The trash is used everywhere to store the results of temporary strings
built out of s(n)printf, or as a storage for a chunk when chunks are
needed.
Using global.tune.bufsize is not the most convenient thing either.
So let's replace trash with a chunk and directly use it as such. We can
then use trash.size as the natural way to get its size, and get rid of
many intermediary chunks that were previously used.
The patch is huge because it touches many areas but it makes the code
a lot more clear and even outlines places where trash was used without
being that obvious.
This function's naming was misleading as it is used to append data
at the end of a string, causing some surprizes when used for the
first time!
Add a chunk_printf() function which does what its name suggests.
This is a first step in avoiding to constantly reinitialize chunks.
It replaces the old chunk_reset() which was not properly named as it
used to drop everything and was only used by chunk_destroy(). It has
been renamed chunk_drop().
We will need to be able to switch server connections on a session and
to keep idle connections. In order to achieve this, the preliminary
requirement is that the connections can survive the session and be
detached from them.
Right now they're still allocated at exactly the same place, so when
there is a session, there are always 2 connections. We could soon
improve on this by allocating the outgoing connection only during a
connect().
This current patch touches a lot of code and intentionally does not
change any functionnality. Performance tests show no regression (even
a very minor improvement). The doc has not yet been updated.
This commit introduces HTTP compression using the zlib library.
http_response_forward_body has been modified to call the compression
functions.
This feature includes 3 algorithms: identity, gzip and deflate:
* identity: this is mostly for debugging, and it was useful for
developping the compression feature. With Content-Length in input, it
is making each chunk with the data available in the current buffer.
With chunks in input, it is rechunking, the output chunks will be
bigger or smaller depending of the size of the input chunk and the
size of the buffer. Identity does not apply any change on data.
* gzip: same as identity, but applying a gzip compression. The data
are deflated using the Z_NO_FLUSH flag in zlib. When there is no more
data in the input buffer, it flushes the data in the output buffer
(Z_SYNC_FLUSH). At the end of data, when it receives the last chunk in
input, or when there is no more data to read, it writes the end of
data with Z_FINISH and the ending chunk.
* deflate: same as gzip, but with deflate algorithm and zlib format.
Note that this algorithm has ambiguous support on many browsers and
no support at all from recent ones. It is strongly recommended not
to use it for anything else than experimentation.
You can't choose the compression ratio at the moment, it will be set to
Z_BEST_SPEED (1), as tests have shown very little benefit in terms of
compression ration when going above for HTML contents, at the cost of
a massive CPU impact.
Compression will be activated depending of the Accept-Encoding request
header. With identity, it does not take care of that header.
To build HAProxy with zlib support, use USE_ZLIB=1 in the make
parameters.
This work was initially started by David Du Colombier at Exceliance.
This state's name is confusing as it is only used with chunked encoding
and makes newcomers think it's also related to the content-length. Let's
call it CHUNK_CRLF to clear any doubt on this.
This tiny function was not inlined because initially not much used.
However it's been used un the chunk parser for a while and it became
one of the most CPU-cycle eater there. By inlining it, the chunk parser
speed was increased by 74 %. We're almost 3 times faster than original
with just the last 4 commits.
Most calls to channel_forward() are performed with short byte counts and
are already optimized in channel_forward() taking just a few instructions.
Thus it's a waste of CPU cycles to call a function for this, let's just
inline the short byte count case and fall back to the common one for
remaining situations.
Doing so has increased the chunked encoding parser's performance by 12% !
ACL and sample fetches use args list and it is really not convenient to
check for null args everywhere. Now for empty args we pass a constant
list of end of lists. It will allow us to remove many useless checks.
It's sometimes needed to be able to compare a zero-terminated string with a
chunk, so we now have two functions to do that, one strcmp() equivalent and
one strcasecmp() equivalent.
The ssl_npn match could not work by itself because clients do not use
the NPN extension unless the server advertises the protocols it supports.
Thanks to Simone Bordet for the explanations on how to get it right.
The struct target contains one int and one pointer, causing it to be
64-bit aligned on 64-bit platforms. By marking it "packed", we can
save 8 bytes in struct connection and as many in struct session on
such platforms.
This field was used to trace precisely where a session was terminated
but it did not survive code rearchitecture and was not used at all
anymore. Let's get rid of it.
Now that the buffer is moved out of the channel, it is possible to move
the pointer earlier in the struct and reorder some fields. This new
ordering improves overall performance by 2%, mainly saved in the HTTP
parsers and data transfers.
