On a tcp-response content ruleset evaluation, the inspect-delay is engaged when
rule's conditions are not validated but not when the rule's action yields.
This patch must be backported to all supported versions.
When a tcp-request or a tcp-response content ruleset evaluation is aborted, the
corresponding FLT_END analyser must be preserved, if any. But because of a typo
error, on the tcp-response content ruleset evaluation, we try to preserve the
request analyser instead of the response one.
This patch must be backported to 2.2.
On a final evaluation of a tcp-request or tcp-response content ruleset, it is
forbidden for an action to yield. To quickly identify bugs an internal error is
now returned if it happens and a warning log message is emitted.
It's unclear why the buffer length wasn't considered when tcp-response
rules were added in 1.5-dev3 with commit 97679e790 ("[MEDIUM] Implement
tcp inspect response rules"). But it's impossible to write working
tcp-response content rules as they're always waiting for the expiration
and do not consider the fact that the buffer is full. It's likely that
tcp-response content rules were only used with HTTP traffic.
This may be backported to stable versions, though it's not very
important considering that that nobody reported this in 10 years.
This patch fixes all the leftovers from the include cleanup campaign. There
were not that many (~400 entries in ~150 files) but it was definitely worth
doing it as it revealed a few duplicates.
There's no point splitting the file in two since only cfgparse uses the
types defined there. A few call places were updated and cleaned up. All
of them were in C files which register keywords.
There is nothing left in common/ now so this directory must not be used
anymore.
This one was not easy because it was embarking many includes with it,
which other files would automatically find. At least global.h, arg.h
and tools.h were identified. 93 total locations were identified, 8
additional includes had to be added.
In the rare files where it was possible to finalize the sorting of
includes by adjusting only one or two extra lines, it was done. But
all files would need to be rechecked and cleaned up now.
It was the last set of files in types/ and proto/ and these directories
must not be reused anymore.
This one is particularly difficult to split because it provides all the
functions used to manipulate a proxy state and to retrieve names or IDs
for error reporting, and as such, it was included in 73 files (down to
68 after cleanup). It would deserve a small cleanup though the cut points
are not obvious at the moment given the number of structs involved in
the struct proxy itself.
The current state of the logging is a real mess. The main problem is
that almost all files include log.h just in order to have access to
the alert/warning functions like ha_alert() etc, and don't care about
logs. But log.h also deals with real logging as well as log-format and
depends on stream.h and various other things. As such it forces a few
heavy files like stream.h to be loaded early and to hide missing
dependencies depending where it's loaded. Among the missing ones is
syslog.h which was often automatically included resulting in no less
than 3 users missing it.
Among 76 users, only 5 could be removed, and probably 70 don't need the
full set of dependencies.
A good approach would consist in splitting that file in 3 parts:
- one for error output ("errors" ?).
- one for log_format processing
- and one for actual logging.
The files were moved almost as-is, just dropping arg-t and auth-t from
acl-t but keeping arg-t in acl.h. It was useful to revisit the call places
since a handful of files used to continue to include acl.h while they did
not need it at all. Struct stream was only made a forward declaration
since not otherwise needed.
The stktable_types[] array declaration was moved to the main file as
it had nothing to do in the types. A few declarations were reordered
in the types file so that defines were before the structs. Thread-t
was added since there are a few __decl_thread(). The loss of peers.h
revealed that cfgparse-listen needed it.
The type file is becoming a mess, half of it is for the proxy protocol,
another good part describes conn_streams and mux ops, it would deserve
being split again. At least it was reordered so that elements are easier
to find, with the PP-stuff left at the end. The MAX_SEND_FD macro was moved
to compat.h as it's said to be the value for Linux.
global.h was one of the messiest files, it has accumulated tons of
implicit dependencies and declares many globals that make almost all
other file include it. It managed to silence a dependency loop between
server.h and proxy.h by being well placed to pre-define the required
structs, forcing struct proxy and struct server to be forward-declared
in a significant number of files.
It was split in to, one which is the global struct definition and the
few macros and flags, and the rest containing the functions prototypes.
The UNIX_MAX_PATH definition was moved to compat.h.
This one is particularly tricky to move because everyone uses it
and it depends on a lot of other types. For example it cannot include
arg-t.h and must absolutely only rely on forward declarations to avoid
dependency loops between vars -> sample_data -> arg. In order to address
this one, it would be nice to split the sample_data part out of sample.h.
List.h was missing for LIST_ADDQ(). A few unneeded includes of action.h
were removed from certain files.
