A lock for LB parameters has been added inside the proxy structure and atomic
operations have been used to update server variables releated to lb.
The only significant change is about lb_map. Because the servers status are
updated in the sync-point, we can call recalc_server_map function synchronously
in map_set_server_status_up/down function.
For now, we have a list of each type per thread. So there is no need to lock
them. This is the easiest solution for now, but not the best one because there
is no sharing between threads. An idle connection on a thread will not be able
be used by a stream on another thread. So it could be a good idea to rework this
patch later.
Now, each proxy contains a lock that must be used when necessary to protect
it. Moreover, all proxy's counters are now updated using atomic operations.
srv_queue([<backend>/]<server>) : integer
Returns an integer value corresponding to the number of connections currently
pending in the designated server's queue. If <backend> is omitted, then the
server is looked up in the current backend. It can sometimes be used together
with the "use-server" directive to force to use a known faster server when it
is not much loaded. See also the "srv_conn", "avg_queue" and "queue" sample
fetch methods.
The server state and weight was reworked to handle
"pending" values updated by checks/CLI/LUA/agent.
These values are commited to be propagated to the
LB stack.
In further dev related to multi-thread, the commit
will be handled into a sync point.
Pending values are named using the prefix 'next_'
Current values used by the LB stack are named 'cur_'
2 places were using an open-coded implementation of this function to count
available servers. Note that the avg_queue_size() fetch didn't check that
the proxy was in STOPPED state so it would possibly return a wrong server
count here but that wouldn't impact the returned value.
Signed-off-by: Nenad Merdanovic <nmerdan@haproxy.com>
This is like the nbsrv() sample fetch function except that it works as
a converter so it can count the number of available servers of a backend
name retrieved using a sample fetch or an environment variable.
Signed-off-by: Nenad Merdanovic <nmerdan@haproxy.com>
Keeping the address and the port in the same field causes a lot of problems,
specifically on the DNS part where we're forced to cheat on the family to be
able to keep the port. This causes some issues such as some families not being
resolvable anymore.
This patch first moves the service port to a new field "svc_port" so that the
port field is never used anymore in the "addr" field (struct sockaddr_storage).
All call places were adapted (there aren't that many).
when using "option prefer-last-server", we may not always stay on
the same backend if option balance told us otherwise.
For example, backend may change in the following cases:
balance hdr()
balance rdp-cookie
balance source
balance uri
balance url_param
[wt: backport this to 1.7 and 1.6]
According to nbsrv() documentation this fetcher should return "an
integer value corresponding to the number of usable servers".
In case backend is disabled none of servers is usable, so I believe
fetcher should return 0.
This patch should be backported to 1.7, 1.6, 1.5.
Now we exclusively use xprt_get(XPRT_RAW) instead of &raw_sock or
xprt_get(XPRT_SSL) for &ssl_sock. This removes a bunch of #ifdef and
include spread over a number of location including backend, cfgparse,
checks, cli, hlua, log, server and session.
These 2 patches add ability to fetch frontend/backend name in your
logic, so they can be used later to make routing decisions (fe_name) or
taking some actions based on backend which responded to request (be_name).
In our case we needed a fetcher to be able to extract information we
needed from frontend name.
When a backend doesn't use any known LB algorithm, backend_lb_algo_str()
returns NULL. It used to cause "nil" to be printed in the stats dump
since version 1.4 but causes 1.7 to try to parse this NULL to encode
it as a CSV string, causing a crash on "show stat" in this case.
The only situation where this can happen is when "transparent" or
"dispatch" are used in a proxy, in which case the LB algorithm is
BE_LB_ALGO_NONE. Thus now we explicitly report "none" when this
situation is detected, and we preventively report "unknown" if any
unknown algorithm is detected, which may happen if such an algo is
added in the future and the function is not updated.
This fix must be backported to 1.7 and may be backported as far as
1.4, though it has less impact there.
We'll have to use srv_set_admin_flag() to propagate some server flags
during the startup, and we don't want the resulting actions to cause
warnings, logs nor e-mail alerts to be generated since we're just applying
the config or a state file. So let's condition these notifications to the
fact that we're starting.
For active servers, this is the sum of the eweights of all active
servers before this one in the backend, and
[srv->cumulative_weight .. srv_cumulative_weight + srv_eweight) is a
space occupied by this server in the range [0 .. lbprm.tot_wact), and
likewise for backup servers with tot_wbck. This allows choosing a
server or a range of servers proportional to their weight, by simple
integer comparison.
Signed-off-by: Andrew Rodland <andrewr@vimeo.com>
The "sni" server directive does some bad stuff on many occasions because
it works on a sample of type string and limits len to size-1 by hand. The
problem is that size used to be zero on many occasions before the recent
changes to smp_dup() and that it effectively results in setting len to -1
and writing the zero byte *before* the string (and not terminating the
string).
This patch makes use of the recently introduced smp_make_safe() to address
this issue.
This fix must be backported to 1.6.
