Generate a list of the previous filters when updating a certificate
which use filters in crt-list. Then pass this list to the function
generating the sni_ctx during the commit.
This feature allows the update of the crt-list certificates which uses
the filters with "set ssl cert".
This function could be probably replaced by creating a new
ckch_inst_new_load_store() function which take the previous sni_ctx list as
an argument instead of the char **sni_filter, avoiding the
allocation/copy during runtime for each filter. But since are still
handling the multi-cert bundles, it's better this way to avoid code
duplication.
It's only available for bind line. "ca-verify-file" allows to separate
CA certificates from "ca-file". CA names sent in server hello message is
only compute from "ca-file". Typically, "ca-file" must be defined with
intermediate certificates and "ca-verify-file" with certificates to
ending the chain, like root CA.
Fix issue #404.
We always set them both, which makes sense since errors at the FD level
indicate a terminal condition for the socket that cannot be recovered.
Usually this is detected via a write error, but sometimes such an error
may asynchronously be reported on the read side. Let's simplify this
using only the write bit and calling it RW since it's used like this
everywhere, and leave the R bit spare for future use.
There's no point in trying to be too generic for these flags as the
read and write sides will soon differ a bit. Better explicitly define
the flags for each direction without trying to be direction-agnostic.
this clarifies the code and removes some defines.
This was used only by fd_recv_state() and fd_send_state(), both of
which are unused. This will not work anymore once recv and send flags
start to differ, so let's remove this.
commit c87e46881 ("MINOR: http-rules: Add a flag on redirect rules to know the
rule direction") introduced a new flag for redirect rules, but its value has
bits in common with REDIRECT_FLAG_DROP_QS, which makes us enter this code path
in http_apply_redirect_rule(), which will then drop the query string.
To fix this, just give REDIRECT_FLAG_FROM_REQ its own unique value.
This must be backported where c87e468816 is backported.
This should fix issue 521.
Move the cert_issuer_tree outside the global_ssl structure since it's
not a configuration variable. And move the declaration of the
issuer_chain structure in types/ssl_sock.h
This used to be a minor optimization on ix86 where registers are scarce
and the calling convention not very efficient, but this platform is not
relevant enough anymore to warrant all this dirt in the code for the sake
of saving 1 or 2% of performance. Modern platforms don't use this at all
since their calling convention already defaults to using several registers
so better get rid of this once for all.
This flag is currently supported by raw_sock to perform a single recv()
attempt and avoid subscribing. Typically on the request and response
paths with keep-alive, with short messages we know that it's very likely
that the first message is enough.
Historically we used to require that the connections held the desired
polling states for the data layer and the socket layer. Then with muxes
these were more or less merged into the transport layer, and now it
happens that with all transport layers having their own state, the
"transport layer state" as we have it in the connection (XPRT_RD_ENA,
XPRT_WR_ENA) is only an exact copy of the undelying file descriptor
state, but with a delay. All of this is causing some difficulties at
many places in the code because there are still some locations which
use the conn_want_* API to remain clean and only rely on connection,
and count on a later collection call to conn_cond_update_polling(),
while others need an immediate action and directly use the FD updates.
Since our updates are now much cheaper, most of them being only an
atomic test-and-set operation, and since our I/O callbacks are deferred,
there's no benefit anymore in trying to "cache" the transient state
change in the connection flags hoping to cancel them before they
become an FD event. Better make such calls transparent indirections
to the FD layer instead and get rid of the deferred operations which
needlessly complicate the logic inside.
This removes flags CO_FL_XPRT_{RD,WR}_ENA and CO_FL_WILL_UPDATE.
A number of functions related to polling updates were either greatly
simplified or removed.
Two places were using CO_FL_XPRT_WR_ENA as a hint to know if more data
were expected to be sent after a PROXY protocol or SOCKSv4 header. These
ones were simply replaced with a check on the subscription which is
where we ought to get the autoritative information from.