With this commit, we now separate the channel from the buffer. This will
allow us to replace buffers on the fly without touching the channel. Since
nobody is supposed to keep a reference to a buffer anymore, doing so is not
a problem and will also permit some copy-less data manipulation.
Interestingly, these changes have shown a 2% performance increase on some
workloads, probably due to a better cache placement of data.
These two new log-format tags report the SSL protocol version (%sslv) and the
SSL ciphers (%sslc) used for the connection with the client. For instance, to
append these information just after the client's IP/port address information
on an HTTP log line, use the following configuration :
log-format %Ci:%Cp\ %sslv:%sslc\ [%t]\ %ft\ %b/%s\ %Tq/%Tw/%Tc/%Tr/%Tt\ %st\ %B\ %cc\ \ %cs\ %tsc\ %ac/%fc/%bc/%sc/%rc\ %sq/%bq\ %hr\ %hs\ %{+Q}r
It will report a line such as the following one :
Oct 12 20:47:30 haproxy[9643]: 127.0.0.1:43602 TLSv1:AES-SHA [12/Oct/2012:20:47:30.303] stick2~ stick2/s1 7/0/12/0/19 200 145 - - ---- 0/0/0/0/0 0/0 "GET /?t=0 HTTP/1.0"
This flag will have to be set on log tags which require transport layer
information. They will prevent the conn_xprt_close() call from releasing
the transport layer too early.
When we start logging SSL information, we need the SSL struct to be
present even past the conn_xprt_close() call. In order to achieve this,
we should use refcounting on the connection and the transport layer. At
the moment it's not worth using plain refcounting as only the logs require
this, so instead of real refcounting we just use a flag which will be set
by the log subsystem when SSL data need to be logged.
What happens then is that the xprt->close() call is ignored and the
transport layer is closed again during session_free(), after the log
line is emitted.
When calling conn_xprt_close(), we always clear the transport pointer
so that all transport layers leave the connection in the same state after
a close. This will also make it safer and cheaper to call conn_xprt_close()
multiple times if needed.
Until now it was not possible to know from the logs whether the incoming
connection was made over SSL or not. In order to address this in the existing
log formats, a new log format %ft was introduced, to log the frontend's name
suffixed with its transport layer. The only transport layer in use right now
is '~' for SSL, so that existing log formats for non-SSL traffic are not
affected at all, and SSL log formats have the frontend's name suffixed with
'~'.
The TCP, HTTP and CLF log format now use %ft instead of %f. This does not
affect existing log formats which still make use of %f however.
It now becomes possible to verify the server's certificate using the "verify"
directive. This one only supports "none" and "required", as it does not make
much sense to also support "optional" here.
Just like with the "bind" lines, we'll switch the "server" line
parsing to keyword registration. The code is essentially the same
as for bind keywords, with minor changes such as support for the
default-server keywords and support for variable argument count.
On Linux, accept4() does the same as accept() except that it allows
the caller to specify some flags to set on the resulting socket. We
use this to set the O_NONBLOCK flag and thus to save one fcntl()
call in each connection. The effect is a small performance gain of
around 1%.
The option is automatically enabled when target linux2628 is set, or
when the USE_ACCEPT4 Makefile variable is set. If the libc is too old
to provide the equivalent function, this is automatically detected and
our own function is used instead. In any case it is possible to force
the use of our implementation with USE_MY_ACCEPT4.
Baptiste Assmann reported a bug causing a crash on recent versions when
sticking rules were set on layer 7 in a TCP proxy. The bug is easier to
reproduce with the "defer-accept" option on the "bind" line in order to
have some contents to parse when the connection is accepted. The issue
is that the acl_prefetch_http() function called from HTTP fetches relies
on hdr_idx to be preinitialized, which is not the case if there is no L7
ACL.
The solution consists in adding a new SMP_CAP_L7 flag to fetches to indicate
that they are expected to work on L7 data, so that the proxy knows that the
hdr_idx has to be initialized. This is already how ACL and HTTP mode are
handled.
The bug was present since 1.5-dev9.
These ones are used to set the default ciphers suite on "bind" lines and
"server" lines respectively, instead of using OpenSSL's defaults. These
are probably mainly useful for distro packagers.
When health checks are configured on a server which has the send-proxy
directive and no "port" nor "addr" settings, the health check connections
will automatically use the PROXY protocol. If "port" or "addr" are set,
the "check-send-proxy" directive may be used to force the protocol.
Since it's possible for the checks to use a different protocol or transport layer
than the prod traffic, we need to have them referenced in the server. The
SSL checks are not enabled yet, but the transport layers are completely used.
