This option enables use of the PROXY protocol with the server, which
allows haproxy to transport original client's address across multiple
architecture layers.
It's very annoying that frontend and backend stats are merged because we
don't know what we're observing. For instance, if a "listen" instance
makes use of a distinct backend, it's impossible to know what the bytes_out
means.
Some points take care of not updating counters twice if the backend points
to the frontend, indicating a "listen" instance. The thing becomes more
complex when we try to add support for server side keep-alive, because we
have to maintain a pointer to the backend used for last request, and to
update its stats. But we can't perform such comparisons anymore because
the counters will not match anymore.
So in order to get rid of this situation, let's have both frontend AND
backend stats in the "struct proxy". We simply update the relevant ones
during activity. Some of them are only accounted for in the backend,
while others are just for frontend. Maybe we can improve a bit on that
later, but the essential part is that those counters now reflect what
they really mean.
This patch turns internal server addresses to sockaddr_storage to
store IPv6 addresses, and makes the connect() function use it. This
code already works but some caveats with getaddrinfo/gethostbyname
still need to be sorted out while the changes had to be merged at
this stage of internal architecture changes. So for now the config
parser will not emit an IPv6 address yet so that user experience
remains unchanged.
This change should have absolutely zero user-visible effect, otherwise
it's a bug introduced during the merge, that should be reported ASAP.
This one has been removed and is now totally superseded by ->target.
To get the server, one must use target_srv(&s->target) instead of
s->srv now.
The function ensures that non-server targets still return NULL.
s->prev_srv is used by assign_server() only, but all code paths leading
to it now take s->prev_srv from the existing s->srv. So assign_server()
can do that copy into its own stack.
If at one point a different srv is needed, we still have a copy of the
last server on which we failed a connection attempt in s->target.
When dealing with HTTP keep-alive, we'll have to know if we can reuse
an existing connection. For that, we'll have to check if the current
connection was made on the exact same target (referenced in the stream
interface).
Thus, we need to first assign the next target to the session, then
copy it to the stream interface upon connect(). Later we'll check for
equivalence between those two operations.
Till now we used the fact that the dispatch address was not null to use
the dispatch mode. This is very unconvenient, so let's have a dedicated
option.
When doing a connect() on a stream interface, some information is needed
from the server and from the backend. In some situations, we don't have
a server and only a backend (eg: peers). In other cases, we know we have
an applet and we don't want to connect to anything, but we'd still like
to have the info about the applet being used.
For this, we now store a pointer to the "target" into the stream interface.
The target describes what's on the other side before trying to connect. It
can be a server, a proxy or an applet for now. Later we'll probably have
descriptors for multiple-stage chains so that the final information may
still be found.
This will help removing many specific cases in the code. It already made
it possible to remove the "srv" and "be" parameters to tcpv4_connect_server().
Bryan Talbot reported that POST requests with a query string were not
correctly processed if the hash parameter was the first one, because
the delimiter that was looked for to trigger the parsing was '&' instead
of '?'.
Also, while checking the code, it became apparent that it was enough for
a query string to be present in the request for POST parameters to be
ignored, even if the url_param was in the body and not in the URL.
The code has then been fixed like this :
1) look for URL param. If found, return it.
2) if no URL param was found and method is POST, then look it up into
the body
The code now seems to pass all request combinations.
This patch must be backported to 1.4 since 1.4 is equally broken right now.
Till now, the forwarding code was making use of the hdr_content_len member
to hold the size of the last chunk parsed. As such, it was reset after being
scheduled for forwarding. The issue is that this entry was reset before the
data could be viewed by backend.c in order to parse a POST body, so the
"balance url_param check_post" did not work anymore.
In order to fix this, we need two things :
- the chunk size (reset upon every forward)
- the total body size (not reset)
hdr_content_len was thus replaced by the former (hence the size of the patch)
as it makes more sense to have it stored that way than the way around.
This patch should be backported to 1.4 with care, considering that it affects
the forwarding code.
When the number of servers is a multiple of the size of the input set,
map-based hash can be inefficient. This typically happens with 64
servers when doing URI hashing. The "avalanche" hash-type applies an
avalanche hash before performing a map lookup in order to smooth the
distribution. The result is slightly less smooth than the map for small
numbers of servers, but still better than the consistent hashing.
Till now when a server was configured with address 0.0.0.0, the
connection was forwarded to this address which generally is intercepted
by the system as a local address, so this was completely useless.
