Now we can detect the listener associated with a QUIC listener and report
a bit more info (e.g. listening port and frontend name), and provide a bit
more info about connections as well, and filter on both front connections
and listeners using the "l" and "f" flags.
This provides more consistency between the master and the worker. When
"prompt timed" is passed on the master, the timed mode is toggled. When
enabled, for a master it will show the master process' uptime, and for
a worker it will show this worker's uptime. Example:
master> prompt timed
[0:00:00:50] master> show proc
#<PID> <type> <reloads> <uptime> <version>
11940 master 1 [failed: 0] 0d00h02m10s 2.8-dev11-474c14-21
# workers
11955 worker 0 0d00h00m59s 2.8-dev11-474c14-21
# old workers
11942 worker 1 0d00h02m10s 2.8-dev11-474c14-21
# programs
[0:00:00:58] master> @!11955
[0:00:01:03] 11955> @!11942
[0:00:02:17] 11942> @
[0:00:01:10] master>
Entering "prompt timed" toggles reporting of the process' uptime in
the prompt, which will report days, hours, minutes and seconds since
it was started. As discussed with Tim in issue #2145, this can be
convenient to roughly estimate the time between two outputs, as well
as detecting that a process failed to be reloaded for example.
There's something very irritating on the CLI, when just pressing ENTER,
it complains "Unknown command: ''..." and dumps all the help. This
action is often done to add a bit of clearance after a dump to visually
find delimitors later, but this stupid error makes it unusable. This
patch addresses this by just returning on empty command instead of trying
to look up a matching keyword. It will result in an empty line to mark
the end of the empty command and a prompt again.
It's probably not worth backporting this given that nobody seems to have
complained about it yet.
sc_need_room() now takes the required free space to receive more data as
parameter. All calls to this function are updated accordingly. For now, this
value is set but not used. When we are waiting for a buffer, 0 is used. So
we expect to be unblocked ASAP. However this must be reviewed because
SC_FL_NEED_BUF is probably enough in this case and this flag is already set
if the input buffer allocation fails.
Instead of using the channel API to to write output message from the CLI
applet, we use the applet API. This way, the applet does not need to take
care to request more room it it fails to put its message into the channel's
buffer.
This puts an end to the occasional confusion between the "now" date
that is internal, monotonic and not synchronized with the system's
date, and "date" which is the system's date and not necessarily
monotonic. Variable "now" was removed and replaced with a 64-bit
integer "now_ns" which is a counter of nanoseconds. It wraps every
585 years, so if all goes well (i.e. if humanity does not need
haproxy anymore in 500 years), it will just never wrap. This implies
that now_ns is never nul and that the zero value can reliably be used
as "not set yet" for a timestamp if needed. This will also simplify
date checks where it becomes possible again to do "date1<date2".
All occurrences of "tv_to_ns(&now)" were simply replaced by "now_ns".
Due to the intricacies between now, global_now and now_offset, all 3
had to be turned to nanoseconds at once. It's not a problem since all
of them were solely used in 3 functions in clock.c, but they make the
patch look bigger than it really is.
The clock_update_local_date() and clock_update_global_date() functions
are now much simpler as there's no need anymore to perform conversions
nor to round the timeval up or down.
The wrapping continues to happen by presetting the internal offset in
the short future so that the 32-bit now_ms continues to wrap 20 seconds
after boot.
The start_time used to calculate uptime can still be turned to
nanoseconds now. One interrogation concerns global_now_ms which is used
only for the freq counters. It's unclear whether there's more value in
using two variables that need to be synchronized sequentially like today
or to just use global_now_ns divided by 1 million. Both approaches will
work equally well on modern systems, the difference might come from
smaller ones. Better not change anyhting for now.
One benefit of the new approach is that we now have an internal date
with a resolution of the nanosecond and the precision of the microsecond,
which can be useful to extend some measurements given that timestamps
also have this resolution.
Instead we're using ns_to_sec(tv_to_ns(&now)) which allows the tv_sec
part to disappear. At this point, "now" is only used as a timeval in
clock.c where it is updated.
Let's get rid of timeval in storage of internal timestamps so that they
are no longer mistaken for wall clock time. These were exclusively used
subtracted from each other or to/from "now" after being converted to ns,
so this patch removes the tv_to_ns() conversion to use them natively. Two
occurrences of tv_isge() were turned to a regular wrapping subtract.
Instead of operating on {sec, usec} now we convert both operands to
ns then subtract them and convert to ms. This is a first step towards
dropping timeval from these timestamps.
Interestingly, tv_ms_elapsed() and tv_ms_remain() are no longer used at
all and could be removed.
In 2.7-dev2, "stats bind-process" was removed by commit 94f763b5e
("MEDIUM: config: remove deprecated "bind-process" directives from
frontends") and an error message indicates that it's no more supported.
However it says "stats" is not supported instead of "stats bind-process",
making it a bit confusing.
This should be backported to 2.7.
When compiled in debug mode, HAProxy prints a debug message at the end of
the cli I/O handle. It is pretty annoying and useless because, we can active
applet traces. Thus, just remove it.
