Patch "MINOR: ssl: support ssl-min-ver and ssl-max-ver with crt-list"
introduce ssl_methods in struct ssl_bind_conf. struct bind_conf have now
ssl_methods and ssl_conf.ssl_methods (unused). It's error-prone. This patch
remove the duplicate structure to avoid any confusion.
After careful inspection, this flag is set at exactly two places :
- once in the health-check receive callback after receipt of a
response
- once in the stream interface's shutw() code where CF_SHUTW is
always set on chn->flags
The flag was checked in the checks before deciding to send data, but
when it is set, the wake() callback immediately closes the connection
so the CO_FL_SOCK_WR_SH flag is also set.
The flag was also checked in si_conn_send(), but checking the channel's
flag instead is enough and even reveals that one check involving it
could never match.
So it's time to remove this flag and replace its check with a check of
CF_SHUTW in the stream interface. This way each layer is responsible
for its shutdown, this will ease insertion of the mux layer.
This flag is both confusing and wrong. It is supposed to report the
fact that the data layer has received a shutdown, but in fact this is
reported by CO_FL_SOCK_RD_SH which is set by the transport layer after
this condition is detected. The only case where the flag above is set
is in the stream interface where CF_SHUTR is also set on the receiving
channel.
In addition, it was checked in the health checks code (while never set)
and was always test jointly with CO_FL_SOCK_RD_SH everywhere, except in
conn_data_read0_pending() which incorrectly doesn't match the second
time it's called and is fortunately protected by an extra check on
(ic->flags & CF_SHUTR).
This patch gets rid of the flag completely. Now conn_data_read0_pending()
accurately reports the fact that the transport layer has detected the end
of the stream, regardless of the fact that this state was already consumed,
and the stream interface watches ic->flags&CF_SHUTR to know if the channel
was already closed by the upper layer (which it already used to do).
The now unused conn_data_read0() function was removed.
The session may need to enforce a timeout when waiting for a handshake.
Till now we used a trick to avoid allocating a pointer, we used to set
the connection's owner to the task and set the task's context to the
session, so that it was possible to circle between all of them. The
problem is that we'll really need to pass the pointer to the session
to the upper layers during initialization and that the only place to
store it is conn->owner, which is squatted for this trick.
So this patch moves the struct task* into the session where it should
always have been and ensures conn->owner points to the session until
the data layer is properly initialized.
Historically listeners used to have a handler depending on the upper
layer. But now it's exclusively process_stream() and nothing uses it
anymore so it can safely be removed.
Currently a task is allocated in session_new() and serves two purposes :
- either the handshake is complete and it is offered to the stream via
the second arg of stream_new()
- or the handshake is not complete and it's diverted to be used as a
timeout handler for the embryonic session and repurposed once we land
into conn_complete_session()
Furthermore, the task's process() function was taken from the listener's
handler in conn_complete_session() prior to being replaced by a call to
stream_new(). This will become a serious mess with the mux.
Since it's impossible to have a stream without a task, this patch removes
the second arg from stream_new() and make this function allocate its own
task. In session_accept_fd(), we now only allocate the task if needed for
the embryonic session and delete it later.
The ->init() callback of the connection's data layer was only used to
complete the session's initialisation since sessions and streams were
split apart in 1.6. The problem is that it creates a big confusion in
the layers' roles as the session has to register a dummy data layer
when waiting for a handshake to complete, then hand it off to the
stream which will replace it.
The real need is to notify that the transport has finished initializing.
This should enable a better splitting between these layers.
This patch thus introduces a connection-specific callback called
xprt_done_cb() which informs about handshake successes or failures. With
this, data->init() can disappear, CO_FL_INIT_DATA as well, and we don't
need to register a dummy data->wake() callback to be notified of errors.
Till now connections used to rely exclusively on file descriptors. It
was planned in the past that alternative solutions would be implemented,
leading to member "union t" presenting sock.fd only for now.
With QUIC, the connection will need to continue to exist but will not
rely on a file descriptor but a connection ID.
