This code has been used successfully a few times in the past to detect
that a pool was used after being freed. Its main goal is to allocate a
full page for each object so that they are always released individually
and unmapped from memory. This way if any part of the code reference the
object after is was freed and before it is reallocated, a segv occurs at
the exact offending location. It does a few extra things such as writing
to the memory area before freeing to detect double-frees and free of
read-only areas, and placing the data at the end of the page instead of
the beginning so that out of bounds accesses are easier to spot. The
amount of memory used with this is huge (about 10 times the regular
usage) but it can be useful sometimes.
The current H2 to H1 protocol conversion presents some issues which will
require to perform some processing on certain headers before writing them
so it's not possible to convert HPACK to H1 on the fly.
This commit modifies the headers decoding so that it now works in two
phases : hpack_decode_headers() only decodes the HPACK stream in the
HEADERS frame and puts the result into a list. Headers which require
storage (huffman-compressed or from the dynamic table) are stored in
a chunk allocated by the H2 demuxer. Then once the headers are properly
decoded into this list, h2_make_h1_request() is called with this list
to produce the HTTP/1.1 request into the destination buffer. The list
necessarily enforces a limit. Here we use 2*MAX_HTTP_HDR, which means
that we can have as many individual cookies as we have regular headers
if a client decides to break their cookies into multiple values. This
seams reasonable and will allow the H1 parser to decide whether it's
too much or not.
Thus the output stream is not produced on the fly anymore and this will
permit to deal with certain corner cases like reparing the Cookie header
(which for now is not done).
In order to limit header duplication and parsing, the known pseudo headers
continue to be passed by their index : the name element in the list then
has a NULL pointer and the value is the pseudo header's index. Given that
these ones represent about half of the incoming requests and need to be
found quickly, it maintains an acceptable level of performance.
The code was significantly reduced by doing this because the orignal code
had to deal with HPACK and H1 combinations (eg: index vs not indexed, etc)
and now the HPACK decoding is totally focused on the decompression, and
the H1 encoding doesn't have to deal with the issue of wrapping input for
example.
One bug was addressed here (though it couldn't happen at the moment). The
H2 demuxer used to detect a failure to write the request into the H1 buffer
and would then detect if the output buffer wraps, realign it and try again.
The problem by doing so was that the HPACK context was already modified and
not rewindable. Thus the size check is now performed first and a failure is
reported if it doesn't fit.
The current H2 to H1 protocol conversion presents some issues which will
require to perform some processing on certain headers before writing them
so it's not possible to convert HPACK to H1 on the fly.
Here we introduce a function which performs half of what hpack_decode_header()
used to do, which is to take a list of headers on input and emit the
corresponding request in HTTP/1.1 format. The code is the same and functions
were renamed to be prefixed with "h2" instead of "hpack", though it ends
up being simpler as the various HPACK-specific cases could be fused into
a single one (ie: add header).
Moving this part here makes a lot of sense as now this code is specific to
what is documented in HTTP/2 RFC 7540 and will be able to deal with special
cases related to H2 to H1 conversion enumerated in section 8.1.
Various error codes which were previously assigned to HPACK were never
used (aside being negative) and were all replaced by -1 with a comment
indicating what error was detected. The code could be further factored
thanks to this but this commit focuses on compatibility first.
This code is not yet used but builds fine.
While gcc only emits warnings about unused static functions, Clang also
emits such a warning when the functions are inlined. This is a bit
annoying at certain places where functions are provided to manipulate
multiple data types and are not yet used. Let's have a type modifier
"__maybe_unused" which sets the "unused" attribute like the Linux kernel
does. It's elegant as it allows the code author to indicate that it knows
that this element might be unused. It works on variables as well, which
is convenient to remove ifdefs around local variables in certain functions,
but doesn't work on labels.
Now we can show in dotted red the node being removed or surrounded in red
a node having been inserted, and add a description on the graph related to
the operation in progress for example.
b_alloc_margin is, strickly speeking, thread-safe. It will not crash
HAproxy. But its contract is not respected anymore in a multithreaded
environment. In this function, we need to be sure to have <margin> buffers
available in the pool after the allocation. So to have this guarantee, we must
lock the memory pool during all the operation. This also means, we must call
internal and lockless memory functions (prefixed with '__').
For the record, this patch fixes a pernicious bug happens after a soft reload
where some streams can be blocked infinitly, waiting for a buffer in the
buffer_wq list. This happens because, during a soft reload, pool_gc2 is called,
making some calls to b_alloc_fast fail.
This is specific to threads, no backport is needed.
This macro should be used to declare variables or struct members depending on
the USE_THREAD compile option. It avoids the encapsulation of such declarations
between #ifdef/#endif. It is used to declare all lock variables.
This small inline function causes some pain to the compiler when used
inside other functions due to its use of the unlikely() hint for non-digits.