SC_FL_EOS flag is added to report the end-of-stream at the SC level. It will
be used to distinguish end of stream reported by the endoint, via the
SE_FL_EOS flag, and the abort triggered by the stream, via the
SC_FL_ABRT_DONE flag.
In this patch, the flag is defined and is systematically tested everywhere
SC_FL_ABRT_DONE is tested. It should be safe because it is never set.
In the same way the previous commit, we stop to use SE_FL_ERROR flag from
analyzers and their sub-functions. We now fully rely on SC_FL_ERROR to do so.
From the stream, when SE_FL_ERROR flag is tested, we now also test the
SC_FL_ERROR flag. Idea is to stop to rely on the SE descriptor to detect
errors.
The flag SC_FL_ERROR is added to ack errors on the endpoint. When
SE_FL_ERROR flag is detected on the SE descriptor, the corresponding is set
on the SC. Idea is to avoid, as far as possible, to manipulated the SE
descriptor in upper layers and know when an error in the endpoint is handled
by the SC.
For now, this flag is only set and cleared but never tested.
SE_FL_ERR_PENDING is used to report an error on the write side. But it is
not a terminal error. Some incoming data may still be available. In the cli
analyzers, it is important to not close the stream when this flag is
set. Otherwise the response to a command can be truncated. It is probably
hard to observe. But it remains a bug.
While this patch could be backported to 2.7, there is no real reason to do
so, except if someone reports a bug about truncated responses.
Here again, it is just a flag renaming. In SC flags, there is no longer
shutdown for reads but aborts. For now this flag is set when a read0 is
detected. It is of couse not accurate. This will be changed later.
After the flag renaming, it is now the turn for the channel function to be
renamed and moved in the SC scope. channel_shutw_now() is replaced by
sc_schedule_shutdown(). The request channel is replaced by the front SC and
the response is replace by the back SC.
Because shutowns for reads are now considered as aborts, the shudowns for
writes can now be considered as shutdowns. Here it is just a flag
renaming. SC_FL_SHUTW_NOW is renamed SC_FL_SHUT_WANTED.
After the flag renaming, it is now the turn for the channel function to be
renamed and moved in the SC scope. channel_shutr_now() is replaced by
sc_schedule_abort(). The request channel is replaced by the front SC and the
response is replace by the back SC.
When the cli applet is executed while a shut is pending, the remaining
output data must always be consumed. Otherwise, this can prevent the stream
to exit, leading to a spinning loop on the applet.
This patch should fix the issue #2107. It is 2.8-specific. No backport
needed.
An applet must never set SE_FL_EOS flag without SE_FL_EOI or SE_FL_ERROR
flags. Here, SE_FL_EOI flag was missing for "quit" or "_getsocks"
commands. Indeed, these commands are terminal.
This bug triggers a BUG_ON() recently added.
This patch is related to the issue #2107. It is 2.8-specific. No backport
needed.
The purpose of this patch is only a one-to-one replacement, as far as
possible.
CF_SHUTR(_NOW) and CF_SHUTW(_NOW) flags are now carried by the
stream-connecter. CF_ prefix is replaced by SC_FL_ one. Of course, it is not
so simple because at many places, we were testing if a channel was shut for
reads and writes in same time. To do the same, shut for reads must be tested
on one side on the SC and shut for writes on the other side on the opposite
SC. A special care was taken with process_stream(). flags of SCs must be
saved to be able to detect changes, just like for the channels.
It is the same kind of change than for the cache applet. Idea is to use the SE
desc instead of the channel or the SC to report end-of-input, end-of-stream and
errors.
Truncated commands are now reported on error. Other changes are the same than
for the cache applet. We now set SE_FL_EOS flag instead of calling cf_shutr()
and calls to cf_shutw are removed.
Depending on what we're debugging, some FDs can represent pollution in
the "show fd" output. Here we add a set of filters allowing to pick (or
exclude) any combination of listener, frontend conn, backend conn, pipes,
etc. "show fd l" will only list listening connections for example.
When FD are dumps, the connection error code is now displayed. This may help
to diagnose why a connection error occurred.
This patch may be backported to help debugging.
Anonymization mode has two CLI handlers "set anon <on|off>" and "set
anon global-key". The last one only requires admin level. However, as
cli_find_kw() is implemented, only the first handler will be retrieved
as they both start with the same prefix "set anon".
This has the effect to execute the wrong handler for "set anon
global-key" with an error message about an invalid keyword. To fix this,
handlers definition have been separated for both "set anon on" and "set
anon off" commands. This allows to have minimal changes while keeping
the same "set anon" prefix for each commands.
Also take this opportunity to fix a reference to a non-existing "set
global-key" CLI handler in the documentation.
This must be backported up to 2.7.
The half-closed timeout is now directly retrieved from the proxy
settings. There is no longer usage for the .hcto field in the stconn
structure. So let's remove it.
It was done by hand by callers when a shutdown for read or write was
performed. It is now always handled by the functions performing the
shutdown. This way the callers don't take care of it. This will avoid some
bugs.
Read and write timeouts (.rto and .wto) are now replaced by an unique
timeout, call .ioto. Since the recent refactoring on channel's timeouts,
both use the same value, the client timeout on client side and the server
timeout on the server side. Thus, this part may be simplified. Now it
represents the I/O timeout.