Now the __conn_xprt_want_* and their conn_xprt_want_* counterparts
are the same. conn_stop_polling() and conn_xprt_stop_both() are the
same as well. conn_cond_update_polling() only causes errors to stop
polling. It also becomes way more obvious that muxes should not at
all employ conn_xprt_{want|stop}_{recv,send}(), and that the call
to __conn_xprt_stop_recv() in case a mux failed to allocate a buffer
is inappropriate, it ought to unsubscribe from reads instead. All of
this definitely requires a serious cleanup.
When an action successfully finishes, the action return code (ACT_RET_*) is now
retrieve on the stack, ff the first element is an integer. In addition, in
hlua_txn_done(), the value ACT_RET_DONE is pushed on the stack before
exiting. Thus, when a script uses this function, the corresponding action still
finishes with the good code. Thanks to this change, the flag HLUA_STOP is now
useless. So it has been removed.
It is a mandatory step to allow a lua action to return any action return code.
It is not possible anymore to alter the HTTP parser state from lua sample
fetches or lua actions. So there is no reason to still check for the parser
state consistency.
It is now possible to append extra headers to the generated responses by HTTP
return actions, while it is not based on an errorfile. For return actions based
on errorfiles, these extra headers are ignored. To define an extra header, a
"hdr" argument must be used with a name and a value. The value is a log-format
string. For instance:
http-request status 200 hdr "x-src" "%[src]" hdr "x-dst" "%[dst]"
Thanks to this new action, it is now possible to return any responses from
HAProxy, with any status code, based on an errorfile, a file or a string. Unlike
the other internal messages generated by HAProxy, these ones are not interpreted
as errors. And it is not necessary to use a file containing a full HTTP
response, although it is still possible. In addition, using a log-format string
or a log-format file, it is possible to have responses with a dynamic
content. This action can be used on the request path or the response path. The
only constraint is to have a responses smaller than a buffer. And to avoid any
warning the buffer space reserved to the headers rewritting should also be free.
When a response is returned with a file or a string as payload, it only contains
the content-length header and the content-type header, if applicable. Here are
examples:
http-request return content-type image/x-icon file /var/www/favicon.ico \
if { path /favicon.ico }
http-request return status 403 content-type text/plain \
lf-string "Access denied. IP %[src] is blacklisted." \
if { src -f /etc/haproxy/blacklist.lst }
This patch introduces the 'http-after-response' rules. These rules are evaluated
at the end of the response analysis, just before the data forwarding, on ALL
HTTP responses, the server ones but also all responses generated by
HAProxy. Thanks to this ruleset, it is now possible for instance to add some
headers to the responses generated by the stats applet. Following actions are
supported :
* allow
* add-header
* del-header
* replace-header
* replace-value
* set-header
* set-status
* set-var
* strict-mode
* unset-var
HTTP redirect rules can be evaluated on the request or the response path. So
when a redirect rule is evaluated, it is important to have this information
because some specific processing may be performed depending on the direction. So
the REDIRECT_FLAG_FROM_REQ flag has been added. It is set when applicable on the
redirect rule during the parsing.
This patch is mandatory to fix a bug on redirect rule. It must be backported to
all stable versions.
<.arg.dns.dns_opts> field in the act_rule structure is now dynamically allocated
when a do-resolve rule is parsed. This drastically reduces the structure size.
Commit a17664d829 ("MEDIUM: tasks: automatically requeue into the bulk
queue an already running tasklet") tried to inflict a penalty to
self-requeuing tasks/tasklets which correspond to those involved in
large, high-latency data transfers, for the benefit of all other
processing which requires a low latency. However, it turns out that
while it ought to do this on a case-by-case basis, basing itself on
the RUNNING flag isn't accurate because this flag doesn't leave for
tasklets, so we'd rather need a distinct flag to tag such tasklets.