This one still relies on applet.h and stick-table.h.
And also rename standard.c to tools.c. The original split between
tools.h and standard.h dates from version 1.3-dev and was mostly an
accident. This patch moves the files back to what they were expected
to be, and takes care of not changing anything else. However this
time tools.h was split between functions and types, because it contains
a small number of commonly used macros and structures (e.g. name_desc)
which in turn cause the massive list of includes of tools.h to conflict
with the callers.
They remain the ugliest files of the whole project and definitely need
to be cleaned and split apart. A few types are defined there only for
functions provided there, and some parts are even OS-specific and should
move somewhere else, such as the symbol resolution code.
This one is included almost everywhere and used to rely on a few other
.h that are not needed (unistd, stdlib, standard.h). It could possibly
make sense to split it into multiple parts to distinguish operations
performed on timers and the internal time accounting, but at this point
it does not appear much important.
Half of the users of this include only need the type definitions and
not the manipulation macros nor the inline functions. Moves the various
types into mini-clist-t.h makes the files cleaner. The other one had all
its includes grouped at the top. A few files continued to reference it
without using it and were cleaned.
In addition it was about time that we'd rename that file, it's not
"mini" anymore and contains a bit more than just circular lists.
This one used to be stored into debug.h but the debug tools got larger
and require a lot of other includes, which can't use BUG_ON() anymore
because of this. It does not make sense and instead this macro should
be placed into the lower includes and given its omnipresence, the best
solution is to create a new bug.h with the few surrounding macros needed
to trigger bugs and place assertions anywhere.
Another benefit is that it won't be required to add include <debug.h>
anymore to use BUG_ON, it will automatically be covered by api.h. No
less than 32 occurrences were dropped.
The FSM_PRINTF macro was dropped since not used at all anymore (probably
since 1.6 or so).
All files that were including one of the following include files have
been updated to only include haproxy/api.h or haproxy/api-t.h once instead:
- common/config.h
- common/compat.h
- common/compiler.h
- common/defaults.h
- common/initcall.h
- common/tools.h
The choice is simple: if the file only requires type definitions, it includes
api-t.h, otherwise it includes the full api.h.
In addition, in these files, explicit includes for inttypes.h and limits.h
were dropped since these are now covered by api.h and api-t.h.
No other change was performed, given that this patch is large and
affects 201 files. At least one (tools.h) was already freestanding and
didn't get the new one added.
When an end pointer is passed, instead of complaining that a comma is
missing after a keyword, sample_parse_expr() will silently return the
pointer to the current location into this return pointer so that the
caller can continue its parsing. This will be used by more complex
expressions which embed sample expressions, and may even permit to
embed sample expressions into arguments of other expressions.
A bug was introduced during TCP rules refactoring by the commit ac98d81f4
("MINOR: http-rule/tcp-rules: Make track-sc* custom actions"). There is no
stream when L4/L5 TCP rules are evaluated. For these rulesets, In track-sc*
actions, we must take care to rely on the session instead of the stream.
Because of this bug, any evaluation of L4/L5 TCP rules using a track-sc* action
leads to a crash of HAProxy.
No backport needed, except if the above commit is backported.
Most places continue to check CO_FL_HANDSHAKE while in fact they should
check CO_FL_HANDSHAKE_NOSSL, which contains all handshakes but the one
dedicated to SSL renegotiation. In fact the SSL layer should be the
only one checking CO_FL_SSL_WAIT_HS, so as to avoid processing data
when a renegotiation is in progress, but other ones randomly include it
without knowing. And ideally it should even be an internal flag that's
not exposed in the connection.
This patch takes CO_FL_SSL_WAIT_HS out of CO_FL_HANDSHAKE, uses this flag
consistently all over the code, and gets rid of CO_FL_HANDSHAKE_NOSSL.
In order to limit the confusion that has accumulated over time, the
CO_FL_SSL_WAIT_HS flag which indicates an ongoing SSL handshake,
possibly used by a renegotiation was moved after the other ones.
When an error occurred during the parsing of a TCP action, if some memory was
allocated, it should be released before exiting. Here, the fix consists for
replace a call to free() on a sample expression by a call to
release_sample_expr().
This patch may be backported to all supported versions.
Now, this action is use its own dedicated function and is no longer handled "in
place" during the TCP rules evaluation. Thus the action name ACT_TCP_CAPTURE is
removed. The action type is set to ACT_CUSTOM and a check function is used to
know if the rule depends on request contents while there is no inspect-delay.