Since commit 6879ad3 ("MEDIUM: sample: fill the struct sample with the
session, proxy and stream pointers") merged in 1.6-dev2, the sample
contains the pointer to the stream and sample fetch functions as well
as converters use it heavily.
The problem is that earlier commit 87b0966 ("REORG/MAJOR: session:
rename the "session" entity to "stream"") had split the session and
stream resulting in the possibility for smp->strm to be NULL before
the stream was initialized. This is what happens in tcp-request
connection rulesets, as discovered by Baptiste.
The sample fetch functions must now check that smp->strm is valid
before using it. An alternative could consist in using a dummy stream
with nothing in it to avoid some checks but it would only result in
deferring them to the next step anyway, and making it harder to detect
that a stream is valid or the dummy one.
There is still an issue with variables which requires a complete
independant fix. They use strm->sess to find the session with strm
possibly NULL and passed as an argument. All call places indirectly
use smp->strm to build strm. So the problem is there but the API needs
to be changed to remove this duplicate argument that makes it much
harder to know what pointer to use.
This fix must be backported to 1.6, as well as the next one fixing
variables.
There is a bug in connect_server() : we use si_attach_conn() to offer
the current session's connection to the session we're stealing the
connection from. Unfortunately, si_attach_conn() uses the standard data
connection operations while here we need to use the idle connection
operations.
This results in a situation where when the server's idle timeout strikes,
the read0 is silently ignored, causes the response channel to be shut down
for reads, and the connection remains attached. Next attempt to send a
request when using this connection simply results in nothing being done
because we try to send over an already closed connection. Worse, if the
client aborts, then no timeout remains at all and the session waits
forever and remains assigned to the server.
A more-or-less easy way to reproduce this bug is to have two concurrent
streams each connecting to a different server with "http-reuse aggressive",
typically a cache farm using a URL hash :
stream1: GET /1 HTTP/1.1
stream2: GET /2 HTTP/1.1
stream1: GET /2 HTTP/1.1
wait for the server 1's connection to timeout
stream2: GET /1 HTTP/1.1
The connection hangs here, and "show sess all" shows a closed connection
with a SHUTR on the response channel.
The fix is very simple though not optimal. It consists in calling
si_idle_conn() again after attaching the connection. But in practise
it should not be done like this. The real issue is that there's no way
to cleanly attach a connection to a stream interface without changing
the connection's operations. So the API clearly needs to be revisited
to make such operations easier.
Many thanks to Yves Lafon from W3C for providing lots of useful dumps
and testing patches to help figure the root cause!
This fix must be backported to 1.6.
This was the first transparent proxy technology supported by haproxy
circa 2005 but it was obsoleted in 2007 by Tproxy 4.0 which removed a
lot of the earlier versions' shortcomings and was finally merged into
the kernel. Since nobody has been using cttproxy for many years now
and nobody has even just tried to compile the files, it's time to
remove it. The doc was updated as well.
The union name "data" is a little bit heavy while we read the source
code because we can read "data.data.sint". The rename from "data" to "u"
makes the read easiest like "data.u.sint".
This patch remove the struct information stored both in the struct
sample_data and in the striuct sample. Now, only thestruct sample_data
contains data, and the struct sample use the struct sample_data for storing
his own data.
This strategy is less extreme than "always", it only dispatches first
requests to validated reused connections, and moves a connection from
the idle list to the safe list once it has seen a second request, thus
proving that it could be reused.
The "safe" mode consists in picking existing connections only when
processing a request that's not the first one from a connection. This
ensures that in case where the server finally times out and closes, the
client can decide to replay idempotent requests.
Now instead of closing the existing connection attached to the
stream interface, we first check if the one we pick was attached to
another stream interface, in which case the connections are swapped
if possible (eg: if the current connection is not private). That way
the previous connection remains attached to an existing session and
significantly increases the chances of being reused.
In connect_server(), if we don't have a connection attached to the
stream-int, we first look into the server's idle_conns list and we
pick the first one there, we detach it from its owner if it had one.
If we used to have a connection, we close it.
This mechanism works well but doesn't scale : as servers increase,
the likeliness that the connection attached to the stream interface
doesn't match the server and gets closed increases.
This flag is set on an outgoing connection when this connection gets
some properties that must not be shared with other connections, such
as dynamic transparent source binding, SNI or a proxy protocol header,
or an authentication challenge from the server. This will be needed
later to implement connection reuse.
Since we now always call this function with the reuse parameter cleared,
let's simplify the function's logic as it cannot return the existing
connection anymore. The savings on this inline function are appreciable
(240 bytes) :
$ size haproxy.old haproxy.new
text data bss dec hex filename
1020383 40816 36928 1098127 10c18f haproxy.old
1020143 40816 36928 1097887 10c09f haproxy.new
connect_server() already does most of the check that is done again in
si_alloc_conn(), so let's simply reuse the existing connection instead
of calling the function again. It will also simplify the connection
reuse.
Indeed, for reuse to be set, it also requires srv_conn to be valid. In the
end, the only situation where we have to release the existing connection
and allocate a new one is when reuse == 0.
objt_server() is called multiple times at various places while some
places already make use of srv for this. Let's move the call at the
top of the function and use it all over the place.