One sometimes useful feature for outgoing transparent proxies is to
be able to forward the connection to the same address the client
requested. This patch fixes the meaning of 0.0.0.0 precisely to
ensure that the connection will be forwarded to the initial client's
destination address.
It's not normal to initialize the server-side stream interface from the
accept() function, because it may change later. Thus, we introduce a new
stream_sock_prepare_interface() function which is called just before the
connect() and which sets all of the stream_interface's callbacks to the
default ones used for real sockets. The ->connect function is also set
at the same instant so that we can easily add new server-side protocols
soon.
The 'client.c' file now only contained frontend-specific functions,
so it has naturally be renamed 'frontend.c'. Same for client.h. This
has also been an opportunity to remove some cross references from
files that should not have depended on it.
In the end, this file should contain a protocol-agnostic accept()
code, which would initialize a session, task, etc... based on an
accept() from a lower layer. Right now there are still references
to TCP.
Some ACLs in the client ought to belong to proto_tcp, or protocols.
This file should only contain frontend-specific information and will
be renamed that way in next commit.
Some functions which act on generic buffer contents without being
tcp-specific were historically in proto_tcp.c. This concerns ACLs
and RDP cookies. Those have been moved away to more appropriate
locations. Ideally we should create some new files for each layer6
protocol parser. Let's do that later.
This ACL was missing in complex setups where the status of a remote site
has to be considered in switching decisions. Until there, using a server's
status in an ACL required to have a dedicated backend, which is a bit heavy
when multiple servers have to be monitored.
Using get_ip_from_hdr2() we can look for occurrence #X or #-X and
extract the IP it contains. This is typically designed for use with
the X-Forwarded-For header.
Using "usesrc hdr_ip(name,occ)", it becomes possible to use the IP address
found in <name>, and possibly specify occurrence number <occ>, as the
source to connect to a server. This is possible both in a server and in
a backend's source statement. This is typically used to use the source
IP previously set by a upstream proxy.
The transparent proxy address selection was set in the TCP connect function
which is not the most appropriate place since this function has limited
access to the amount of parameters which could produce a source address.
Instead, now we determine the source address in backend.c:connect_server(),
right after calling assign_server_address() and we assign this address in
the session and pass it to the TCP connect function. This cannot be performed
in assign_server_address() itself because in some cases (transparent mode,
dispatch mode or http_proxy mode), we assign the address somewhere else.
This change will open the ability to bind to addresses extracted from many
other criteria (eg: from a header).
Isidore Li reported an occasional segfault when using URL hashing, and
kindly provided backtraces and core files to help debugging.
The problem was triggered by reset connections before the URL was sent,
and was due to the same bug which was fixed by commit e45997661b
(connections were attempted in case of connection abort). While that
bug was already fixed, it appeared that the same segfault could be
triggered when URL hashing is configured in an HTTP backend when the
frontend runs in TCP mode and no URL was seen. It is totally abnormal
to try to hash a null URL, as well as to process any kind of L7 hashing
when a full request was not seen.
This additional fix now ensures that layer7 hashing is not performed on
incomplete requests.
This is used to force access to down servers for some requests. This
is useful when validating that a change on a server correctly works
before enabling the server again.
Some message pointers were not usable once the message reached the
HTTP_MSG_DONE state. This is the case for ->som which points to the
body because it is needed to parse chunks. There is one case where
we need the beginning of the message : server redirect. We have to
call http_get_path() after the request has been parsed. So we rely
on ->sol without counting on ->som. In order to achieve this, we're
making ->rq.{u,v} relative to the beginning of the message instead
of the buffer. That simplifies the code and makes it cleaner.
Preliminary tests show this is OK.
Supported informations, available via "tr/td title":
- cap: capabilities (proxy)
- mode: one of tcp, http or health (proxy)
- id: SNMP ID (proxy, socket, server)
- IP (socket, server)
- cookie (backend, server)
The rq.u field is relative to buf->data, not to msg->sol. We have
to subtract msg->som everywhere this error was made. Maybe it will
be simpler to have a pointer to the buffer in the message and find
appropriate data there.
When parsing body for URL parameters, we must not consider that
data are available from buf->data but from buf->data + msg->som.
This is not a problem right now but may become with keep-alive.