Now, these actions use their own dedicated function and are no longer handled
"in place" during the TCP/HTTP rules evaluation. Thus the action names
ACT_ACTION_TRK_SC0 and ACT_ACTION_TRK_SCMAX are removed. The action type is now
the tracking index. Thus the function trk_idx() is no longer needed.
Some flags can now be set on an action when it is registered. The flags are
defined in the act_flag enum. For now, only ACT_FLAG_FINAL may be set on an
action to specify if it stops the rules evaluation. It is set on
ACT_ACTION_ALLOW, ACT_ACTION_DENY, ACT_HTTP_REQ_TARPIT, ACT_HTTP_REQ_AUTH,
ACT_HTTP_REDIR and ACT_TCP_CLOSE actions. But, when required, it may also be set
on custom actions.
Consequently, this flag is checked instead of the action type during the
configuration parsing to trigger a warning when a rule inhibits all the
following ones.
The flags in the act_flag enum have been renamed act_opt. It means ACT_OPT
prefix is used instead of ACT_FLAG. The purpose of this patch is to reserve the
action flags for the actions configuration.
When TCP and HTTP rules are evaluated, if an action function (action_ptr field
in the act_rule structure) is defined for a given action, it is now always
called in priority over the test on the action type. Concretly, for now, only
custom actions define it. Thus there is no change. It just let us the choice to
extend the action type beyond the existing ones in the enum.
Now, for these counters, the following rules are followed to know if it must be
incremented or not:
* if it exists for a frontend, the counter is incremented
* if stats must be collected for the session's listener, if the counter exists
for this listener, it is incremented
* if the backend is already assigned, if the counter exists for this backend,
it is incremented
* if a server is attached to the stream, if the counter exists for this
server, it is incremented
It is not hardcoded rules. Some counters are still handled in a different
way. But many counters are incremented this way now.
The new possible results for a custom action (deny/abort/invalid) are now
handled during TCP rules evaluation. For L4/L5 rules, the session is
rejected. For L7 rules, the right counter is incremented, then the connections
killed.
For now, no custom action uses these new codes.
Thanks to the commit "MINOR: actions: Use ACT_RET_CONT code to ignore an error
from a custom action", it is now possible to trigger an error from a custom
action in tcp-content rules. Now, when a custom action returns the ACT_RET_ERR
code, it has the same behavior than a reject rules, the connection is killed.
Be careful if this patch is backported. The other mentioned patch must be
backported first.
The ruleset from which a TCP rule comes from (the <from> field in the act_rule
structure) is only set when a rule is created from a registered keyword and not
for all TCP rules. But this information may be useful to check the configuration
validity or during the rule evaluation. So now, we systematically set it.
Runtime traces are now supported for the streams, only if compiled with
debug. process_stream() is covered as well as TCP/HTTP analyzers and filters.
In traces, the first argument is always a stream. So it is easy to get the info
about the channels and the stream-interfaces. The second argument, when defined,
is always a HTTP transaction. And the third one is an HTTP message. The trace
message is adapted to report HTTP info when possible.
First of all, all legacy HTTP analyzers and all functions exclusively used by
them were removed. So the most of the functions in proto_http.{c,h} were
removed. Only functions to deal with the HTTP transaction have been kept. Then,
http_msg and hdr_idx modules were entirely removed. And finally the structure
http_msg was lightened of all its useless information about the legacy HTTP. The
structure hdr_ctx was also removed because unused now, just like unused states
in the enum h1_state. Note that the memory pool "hdr_idx" was removed and
"http_txn" is now smaller.
This code should be now used by action to stop at the same time the rules
processing and the possible following processings. And from its side, the return
code ACT_RET_STOP should be used to only stop rules processing.
So concretely, for TCP rules, there is no changes. ACT_RET_STOP and ACT_RET_DONE
are handled the same way. However, for HTTP rules, ACT_RET_STOP should now be
mapped on HTTP_RULE_RES_STOP and ACT_RET_DONE on HTTP_RULE_RES_DONE. So this
way, a action will have the possibilty to stop all processing or only rules
processing.
Note that changes about the TCP is done in this commit but changes about the
HTTP will be done in another one because it will fix a bug in the same time.
This patch must be backported to 2.0 because a bugfix depends on it.
As reported in GH issue #109 and in discourse issue
https://discourse.haproxy.org/t/haproxy-returns-408-or-504-error-when-timeout-client-value-is-every-25d
the time parser doesn't error on overflows nor underflows. This is a
recurring problem which additionally has the bad taste of taking a long
time before hitting the user.