This commit introduces TASK_SELF_WAKING to mark tasklets acting like
this. For now it's still set when TASK_RUNNING is present but this
will have to change. The flag is kept across wakeups.
We used to mix high latency tasks and low latency tasklets in the same
list, and to even refill bulk tasklets there, causing some unfairness
in certain situations (e.g. poll-less transfers between many connections
saturating the machine with similarly-sized in and out network interfaces).
This patch changes the mechanism to split the load into 3 lists depending
on the task/tasklet's desired classes :
- URGENT: this is mainly for tasklets used as deferred callbacks
- NORMAL: this is for regular tasks
- BULK: this is for bulk tasks/tasklets
Arbitrary ratios of max_processed are picked from each of these lists in
turn, with the ability to complete in one list from what was not picked
in the previous one. After some quick tests, the following setup gave
apparently good results both for raw TCP with splicing and for H2-to-H1
request rate:
- 0 to 75% for urgent
- 12 to 50% for normal
- 12 to what remains for bulk
Bulk is not used yet.
As mentioned in commit c192b0ab95 ("MEDIUM: connection: remove
CO_FL_CONNECTED and only rely on CO_FL_WAIT_*"), there is a lack of
consistency on which flags are checked among L4/L6/HANDSHAKE depending
on the code areas. A number of sample fetch functions only check for
L4L6 to report MAY_CHANGE, some places only check for HANDSHAKE and
many check both L4L6 and HANDSHAKE.
This patch starts to make all of this more consistent by introducing a
new mask CO_FL_WAIT_XPRT which is the union of L4/L6/HANDSHAKE and
reports whether the transport layer is ready or not.
All inconsistent call places were updated to rely on this one each time
the goal was to check for the readiness of the transport layer.
Most places continue to check CO_FL_HANDSHAKE while in fact they should
check CO_FL_HANDSHAKE_NOSSL, which contains all handshakes but the one
dedicated to SSL renegotiation. In fact the SSL layer should be the
only one checking CO_FL_SSL_WAIT_HS, so as to avoid processing data
when a renegotiation is in progress, but other ones randomly include it
without knowing. And ideally it should even be an internal flag that's
not exposed in the connection.
This patch takes CO_FL_SSL_WAIT_HS out of CO_FL_HANDSHAKE, uses this flag
consistently all over the code, and gets rid of CO_FL_HANDSHAKE_NOSSL.
In order to limit the confusion that has accumulated over time, the
CO_FL_SSL_WAIT_HS flag which indicates an ongoing SSL handshake,
possibly used by a renegotiation was moved after the other ones.
Commit 477902bd2e ("MEDIUM: connections: Get ride of the xprt_done
callback.") broke the master CLI for a very obscure reason. It happens
that short requests immediately terminated by a shutdown are properly
received, CS_FL_EOS is correctly set, but in si_cs_recv(), we refrain
from setting CF_SHUTR on the channel because CO_FL_CONNECTED was not
yet set on the connection since we've not passed again through
conn_fd_handler() and it was not done in conn_complete_session(). While
commit a8a415d31a ("BUG/MEDIUM: connections: Set CO_FL_CONNECTED in
conn_complete_session()") fixed the issue, such accident may happen
again as the root cause is deeper and actually comes down to the fact
that CO_FL_CONNECTED is lazily set at various check points in the code
but not every time we drop one wait bit. It is not the first time we
face this situation.
Originally this flag was used to detect the transition between WAIT_*
and CONNECTED in order to call ->wake() from the FD handler. But since
at least 1.8-dev1 with commit 7bf3fa3c23 ("BUG/MAJOR: connection: update
CO_FL_CONNECTED before calling the data layer"), CO_FL_CONNECTED is
always synchronized against the two others before being checked. Moreover,
with the I/Os moved to tasklets, the decision to call the ->wake() function
is performed after the I/Os in si_cs_process() and equivalent, which don't
care about this transition either.