Now that the HTTP analyser will already have parsed the beginning
of the request body, we don't have to check for transfer-encoding
anymore since we have the current chunk size in hdr_content_len.
These ACLs are used to check the number of active connections on the
frontend, backend or in a backend's queue. The avg_queue returns the
average number of queued connections per server, and for this, divides
the total number of queued connections by the number of alive servers.
The dst_conn ACL has been slightly changed to more reflect its name and
original usage, which is to return the number of connections on the
destination address/port (the socket) and not the whole frontend.
Consistent hashing provides some interesting advantages over common
hashing. It avoids full redistribution in case of a server failure,
or when expanding the farm. This has a cost however, the hashing is
far from being perfect, as we associate a server to a request by
searching the server with the closest key in a tree. Since servers
appear multiple times based on their weights, it is recommended to
use weights larger than approximately 10-20 in order to smoothen
the distribution a bit.
In some cases, playing with weights will be the only solution to
make a server appear more often and increase chances of being picked,
so stats are very important with consistent hashing.
In order to indicate the type of hashing, use :
hash-type map-based (default, old one)
hash-type consistent (new one)
Consistent hashing can make sense in a cache farm, in order not
to redistribute everyone when a cache changes state. It could also
probably be used for long sessions such as terminal sessions, though
that has not be attempted yet.
More details on this method of hashing here :
http://www.spiteful.com/2008/03/17/programmers-toolbox-part-3-consistent-hashing/
There are a few remaining max values that need to move to counters.
Also, the counters are more often used than some config information,
so get them closer to the other useful struct members for better cache
efficiency.
The "static-rr" is just the old round-robin algorithm. It is still
in use when a hash algorithm is used and the data to hash is not
present, but it was impossible to configure it explicitly. This one
is cheaper in terms of CPU and supports unlimited numbers of servers,
so it makes sense to be able to use it.
LB algo macros were composed of the LB algo by itself without any indication
of the method to use to look up a server (the lb function itself). This
method was implied by the LB algo, which was not very convenient to add
more algorithms. Now we have several fields in the LB macros, some to
describe what to look for in the requests, some to describe how to transform
that (kind of algo) and some to describe what lookup function to use.
The next patch will make it possible to factor out some code for all algos
which rely on a map.
We need to remove hash map accesses out of backend.c if we want to
later support new hash methods. This patch separates the hash computation
method from the server lookup. It leaves the lookup function to lb_map.c
and calls it with the result of the hash.
It was becoming painful to have all the LB algos in backend.c.
Let's move them to their own files. A few hashing functions still
need be broken in two parts, one for the contents and one for the
map position.
There is no reason to inline functions which are used to grab a server
depending on an LB algo. They are large and used at several places.
Uninlining them saves 400 bytes of code.
Please consider the following patches. They are required to
compile haproxy-1.4-dev2 on FreeBSD.
Summary:
1) include <sys/types.h> before <netinet/tcp.h>
2) Use IPPROTO_TCP instead of SOL_TCP
(they are both defined as 6, TCP protocol number)
The connection establishment was completely handled by backend.c which
normally just handles LB algos. Since it's purely TCP, it must move to
proto_tcp.c. Also, instead of calling it directly, we now call it via
the stream interface, which will later help us unify session handling.
Andrew Azarov reported that haproxy-1.4-dev1 does not build
under FreeBSD 7.2 because SOL_TCP is not defined. So add a
check for its definition before using it. This only impacts
network optimisations anyway.
This Linux-specific option was never really used in production and
has since been superseded by new splicing options brought by recent
Linux kernels.
It caused several particular cases in the code because the kernel
would take care of the session without haproxy being able to do
anything on it, which became hard to handle in the new architecture.
Let's simply get rid of it now that there is a replacement available.
This patch adds support for hashing RDP cookies in order to
use them as a load-balancing key. The new "rdp-cookie(name)"
load-balancing metric has to be used for this. It is still
mandatory to wait for an RDP cookie in the frontend, otherwise
it will randomly work.
The splice code did not consider compatibility between both ends
of the connection. Now we set different capabilities on each
stream interface, depending on what the protocol can splice to/from.
Right now, only TCP is supported. Thanks to this, we're now able to
automatically detect when splice() is not implemented and automatically
disable it on one end instead of reporting errors to the upper layer.
This new option enables combining of request buffer data with
the initial ACK of an outgoing TCP connection. Doing so saves
one packet per connection which is quite noticeable on workloads
mostly consisting in small objects. The option is not enabled by
default.
