The receiver is the one which depends on the protocol while the listener
relies on the receiver. Let's move the protocol there. Since there's also
a list element to get back to the listener from the proto list, this list
element (proto_list) was moved as well. For now when scanning protos, we
still see listeners which are linked by their rx.proto_list part.
A dedicated expiration date is now used to apply the inspect-delay of the
tcp-request or tcp-response rulesets. Before, the analyse expiratation date was
used but it may also be updated by the lua (at least). So a lua script may
extend or reduce the inspect-delay by side effect. This is not expected. If it
becomes necessary, a specific function will be added to do this. Because, for
now, it is a bit confusing.
The do-resolve HTTP action, performing a DNS resolution of a sample expression
output, is not thread-safe at all. The resolver object used to do the resolution
must be locked when the action is executed or when the stream is released
because its curr or wait resolution lists and the requester list inside a
resolution are updated. It is also important to not wake up a released stream
(with a destroyed task).
Of course, because of this bug, various kind of crashes may be observed.
This patch should fix the issue #236. It must be backported as far as 2.0.
The TRY_ADDQ there was not needed since the wait list is exclusively
owned by the caller. There's a preliminary test on MT_LIST_ADDED()
that might have been eliminated by keeping MT_LIST_TRY_ADDQ() but
it would have required two more expensive writes before testing so
better keep the test the way it is.
Initially when mt_lists were added, their purpose was to be used with
the scheduler, where anyone may concurrently add the same tasklet, so
it sounded natural to implement a check in MT_LIST_ADD{,Q}. Later their
usage was extended and MT_LIST_ADD{,Q} started to be used on situations
where the element to be added was exclusively owned by the one performing
the operation so a conflict was impossible. This became more obvious with
the idle connections and the new macro was called MT_LIST_ADDQ_NOCHECK.
But this remains confusing and at many places it's not expected that
an MT_LIST_ADD could possibly fail, and worse, at some places we start
by initializing it before adding (and the test is superflous) so let's
rename them to something more conventional to denote the presence of the
check or not:
MT_LIST_ADD{,Q} : inconditional operation, the caller owns the
element, and doesn't care about the element's
current state (exactly like LIST_ADD)
MT_LIST_TRY_ADD{,Q}: only perform the operation if the element is not
already added or in the process of being added.
This means that the previously "safe" MT_LIST_ADD{,Q} are not "safe"
anymore. This also means that in case of backport mistakes in the
future causing this to be overlooked, the slower and safer functions
will still be used by default.
Note that the missing unchecked MT_LIST_ADD macro was added.
The rest of the code will have to be reviewed so that a number of
callers of MT_LIST_TRY_ADDQ are changed to MT_LIST_ADDQ to remove
the unneeded test.
"show sess" and particularly "show sess all" can be very slow when dumping
lots of information, and while dumping, new sessions might appear, making
the output really endless. When threads are used, this causes a double
problem:
- all threads are paused during the dump, so an overly long dump degrades
the quality of service ;
- since all threads are paused, more events get postponed, possibly
resulting in more streams to be dumped on next invocation of the dump
function.
This patch addresses this long-lasting issue by doing something simple:
the CLI's stream is moved at the end of the steams list, serving as an
identifiable marker to end the dump, because all entries past it were
added after the command was entered. As a result, the CLI's stream always
appears as the last one.
It may make sense to backport this to stable branches where dumping live
streams is difficult as well.
This one was confusingly called, I thought it was the cumulated number
of streams but it's the number of calls to process_stream(). Let's make
this clearer.
This patch fixes all the leftovers from the include cleanup campaign. There
were not that many (~400 entries in ~150 files) but it was definitely worth
doing it as it revealed a few duplicates.
There's no point splitting the file in two since only cfgparse uses the
types defined there. A few call places were updated and cleaned up. All
of them were in C files which register keywords.
There is nothing left in common/ now so this directory must not be used
anymore.
This one was not easy because it was embarking many includes with it,
which other files would automatically find. At least global.h, arg.h
and tools.h were identified. 93 total locations were identified, 8
additional includes had to be added.
In the rare files where it was possible to finalize the sorting of
includes by adjusting only one or two extra lines, it was done. But
all files would need to be rechecked and cleaned up now.
It was the last set of files in types/ and proto/ and these directories
must not be reused anymore.
extern struct dict server_name_dict was moved from the type file to the
main file. A handful of inlined functions were moved at the bottom of
the file. Call places were updated to use server-t.h when relevant, or
to simply drop the entry when not needed.
The files remained mostly unchanged since they were OK. However, half of
the users didn't need to include them, and about as many actually needed
to have it and used to find functions like srv_currently_usable() through
a long chain that broke when moving the file.
This one is particularly difficult to split because it provides all the
functions used to manipulate a proxy state and to retrieve names or IDs
for error reporting, and as such, it was included in 73 files (down to
68 after cleanup). It would deserve a small cleanup though the cut points
are not obvious at the moment given the number of structs involved in
the struct proxy itself.
The current state of the logging is a real mess. The main problem is
that almost all files include log.h just in order to have access to
the alert/warning functions like ha_alert() etc, and don't care about
logs. But log.h also deals with real logging as well as log-format and
depends on stream.h and various other things. As such it forces a few
heavy files like stream.h to be loaded early and to hide missing
dependencies depending where it's loaded. Among the missing ones is
syslog.h which was often automatically included resulting in no less
than 3 users missing it.
Among 76 users, only 5 could be removed, and probably 70 don't need the
full set of dependencies.