So this patch introduces a "connection handle" which is either a file
descriptor or a connection ID, to replace the existing "union t". We've
now removed the intermediate "struct sock" which was never used. There
is no functional change at all, though the struct connection was inflated
by 32 bits on 64-bit platforms due to alignment.
Since commit 9d8dbbc ("MINOR: dns: Maximum DNS udp payload set to 8192") it's
possible to specify a packet size, but passing too large a size or a negative
size is not detected and results in memset() being performed over a 2GB+ area
upon receipt of the first DNS response, causing runtime crashes.
We now check that the size is not smaller than the smallest packet which is
the DNS header size (12 bytes).
No backport is needed.
Following up DNS extension introduction, this patch aims at making the
computation of the maximum number of records in DNS response dynamic.
This computation is based on the announced payload size accepted by
HAProxy.
This patch fixes a bug where some servers managed by SRV record query
types never ever recover from a "no resolution" status.
The problem is due to a wrong function called when breaking the
server/resolution (A/AAAA) relationship: this is performed when a server's SRV
record disappear from the SRV response.
Contrary to 64-bits libCs where size_t type size is 8, on systems with 32-bits
size of size_t is 4 (the size of a long) which does not equal to size of uint64_t type.
This was revealed by such GCC warnings on 32bits systems:
src/flt_spoe.c:2259:40: warning: passing argument 4 of spoe_decode_buffer from
incompatible pointer type
if (spoe_decode_buffer(&p, end, &str, &sz) == -1)
^
As the already existing code using spoe_decode_buffer() already use such pointers to
uint64_t, in place of pointer to size_t ;), most of this code is in contrib directory,
this simple patch modifies the prototype of spoe_decode_buffer() so that to use a
pointer to uint64_t in place of a pointer to size_t, uint64_t type being the type
finally required for decode_varint().
The two macros EXPECT_LF_HERE and EAT_AND_JUMP_OR_RETURN were exported
for use outside the HTTP parser. They now take extra arguments to avoid
implicit pointers and jump labels. These will be used to reimplement a
minimalist HTTP/1 parser in the H1->H2 gateway.
For HPACK we'll need to perform a lot of string manipulation between the
dynamic headers table and the output stream, and we need an efficient way
to deal with that, considering that the zero character is not an end of
string marker here. It turns out that gcc supports returning structs from
functions and is able to place up to two words directly in registers when
-freg-struct is used, which is the case by default on x86 and armv8. On
other architectures the caller reserves some stack space where the callee
can write, which is equivalent to passing a pointer to the return value.
So let's implement a few functions to deal with this as the resulting code
will be optimized on certain architectures where retrieving the length of
a string will simply consist in reading one of the two returned registers.
Extreme care was taken to ensure that the compiler gets maximum opportunities
to optimize out every bit of unused code. This is also the reason why no
call to regular string functions (such as strlen(), memcmp(), memcpy() etc)
were used. The code involving them is often larger than when they are open
coded. Given that strings are usually very small, especially when manipulating
headers, the time spent calling a function optimized for large vectors often
ends up being higher than the few cycles needed to count a few bytes.
An issue was met with __builtin_strlen() which can automatically convert
a constant string to its constant length. It doesn't accept NULLs and there
is no way to hide them using expressions as the check is made before the
optimizer is called. On gcc 4 and above, using an intermediary variable
is enough to hide it. On older versions, calls to ist() with an explicit
NULL argument will issue a warning. There is normally no reason to do this
but taking care of it the best possible still seems important.
Now each stream is added to the session's list of streams, so that it
will be possible to know all the streams belonging to a session, and
to know if any stream is still attached to a sessoin.
These two functions respectively copy a memory area onto the chunk, and
append the contents of a memory area over a chunk. They are convenient
to prepare binary output data to be sent and will be used for HTTP/2.
Edns extensions may be used to negotiate some settings between a DNS
client and a server.
For now we only use it to announce the maximum response payload size accpeted
by HAProxy.
This size can be set through a configuration parameter in the resolvers
section. If not set, it defaults to 512 bytes.