Setting TCP_CORK on a socket before sending the last segment enables
automatic merging of this segment with the FIN from the shutdown()
call. Playing with TCP_CORK is not easy though as we have to track
the status of the TCP_NODELAY flag since both are mutually exclusive.
Doing so saves one more packet per session and offers about 5% more
performance.
There is no reason not to do it, so there is no associated option.
Some users are already hitting the 64k source port limit when
connecting to servers. The system usually maintains a list of
unused source ports, regardless of the source IP they're bound
to. So in order to go beyond the 64k concurrent connections, we
have to manage the source ip:port lists ourselves.
The solution consists in assigning a source port range to each
server and use a free port in that range when connecting to that
server, either for a proxied connection or for a health check.
The port must then be put back into the server's range when the
connection is closed.
This mechanism is used only when a port range is specified on
a server. It makes it possible to reach 64k connections per
server, possibly all from the same IP address. Right now it
should be more than enough even for huge deployments.
There is a patch made by me that allow for balancing on any http header
field.
[WT:
made minor changes:
- turned 'balance header name' into 'balance hdr(name)' to match more
closely the ACL syntax for easier future convergence
- renamed the proxy structure fields header_* => hh_*
- made it possible to use the domain name reduction to any header, not
only "host" since it makes sense to do it with other ones.
Otherwise patch looks good.
/WT]
The connect timeout was not properly detected due to the fact that
it was not correctly initialized. It must be set as the stream interface
timeout, not the buffer's write timeout.
These new ACLs match frontend session rate and backend session rate.
Examples are provided in the doc to explain how to use that in order
to limit abuse of service.
With this change, all frontends, backends, and servers maintain a session
counter and a timer to compute a session rate over the last second. This
value will be very useful because it varies instantly and can be used to
check thresholds. This value is also reported in the stats in a new "rate"
column.
Specifying "interface <name>" after the "source" statement allows
one to bind to a specific interface for proxy<->server traffic.
This makes it possible to use multiple links to reach multiple
servers, and to force traffic to pass via an interface different
from the one the system would have chosen based on the routing
table.
Setting "nosplice" in the global section will disable the use of TCP
splicing (both tcpsplice and linux 2.6 splice). The same will be
achieved using the "-dS" parameter on the command line.
In the buffers, the read limit used to leave some place for header
rewriting was set by a pointer to the end of the buffer. Not only
this required subtracts at every place in the code, but this will
also soon not be usable anymore when we want to support keepalive.
Let's replace this with a length limit, comparable to the buffer's
length. This has also sightly reduced the code size.
"option transparent" was set and checked on frontends only while it
is purely a backend thing as it replaces the "balance" mode. For this
reason, it did only work in "listen" sections. This change will then
not affect the rare users of this option.
I'm in the process of setting up one haproxy instance now, and I find
the following acl option useful. I'm not too sure why this option has
not been available before, but I find this useful for my own usage, so
I'm submitting this patch in the hope that it will be useful as well.
The basic idea is to be able to measure the available connection slots
still available (connection, + queue) - anything beyond that can be
redirected to a different backend. 'connslots' = number of available
server connection slots, + number of available server queue slots. In
the case where we encounter srv maxconn = 0, or srv maxqueue = 0 (in
which case we dont need to care about connslots) the value you get is
-1. Note also that this code does not take care of dynamic connections
at this point in time.
The reason why I'm using this new acl (as opposed to 'nbsrv') is that
'nbsrv' only measures servers that are actually *down*. Whereas this
other acl is more fine-grained, and looks into the number of conn
slots available as well.
The new function looks like the previous one except that it operates
at the stream interface level and assumes an already closed SI.
Also remove some old unused occurrences of srv_close_with_err().
It is quite hard to track when the current session has already been counted
or discounted from the server's total number of established sessions. For
this reason, we introduce a new session flag, SN_CURR_SESS, which indicates
if the current session is one of those reported by the server or not. It
simplifies session accounting and makes it far more robust. It also makes
it possible to perform a last-minute cleanup during session_free().
Right now, with this fix and a few more buffer transitions fixes, no session
were found to remain after a test.