So in essence, checking for CO_FL_CONNECTED has become a lazy wait to
check for (CO_FL_WAIT_L4_CONN | CO_FL_WAIT_L6_CONN), but that always
relies on someone else having synchronized it.
This patch addresses it once for all by killing this flag and only checking
the two others (for which a composite mask CO_FL_WAIT_L4L6 was added). This
revealed a number of inconsistencies that were purposely not addressed here
for the sake of bisectability:
- while most places do check both L4+L6 and HANDSHAKE at the same time,
some places like assign_server() or back_handle_st_con() and a few
sample fetches looking for proxy protocol do check for L4+L6 but
don't care about HANDSHAKE ; these ones will probably fail on TCP
request session rules if the handshake is not complete.
- some handshake handlers do validate that a connection is established
at L4 but didn't clear CO_FL_WAIT_L4_CONN
- the ->ctl method of mux_fcgi, mux_pt and mux_h1 only checks for L4+L6
before declaring the mux ready while the snd_buf function also checks
for the handshake's completion. Likely the former should validate the
handshake as well and we should get rid of these extra tests in snd_buf.
- raw_sock_from_buf() would directly set CO_FL_CONNECTED and would only
later clear CO_FL_WAIT_L4_CONN.
- xprt_handshake would set CO_FL_CONNECTED itself without actually
clearing CO_FL_WAIT_L4_CONN, which could apparently happen only if
waiting for a pure Rx handshake.
- most places in ssl_sock that were checking CO_FL_CONNECTED don't need
to include the L4 check as an L6 check is enough to decide whether to
wait for more info or not.
It also becomes obvious when reading the test in si_cs_recv() that caused
the failure mentioned above that once converted it doesn't make any sense
anymore: having CS_FL_EOS set while still waiting for L4 and L6 to complete
cannot happen since for CS_FL_EOS to be set, the other ones must have been
validated.
Some of these parts will still deserve further cleanup, and some of the
observations above may induce some backports of potential bug fixes once
totally analyzed in their context. The risk of breaking existing stuff
is too high to blindly backport everything.
The xprt_done_cb callback was used to defer some connection initialization
until we're connected and the handshake are done. As it mostly consists of
creating the mux, instead of using the callback, introduce a conn_create_mux()
function, that will just call conn_complete_session() for frontend, and
create the mux for backend.
In h2_wake(), make sure we call the wake method of the stream_interface,
as we no longer wakeup the stream task.
For complex stick tables with many entries/columns, it can be beneficial
to filter using multiple criteria. The maximum number of filter entries
can be controlled by defining STKTABLE_FILTER_LEN during build time.
This patch can be backported to older releases.
It was inherited from acl_time, introduced in 1.3.10 by commit a84d374367
("[MAJOR] new framework for generic ACL support") and was never ever used.
Let's simply drop it now.
Signed bitfields of size `1` hold the values `0` and `-1`, but are
usually assigned `1`, possibly leading to subtle bugs when the value
is explicitely compared against `1`.
Most DNS servers provide A/AAAA records in the Additional section of a
response, which correspond to the SRV records from the Answer section:
;; QUESTION SECTION:
;_http._tcp.be1.domain.tld. IN SRV
;; ANSWER SECTION:
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A1.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A8.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A5.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A6.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A4.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A3.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A2.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A7.domain.tld.
;; ADDITIONAL SECTION:
A1.domain.tld. 3600 IN A 192.168.0.1
A8.domain.tld. 3600 IN A 192.168.0.8
A5.domain.tld. 3600 IN A 192.168.0.5
A6.domain.tld. 3600 IN A 192.168.0.6
A4.domain.tld. 3600 IN A 192.168.0.4
A3.domain.tld. 3600 IN A 192.168.0.3
A2.domain.tld. 3600 IN A 192.168.0.2
A7.domain.tld. 3600 IN A 192.168.0.7
SRV record support was introduced in HAProxy 1.8 and the first design
did not take into account the records from the Additional section.