Commit 48a8332a introduce SSL_CTX_get0_privatekey in openssl-compat.h but
SSL_CTX_get0_privatekey access internal structure and can't be a candidate
to openssl-compat.h. The workaround with openssl < 1.0.2 is to use SSL_new
then SSL_get_privatekey.
Make it so for each server, instead of specifying a hostname, one can use
a SRV label.
When doing so, haproxy will first resolve the SRV label, then use the
resulting hostnames, as well as port and weight (priority is ignored right
now), to each server using the SRV label.
It is resolved periodically, and any server disappearing from the SRV records
will be removed, and any server appearing will be added, assuming there're
free servers in haproxy.
As DNS servers may not return all IPs in one answer, we want to cache the
previous entries. Those entries are removed when considered obsolete, which
happens when the IP hasn't been returned by the DNS server for a time
defined in the "hold obsolete" parameter of the resolver section. The default
is 30s.
Since the commit f6b37c67 ["BUG/MEDIUM: ssl: in bind line, ssl-options after
'crt' are ignored."], the certificates generation is broken.
To generate a certificate, we retrieved the private key of the default
certificate using the SSL object. But since the commit f6b37c67, the SSL object
is created with a dummy certificate (initial_ctx).
So to fix the bug, we use directly the default certificate in the bind_conf
structure. We use SSL_CTX_get0_privatekey function to do so. Because this
function does not exist for OpenSSL < 1.0.2 and for LibreSSL, it has been added
in openssl-compat.h with the right #ifdef.
If a server presents an unexpected certificate to haproxy, that is, a
certificate that doesn't match the expected name as configured in
verifyhost or as requested using SNI, we want to store that precious
information. Fortunately we have access to the connection in the
verification callback so it's possible to store an error code there.
For this purpose we use CO_ER_SSL_MISMATCH_SNI (for when the cert name
didn't match the one requested using SNI) and CO_ER_SSL_MISMATCH for
when it doesn't match verifyhost.
This patch fixes the commit 2ab8867 ("MINOR: ssl: compare server certificate
names to the SNI on outgoing connections")
When we check the certificate sent by a server, in the verify callback, we get
the SNI from the session (SSL_SESSION object). In OpenSSL, tlsext_hostname value
for this session is copied from the ssl connection (SSL object). But the copy is
done only if the "server_name" extension is found in the server hello
message. This means the server has found a certificate matching the client's
SNI.
When the server returns a default certificate not matching the client's SNI, it
doesn't set any "server_name" extension in the server hello message. So no SNI
is set on the SSL session and SSL_SESSION_get0_hostname always returns NULL.
To fix the problemn, we get the SNI directly from the SSL connection. It is
always defined with the value set by the client.
If the commit 2ab8867 is backported in 1.7 and/or 1.6, this one must be
backported too.
Note: it's worth mentionning that by making the SNI check work, we
introduce another problem by which failed SNI checks can cause
long connection retries on the server, and in certain cases the
SNI value used comes from the client. So this patch series must
not be backported until this issue is resolved.
task_init() is called exclusively by task_new() which is the only way
to create a task. Most callers set t->expire to TICK_ETERNITY, some set
it to another value and a few like Lua don't set it at all as they don't
need a timeout, causing random values to be used in case the task gets
queued.
Let's always set t->expire to TICK_ETERNITY in task_init() so that all
tasks are now initialized in a clean state.
This patch can be backported as it will definitely make the code more
robust (at least the Lua code, possibly other places).
timegm() is not provided everywhere and the documentation on how to
replace it is bogus as it proposes an inefficient and non-thread safe
alternative.
Here we reimplement everything needed to compute the number of seconds
since Epoch based on the broken down fields in struct tm. It is only
guaranteed to return correct values for correct inputs. It was successfully
tested with all possible 32-bit values of time_t converted to struct tm
using gmtime() and back to time_t using the legacy timegm() and this
function, and both functions always produced the same result.