These timers are related to the I/O. Thus it is logical to move them into
the SE descriptor. The patch is a bit huge but it is just a
replacement. However it is error-prone.
From the stconn or the stream, helper functions are used to get, set or
reset these timers. This simplify the timers manipulations.
Read and write timeouts concerns the I/O. Thus, it is logical to move it into
the stconn. At the end, the stream is responsible to detect the timeouts. So
it is logcial to have these values in the stconn and not in the SE
descriptor. But it may change depending on the recfactoring.
So, now:
* scf->rto is used instead of req->rto
* scf->wto is used instead of res->wto
* scb->rto is used instead of res->rto
* scb->wto is used instead of req->wto
This patch removes CF_READ_ERROR and CF_WRITE_ERROR flags. We now rely on
SE_FL_ERR_PENDING and SE_FL_ERROR flags. SE_FL_ERR_PENDING is used for write
errors and SE_FL_ERROR for read or unrecoverable errors.
When a connection error is reported, SE_FL_ERROR and SE_FL_EOS are now set and a
read event and a write event are reported to be sure the stream will properly
process the error. At the stream-connector level, it is similar. When an error
is reported during a send, a write event is triggered. On the read side, nothing
more is performed because an error at this stage is enough to wake the stream
up.
A major change is brought with this patch. We stop to check flags of the
ooposite channel to report abort or timeout. It also means when an read or
write error is reported on a side, we no longer update the other side. Thus
a read error on the server side does no long lead to a write error on the
client side. This should ease errors report.
This flag was introduced in 1.3 to fix a design issue. It was untouch since
then but there is no reason to still have this trick. Note it could be good
to review what happens in HTTP with the server is waiting for the end of the
request. It could be good to be sure a client timeout is always reported.
Instead of reading and storing a single group and a single mask for a
"thread" directive on a bind line, we now store the complete range in
a thread set that's stored in the bind_conf. The bind_parse_thread()
function now just calls parse_thread_set() to complete the current set,
which starts empty, and thread_resolve_group_mask() was updated to
support retrieving thread group numbers or absolute thread numbers
directly from the pre-filled thread_set, and continue to feed bind_tgroup
and bind_thread. The CLI parsers which were pre-initialized to set the
bind_tgroup to 1 cannot do it anymore as it would prevent one from
restricting the thread set. Instead check_config_validity() now detects
the CLI frontend and passes the info down to thread_resolve_group_mask()
that will automatically use only the group 1's threads for these
listeners. The same is done for the peers listeners for now.
At this step it's already possible to start with all previous valid
configs as well as extended ones supporting comma-delimited thread
sets. In addition the parser already accepts large ranges spanning
multiple groups, but since the underlying listeners infrastructure
is not read, for now we're maintaining a specific check against this
at the higher level of the config validity check.
The patch is a bit large because thread resolution is performed in
multiple steps, so we need to adjust all of them at once to preserve
functional and technical consistency.
These two flags are entirely for internal use and are even per proxy
in practice since they're used for peers and CLI to indicate (for the
first one) that the listener(s) are not subject to connection limits,
and for the second that the listener(s) should not be stopped on
soft-stop. No need to keep them in the listeners, let's move them to
the bind_conf under names BC_O_UNLIMITED and BC_O_NOSTOP.
This field is used by stream_new() to optionally set the applet the
stream will connect to for simple proxies like the CLI for example.
But it has never been configurable to anything and is always strictly
equal to the frontend's ->default_target. Let's just drop it and make
stream_new() only use the frontend's. It makes more sense anyway as
we don't want the proxy to work differently based on the "bind" line.
This idea was brought in 1.6 hoping that the h2 implementation would
use applets for decoding (which was dropped after the very first
attempt in 1.8).
The accept callback directly derives from the upper layer, generally
it's session_accept_fd(). As such it's also defined per bind line
so it makes sense to move it there.
In applets, we stop processing when a write error (CF_WRITE_ERROR) or a shutdown
for writes (CF_SHUTW) is detected. However, any write error leads to an
immediate shutdown for writes. Thus, it is enough to only test if CF_SHUTW is
set.
CF_READ_ATTACHED flag is only used in input events for stream analyzers,
CF_MASK_ANALYSER. A read event can be reported instead and this flag can be
removed. We must only take care to report a read event when the client
connection is upgraded from TCP to HTTP.
Just like CF_READ_PARTIAL, CF_WRITE_PARTIAL is now merged with
CF_WRITE_EVENT. There a subtlety in sc_notify(). The "connect" event
(formely CF_WRITE_NULL) is now detected with
(CF_WRITE_EVENT + sc->state < SC_ST_EST).
CF_READ_NULL flag is not really useful and used. It is a transient event
used to wakeup the stream. As we will see, all read events on a channel may
be resumed to only one and are all used to wake up the stream.
In this patch, we introduce CF_READ_EVENT flag as a replacement to
CF_READ_NULL. There is no breaking change for now, it is just a
rename. Gradually, other read events will be merged with this one.
If CF_READ_NULL flag is set on a channel, it implies a shutdown for reads
was performed and CF_SHUTR is also set on this channel. Thus, there is no
reason to test is any of these flags is present, testing CF_SHUTR is enough.