The connection setup code has been refactored in order to
make it run only on low level (stream interface). Several
complicated functions have been removed from backend.c,
and we now have sess_update_stream_int() to manage
an assigned connection, sess_prepare_conn_req() to assign a
server to a connection request, perform_http_redirect() to
redirect instead of connecting to server, and return_srv_error()
to return connection error status messages.
The stream_interface status changes are checked before adjusting
buffer flags, so that the buffers can be informed about this lower
level update.
A new connection is initiated by changing si->state from SI_ST_INI
to SI_ST_REQ.
The code seems to work but is awfully dirty. Some functions need
to be moved, and the layering is not yet quite clear.
A lot of dead old code has simply been removed.
It was not practical to have QUEUE and TAR timers in buffers, as they caused
triggering of the timeout flags. Move them to the stream interface where they
belong.
As of now, a stream socket does not directly wake up the task
but it does contact the stream interface which itself knows the
task. This allows us to perform a few cleanups upon errors and
shutdowns, which reduces the number of calls to data_update()
from 8 per session to 2 per session, and make all the functions
called in the process_session() loop completely swappable.
Some improvements are required. We need to provide a shutw()
function on stream interfaces so that one side which closes
its read part on an empty buffer can propagate the close to
the remote side.
srv_state has been removed from HTTP state machines, and states
have been split in either TCP states or analyzers. For instance,
the TARPIT state has just become a simple analyzer.
New flags have been added to the struct buffer to compensate this.
The high-level stream processors sometimes need to force a disconnection
without touching a file-descriptor (eg: report an error). But if
they touched BF_SHUTW or BF_SHUTR, the file descriptor would not
be closed. Thus, the two SHUT?_NOW flags have been added so that
an application can request a forced close which the stream interface
will be forced to obey.
During this change, a new BF_HIJACK flag was added. It will
be used for data generation, eg during a stats dump. It
prevents the producer on a buffer from sending data into it.
BF_SHUTR_NOW /* the producer must shut down for reads ASAP */
BF_SHUTW_NOW /* the consumer must shut down for writes ASAP */
BF_HIJACK /* the producer is temporarily replaced */
BF_SHUTW_NOW has precedence over BF_HIJACK. BF_HIJACK has
precedence over BF_MAY_FORWARD (so that it does not need it).
New functions buffer_shutr_now(), buffer_shutw_now(), buffer_abort()
are provided to manipulate BF_SHUT* flags.
A new type "stream_interface" has been added to describe both
sides of a buffer. A stream interface has states and error
reporting. The session now has two stream interfaces (one per
side). Each buffer has stream_interface pointers to both
consumer and producer sides.
The server-side file descriptor has moved to its stream interface,
so that even the buffer has access to it.
process_srv() has been split into three parts :
- tcp_get_connection() obtains a connection to the server
- tcp_connection_failed() tests if a previously attempted
connection has succeeded or not.
- process_srv_data() only manages the data phase, and in
this sense should be roughly equivalent to process_cli.
Little code has been removed, and a lot of old code has been
left in comments for now.
In backend.c, we had an EV_FD_SET() called before fd_insert().
This is wrong because fd_insert updates maxfd which might be
used by some of the pollers during EV_FD_SET(), although this
is not currently the case.
It's a shame not to use buffer->wex for connection timeouts since by
definition it cannot be used till the connection is not established.
Using it instead of ->cex also makes the buffer processing more
symmetric.
The SV_STANALYZE state was installed on the server side but was really
meant to be processed with the rest of the request on the client side.
It suffered from several issues, mostly related to the way timeouts were
handled while waiting for data.
All known issues related to timeouts during a request - and specifically
a request involving body processing - have been raised and fixed. At this
point, the code is a bit dirty but works fine, so next steps might be
cleanups with an ability to come back to the current state in case of
trouble.
If an HTTP/0.9-like POST request is sent to haproxy while
configured with url_param + check_post, it will crash. The
reason is that the total buffer length was computed based
on req->total (which equals the number of bytes read) and
not req->l (number of bytes in the buffer), thus leading
to wrong size calculations when calling memchr().
The affected code does not look like it could have been
exploited to run arbitrary code, only reads were performed
at wrong locations.
All currently known ACL verbs have been assigned a type which makes
it possible to detect inconsistencies, such as response values used
in request rules.
It should be stated as a rule that a C file should never
include types/xxx.h when proto/xxx.h exists, as it gives
less exposure to declaration conflicts (one of which was
caught and fixed here) and it complicates the file headers
for nothing.
