that if the state transition
cannot be performed, at least everything is updated as required.