A good approach would consist in splitting that file in 3 parts:
- one for error output ("errors" ?).
- one for log_format processing
- and one for actual logging.
It was moved without any change, however many callers didn't need it at
all. This was a consequence of the split of proto_http.c into several
parts that resulted in many locations to still reference it.
Almost no change except moving the cli_kw struct definition after the
defines. Almost all users had both types&proto included, which is not
surprizing since this code is old and it used to be the norm a decade
ago. These places were cleaned.
Just some minor reordering, and the usual cleanup of call places for
those which didn't need it. We don't include the whole tools.h into
stats-t anymore but just tools-t.h.
The type file was slightly tidied. The cli-specific APPCTX_CLI_ST1_* flag
definitions were moved to cli.h. The type file was adjusted to include
buf-t.h and not the huge buf.h. A few call places were fixed because they
did not need this include.
The files were moved almost as-is, just dropping arg-t and auth-t from
acl-t but keeping arg-t in acl.h. It was useful to revisit the call places
since a handful of files used to continue to include acl.h while they did
not need it at all. Struct stream was only made a forward declaration
since not otherwise needed.
The stktable_types[] array declaration was moved to the main file as
it had nothing to do in the types. A few declarations were reordered
in the types file so that defines were before the structs. Thread-t
was added since there are a few __decl_thread(). The loss of peers.h
revealed that cfgparse-listen needed it.
All includes that were not absolutely necessary were removed because
checks.h happens to very often be part of dependency loops. A warning
was added about this in check-t.h. The fields, enums and structs were
a bit tidied because it's particularly tedious to find anything there.
It would make sense to split this in two or more files (at least
extract tcp-checks).
The file was renamed to the singular because it was one of the rare
exceptions to have an "s" appended to its name compared to the struct
name.
The type file is becoming a mess, half of it is for the proxy protocol,
another good part describes conn_streams and mux ops, it would deserve
being split again. At least it was reordered so that elements are easier
to find, with the PP-stuff left at the end. The MAX_SEND_FD macro was moved
to compat.h as it's said to be the value for Linux.
The TASK_IS_TASKLET() macro was moved to the proto file instead of the
type one. The proto part was a bit reordered to remove a number of ugly
forward declaration of static inline functions. About a tens of C and H
files had their dependency dropped since they were not using anything
from task.h.
global.h was one of the messiest files, it has accumulated tons of
implicit dependencies and declares many globals that make almost all
other file include it. It managed to silence a dependency loop between
server.h and proxy.h by being well placed to pre-define the required
structs, forcing struct proxy and struct server to be forward-declared
in a significant number of files.
It was split in to, one which is the global struct definition and the
few macros and flags, and the rest containing the functions prototypes.
The UNIX_MAX_PATH definition was moved to compat.h.
This one is particularly tricky to move because everyone uses it
and it depends on a lot of other types. For example it cannot include
arg-t.h and must absolutely only rely on forward declarations to avoid
dependency loops between vars -> sample_data -> arg. In order to address
this one, it would be nice to split the sample_data part out of sample.h.
List.h was missing for LIST_ADDQ(). A few unneeded includes of action.h
were removed from certain files.
This one still relies on applet.h and stick-table.h.
A few includes were missing in each file. A definition of
struct polled_mask was moved to fd-t.h. The MAX_POLLERS macro was
moved to defaults.h
Stdio used to be silently inherited from whatever path but it's needed
for list_pollers() which takes a FILE* and which can thus not be
forward-declared.
Most of the file was a large set of HTX elements manipulation functions
and few types, so splitting them allowed to further reduce dependencies
and shrink the build time. Doing so revealed that a few files (h2.c,
mux_pt.c) needed haproxy/buf.h and were previously getting it through
htx.h. They were fixed.
The pretty confusing "buffer.h" was in fact not the place to look for
the definition of "struct buffer" but the one responsible for dynamic
buffer allocation. As such it defines the struct buffer_wait and the
few functions to allocate a buffer or wait for one.
This patch moves it renaming it to dynbuf.h. The type definition was
moved to its own file since it's included in a number of other structs.
Doing this cleanup revealed that a significant number of files used to
rely on this one to inherit struct buffer through it but didn't need
anything from this file at all.
This moves types/activity.h to haproxy/activity-t.h and
proto/activity.h to haproxy/activity.h.
The macros defining the bit field values for the profiling variable
were moved to the type file to be more future-proof.
Now the file is ready to be stored into its final destination. A few
minor reorderings were performed to keep the file properly organized,
making the various sections more visible (cache & lockless).
In addition and to stay consistent, memory.c was renamed to pool.c.
types/freq_ctr.h was moved to haproxy/freq_ctr-t.h and proto/freq_ctr.h
was moved to haproxy/freq_ctr.h. Files were updated accordingly, no other
change was applied.
This splits the hathreads.h file into types+macros and functions. Given
that most users of this file used to include it only to get the definition
of THREAD_LOCAL and MAXTHREADS, the bare minimum was placed into thread-t.h
(i.e. types and macros).
All the thread management was left to haproxy/thread.h. It's worth noting
the drop of the trailing "s" in the name, to remove the permanent confusion
that arises between this one and the system implementation (no "s") and the
makefile's option (no "s").
For consistency, src/hathreads.c was also renamed thread.c.
A number of files were updated to only include thread-t which is the one
they really needed.
Some future improvements are possible like replacing empty inlined
functions with macros for the thread-less case, as building at -O0 disables
inlining and causes these ones to be emitted. But this really is cosmetic.
