In a previous commit this test was disabled because I though the
feature was broken, but in fact this is the test which is broken.
Indeed the connection between the server and the client was not
renegociated and was using the SSL cache or a ticket. To be work
correctly these 2 features must be disabled or a new connection must be
established after the ticket timeout, which is too long for a regtest.
Also a "nbthread 1" was added as it was easier to reproduce the problem
with it.
Now, some conformance tests are performed when an HTTP connection is
upgraded to websocket. This make the http-check-send.vtc script failed for
the backend <be6_ws>. Because the purpose of this health-check is to pass a
"Connection: Upgrade" header on an http-check send rule, we may use a dummy
protocal instead.
Test the conformance of websocket rfc6455 in haproxy. In particular, if
a missing key is detected on a h1 message, haproxy must close the
connection.
Note that the case h2 client/h1 srv is not tested as I did not find a
way to calculate the key on the server side.
The EOM block will be removed on the 2.4, thus this script will be broken on
this version. Now it is skipped for this version. It remains valid for 2.3
and 2.2.
When trying to update a backend certificate, we should find a
server-side ckch instance thanks to which we can rebuild a new ssl
context and a new ckch instance that replace the previous ones in the
server structure. This way any new ssl session will be built out of the
new ssl context and the newly updated certificate.
This resolves a subpart of GitHub issue #427 (the certificate part)
It is only a problem on the response path because the request payload length
it always known. But when a filter is registered to analyze the response
payload, the filtering may hang if the server closes just after the headers.
The root cause of the bug comes from an attempt to allow the filters to not
immediately forward the headers if necessary. A filter may choose to hold
the headers by not forwarding any bytes of the payload. For a message with
no payload but a known payload length, there is always a EOM block to
forward. Thus holding the EOM block for bodyless messages is a good way to
also hold the headers. However, messages with an unknown payload length,
there is no EOM block finishing the message, but only a SHUTR flag on the
channel to mark the end of the stream. If there is no payload when it
happens, there is no payload at all to forward. In the filters API, it is
wrongly detected as a condition to not forward the headers.
Because it is not the most used feature and not the obvious one, this patch
introduces another way to hold the message headers at the begining of the
forwarding. A filter flag is added to explicitly says the headers should be
hold. A filter may choose to set the STRM_FLT_FL_HOLD_HTTP_HDRS flag and not
forwad anything to hold the headers. This flag is removed at each call, thus
it must always be explicitly set by filters. This flag is only evaluated if
no byte has ever been forwarded because the headers are forwarded with the
first byte of the payload.
reg-tests/filters/random-forwarding.vtc reg-test is updated to also test
responses with unknown payload length (with and without payload).
This patch must be backported as far as 2.0.
If a server varies on the accept-encoding header and it sends a response
with an encoding we do not know (see parse_encoding_value function), we
will not store it. This will prevent unexpected errors caused by
cache collisions that could happen in accept_encoding_hash_cmp.
it does not seem to have a reason to close connections after each
request; reflect that in tests by doing all requests within the same
client.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
Add a base test to start with something, even though this is not
necessarily complete.
Also make use of the recent REQUIRE_SERVICE option to exclude it from
test list of it was not build with prometheus included.
note: I thought it was possible to send multiple requests within the
same client, but I'm getting "HTTP header is incomplete" from the second
request
Signed-off-by: William Dauchy <wdauchy@gmail.com>
- check functions are never called with a NULL args list, it is always
an array, so first check can be removed
- the expression parser guarantees that we can't have anything else,
because we mentioned json converter takes a mandatory string argument.
Thus test on `ARGT_STR` can be removed as well
- also add breaking line between enum and function declaration
In order to validate it, add a simple json test testing very simple
cases but can be improved in the future:
- default json converter without args
- json converter failing on error (utf8)
- json converter with error being removed (utf8s)
Signed-off-by: William Dauchy <wdauchy@gmail.com>
add base support for url encode following RFC3986, supporting `query`
type only.