Instead, a new resolution is associated to each server with its relevant
FQDN.
This behavior generates a lot of DNS requests (1 SRV + 1 per server
associated).
This patch aims at fixing this by:
- when a DNS response is validated, we associate A/AAAA records to
relevant SRV ones
- set a flag on associated servers to prevent them from running a DNS
resolution for said FADN
- update server IP address with information found in the Additional
section
If no relevant record can be found in the Additional section, then
HAProxy will failback to running a dedicated resolution for this server,
as it used to do.
This behavior is the one described in RFC 2782.
It is now possible to insert any attribute when a cookie is inserted by
HAProxy. Any value may be set, no check is performed except the syntax validity
(CTRL chars and ';' are forbidden). For instance, it may be used to add the
SameSite attribute:
cookie SRV insert attr "SameSite=Strict"
The attr option may be repeated to add several attributes.
This patch should fix the issue #361.
It is now possible to set the error message to use when a deny rule is
executed. It may be a specific error file, adding "errorfile <file>" :
http-request deny deny_status 400 errorfile /etc/haproxy/errorfiles/400badreq.http
It may also be an error file from an http-errors section, adding "errorfiles
<name>" :
http-request deny errorfiles my-errors # use 403 error from "my-errors" section
When defined, this error message is set in the HTTP transaction. The tarpit rule
is also concerned by this change.
It is now possible to set the error message to return to client in the HTTP
transaction. If it is defined, this error message is used instead of proxy's
errors or default errors.
It is now possible to import in a proxy, fully or partially, error files
declared in an http-errors section. It may be done using the "errorfiles"
directive, followed by a name and optionally a list of status code. If there is
no status code specified, all error files of the http-errors section are
imported. Otherwise, only error files associated to the listed status code are
imported. For instance :
http-errors my-errors
errorfile 400 ...
errorfile 403 ...
errorfile 404 ...
frontend frt
errorfiles my-errors 403 404 # ==> error 400 not imported
A new section may now be declared in the configuration to create global groups
of HTTP errors. These groups are not linked to a proxy and are referenced by
name. The section must be declared using the keyword "http-errors" followed by
the group name. This name must be unique. A list of "errorfile" directives may
be declared in such section. For instance:
http-errors website-1
errorfile 400 /path/to/site1/400.http
errorfile 404 /path/to/site1/404.http
http-errors website-2
errorfile 400 /path/to/site2/400.http
errorfile 404 /path/to/site2/404.http
For now, it is just possible to create "http-errors" sections. There is no
documentation because these groups are not used yet.
All custom HTTP errors are now stored in a global tree. Proxies use a references
on these messages. The key used for errorfile directives is the file name as
specified in the configuration. For errorloc directives, a key is created using
the redirect code and the url. This means that the same custom error message is
now stored only once. It may be used in several proxies or for several status
code, it is only parsed and stored once.
Now, this action is use its own dedicated function and is no longer handled "in
place" during the TCP rules evaluation. Thus the action name ACT_TCP_CAPTURE is
removed. The action type is set to ACT_CUSTOM and a check function is used to
know if the rule depends on request contents while there is no inspect-delay.
Now, these actions use their own dedicated function and are no longer handled
"in place" during the TCP/HTTP rules evaluation. Thus the action names
ACT_ACTION_TRK_SC0 and ACT_ACTION_TRK_SCMAX are removed. The action type is now
the tracking index. Thus the function trk_idx() is no longer needed.
Now, the early-hint action uses its own dedicated action and is no longer
handled "in place" during the HTTP rules evaluation. Thus the action name
ACT_HTTP_EARLY_HINT is removed. In additionn, http_add_early_hint_header() and
http_reply_103_early_hints() are also removed. This part is now handled in the
new action_ptr callback function.
