This changes all main uses of cs->endp->flags to the sc_ep_*() equivalent
by applying coccinelle script cs_endp_flags.cocci.
Note: 143 locations were touched, manually reviewed and found to be OK,
except a single one that was adjusted in cs_reset_endp() where the flags
are read and filtered to be used as-is and not as a boolean, hence was
replaced with sc_ep_get() & $FLAGS.
The script was applied with all includes:
spatch --in-place --recursive-includes -I include --sp-file $script $files
Even if `unique_id` and `s->unique_id` are identical it is a bit odd to
`isttest()` `unique_id` and then use `s->unique_id` in the call to `http_add_header()`.
This "issue" was introduced in a17e66289c08a5bfadc1bb5b5f2c618c9299fe1b,
because before that commit the function returned the length of the ID, as it
was not an ist.
It is just a helper function that call the .init applet callback function,
if it exists. This will simplify a bit the init stage when a new applet is
started. For now, this callback function is only used when a new service is
started.
The session created for frontend applets is now totally owns by the
corresponding appctx. It means the appctx is now responsible to release
it. This removes the hack in stream_free() about frontend applets to be sure
to release the session.
This one is the pointer to the conn_stream which is always in the
endpoint that is always present in the appctx, thus it's not needed.
This patch removes it and replaces it with appctx_cs() instead. A
few occurences that were using __cs_strm(appctx->owner) were moved
directly to appctx_strm() which does the equivalent.
This one has been misused for a while as well, it's time to deprecate it
since we don't use it anymore. It will be removed in 2.7 and for now is
only marked as deprecated. Since we need to guarantee that it's zeroed
before starting any applet or CLI command, it was moved into an anonymous
union where its sibling is not marked as deprecated so that we can
continue to initialize it without triggering a warning.
If you found this commit after a bisect session you initiated to figure
why you got some build warnings and don't know what to do, have a look
at the code that deals with the "show fd", "show sess" or "show servers"
commands, as it's supposed to be self-explanatory about the tiny changes
to apply to your code to port it. If you find APPLET_MAX_SVCCTX to be
too small for your use case, either kindly ask for a tiny extension
(and try to get your code merged), or just use a pool.
The state was a constant, let's remove what remains of the switch/case.
The code from the "case" statement was only reindented as can be checked
with "git show -b".
This state is only an alias for "thr >= global.nbthread" which is the
sole condition that indicates the end and reaches it. Let's just drop
this state. There's only the STATE_LIST that's left.
This state was only used to preset the list element. Now that we can
guarantee that the context can be properly preset during the parsing
we don't need this state anymore. The first pointer has to be set to
point to the first stream during the initial call which is detected
by the pointer not yet being set (null). Thanks to this we can also
remove one state check on the abort path.
This makes use of the generic command context allocation so that the
appctx doesn't have to declare a specific one anymore. The context is
created during parsing.
There were plenty of leftovers from old code that were never removed
and that are not needed at all since these files do not use any
definition depending on fcntl.h, let's drop them.
A conn-stream is never detached from an endpoint or an application alone,
except on a reset. Thus, to avoid any error, these functions are now
private. And cs_destroy() function is added to destroy a conn-stream. This
function is called when a stream is released, on the front and back
conn-streams, and when a health-check is finished.
When a client abort is detected with the server conn-stream in CS_ST_INI
state, there is no reason to detach the endpoing because we know there is no
endpoint attached to this conn-stream. This patch depends on the commit
"BUG/MEDIUM: conn-stream: Set back CS to RDY state when the appctx is
created".
Since the recent changes about the conn-streams, the stream dump in "show
sess all" command is a bit mangled. front and back conn-stream are now
properly displayed (csf and csb). In addition, when there is no backend
endpoint, "APPCTX" was always reported. Now, "NONE" is reported in this
case.
It is 2.6-specific. No backport needed.
Github issue #472 reports a problem with short client connections making
stick-table entries disappear. The problem is in fact totally different
and stems at the connection establishment step.
What happens is that the stick-table there has a single entry. The
"stick-on" directive is forced to purge an existing entry before being
able to create a new one. The new entry will be committed during the
call to process_store_rules() on the response path.
But if the client sends the FIN immediately after the connection is set
up (e.g. using nc -z) then the SHUTR is received and will cancel the
connection setup just after it starts. This cancellation will induce a
call to cs_shutw() which will in turn leave the server-side state in
ST_DIS. This transition from ST_CON to ST_DIS doesn't belong to the
list of handled transition during the connection setup so it will be
handled right after on the regular path, causing the connection to be
closed. Because of this, we never pass through back_establish() and
the backend's analysers are never set on the response channel, which
is why process_store_rules() is not called and the stick-tables entry
never committed.