It causes the letters to be processed far away in the calling function and
makes the code less efficient. Removing these unlikely() hints has increased
the chunk size parsing by around 5%.
The spin locks used to rely on W locks, which involve a loop waiting
for readers to leave, and this doesn't happen here. It's more efficient
to use S locks instead, which are also mutually exclusive and do not
have this loop. This saves one test per spinlock and a few tens of
bytes allowing certain functions to be inlined.
This function incorrectly dealt with the case where data doesn't
wrap but lies at the end of the buffer, resulting in Lukas' reported
data corruption with HTTP/2. No backport is needed, it was introduced
for HTTP/2 in 1.8-dev.
For now it only supports literals and a bit of static header table
references for the 9 most common header field names (date, server,
content-type, content-length, last-modified, accept-ranges, etag,
cache-control, location).
A previous incarnation of this commit used to strip the forbidden H2
header names (connection, proxy-connection, upgrade, transfer-encoding,
keep-alive) but this is no longer the case as this filtering is irrelevant
to HPACK encoding and is specific to H2, so this will have to be done by
the caller.
It's quite not optimal but works fine enough to prepare some valid and
partially compressed responses during development.
The decoder is now fully functional. It makes use of the dynamic header
table. Dynamic header table size updates are currently ignored, as our
initially advertised value is the highest we support. Strictly speaking,
the impact is that a client referencing a header field after such an
update wouldn't observe an error instead of the connection being dropped
if it was implemented.
Decoded header fields are copied into a target buffer in HTTP/1 format
using HTTP/1.1 as the version. The Host header field is automatically
appended if a ":authority" header field is present.
All decoded header fields can be displayed if the file is compiled with
DEBUG_HPACK.
This code deals with header insertion, retrieval and eviction, as well
as with dynamic header table defragmentation. It is functional for use
as a decoder and was heavily tested in this context. There's still some
room for optimization (eg: the defragmentation code currently does it
in place using a memcpy).
Also for now the dynamic header table is allocated using malloc() while
a pool needs to be created instead.
This code was mostly imported from https://github.com/wtarreau/http2-exp
with "hpack_" prepended in front of most names to avoid risks of conflicts.
Some small cleanups and renamings were applied during the import. This
version must be considered more recent.
Some HPACK error codes were placed here (HPACK_ERR_*), not exactly because
they're needed by the decoder but they'll be needed by all callers. Maybe
a different location should be found.
The code was borrowed from the HPACK experimental implementations
available here :
https://github.com/wtarreau/http2-exp
It contains the Huffman table as specified in RFC7541 Appendix B, and a
set of reverse tables used to decode a Huffman byte stream, and produced
by contrib/h2/gen-rht. The encoder is not finalized, it doesn't emit the
byte stream but this is not needed for now.
There was a flaw in the way the threads was created. the main one was just used
to create all the others and just wait to exit. Now, it is used to run a poll
loop. So we only create nbthread-1 threads.
This also fixes a bug about the compression filter when there is only 1 thread
(nbthread == 1 or no threads support). The bug was in the way thread-local
resources was initialized. per-thread init/deinit callbacks were never called
for the main process. So, with nthread set to 1, some buffers remained
uninitialized.
Because there is not migration mechanism yet, all runtime information about an
SPOE agent are thread-local and async exchanges with agents are disabled when we
have serveral threads. Howerver, pipelining is still available. So for now, the
thread part of the SPOE is pretty simple.
Note that the Lua processing is not really thread safe. It provides
heavy system which consists to add our own lock function in the Lua
code and recompile the library. This system will probably not accepted
by maintainers of various distribs.
Our main excution point of the Lua is the function lua_resume(). A
quick looking on the Lua sources displays a lua_lock() a the start
of function and a lua_unlock() at the end of the function. So I
conclude that the Lua thread safe mode just perform a mutex around
all execution. So I prefer to do this in the HAProxy code, it will be
easier for distro maintainers.
Note that the HAProxy lua functions rounded by the macro SET_SAFE_LJMP
and RESET_SAFE_LJMP manipulates the Lua stack, so it will be careful
to set mutex around these functions.
A RW lock has been added to the vars structure to protect each list of
variables. And a global RW lock is used to protect registered names.
When a varibable is fetched, we duplicate sample data because the variable could
be modified by another thread.
locks have been added in pat_ref and pattern_expr structures to protect all
accesses to an instance of on of them. Moreover, a global lock has been added to
protect the LRU cache used for pattern matching.
Patterns are now duplicated after a successfull matching, to avoid modification
by other threads when the result is used.
Finally, the function reloading a pattern list has been modified to be
thread-safe.
First, OpenSSL is now initialized to be thread-safe. This is done by setting 2
callbacks. The first one is ssl_locking_function. It handles the locks and
unlocks. The second one is ssl_id_function. It returns the current thread
id. During the init step, we create as much as R/W locks as needed, ie the
number returned by CRYPTO_num_locks function.