Initially the code was placed into cli.c to keep activity.c small and
independent of the cli stuff, but that's no longer the case anyway and
keeping that code over there makes it harder to find. Let's move it to
its more natural place now.
It happened a few times that it was difficult to figure if a counter was
normal or not in "show activity" based on the uptime. Let's just emit the
uptime value along with the date.
It is useful because when we're passing data to runtime API, specially
via code, we can mistakenly send newlines leading to some lines being
wrongly interpretted as commands.
This is analogous to how it's done in a shell, example bash:
$ not_found arg1
bash: not_found: command not found...
$
Real world example: Following the official docs to add a cert:
$ echo -e "set ssl cert ./cert.pem <<\n$(cat ./cert.pem)\n" | socat stdio tcp4-connect:127.0.0.1:9999
Note, how the payload is sent via '<<\n$(cat ./cert.pem)\n'. If cert.pem
contains a newline between various PEM blocks, which is valid, the above
command would generate a flood of 'Unknown command' messages for every
line sent after the first newline. As a new user, this detail is not
clearly visible as socket API doesn't say what exactly what was 'unknown'
about it. The cli interface should be obvious around guiding user on
"what do do next".
This commit changes that by printing the parsed cmd in output like
'Unknown command: "<cmd>"' so the user gets clear "next steps", like
bash, regarding what indeed was the wrong command that HAproxy couldn't
interpret.
Previously:
$ echo -e "show version\nhelpp"| socat ./haproxy.sock - | head -n4
2.7-dev6
Unknown command, but maybe one of the following ones is a better match:
add map [@<ver>] <map> <key> <val> : add a map entry (payload supported instead of key/val)
Now:
$ echo -e "show version\nhelpp"| socat ./haproxy.sock - | head -n4
2.7-dev8-737bb7-156
Unknown command: 'helpp', but maybe one of the following ones is a better match:
add map [@<ver>] <map> <key> <val> : add a map entry (payload supported instead of key/val)
CLI 'add server' handler relies on usermsgs_ctx to display errors in
internal function on CLI output. This may be also extended to other
handlers.
However, to not clutter stderr from another contextes, usermsgs_ctx must
be resetted when it is not needed anymore. This operation cannot be
conducted in the CLI parse handler as display is conducted after it.
To achieve this, define new CLI states CLI_ST_PRINT_UMSG /
CLI_ST_PRINT_UMSGERR. Their principles is nearly identical to states for
dynamic messages printing.
Rename CLI_ST_PRINT_FREE to CLI_ST_PRINT_DYNERR.
Most notably, this highlights that this is reserved to error printing.
This is done to ensure consistency between CLI_ST_PRINT/CLI_ST_PRINT_DYN
and CLI_ST_PRINT_ERR/CLI_ST_PRINT_DYNERR. The name is also consistent
with the function cli_dynerr() which activates it.
Correct a commentary in in include/haproxy/global-t.h and include/haproxy/tools.h
Replace the CLI command 'set global-key <key>' by 'set anon global-key <key>' in
order to find it easily when you don't remember it, the recommandation can guide
you when you just tap 'set anon'.
No backport needed, except if anonymization mechanism is backported.
Removed the error message in 'set anon on|off', it's more user
friendly: users use 'set anon on' even if the mode is already
activated, and the same for 'set anon off'. That allows users
to write the command line in the anonymized mode they want
without errors.
No backport needed, except if anonymization mechanism is backported.
Upon a reload with the master CLI, the FD of the master CLI session is
received by the internal socketpair listener.
This session is used to display the status of the reload and then will
close.
In order to allow users to dump internal states using a specific key
without changing the global one, we're introducing a key in the CLI's
appctx. This key is preloaded from the global one when "set anon on"
is used (and if none exists, a random one is assigned). And the key
can optionally be assigned manually for the whole CLI session.
A "show anon" command was also added to show the anon state, and the
current key if the users has sufficient permissions. In addition, a
"debug dev hash" command was added to test the feature.
Add a uint32_t key in global to hash words with it. A new CLI command
'set global-key <key>' was added to change the global anonymizing key.
The global may also be set in the configuration using the global
"anonkey" directive. For now this key is not used.
Erwan Le Goas reported that chaining certain commands on the CLI would
systematically crash the process; for example, "show version; show sess".
This happened since the conversion of cli context to appctx->svcctx,
because if applet_reserve_svcctx() is called a first time for a tiny
context, it's allocated in-situ, and later a keyword that wants a
larger one will see that it's not null and will reuse it and will
overwrite the end of the first one's context.
What is missing is a reset of the svcctx when looping back to
CLI_ST_GETREQ.
This needs to be backported to 2.6, and relies on previous commit
"MINOR: applet: add a function to reset the svcctx of an applet".
The previous attempt was reverted because it would emit a warning when
the sockets are still in the process when a reload failed, so this was
an expected 2nd try.
This warning however, will be displayed if a new process successfully
get the previous sockets AND the sendable number of sockets is 0.
This way the user will be warned if he tried to get the sockets fromt
the wrong process.
The _getsocks CLI command can be used only once, after that the sockets
are not available anymore.
Emit a warning when the command was already used once.