The comment above the code that causes this transition clearly says
that the function is to be used after the connection is established
with the server, but there's no such protection, and we always have
the AUTO_CLOSE flag there (but there's hardly any available condition
to eliminate it).
This patch adds a test for the connection not being in ST_CON or for
option abortonclose being set. It's sufficient to do the job and it
should not cause issues.
One concern was that the transition could happen during cs_recv()
after the connection switches from CON to RDY then the read0 would
be taken into account and would cause DIS to appear, which is not
handled either. But that cannot happen because cs_recv() doesn't do
anything until it's in ST_EST state, hence the read0() cannot be
called from CON/RDY. Thus the transition from CON to DIS is only
possible in back_handle_st_con() and back_handle_st_rdy() both of
which are called when dealing with the transition already, or when
abortonclose is set and the client aborts before connect() succeeds.
It's possible that some further improvements could be made to detect
this specific transition but it doesn't seem like anything would have
to be added.
This issue was first reported on 2.1. The abortonclose area is very
sensitive so it would be wise to backport slowly, and probably no
further than 2.4.
process_stream() and all associated functions now manipulate conn-streams.
stream-interfaces are no longer used. In addition, function to dump info
about a stream no longer print info about stream-interfaces.
Remaining flags and associated functions are move in the conn-stream
scope. These flags are added on the endpoint and not the conn-stream
itself. This way it will be possible to get them from the mux or the
applet. The functions to get or set these flags are renamed accordingly with
the "cs_" prefix and updated to manipualte a conn-stream instead of a
stream-interface.
si_update_both() is renamed stream_update_both_cs() and moved in stream.c.
The function is slightly changed to manipulate the stream instead the front
and back conn-streams.
si_update_rx(), si_update_tx() and si_update() are renamed cs_update_rx(),
cs_upate_tx() and cs_update() and updated to manipulate a conn-stream
instead of a stream-interface.
si_register_applet() and si_applet_release() are renamed
cs_register_applet() and cs_applet_release() and now manipulate a
conn-stream instead of a stream-inteface.
si_shutr(), si_shutw(), si_chk_rcv() and si_chk_snd() are moved in the
conn-stream scope and renamed, respectively, cs_shutr(), cs_shutw(),
cs_chk_rcv(), cs_chk_snd() and manipulate a conn-stream instead of a
stream-interface.
wait_event structure is moved in the conn-stream. The tasklet is only
created if the conn-stream is attached to a mux and released when the mux is
detached. This implies a subtle change. In stream_int_chk_rcv() function,
the wakeup of the tasklet was removed because there is no longer tasklet at
this stage (stream_int_chk_rcv() is a callback function of si_embedded_ops).
si_retnclose() is used to send a reply to a client before closing. There is
no use on the server side, in spite of the function is generic. Thus, it is
renamed stream_retnclose() and moved into the stream scope. The function now
handle a stream and explicitly send a message to the client.
The stream-interface state (SI_ST_*) is now in the conn-stream. It is a
mechanical replacement for now. Nothing special. SI_ST_* and SI_SB_* were
renamed accordingly. Utils functions to manipulate these infos were moved
under the conn-stream scope.
But it could be good to keep in mind that this part should be
reworked. Indeed, at the CS level, we only need to know if it is ready to
receive or to send. The state of conn-stream from INI to EST is only used on
the server side. The client CS is immediately set to EST. Thus current
SI_ST_* states should probably be moved to the stream to reflect the server
connection state during the establishment stage.
Only the server side is concerned by the stream-interface error type. It is
useless to have an err_type field on the client side. So, it is now move to
the stream. SI_ET_* are renames STRM_ET_* and moved in stream-t.h header
file.
The previous connection state on the client side was only used for debugging
purpose to report client close. But this may be handled when the client
stream-interface is switched from SI_ST_DIS to SI_ST_CLO.
So, there only remains the previous connection state on the server side that
is used by the stream, in process_stream(), to be able to set the correct
termination flags. Thus, instead of keeping this info in the
stream-interface for only one side, the info is now stored in the stream
itself.
Flag to consider a stream as indepenent is now handled at the conn-stream
level. Thus SI_FL_INDEP_STR stream-int flag is replaced by CS_FL_INDEP_STR
conn-stream flags.