Now, these actions use their own dedicated function and are no longer handled
"in place" during the HTTP rules evaluation. Thus the action names
ACT_HTTP_*_ACL and ACT_HTTP_*_MAP are removed. The action type is now mapped as
following: 0 = add-acl, 1 = set-map, 2 = del-acl and 3 = del-map.
Now, these actions use their own dedicated function and are no longer handled
"in place" during the HTTP rules evaluation. Thus the action names
ACT_HTTP_SET_HDR and ACT_HTTP_ADD_VAL are removed. The action type is now set to
0 to set a header (so remove existing ones if any and add a new one) or to 1 to
add a header (add without remove).
Now, these actions use their own dedicated function and are no longer handled
"in place" during the HTTP rules evaluation. Thus the action names
ACT_HTTP_REPLACE_HDR and ACT_HTTP_REPLACE_VAL are removed. The action type is
now set to 0 to evaluate the whole header or to 1 to evaluate every
comma-delimited values.
The function http_transform_header_str() is renamed to http_replace_hdrs() to be
more explicit and the function http_transform_header() is removed. In fact, this
last one is now more or less the new action function.
The lua code has been updated accordingly to use http_replace_hdrs().
<action> field in the act_rule structure is now an integer. The act_name values
are used for all actions without action function (but it is not a pre-requisit
though) or the action will have no effect. But for all other actions, any
integer value may used, only the action function will take care of it. The
default for such actions is ACT_CUSTOM.
Some flags can now be set on an action when it is registered. The flags are
defined in the act_flag enum. For now, only ACT_FLAG_FINAL may be set on an
action to specify if it stops the rules evaluation. It is set on
ACT_ACTION_ALLOW, ACT_ACTION_DENY, ACT_HTTP_REQ_TARPIT, ACT_HTTP_REQ_AUTH,
ACT_HTTP_REDIR and ACT_TCP_CLOSE actions. But, when required, it may also be set
on custom actions.
Consequently, this flag is checked instead of the action type during the
configuration parsing to trigger a warning when a rule inhibits all the
following ones.
The flags in the act_flag enum have been renamed act_opt. It means ACT_OPT
prefix is used instead of ACT_FLAG. The purpose of this patch is to reserve the
action flags for the actions configuration.
When TCP and HTTP rules are evaluated, if an action function (action_ptr field
in the act_rule structure) is defined for a given action, it is now always
called in priority over the test on the action type. Concretly, for now, only
custom actions define it. Thus there is no change. It just let us the choice to
extend the action type beyond the existing ones in the enum.
Info used by HTTP rules manipulating the message itself are splitted in several
structures in the arg union. But it is possible to group all of them in a unique
struct. Now, <arg.http> is used by most of these rules, which contains:
* <arg.http.i> : an integer used as status code, nice/tos/mark/loglevel or
action id.
* <arg.http.str> : an IST used as header name, reason string or auth realm.
* <arg.http.fmt> : a log-format compatible expression
* <arg.http.re> : a regular expression used by replace rules
Arguments used by actions are never released during HAProxy deinit. Now, it is
possible to specify a function to do so. ".release_ptr" field in the act_rule
structure may be set during the configuration parsing to a specific deinit
function depending on the action type.
the HTTP_MSGF_SOFT_RW flag must now be set on the HTTP transaction to ignore
rewrite errors on a message, from HTTP rules. The mode is called the soft
rewrites. If thes flag is not set, strict rewrites are performed. In this mode,
if a rewrite error occurred, an internal error is reported.
For now, HTTP_MSGF_SOFT_RW is always set and there is no way to switch a
transaction in strict mode.
The failed_secu counter is only used for the servers stats. It is used to report
the number of denied responses. On proxies, the same info is stored in the
denied_resp counter. So, it is more consistent to use the same field for
servers.
The stats field ST_F_EINT has been added to report internal errors encountered
per proxy, per listener and per server. It appears in the CLI export and on the
HTML stats page.