Since e8422bf ("MEDIUM: global: remove the relative_pid from global and
mworker"), the relative pid prefix is not tested anymore on the master
CLI. Which means any value will fall into the "1" process.
Since we removed the nbproc, only the "1" and the "0" (master) value are
correct, any other value should return an error.
Fix issue #1793.
This must be backported as far as 2.5.
When using multiple groups, the stats socket starts to emit errors and
it's not natural to have to touch the global section just to specify
"thread 1/all". Let's pre-attach these sockets to thread group 1. This
will cause errors when trying to change the group but this really is not
a problem for now as thread groups are not enabled by default. This will
make sure configs remain portable and may possibly be relaxed later.
As a side effect of commit 34aae2fd1 ("MEDIUM: mworker: set the iocb of
the socketpair without using fd_insert()"), a config may now refuse to
start if there are multiple groups configured because the default bind
mask may span over multiple groups, and it is not possible to force it
to work differently.
Let's just assign thread group 1 to the master<->worker sockets so that
the thread bindings automatically resolve to a single group. The same was
done for the master side of the socket even if it's not used. It will
avoid being forgotten in the future.
This was already causing a deprecation warning and was marked for removal
in 2.7, now it happens. An error message indicates this doesn't exist
anymore.
The "ctx" and "st2" parts in the appctx were marked for removal in 2.7
and were emulated using memcpy/memset etc for possible external code.
Let's remove this now.
The output of "show activity" can be so large that the output is visually
unreadable on a screen. Let's add an option to filter on the desired
column (actually the thread number), use "0" to report only the first
column (aggregated/sum/avg), and use "-1", the default, for the normal
detailed dump.
The CLI applet process one request after another. Thus, when several
requests are pipelined, it is important to notify it won't consume remaining
outgoing data while it is processing a request. Otherwise, the applet may be
woken up in loop. For instance, it may happen with the HTTP client while we
are waiting for the server response if a shutr is received.
This patch must be backported in all supported versions after an observation
period. But a massive refactoring was performed in 2.6. So, for the 2.5 and
below, the patch will have to be adapted. Note also that, AFAIK, the bug can
only be triggered by the HTTP client for now.
There's no more reason for keepin the code and definitions in conn_stream,
let's move all that to stconn. The alphabetical ordering of include files
was adjusted.
This file contains all the stream-connector functions that are specific
to application layers of type stream. So let's name it accordingly so
that it's easier to figure what's located there.
The alphabetical ordering of include files was preserved.
The new name mor eclearly indicates that a stream connector cannot make
any more progress because it needs room in the channel buffer, or that
it may be unblocked because the buffer now has more room available. The
testing function is sc_waiting_room(). This is mostly used by applets.
Note that the flags will change soon.
The following functions which act on a connection-based stream connector
were renamed to sc_conn_* (~60 places):
cs_conn_drain_and_shut
cs_conn_process
cs_conn_read0
cs_conn_ready
cs_conn_recv
cs_conn_send
cs_conn_shut
cs_conn_shutr
cs_conn_shutw
These functions return the app-layer associated with an stconn, which
is a check, a stream or a stream's task. They're used a lot to access
channels, flags and for waking up tasks. Let's just name them
appropriately for the stream connector.
We're starting to propagate the stream connector's new name through the
API. Most call places of these functions that retrieve the channel or its
buffer are in applets. The local variable names are not changed in order
to keep the changes small and reviewable. There were ~92 uses of cs_ic(),
~96 of cs_oc() (due to co_get*() being less factorizable than ci_put*),
and ~5 accesses to the buffer itself.
This applies the change so that the applet code stops using ci_putchk()
and friends everywhere possible, for the much saferapplet_put*() instead.
The change is mechanical but large. Two or three functions used to have no
appctx and a cs derived from the appctx instead, which was a reminiscence
of old times' stream_interface. These were simply changed to directly take
the appctx. No sensitive change was performed, and the old (more complex)
API is still usable when needed (e.g. the channel is already known).
The change touched roughly a hundred of locations, with no less than 124
lines removed.
It's worth noting that the stats applet, the oldest of the series, could
get a serious lifting, as it's still very channel-centric instead of
propagating the appctx along the chain. Given that this code doesn't
change often, there's no emergency to clean it up but it would look
better.
This also follows the natural naming. There are roughly 238 changes, all
totally trivial. conn_stream-t.h has become completely void of any
"conn_stream" related stuff now (except its name).
This renames the "struct conn_stream" to "struct stconn" and updates
the descriptions in all comments (and the rare help descriptions) to
"stream connector" or "connector". This touches a lot of files but
the change is minimal. The local variables were not even renamed, so
there's still a lot of "cs" everywhere.
Just like for the appctx, this is a pointer to a stream endpoint descriptor,
so let's make this explicit and not confuse it with the full endpoint. There
are very few changes thanks to the preliminary refactoring of the flags
manipulation.
Now at least it makes it obvious that it's the stream endpoint descriptor
and not an endpoint. There were few changes thanks to the previous refactor
of the flags.
This changes all main uses of endp->flags to the se_fl_*() equivalent
by applying coccinelle script endp_flags.cocci. The se_fl_*() functions
themselves were manually excluded from the change, of course.
Note: 144 locations were touched, manually reviewed and found to be OK.
