Getting rid of this warning is cleaner solved using a 'fall through' comment,
because it clarifies intent to a human reader.
This patch adjust a few places that cause -Wimplicit-fallthrough to trigger:
- Fix typos in the comment.
- Remove redundant 'no break' that trips up gcc from comment.
- Move the comment out of the block when the 'case' is completely surrounded
by braces.
- Add comments where I could determine that the fall through was intentional.
Changes tested on
gcc (Debian 9.3.0-13) 9.3.0
Copyright (C) 2019 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
using
make -j4 all TARGET=linux-glibc USE_OPENSSL=1 USE_LUA=1 USE_ZLIB=1 USE_PCRE2=1 USE_PCRE2_JIT=1 USE_GETADDRINFO=1
This patch fixes all the leftovers from the include cleanup campaign. There
were not that many (~400 entries in ~150 files) but it was definitely worth
doing it as it revealed a few duplicates.
Most of the files dealing with error reports have to include log.h in order
to access ha_alert(), ha_warning() etc. But while these functions don't
depend on anything, log.h depends on a lot of stuff because it deals with
log-formats and samples. As a result it's impossible not to embark long
dependencies when using ha_warning() or qfprintf().
This patch moves these low-level functions to errors.h, which already
defines the error codes used at the same places. About half of the users
of log.h could be adjusted, sometimes revealing other issues such as
missing tools.h. Interestingly the total preprocessed size shrunk by
4%.
There's no point splitting the file in two since only cfgparse uses the
types defined there. A few call places were updated and cleaned up. All
of them were in C files which register keywords.
There is nothing left in common/ now so this directory must not be used
anymore.
This one was not easy because it was embarking many includes with it,
which other files would automatically find. At least global.h, arg.h
and tools.h were identified. 93 total locations were identified, 8
additional includes had to be added.
In the rare files where it was possible to finalize the sorting of
includes by adjusting only one or two extra lines, it was done. But
all files would need to be rechecked and cleaned up now.
It was the last set of files in types/ and proto/ and these directories
must not be reused anymore.
extern struct dict server_name_dict was moved from the type file to the
main file. A handful of inlined functions were moved at the bottom of
the file. Call places were updated to use server-t.h when relevant, or
to simply drop the entry when not needed.
This one is particularly difficult to split because it provides all the
functions used to manipulate a proxy state and to retrieve names or IDs
for error reporting, and as such, it was included in 73 files (down to
68 after cleanup). It would deserve a small cleanup though the cut points
are not obvious at the moment given the number of structs involved in
the struct proxy itself.
It was moved without any change, however many callers didn't need it at
all. This was a consequence of the split of proto_http.c into several
parts that resulted in many locations to still reference it.
Almost no change except moving the cli_kw struct definition after the
defines. Almost all users had both types&proto included, which is not
surprizing since this code is old and it used to be the norm a decade
ago. These places were cleaned.
Just some minor reordering, and the usual cleanup of call places for
those which didn't need it. We don't include the whole tools.h into
stats-t anymore but just tools-t.h.
The type file was slightly tidied. The cli-specific APPCTX_CLI_ST1_* flag
definitions were moved to cli.h. The type file was adjusted to include
buf-t.h and not the huge buf.h. A few call places were fixed because they
did not need this include.
The type file is becoming a mess, half of it is for the proxy protocol,
another good part describes conn_streams and mux ops, it would deserve
being split again. At least it was reordered so that elements are easier
to find, with the PP-stuff left at the end. The MAX_SEND_FD macro was moved
to compat.h as it's said to be the value for Linux.
The TASK_IS_TASKLET() macro was moved to the proto file instead of the
type one. The proto part was a bit reordered to remove a number of ugly
forward declaration of static inline functions. About a tens of C and H
files had their dependency dropped since they were not using anything
from task.h.
This one is particularly tricky to move because everyone uses it
and it depends on a lot of other types. For example it cannot include
arg-t.h and must absolutely only rely on forward declarations to avoid
dependency loops between vars -> sample_data -> arg. In order to address
this one, it would be nice to split the sample_data part out of sample.h.
There's no type file, it only contains fetch_rdp_cookie_name() and
val_payload_lv() which probably ought to move somewhere else instead
of staying there.
It was moved as-is, except for extern declaration of pattern_reference.
A few C files used to include it but didn't need it anymore after having
been split apart so this was cleaned.
A few includes had to be added, namely list-t.h in the type file and
types/proxy.h in the proto file. actions.h was including http-htx.h
but didn't need it so it was dropped.
And also rename standard.c to tools.c. The original split between
tools.h and standard.h dates from version 1.3-dev and was mostly an
accident. This patch moves the files back to what they were expected
to be, and takes care of not changing anything else. However this
time tools.h was split between functions and types, because it contains
a small number of commonly used macros and structures (e.g. name_desc)
which in turn cause the massive list of includes of tools.h to conflict
with the callers.