- add test checking url_enc/url_dec/url_enc
- update documentation
- leave the door open for future changes
this should resolve github issue #941
Signed-off-by: William Dauchy <wdauchy@gmail.com>
This patch fixes GitHub Issue #988. Commit ce9e7b25217c46db1ac636b2c885a05bf91ae57e
was not sufficient, because it fell back to a hash comparison if the bitmap
of known encodings was not acceptable instead of directly returning the the
cached response is not compatible.
This patch also extends the reg-test to test the hash collision that was
mentioned in #988.
Vary handling is 2.4, no backport needed.
The accept-encoding part of the secondary key (vary) was only built out
of the first occurrence of the header. So if a client had two
accept-encoding headers, gzip and br for instance, the key would have
been built out of the gzip string. So another client that only managed
gzip would have been sent the cached resource, even if it was a br resource.
The http_find_header function is now called directly by the normalizers
so that they can manage multiple headers if needed.
A request that has more than 16 encodings will be considered as an
illegitimate request and its response will not be stored.
This fixes GitHub issue #987.
It does not need any backport.
Add a new check for a pseudo-websocket handshake, specifying the
Connection header to verify if it is properly handled by http-check send
directive. Also check that default http/1.1 checks have the header
Connection: close.
In case of successful unsafe method on a stored resource, the cached entry
must be invalidated (see RFC7234#4.4).
A "non-error response" is one with a 2xx (Successful) or 3xx (Redirection)
status code.
This implies that the primary hash must now be calculated on requests
that have an unsafe method (POST or PUT for instance) so that we can
disable the corresponding entries when we process the response.
When a response has an Age header (filled in by another cache on the
message's path) that is greater than its defined maximum age (extracted
either from cache-control directives or an expires header), it is
already stale and should not be cached.
This is simply txn_get_priv.vtc with the loading made using
lua-load-per-thread, allowing all threads to run independently.
There's nothing global nor thread-specific in this test, which makes
an excellent example of something that should work out of the box.
Four concurrent clients are initialized with 4 loops each so as to
give a little chance to various threads to run concurrently.
Turn the "Accept-Encoding" value to lower case before processing it.
Calculate the CRC on every token instead of a sorted concatenation of
them all (in order to avoir copying them) then XOR all the CRCs into a
single hash (while ignoring duplicates).
This patch adds a new logging variable '%HPO' for logging HTTP path only
(without query string) from relative or absolute URI.
For example:
log-format "hpo=%HPO hp=%HP hu=%HU hq=%HQ"
GET /r/1 HTTP/1.1
=>
hpo=/r/1 hp=/r/1 hu=/r/1 hq=
GET /r/2?q=2 HTTP/1.1
=>
hpo=/r/2 hp=/r/2 hu=/r/2?q=2 hq=?q=2
GET http://host/r/3 HTTP/1.1
=>
hpo=/r/3 hp=http://host/r/3 hu=http://host/r/3 hq=
GET http://host/r/4?q=4 HTTP/1.1
=>
hpo=/r/4 hp=http://host/r/4 hu=http://host/r/4?q=4 hq=?q=4
Historically, the input and output buffers of a check are allocated by hand
during the startup, with a specific size (not necessarily the same than
other buffers). But since the recent refactoring of the checks to rely
exclusively on the tcp-checks and to use the underlying mux layer, this part
is totally buggy. Indeed, because these buffers are now passed to a mux,
they maybe be swapped if a zero-copy is possible. In fact, for now it is
only possible in h2_rcv_buf(). Thus the bug concretely only exists if a h2
health-check is performed. But, it is a latent bug for other muxes.
Another problem is the size of these buffers. because it may differ for the
other buffer size, it might be source of bugs.
Finally, for configurations with hundreds of thousands of servers, having 2
buffers per check always allocated may be an issue.
To fix the bug, we now allocate these buffers when required using the buffer
pool. Thus not-running checks don't waste memory and muxes may swap them if
possible. The only drawback is the check buffers have now always the same
size than buffers used by the streams. This deprecates indirectly the
"tune.chksize" global option.
In addition, the http-check regtest have been update to perform some h2
health-checks.
Many thanks to @VigneshSP94 for its help on this bug.
This patch should solve the issue #936. It relies on the commit "MINOR:
tcpcheck: Don't handle anymore in-progress send rules in tcpcheck_main".