The script was applied with all includes:
spatch --in-place --recursive-includes -I include --sp-file $script $files
This one is the pointer to the conn_stream which is always in the
endpoint that is always present in the appctx, thus it's not needed.
This patch removes it and replaces it with appctx_cs() instead. A
few occurences that were using __cs_strm(appctx->owner) were moved
directly to appctx_strm() which does the equivalent.
The few applets that set CS_EP_EOI or CS_EP_ERROR used to set it on the
endpoint retrieved from the conn_stream while it's already available on
the appctx itself. Better use the appctx one to limit the unneeded
interactions between the two sides.
Now that the CLI's print context is alone in the appctx, it's possible
to refine the appctx's ctx layout so that the cli part matches exactly
a regular svcctx, and as such move the CLI context into an svcctx like
other applets. External code will still build and work because the
struct cli perfectly maps onto the struct cli_print_ctx that's located
into svc.storage. This is of course only to make a smooth transition
during 2.6 and will disappear immediately after.
A tiny change had to be applied to the opentracing addon which performs
direct accesses to the CLI's err pointer in its own print function. The
rest uses the standard cli_print_* which were the only ones that needed
a small change.
The whole "ctx.cli" struct could be tagged as deprecated so that any
possibly existing external code that relies on it will get build
warnings, and the comments in the struct are pretty clear about the
way to fix it, and the lack of future of this old API.
This one has been misused for a while as well, it's time to deprecate it
since we don't use it anymore. It will be removed in 2.7 and for now is
only marked as deprecated. Since we need to guarantee that it's zeroed
before starting any applet or CLI command, it was moved into an anonymous
union where its sibling is not marked as deprecated so that we can
continue to initialize it without triggering a warning.
If you found this commit after a bisect session you initiated to figure
why you got some build warnings and don't know what to do, have a look
at the code that deals with the "show fd", "show sess" or "show servers"
commands, as it's supposed to be self-explanatory about the tiny changes
to apply to your code to port it. If you find APPLET_MAX_SVCCTX to be
too small for your use case, either kindly ask for a tiny extension
(and try to get your code merged), or just use a pool.
Let's create a show_sock_ctx to store the bind_conf and the listener.
The entry is reserved when entering the I/O handler since there's no
parser here. That's fine because the function doesn't touch the area.
The code is was a bit convoluted by the use of a state machine around
st2 that is not used since only the STAT_ST_LIST state was used, and
the test of global.cli_fe inside the loop while it ought better be
tested before entering there. Let's get rid of this unneded state and
simplify the code. There's no more need for ->st2 now. The code looks
more changed than it really is due to the reindent caused by the
removal of the switch statement, but "git show -b" shows what really
changed.
There is the variable to start from (or environ) and an option to stop
after dumping the first one, just like "show fd". Let's have a small
locally-defined context with these two fields.
The "show fd" command used to rely on cli.i0 for the fd, and st2 just
to decide whether to stop after the first value or not. It could have
been possible to decide to use just a negative integer to dump a single
value, but it's as easy and more durable to declare a two-field struct
show_fd_ctx for this.
Historically the CLI was a second access to the stats and we've continued
to initialize only the stats part when initializing the CLI. Let's make
sure we do that on the whole ctx instead. It's probably not more needed
at all nowadays but better stay on the safe side.
Instead of using existing fields and having to put keyword-specific
contexts in the applet definition, let's have the appctx provide a
generic storage area that's currently large enough for existing CLI
commands and small applets, and a function to allocate that storage.
The function will be responsible for verifying that the requested size
fits in the area so that the caller doesn't need to add specific checks;
it is validated during development as this size is static and will
not change at runtime. In addition the caller doesn't even need to
free() the area since it's part of an existing context. For the
caller's convenience, a context pointer "svcctx" for the command is
also provided so that the allocated area can be placed there (or
possibly any other one in case a larger area is needed).
The struct's layout has been temporarily complicated by adding one
level of anonymous union on top of the "ctx" one. This will allow us
to preserve "ctx" during 2.6 for compatibility with possible external
code and get rid of it in 2.7. This explains why the diff extends to
the whole "ctx" union, but a "git show -b" shows that only one extra
layer was added. In order to make both the svcctx pointer and its
storage accessible without further enlarging the appctx structure,
both svcctx and the storage share the same storage as the ctx part.
This is done by having them placed in the union with a protected
overlapping area for svcctx, for which a shadow member is also
present in the storage area:
union {
void* svcctx; // variable accessed by services
struct {
void *shadow; // shadow of svcctx;
char storage[]; // where most services store their data
};
union { // older commands store here and ignore svcctx
...
} ctx;
};
I.e. new applications will use appctx->svcctx while older ones will be
able to continue to use appctx->ctx.*
The whole area (including the pointer's context) is zeroed before any
applet is initialized, and before CLI keyword processor's first invocation,
as it is an important part of the existing keyword processors, which makes
CLI keywords effectively behave like applets.
This command was introduced in 1.8 with commit eceddf722 ("MEDIUM: cli:
'show cli sockets' list the CLI sockets") but its yielding doesn't work.