This patch makes parse_time_err() return special error codes for overflows
and underflows, and adds the control in the call places to report suitable
errors depending on the requested unit. In practice, underflows are almost
never returned as the parsing function takes care of rounding values up,
so this might possibly happen on 64-bit overflows returning exactly zero
after rounding though. It is not really possible to cut the patch into
pieces as it changes the function's API, hence all callers.
Tests were run on about every relevant part (cookie maxlife/maxidle,
server inter, stats timeout, timeout*, cli's set timeout command,
tcp-request/response inspect-delay).
Add a new XPRT that is used when using non-SSL handshakes, such as proxy
protocol or Netscaler, instead of taking care of it in conn_fd_handler().
This XPRT is installed when any of those is used, and it removes itself once
the handshake is done.
This should allow us to remove the distinction between CO_FL_SOCK* and
CO_FL_XPRT*.
The new flag SI_FL_KILL_CONN is now set by the rare actions which
deliberately want the whole connection (and not just the stream) to be
killed. This is only used for "tcp-request content reject",
"tcp-response content reject", "tcp-response content close" and
"http-request reject". The purpose is to desambiguate the close from
a regular shutdown. This will be used by the next patches.
This switches explicit calls to various trivial registration methods for
keywords, muxes or protocols from constructors to INITCALL1 at stage
STG_REGISTER. All these calls have in common to consume a single pointer
and return void. Doing this removes 26 constructors. The following calls
were addressed :
- acl_register_keywords
- bind_register_keywords
- cfg_register_keywords
- cli_register_kw
- flt_register_keywords
- http_req_keywords_register
- http_res_keywords_register
- protocol_register
- register_mux_proto
- sample_register_convs
- sample_register_fetches
- srv_register_keywords
- tcp_req_conn_keywords_register
- tcp_req_cont_keywords_register
- tcp_req_sess_keywords_register
- tcp_res_cont_keywords_register
- flt_register_keywords
It remained some fragments of the old buffers API in debug messages, here and
there.
This was caused by the recent buffer API changes, no backport is needed.
Chunks are only a subset of a buffer (a non-wrapping version with no head
offset). Despite this we still carry a lot of duplicated code between
buffers and chunks. Replacing chunks with buffers would significantly
reduce the maintenance efforts. This first patch renames the chunk's
fields to match the name and types used by struct buffers, with the goal
of isolating the code changes from the declaration changes.
Most of the changes were made with spatch using this coccinelle script :
@rule_d1@
typedef chunk;
struct chunk chunk;
@@
- chunk.str
+ chunk.area
@rule_d2@
typedef chunk;
struct chunk chunk;
@@
- chunk.len
+ chunk.data
@rule_i1@
typedef chunk;
struct chunk *chunk;
@@
- chunk->str
+ chunk->area
@rule_i2@
typedef chunk;
struct chunk *chunk;
@@
- chunk->len
+ chunk->data
Some minor updates to 3 http functions had to be performed to take size_t
ints instead of ints in order to match the unsigned length here.
During the migration to the second version of the pools, the new
functions and pool pointers were all called "pool_something2()" and
"pool2_something". Now there's no more pool v1 code and it's a real
pain to still have to deal with this. Let's clean this up now by
removing the "2" everywhere, and by renaming the pool heads
"pool_head_something".
Now, each proxy contains a lock that must be used when necessary to protect
it. Moreover, all proxy's counters are now updated using atomic operations.
First, we use atomic operations to update jobs/totalconn/actconn variables,
listener's nbconn variable and listener's counters. Then we add a lock on
listeners to protect access to their information. And finally, listener queues
(global and per proxy) are also protected by a lock. Here, because access to
these queues are unusal, we use the same lock for all queues instead of a global
one for the global queue and a lock per proxy for others.
The tcp rules may be applied to a TCP stream initiated by applets (spoe,
lua, peers, later H2). These ones do not necessarily have a valid listener
so we must verify the field is not null before updating the stats. For now
there's no way to trigger this bug because lua and peers don't have analysers,
h2 is not implemented and spoe has a dummy listener. But this threatens to
break at any instant.
There's no more reason to keep tcp rules processing inside proto_tcp.c
given that there is nothing in common there except these 3 letters : tcp.
The tcp rules are in fact connection, session and content processing rules.
Let's move them to "tcp-rules" and let them live their life there.