Only types/global.h, types/capture.h and types/polling.h
have been found to be valid includes from C files.
This is the first attempt at moving all internal parts from
using struct timeval to integer ticks. Those provides simpler
and faster code due to simplified operations, and this change
also saved about 64 bytes per session.
A new header file has been added : include/common/ticks.h.
It is possible that some functions should finally not be inlined
because they're used quite a lot (eg: tick_first, tick_add_ifset
and tick_is_expired). More measurements are required in order to
decide whether this is interesting or not.
Some function and variable names are still subject to change for
a better overall logics.
The dequeuing logic was completely wrong. First, a task was assigned
to all servers to process the queue, but this task was never scheduled
and was only woken up on session free. Second, there was no reservation
of server entries when a task was assigned a server. This means that
as long as the task was not connected to the server, its presence was
not accounted for. This was causing trouble when detecting whether or
not a server had reached maxconn. Third, during a redispatch, a session
could lose its place at the server's and get blocked because another
session at the same moment would have stolen the entry. Fourth, the
redispatch option did not work when maxqueue was reached for a server,
and it was not possible to do so without indefinitely hanging a session.
The root cause of all those problems was the lack of pre-reservation of
connections at the server's, and the lack of tracking of servers during
a redispatch. Everything relied on combinations of flags which could
appear similarly in quite distinct situations.
This patch is a major rework but there was no other solution, as the
internal logic was deeply flawed. The resulting code is cleaner, more
understandable, uses less magics and is overall more robust.
As an added bonus, "option redispatch" now works when maxqueue has
been reached on a server.
This patch adds two optional arguments "len" and "depth" to
"balance uri". They are used to limit the length in characters
of the analysis, as well as the number of directory components
it applies to.
This patch extends the "url_param" load balancing method by introducing
the "check_post" option. Using this option enables analysis of the beginning
of POST requests to search for the specified URL parameter.
The patch also fixes a few minor typos in comments that were discovered
during code review.
The new "leastconn" LB algorithm selects the server which has the
least established or pending connections. The weights are considered,
so that a server with a weight of 20 will get twice as many connections
as the server with a weight of 10.
The algorithm respects the minconn/maxconn settings, as well as the
slowstart since it is a dynamic algorithm. It also correctly supports
backup servers (one and all).
It is generally suited for protocols with long sessions (such as remote
terminals and databases), as it will ensure that upon restart, a server
with no connection will take all new ones until its load is balanced
with others.
A test configuration has been added in order to ease regression testing.
Commit 3168223a7b broke option
"allbackups" in roundrobin mode due to an erroneous structure
member replacement in backend.c. The PR_O_USE_ALL_BK flag was
not tested in the right member anymore.
This bug uncoverred another one, by which all backup servers would
be used whatever the option's value, if all of them had been seen
as simultaneously failed at one moment.
This patch fixes the two stupid errors. Correctness has been tested
using the test-fwrr.cfg config example.
When haproxy decides that session needs to be redispatched it chose a server,
but there is no guarantee for it to be a different one. So, it often
happens that selected server is exactly the same that it was previously, so
a client ends up with a 503 error anyway, especially when one sever has
much bigger weight than others.
Changes from the previous version:
- drop stupid and unnecessary SN_DIRECT changes
- assign_server(): use srvtoavoid to keep the old server and clear s->srv
so SRV_STATUS_NOSRV guarantees that t->srv == NULL (again)
and get_server_rr_with_conns has chances to work (previously
we were passing a NULL here)
- srv_redispatch_connect(): remove t->srv->cum_sess and t->srv->failed_conns
incrementing as t->srv was guaranteed to be NULL
- add avoididx to get_server_rr_with_conns. I hope I correctly understand this code.
- fix http_flush_cookie_flags() and move it to assign_server_and_queue()
directly. The code here was supposed to set CK_DOWN and clear CK_VALID,
but: (TX_CK_VALID | TX_CK_DOWN) == TX_CK_VALID == TX_CK_MASK so:
if ((txn->flags & TX_CK_MASK) == TX_CK_VALID)
txn->flags ^= (TX_CK_VALID | TX_CK_DOWN);
was really a:
if ((txn->flags & TX_CK_MASK) == TX_CK_VALID)
txn->flags &= TX_CK_VALID
Now haproxy logs "--DI" after redispatching connection.