Both must be backport as far as 2.2.
bla
The cache section's process-vary option takes a 0 or 1 value to disable
or enable the vary processing.
When disabled, a response containing such a header will never be cached.
When enabled, we will calculate a preliminary hash for a subset of request
headers on all the incoming requests (which might come with a cpu cost) which
will be used to build a secondary key for a given request (see RFC 7234#4.1).
The default value is 0 (disabled).
Calculate a preliminary secondary key for every request we see so that
we can have a real secondary key if the response is cacheable and
contains a manageable Vary header.
The cache's ebtree is now allowed to have multiple entries with the same
primary key. Two of those entries will be distinguished thanks to
secondary keys stored in the cache_entry (based on hashes of a subset of
their headers).
When looking for an entry in the cache (cache_use), we still use the
primary key (built the same way as before), but in case of match, we
also need to check if the entry has a vary signature. If it has one, we
need to perform an extra check based on the newly built secondary key.
We will only be able to forge a response out of the cache if both the
primary and secondary keys match with one of our entries. Otherwise the
request will be forwarder to the server.
This patch adds -m flag which allows to specify header name
matching method when deleting headers from http request/response.
Currently beg, end, sub, str and reg are supported.
This is related to GitHub issue #909
As indicated in issue #907 it very frequently fails on FreeBSD, and
looking at it, it's broken in multiple ways. It relies on log ordering
between two layers, the first one being allowed to support h2. Given
that on FreeBSD it usually ends up in timeouts, it's very likely that
for some reason one frontend logs before the other one or that curl
uses h2 instead of h1 there, and that the log instance waits forever
for its lines.
Usually it works fine when run locally though, so let's not remove it
and mark it as broken instead so that it can still be used when relevant.
in the context of a progressive backend migration, we want to be able to
activate SSL on outgoing connections to the server at runtime without
reloading.
This patch adds a `set server ssl` command; in order to allow that:
- add `srv_use_ssl` to `show servers state` command for compatibility,
also update associated parsing
- when using default-server ssl setting, and `no-ssl` on server line,
init SSL ctx without activating it
- when triggering ssl API, de/activate SSL connections as requested
- clean ongoing connections as it is done for addr/port changes, without
checking prior server state
example config:
backend be_foo
default-server ssl
server srv0 127.0.0.1:6011 weight 1 no-ssl
show servers state:
5 be_foo 1 srv0 127.0.0.1 2 0 1 1 15 1 0 4 0 0 0 0 - 6011 - -1
where srv0 can switch to ssl later during the runtime:
set server be_foo/srv0 ssl on
5 be_foo 1 srv0 127.0.0.1 2 0 1 1 15 1 0 4 0 0 0 0 - 6011 - 1
Also update existing tests and create a new one.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
while looking at `url_dec` implementation I realised there was not yet a
simple test to avoid future regressions.
This one is testing simple case, including the "+" behaviour depending
on the argument passed to `url_dec`
Signed-off-by: William Dauchy <wdauchy@gmail.com>
There is apparently a race in this test that would require relying on
haproxy's output to make it reliably work, but currently vtest doesn't
have this option. Let's mark it broken again to avoid polluting the CI.
This is discussed in github issue #950.
Three filters are used. The compression filter is enclose by two trace filters,
both with the random forwarding enabled. An HTTP test is performed but also a
TCP test using an HTTP tunnel.
Add a reg-test verifying the fix in dea7c209f8a77b471323dd97bdc1ac4d7a17b812.
Some parts of the configuration used in the were taken from the initial bug
report from Maciej.
Should be backported together with dea7c209f8a77b471323dd97bdc1ac4d7a17b812
(all stable versions).
Co-authored-by: Maciej Zdeb <maciej@zdeb.pl>
Do not cache responses that do not have an explicit expiration time
(s-maxage or max-age Cache-Control directives or Expires header) or a
validator (ETag or Last-Modified headers) anymore, as suggested in
RFC 7234#3.
The TX_FLAG_IGNORE flag is used instead of the TX_FLAG_CACHEABLE so as
not to change the behavior of the checkcache option.