They remain the ugliest files of the whole project and definitely need
to be cleaned and split apart. A few types are defined there only for
functions provided there, and some parts are even OS-specific and should
move somewhere else, such as the symbol resolution code.
The file was moved as-is. There was a wrong dependency on dynbuf.h
instead of buf.h which was addressed. There was no benefit to
splitting this between types and functions.
The type is the only element needed by applet.h and hlua.h, while hlua.c
needs the various functions. XREF_BUSY was placed into the types as well
since it's better to have the special values there.
Regex are essentially included for myregex_t but it turns out that
several of the C files didn't include it directly, relying on the
one included by their own .h. This has been cleanly addressed so
that only the type is included by H files which need it, and adding
the missing includes for the other ones.
Some of them were simply removed as unused (possibly some leftovers
from an older cleanup session), some were turned to haproxy/bitops.h
and a few had to be added (hlua.c and stick-table.h need standard.h
for parse_time_err; htx.h requires chunk.h but used to get it through
standard.h).
This splits the hathreads.h file into types+macros and functions. Given
that most users of this file used to include it only to get the definition
of THREAD_LOCAL and MAXTHREADS, the bare minimum was placed into thread-t.h
(i.e. types and macros).
All the thread management was left to haproxy/thread.h. It's worth noting
the drop of the trailing "s" in the name, to remove the permanent confusion
that arises between this one and the system implementation (no "s") and the
makefile's option (no "s").
For consistency, src/hathreads.c was also renamed thread.c.
A number of files were updated to only include thread-t which is the one
they really needed.
Some future improvements are possible like replacing empty inlined
functions with macros for the thread-less case, as building at -O0 disables
inlining and causes these ones to be emitted. But this really is cosmetic.
All files that were including one of the following include files have
been updated to only include haproxy/api.h or haproxy/api-t.h once instead:
- common/config.h
- common/compat.h
- common/compiler.h
- common/defaults.h
- common/initcall.h
- common/tools.h
The choice is simple: if the file only requires type definitions, it includes
api-t.h, otherwise it includes the full api.h.
In addition, in these files, explicit includes for inttypes.h and limits.h
were dropped since these are now covered by api.h and api-t.h.
No other change was performed, given that this patch is large and
affects 201 files. At least one (tools.h) was already freestanding and
didn't get the new one added.
This is where other imported components are located. All files which
used to directly include ebtree were touched to update their include
path so that "import/" is now prefixed before the ebtree-related files.
The ebtree.h file was slightly adjusted to read compiler.h from the
common/ subdirectory (this is the only change).
A build issue was encountered when eb32sctree.h is loaded before
eb32tree.h because only the former checks for the latter before
defining type u32. This was addressed by adding the reverse ifdef
in eb32tree.h.
No further cleanup was done yet in order to keep changes minimal.
The pattern references lock must be hold to perform set/add/del
operations. Unfortunately, it is not true for the lua functions manipulating acl
and map files.
This patch should fix the issue #664. It must be backported as far as 1.8.
Before executing a lua action, the analyse expiration timeout of the
corresponding channel must be reset. Otherwise, when it expires, for instance
because of a call to core.msleep(), if the action yields, an expired timeout
will be used for the stream's task, leading to a loop.
This patch should fix the issue #661. It must be backported in all versions
supporting the lua.
As discussed in GitHub issue #624 Lua scripts should not use
variables that are never going to be read, because the memory
for variable names is never going to be freed.
Add an optional `ifexist` parameter to the `set_var` function
that allows a Lua developer to set variables that are going to
be ignored if the variable name was not used elsewhere before.
Usually this mean that there is no `var()` sample fetch for the
variable in question within the configuration.
There is no good reason to register a variable name, just to unset
that value that could not even be set without the variable existing.
This change should be safe, may be backported if desired.
Remove the list of private connections from server, it has been largely
unused, we only inserted connections in it, but we would never actually
use it.
The wake_time of a lua context is now always set to TICK_ETERNITY when the
context is initialized and when everytime the execution of the lua stack is
started. It is mandatory to not set arbitrary wake_time when an action yields.
No backport needed.
This flag was used in some internal functions to be sure the current stream is
able to handle HTTP content. It was introduced when the legacy HTTP code was
still there. Now, It is possible to rely on stream's flags to be sure we have an
HTX stream.
So the flag HLUA_TXN_HTTP_RDY can be removed. Everywhere it was tested, it is
replaced by a call to the IS_HTX_STRM() macro.
This patch is mandatory to allow the support of the filters written in lua.