- defer srv->redispatches++ and s->be->redispatches++ so there
are called only if a conenction was redispatched, not only
supposed to.
- don't increment lbconn if redispatcher selected the same sarver
- don't count unsuccessfully redispatched connections as redispatched
connections
- don't count redispatched connections as errors, so:
- the number of connections effectively served by a server is:
srv->cum_sess - srv->failed_conns - srv->retries - srv->redispatches
and
SUM(servers->failed_conns) == be->failed_conns
- requires the "Don't increment server connections too much + fix retries" patch
- needs little more testing and probably some discussion so reverting to the RFC state
Tests #1:
retries 4
redispatch
i) 1 server(s): b (wght=1, down)
b) sessions=5, lbtot=1, err_conn=1, retr=4, redis=0
-> request failed
ii) server(s): b (wght=1, down), u (wght=1, down)
b) sessions=4, lbtot=1, err_conn=0, retr=3, redis=1
u) sessions=1, lbtot=1, err_conn=1, retr=0, redis=0
-> request FAILED
iii) 2 server(s): b (wght=1, down), u (wght=1, up)
b) sessions=4, lbtot=1, err_conn=0, retr=3, redis=1
u) sessions=1, lbtot=1, err_conn=0, retr=0, redis=0
-> request OK
iv) 2 server(s): b (wght=100, down), u (wght=1, up)
b) sessions=4, lbtot=1, err_conn=0, retr=3, redis=1
u) sessions=1, lbtot=1, err_conn=0, retr=0, redis=0
-> request OK
v) 1 server(s): b (down for first 4 SYNS)
b) sessions=5, lbtot=1, err_conn=0, retr=4, redis=0
-> request OK
Tests #2:
retries 4
i) 1 server(s): b (down)
b) sessions=5, lbtot=1, err_conn=1, retr=4, redis=0
-> request FAILED
Commit 98937b8757 while fixing
one bug introduced another one. With "retries 4" and
"option redispatch" haproxy tries to connect 4 times to
one server server and 1 time to a second one. However
logs showed 5 connections to the first server (the
last one was counted twice) and 2 to the second.
This patch also fixes srv->retries and be->retries increments.
Now I get: 3 retries and 1 error in a first server (4 cum_sess)
and 1 error in a second server (1 cum_sess) with:
retries 4
option redispatch
and: 4 retries and 1 error (5 cum_sess) with:
retries 4
So, the number of connections effectively served by a server is:
srv->cum_sess - srv->failed_conns - srv->retries
GCC4 is stupid (unbelievable news!).
When some code uses __builtin_expect(x != 0, 1), it really performs
the check of x != 0 then tests that the result is not zero! This is
a double check when only one was expected. Some performance drops
of 10% in the HTTP parser code have been observed due to this bug.
GCC 3.4 is fine though.
A solution consists in expecting that the tested value is 1. In
this case, it emits the correct code, but it's still not optimal
it seems. Finally the best solution is to ignore likely() and to
pray for the compiler to emit correct code. However, we still have
to fix unlikely() to remove the test there too, and to fix all
code which passed pointers overthere to pass integers instead.
Now when a server has "redir <prefix>" on its config line, any HEAD or GET
request addressing it will lead to a 302 with Location set to "<prefix>"
immediately followed by the relative URI of the incoming request. This makes
it very easy to send redirect to browsers to check remote static servers, as
well as to provide redirection for remote sites when the local one is down.
There's no point trying to check original dest addr with only one
method when doing transparent proxy as in full transparent mode,
the real destination address is required. Let's copy the one from
the frontend.
The source address selection for health checks did not consider
the new transparent proxy method. Rely on the same unified function
as the other connect() calls.
This patch also fixes a bug by which the proxy's source address was
ignored if cttproxy was used.
Balabit's TPROXY version 4 which replaces CTTPROXY provides a similar
API to the previous proxy, but relies on IP_FREEBIND instead of
IP_TRANSPARENT. Let's add it.
Using some Linux kernel patches which add the IP_TRANSPARENT
SOL_IP option , it is possible to bind to a non-local address
on without having resort to any sort of NAT, thus causing no
performance degradation.
This is by far faster and cleaner than the previous CTTPROXY
method. The code has been slightly changed in order to remain
compatible with CTTPROXY as a fallback for the new method when
it does not work.
It is not needed anymore to specify the outgoing source address
for connect, it can remain 0.0.0.0.