This patch removes the 32 bits unsigned integer and the 32 bit signed
integer. It replaces these types by a unique type 64 bit signed.
This makes easy the usage of integer and clarify signed and unsigned use.
With the previous version, signed and unsigned are used ones in place of
others, and sometimes the converter loose the sign. For example, divisions
are processed with "unsigned", if one entry is negative, the result is
wrong.
Note that the integer pattern matching and dotted version pattern matching
are already working with signed 64 bits integer values.
There is one user-visible change : the "uint()" and "sint()" sample fetch
functions which used to return a constant integer have been replaced with
a new more natural, unified "int()" function. These functions were only
introduced in the latest 1.6-dev2 so there's no impact on regular
deployments.
The new "sni" server directive takes a sample fetch expression and
uses its return value as a hostname sent as the TLS SNI extension.
A typical use case consists in forwarding the front connection's SNI
value to the server in a bridged HTTPS forwarder :
sni ssl_fc_sni
This patch removes the structs "session", "stream" and "proxy" from
the sample-fetches and converters function prototypes.
This permits to remove some weight in the prototype call.
The get_server_ph_post() function assumes that the buffer is contiguous.
While this is true for all the header part, it is not necessarily true
for the end of data the fit in the reserve. In this case there's a risk
to read past the end of the buffer for a few hundred bytes, and possibly
to crash the process if what follows is not mapped.
The fix consists in truncating the analyzed length to the length of the
contiguous block that follows the headers.
A config workaround for this bug would be to disable balance url_param.
This fix must be backported to 1.5. It seems 1.4 did have the check.
Many such function need a session, and till now they used to dereference
the stream. Once we remove the stream from the embryonic session, this
will not be possible anymore.
So as of now, sample fetch functions will be called with this :
- sess = NULL, strm = NULL : never
- sess = valid, strm = NULL : tcp-req connection
- sess = valid, strm = valid, strm->txn = NULL : tcp-req content
- sess = valid, strm = valid, strm->txn = valid : http-req / http-res
All of them can now retrieve the HTTP transaction *if it exists* from
the stream and be sure to get NULL there when called with an embryonic
session.
The patch is a bit large because many locations were touched (all fetch
functions had to have their prototype adjusted). The opportunity was
taken to also uniformize the call names (the stream is now always "strm"
instead of "l4") and to fix indent where it was broken. This way when
we later introduce the session here there will be less confusion.
Now this one is dynamically allocated. It means that 280 bytes of memory
are saved per TCP stream, but more importantly that it will become
possible to remove the l7 pointer from fetches and converters since
it will be deduced from the stream and will support being null.
A lot of care was taken because it's easy to forget a test somewhere,
and the previous code used to always trust s->txn for being valid, but
all places seem to have been visited.
All HTTP fetch functions check the txn first so we shouldn't have any
issue there even when called from TCP. When branching from a TCP frontend
to an HTTP backend, the txn is properly allocated at the same time as the
hdr_idx.
When s->si[0].end was dereferenced as a connection or anything in
order to retrieve information about the originating session, we'll
now use sess->origin instead so that when we have to chain multiple
streams in HTTP/2, we'll keep accessing the same origin.
Just like for the listener, the frontend is session-wide so let's move
it to the session. There are a lot of places which were changed but the
changes are minimal in fact.
With HTTP/2, we'll have to support multiplexed streams. A stream is in
fact the largest part of what we currently call a session, it has buffers,
logs, etc.
In order to catch any error, this commit removes any reference to the
struct session and tries to rename most "session" occurrences in function
names to "stream" and "sess" to "strm" when that's related to a session.
The files stream.{c,h} were added and session.{c,h} removed.
The session will be reintroduced later and a few parts of the stream
will progressively be moved overthere. It will more or less contain
only what we need in an embryonic session.
Sample fetch functions and converters will have to change a bit so
that they'll use an L5 (session) instead of what's currently called
"L4" which is in fact L6 for now.
Once all changes are completed, we should see approximately this :
L7 - http_txn
L6 - stream
L5 - session
L4 - connection | applet
There will be at most one http_txn per stream, and a same session will
possibly be referenced by multiple streams. A connection will point to
a session and to a stream. The session will hold all the information
we need to keep even when we don't yet have a stream.
Some more cleanup is needed because some code was already far from
being clean. The server queue management still refers to sessions at
many places while comments talk about connections. This will have to
be cleaned up once we have a server-side connection pool manager.
Stream flags "SN_*" still need to be renamed, it doesn't seem like
any of them will need to move to the session.
These 4 combinations are needlessly complicated since the session already
has direct access to the associated stream interfaces without having to
check an indirect pointer.
The purpose of these two macros will be to pass via the session to
find the relevant stream interfaces so that we don't need to store
the ->cons nor ->prod pointers anymore. Currently they're only defined
so that all references could be removed.
Note that many places need a second pass of clean up so that we don't
have any chn_prod(&s->req) anymore and only &s->si[0] instead, and
conversely for the 3 other cases.