Each time it enters, it restarts from the last bind_conf but enumerates
all listening sockets again, thus it loops forever. The risk that it
happens in field is low but it easily triggers on port ranges after
400-500 sockets depending on the length of their addresses:
global
stats socket /tmp/sock1 level admin
stats socket 192.168.8.176:30000-31000 level operator
$ socat /tmp/sock1 - <<< "show cli sockets"
(...)
ipv4@192.168.8.176:30426 operator all
ipv4@192.168.8.176:30427 operator all
ipv4@192.168.8.176:30428 operator all
ipv4@192.168.8.176:30000 operator all
ipv4@192.168.8.176:30001 operator all
ipv4@192.168.8.176:30002 operator all
^C
This patch adds the minimally needed restart point for the listener so
that it can easily be backported. Some more cleanup is needed though.
This flag is no longer needed now that it must always match the presence
of a destination address on the backend conn_stream. Worse, before previous
patch, if it were to be accidently removed while the address is present, it
could result in a leak of that address since alloc_dst_address() would first
be called to flush it.
Its usage has a long history where addresses were stored in an area shared
with the connection, but as this is no longer the case, there's no reason
for putting this burden onto application-level code that should not focus
on setting obscure flags.
The only place where that made a small difference is in the dequeuing code
in case of queue redistribution, because previously the code would first
clear the flag, and only later when trying to deal with the queue, would
release the address. It's not even certain whether there would exist a
code path going to connect_server() without calling pendconn_dequeue()
first (e.g. retries on queue timeout maybe?).
Now the pendconn_dequeue() code will rely on SF_ASSIGNED to decide to
clear and release the address, since that flag is always set while in
a server's queue, and its clearance implies that we don't want to keep
the address. At least it remains consistent and there's no more risk of
leaking it.
Only CS_EP_ERROR flag is now removed from the endpoint when a reset is
performed. When a new the endpoint is allocated, flags are preserved. It is
the caller responsibility to remove other flags, depending on its need.
Concretly, during a connection retry or a L7 retry, we must preserve
flags. In tcpcheck and the CLI, we reset flags.
This patch is 2.6-specific. No backport needed.
Remaining flags and associated functions are move in the conn-stream
scope. These flags are added on the endpoint and not the conn-stream
itself. This way it will be possible to get them from the mux or the
applet. The functions to get or set these flags are renamed accordingly with
the "cs_" prefix and updated to manipualte a conn-stream instead of a
stream-interface.
si_shutr(), si_shutw(), si_chk_rcv() and si_chk_snd() are moved in the
conn-stream scope and renamed, respectively, cs_shutr(), cs_shutw(),
cs_chk_rcv(), cs_chk_snd() and manipulate a conn-stream instead of a
stream-interface.
si_retnclose() is used to send a reply to a client before closing. There is
no use on the server side, in spite of the function is generic. Thus, it is
renamed stream_retnclose() and moved into the stream scope. The function now
handle a stream and explicitly send a message to the client.
The stream-interface state (SI_ST_*) is now in the conn-stream. It is a
mechanical replacement for now. Nothing special. SI_ST_* and SI_SB_* were
renamed accordingly. Utils functions to manipulate these infos were moved
under the conn-stream scope.
But it could be good to keep in mind that this part should be
reworked. Indeed, at the CS level, we only need to know if it is ready to
receive or to send. The state of conn-stream from INI to EST is only used on
the server side. The client CS is immediately set to EST. Thus current
SI_ST_* states should probably be moved to the stream to reflect the server
connection state during the establishment stage.
Only the server side is concerned by the stream-interface error type. It is
useless to have an err_type field on the client side. So, it is now move to
the stream. SI_ET_* are renames STRM_ET_* and moved in stream-t.h header
file.
The previous connection state on the client side was only used for debugging
purpose to report client close. But this may be handled when the client
stream-interface is switched from SI_ST_DIS to SI_ST_CLO.
So, there only remains the previous connection state on the server side that
is used by the stream, in process_stream(), to be able to set the correct
termination flags. Thus, instead of keeping this info in the
stream-interface for only one side, the info is now stored in the stream
itself.
Flag to not wake the stream up on I/O is now handled at the conn-stream
level. Thus SI_FL_DONT_WAKE stream-int flag is replaced by CS_FL_DONT_WAKE
conn-stream flags.
Flags to disable lingering and half-close are now handled at the conn-stream
level. Thus SI_FL_NOLINGER and SI_FL_NOHALF stream-int flags are replaced by
CS_FL_NOLINGER and CS_FL_NOHALF conn-stream flags.
Instead of relying on the conn-stream error, via CS_FL_ERR flags, we now
directly use the error at the endpoint level with the flag CS_EP_ERROR. It
should be safe to do so. But we must be careful because it is still possible
that an error is processed too early. Anyway, a conn-stream has always a
valid endpoint, maybe detached from any endpoint, but valid.
SI_FL_ERR is removed and replaced by CS_FL_ERROR. It is a transient patch
because the idea is to rely on the endpoint to handle errors at this
level. But if for any reason it is not possible, the stream-interface flags
will still be replaced.
The expiration date in the stream-interface was only used on the server side
to set the connect, queue or turn-around timeout. It was checked on the
frontend stream-interface, but never used concretely. So it was removed and
replaced by a connect expiration date in the stream itself. Thus, SI_FL_EXP
flag in stream-interfaces is replaced by a stream flag, SF_CONN_EXP.