Flag to not wake the stream up on I/O is now handled at the conn-stream
level. Thus SI_FL_DONT_WAKE stream-int flag is replaced by CS_FL_DONT_WAKE
conn-stream flags.
Flags to disable lingering and half-close are now handled at the conn-stream
level. Thus SI_FL_NOLINGER and SI_FL_NOHALF stream-int flags are replaced by
CS_FL_NOLINGER and CS_FL_NOHALF conn-stream flags.
Instead of relying on the conn-stream error, via CS_FL_ERR flags, we now
directly use the error at the endpoint level with the flag CS_EP_ERROR. It
should be safe to do so. But we must be careful because it is still possible
that an error is processed too early. Anyway, a conn-stream has always a
valid endpoint, maybe detached from any endpoint, but valid.
SI_FL_ERR is removed and replaced by CS_FL_ERROR. It is a transient patch
because the idea is to rely on the endpoint to handle errors at this
level. But if for any reason it is not possible, the stream-interface flags
will still be replaced.
The expiration date in the stream-interface was only used on the server side
to set the connect, queue or turn-around timeout. It was checked on the
frontend stream-interface, but never used concretely. So it was removed and
replaced by a connect expiration date in the stream itself. Thus, SI_FL_EXP
flag in stream-interfaces is replaced by a stream flag, SF_CONN_EXP.
The conn_retries counter was set to the max value and decremented at each
connection retry. Thus the counter reflected the number of retries left and
not the real number of retries. All calculations of redispatch or reporting
of number of retries experienced were made using subtracts from the
configured retries, which was complicated and didn't bring any benefit.
Now, this counter is set to 0 and incremented at each retry. We know we've
reached the maximum allowed connection retries by comparing it to the
configured value. In all other cases, we directly use the counter.
This patch should address the feature request #1608.
The conn_retries counter may be moved into the stream structure. It only
concerns the connection establishment. The frontend stream-interface does not
use it. So it is a logical change.
The L7 retries only concerns the stream when a server connection is
established. Thus instead of storing the L7 buffer into the
stream-interface, it may be moved to the stream. And because it is only
available for HTTP streams, it may be moved in the HTTP transaction.
Associated flags are also moved into the HTTP transaction.
At many places, we now use the new CS functions to get a stream or a channel
from a conn-stream instead of using the stream-interface API. It is the
first step to reduce the scope of the stream-interfaces. The main change
here is about the applet I/O callback functions. Before the refactoring, the
stream-interface was the appctx owner. Thus, it was heavily used. Now, as
far as possible,the conn-stream is used. Of course, it remains many calls to
the stream-interface API.
CS_FL_ISBACK is a new flag, set on backend conn-streams. We must just be
careful to preserve this flag when the endpoint is detached from the
conn-stream.
It is a transient commit to prepare next changes. Now, when a conn-stream is
created from an applet or a multiplexer, an endpoint is always provided. In
addition, the API to create a conn-stream was specialized to have one
function per type.
The next step will be to share the endpoint structure.
It is a transient commit to prepare next changes. It is possible to pass a
pre-allocated endpoint to create a new conn-stream. If it is NULL, a new
endpoint is created, otherwise the existing one is used. There no more
change at the conn-stream level.
In the applets, all conn-stream are created with no pre-allocated
endpoint. But for multiplexers, an endpoint is systematically created before
creating the conn-stream.
Some CS flags, only related to the endpoint, are moved into the endpoint
struct. More will probably moved later. Those ones are not critical. So it
is pretty safe to move them now and this will ease next changes.
Group the endpoint target of a conn-stream, its context and the associated
flags in a dedicated structure in the conn-stream. It is not inlined in the
conn-stream structure. There is a dedicated pool.
For now, there is no complexity. It is just an indirection to get the
endpoint or its context. But the purpose of this structure is to be able to
share a refcounted context between the mux and the conn-stream. This way, it
will be possible to preserve it when the mux is detached from the
conn-stream.
This change is only significant for the multiplexer part. For the applets,
the context and the endpoint are the same. Thus, there is no much change. For
the multiplexer part, the connection was used to set the conn-stream
endpoint and the mux's stream was the context. But it is a bit strange
because once a mux is installed, it takes over the connection. In a
wonderful world, the connection should be totally hidden behind the mux. The
stream-interface and, in a lesser extent, the stream, still access the
connection because that was inherited from the pre-multiplexer era.
Now, the conn-stream endpoint is the mux's stream (an opaque entity for the
conn-stream) and the connection is the context. Dedicated functions have
been added to attached an applet or a mux to a conn-stream.