Thanks to Benoît Garnier for an instructive discussion and detailed
explanations of the various time functions, leading to this solution.
In some cases, the socket is misused. The user can open socket and never
close it, or open the socket and close it without sending data. This
causes resources leak on all resources associated to the stream (buffer,
spoe, ...)
This is caused by the stream_shutdown function which is called outside
of the stream execution process. Sometimes, the shtudown is required
while the stream is not started, so the cleanup is ignored.
This patch change the shutdown mode of the session. Now if the session is
no longer used and the Lua want to destroy it, it just set a destroy flag
and the session kill itself.
This patch should be backported in 1.6 and 1.7
Functions hdr_idx_first_idx() and hdr_idx_first_pos() were missing a
"const" qualifier on their arguments which are not modified, causing
a warning in some experimental H2 code.
When several stick-tables were configured with several peers sections,
only a part of them could be synchronized: the ones attached to the last
parsed 'peers' section. This was due to the fact that, at least, the peer I/O handler
refered to the wrong peer section list, in fact always the same: the last one parsed.
The fact that the global peer section list was named "struct peers *peers"
lead to this issue. This variable name is dangerous ;).
So this patch renames global 'peers' variable to 'cfg_peers' to ensure that
no such wrong references are still in use, then all the functions wich used
old 'peers' variable have been modified to refer to the correct peer list.
Must be backported to 1.6 and 1.7.
When support for passing SNI to the server was added in 1.6-dev3, there
was no way to validate that the certificate presented by the server would
really match the name requested in the SNI, which is quite a problem as
it allows other (valid) certificates to be presented instead (when hitting
the wrong server or due to a man in the middle).
This patch adds the missing check against the value passed in the SNI.
The "verifyhost" value keeps precedence if set. If no SNI is used and
no verifyhost directive is specified, then the certificate name is not
checked (this is unchanged).
In order to extract the SNI value, it was necessary to make use of
SSL_SESSION_get0_hostname(), which appeared in openssl 1.1.0. This is
a trivial function which returns the value of s->tlsext_hostname, so
it was provided in the compat layer for older versions. After some
refinements from Emmanuel, it now builds with openssl 1.0.2, openssl
1.1.0 and boringssl. A test file was provided to ease testing all cases.
After some careful observation period it may make sense to backport
this to 1.7 and 1.6 as some users rightfully consider this limitation
as a bug.
Cc: Emmanuel Hocdet <manu@gandi.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The bug: Maps/ACLs using the same file/id can mistakenly inherit
their flags from the last declared one.
i.e.
$ cat haproxy.conf
listen mylistener
mode http
bind 0.0.0.0:8080
acl myacl1 url -i -f mine.acl
acl myacl2 url -f mine.acl
acl myacl3 url -i -f mine.acl
redirect location / if myacl2
$ cat mine.acl
foobar
Shows an unexpected redirect for request 'GET /FOObAR HTTP/1.0\n\n'.
This fix should be backported on mainline branches v1.6 and v1.7.
The reference of the current map/acl element to dump could
be destroyed if map is updated from an 'http-request del-map'
configuration rule or throught a 'del map/acl' on CLI.
We use a 'back_refs' chaining element to fix this. As it
is done to dump sessions.
This patch needs also fix:
'BUG/MAJOR: cli: fix custom io_release was crushed by NULL.'
To clean the back_ref and avoid a crash on a further
del/clear map operation.
Those fixes should be backported on mainline branches 1.7 and 1.6.
This patch wont directly apply on 1.6.
In order to authorize call of appctx_wakeup on running task:
- from within the task handler itself.
- in futur, from another thread.
The appctx is considered paused as default after running the handler.
The handler should explicitly call appctx_wakeup to be re-called.
When the appctx_free is called on a running handler. The real
free is postponed at the end of the handler process.
This will be used to retrieve the ALPN negociated over SSL (or possibly
via the proxy protocol later). It's likely that this information should
be stored in the connection itself, but it requires adding an extra
pointer and an extra integer. Thus better rely on the transport layer
to pass this info for now.