Next, The reusable SSL session in the server context is now thread-local.
Shctx is now also initialized if HAProxy is started with several threads.
And finally, a global lock has been added to protect the LRU cache used to store
generated certificates. The function ssl_sock_get_generated_cert is now
deprecated because the retrieved certificate can be removed by another threads
in same time. Instead, a new function has been added,
ssl_sock_assign_generated_cert. It must be used to search a certificate in the
cache and set it immediatly if found.
A lock is used to protect accesses to a peer structure.
A the lock is taken in the applet handler when the peer is identified
and released living the applet handler.
In the scheduling task for peers section, the lock is taken for every
listed peer and released at the end of the process task function.
The peer 'force shutdown' function was also re-worked.
A global lock has been added to protect accesses to the list of active
applets. A process mask has also been added on each applet. Like for FDs and
tasks, it is used to know which threads are allowed to process an
applet. Because applets are, most of time, linked to a session, it should be
sticky on the same thread. But in all cases, it is the responsibility of the
applet handler to lock what have to be protected in the applet context.
The stick table API was slightly reworked:
A global spin lock on stick table was added to perform lookup and
insert in a thread safe way. The handling of refcount on entries
is now handled directly by stick tables functions under protection
of this lock and was removed from the code of callers.
The "stktable_store" function is no more externalized and users should
now use "stktable_set_entry" in any case of insertion. This last one performs
a lookup followed by a store if not found. So the code using "stktable_store"
was re-worked.
Lookup, and set_entry functions automatically increase the refcount
of the returned/stored entry.
The function "sticktable_touch" was renamed "sticktable_touch_local"
and is now able to decrease the refcount if last arg is set to true. It
is allowing to release the entry without taking the lock twice.
A new function "sticktable_touch_remote" is now used to insert
entries coming from remote peers at the right place in the update tree.
The code of peer update was re-worked to use this new function.
This function is also able to decrease the refcount if wanted.
The function "stksess_kill" also handle a parameter to decrease
the refcount on the entry.
A read/write lock is added on each entry to protect the data content
updates of the entry.
A lock for LB parameters has been added inside the proxy structure and atomic
operations have been used to update server variables releated to lb.
The only significant change is about lb_map. Because the servers status are
updated in the sync-point, we can call recalc_server_map function synchronously
in map_set_server_status_up/down function.
This list is used to save changes on the servers state. So when serveral threads
are used, it must be locked. The changes are then applied in the sync-point. To
do so, servers_update_status has be moved in the sync-point. So this is useless
to lock it at this step because the sync-point is a protected area by iteself.
Now, each proxy contains a lock that must be used when necessary to protect
it. Moreover, all proxy's counters are now updated using atomic operations.
First, we use atomic operations to update jobs/totalconn/actconn variables,
listener's nbconn variable and listener's counters. Then we add a lock on
listeners to protect access to their information. And finally, listener queues
(global and per proxy) are also protected by a lock. Here, because access to
these queues are unusal, we use the same lock for all queues instead of a global
one for the global queue and a lock per proxy for others.
2 global locks have been added to protect, respectively, the run queue and the
wait queue. And a process mask has been added on each task. Like for FDs, this
mask is used to know which threads are allowed to process a task.
For many tasks, all threads are granted. And this must be your first intension
when you create a new task, else you have a good reason to make a task sticky on
some threads. This is then the responsibility to the process callback to lock
what have to be locked in the task context.
Nevertheless, all tasks linked to a session must be sticky on the thread
creating the session. It is important that I/O handlers processing session FDs
and these tasks run on the same thread to avoid conflicts.
Many changes have been made to do so. First, the fd_updt array, where all
pending FDs for polling are stored, is now a thread-local array. Then 3 locks
have been added to protect, respectively, the fdtab array, the fd_cache array
and poll information. In addition, a lock for each entry in the fdtab array has
been added to protect all accesses to a specific FD or its information.
For pollers, according to the poller, the way to manage the concurrency is
different. There is a poller loop on each thread. So the set of monitored FDs
may need to be protected. epoll and kqueue are thread-safe per-se, so there few
things to do to protect these pollers. This is not possible with select and
poll, so there is no sharing between the threads. The poller on each thread is
independant from others.
Finally, per-thread init/deinit functions are used for each pollers and for FD
part for manage thread-local ressources.
Now, you must be carefull when a FD is created during the HAProxy startup. All
update on the FD state must be made in the threads context and never before
their creation. This is mandatory because fd_updt array is thread-local and
initialized only for threads. Because there is no pollers for the main one, this
array remains uninitialized in this context. For this reason, listeners are now
enabled in run_thread_poll_loop function, just like the worker pipe.