The source and destination addresses at the applicative layer are moved from
the stream-interface to the conn-stream. This simplifies a bit the code and
it is a logicial step to remove the stream-interface.
The conn_retries counter may be moved into the stream structure. It only
concerns the connection establishment. The frontend stream-interface does not
use it. So it is a logical change.
At many places, we now use the new CS functions to get a stream or a channel
from a conn-stream instead of using the stream-interface API. It is the
first step to reduce the scope of the stream-interfaces. The main change
here is about the applet I/O callback functions. Before the refactoring, the
stream-interface was the appctx owner. Thus, it was heavily used. Now, as
far as possible,the conn-stream is used. Of course, it remains many calls to
the stream-interface API.
The conn-stream endpoint is now shared between the conn-stream and the
applet or the multiplexer. If the mux or the applet is created first, it is
responsible to also create the endpoint and share it with the conn-stream.
If the conn-stream is created first, it is the opposite.
When the endpoint is only owned by an applet or a mux, it is called an
orphan endpoint (there is no conn-stream). When it is only owned by a
conn-stream, it is called a detached endpoint (there is no mux/applet).
The last entity that owns an endpoint is responsible to release it. When a
mux or an applet is detached from a conn-stream, the conn-stream
relinquishes the endpoint to recreate a new one. This way, the endpoint
state is never lost for the mux or the applet.
Like for previous keyword classes, we're sorting the output. But this
time as it's not trivial to do it with multiple words, instead we're
proceeding like the help command, we sort them on their usage message
when present, and fall back to the first word of the command when there
is no usage message (e.g. "help" command).
New function cli_list_keywords() scans the list of registered CLI keywords
and dumps them on stdout. It's now called from dump_registered_keywords()
for the class "cli".
Some keywords are valid for the master, they'll be suffixed with
"[MASTER]". Others are valid for the worker, they'll have "[WORKER]".
Those accessible only in expert mode will show "[EXPERT]" and the
experimental ones will show "[EXPERIM]".
The response analyzer of the master CLI only handles read errors. So if
there is a write error, the session remains stuck because some outgoing data
are blocked in the channel and the response analyzer waits everything to be
sent. Because the maxconn is set to 10 for the master CLI, it may be
unresponsive if this happens to many times.
Now read and write errors, timeouts and client aborts are handled.
This patch should solve the issue #1512. It must be backported as far as
2.0.
Thanks to all previous changes, it is now possible to move the
stream-interface into the conn-stream. To do so, some SI functions are
removed and their conn-stream counterparts are added. In addition, the
conn-stream is now responsible to create and release the
stream-interface. While the stream-interfaces were inlined in the stream
structure, there is now a pointer in the conn-stream. stream-interfaces are
now dynamically allocated. Thus a dedicated pool is added. It is a temporary
change because, at the end, the stream-interface structure will most
probably disappear.
To be able to move the stream-interface from the stream to the conn-stream,
all access to the SI is done via the conn-stream. This patch is limited to
the cli part.
Because appctx is now an endpoint of the conn-stream, there is no reason to
still have the stream-interface as appctx owner. Thus, the conn-stream is
now the appctx owner.
Thanks to previous changes, it is now possible to set an appctx as endpoint
for a conn-stream. This means the appctx is no longer linked to the
stream-interface but to the conn-stream. Thus, a pointer to the conn-stream
is explicitly stored in the stream-interface. The endpoint (connection or
appctx) can be retrieved via the conn-stream.
The backend conn-stream is no longer released on connection retry. This
means the conn-stream is detached from the underlying connection but not
released. Thus, during connection retries, the stream has always an
allocated conn-stream with no connection. All previous changes were made to
make this possible.
Note that .attach() mux callback function was changed to get the conn-stream
as argument. The muxes are no longer responsible to create the conn-stream
when a server connection is attached to a stream.
"mcli-debug-mode on" enables every command that were meant for a worker,
on the CLI of the master. Which mean you can issue, "show fd", show
stat" in order to debug the MASTER proxy.
You can also combine it with "expert-mode on" or "experimental-mode on"
to access to more commands.
When in expert or experimental mode on the master CLI, and issuing a
command for the master process, all commands are prefixed by
"mode-experimental -" or/and "mode-expert on -", however these commands
were not available in the master applet, so the help was issued for
each one.
Allow to set the master CLI in expert or experimental mode. No command
within the master are unlocked yet, but it gives the ability to send
expert or experimental commands to the workers.
echo "@1; experimental-mode on; del server be1/s2" | socat /var/run/haproxy.master -
echo "experimental-mode on; @1 del server be1/s2" | socat /var/run/haproxy.master -
This reverts commit ea7371e934.
This can't work correctly as we need this FD in the worker to be
inserted in the fdtab. The correct way to do it would be to cleanup the
mworker_proc in the master after the fork().
mworker_cli_sockpair_new() is used to create the socketpair CLI listener of
the worker. Its FD is referenced in the mworker_proc structure, however,
once it's assigned to the listener the reference should be removed so we
don't use it accidentally.
The same must be done in case of errors if the FDs were already closed.
