Make it so for each server, instead of specifying a hostname, one can use
a SRV label.
When doing so, haproxy will first resolve the SRV label, then use the
resulting hostnames, as well as port and weight (priority is ignored right
now), to each server using the SRV label.
It is resolved periodically, and any server disappearing from the SRV records
will be removed, and any server appearing will be added, assuming there're
free servers in haproxy.
When several stick-tables were configured with several peers sections,
only a part of them could be synchronized: the ones attached to the last
parsed 'peers' section. This was due to the fact that, at least, the peer I/O handler
refered to the wrong peer section list, in fact always the same: the last one parsed.
The fact that the global peer section list was named "struct peers *peers"
lead to this issue. This variable name is dangerous ;).
So this patch renames global 'peers' variable to 'cfg_peers' to ensure that
no such wrong references are still in use, then all the functions wich used
old 'peers' variable have been modified to refer to the correct peer list.
Must be backported to 1.6 and 1.7.
This patch adds a new stats socket command to modify server
FQDNs at run time.
Its syntax:
set server <backend>/<server> fqdn <FQDN>
This patch also adds FQDNs to server state file at the end
of each line for backward compatibility ("-" if not present).
When running with multiple process, if some proxies are just assigned
to some processes, the other processes will just close the file descriptors
for the listening sockets. However, we may still have to provide those
sockets when reloading, so instead we just try hard to pretend those proxies
are dead, while keeping the sockets opened.
A new global option, no-reused-socket", has been added, to restore the old
behavior of closing the sockets not bound to this process.
When SIGUSR1 is received, haproxy enters in soft-stop and quits when no
connection remains.
It can happen that the instance remains alive for a long time, depending
on timeouts and traffic. This option ensures that soft-stop won't run
for too long.
Example:
global
hard-stop-after 30s # Once in soft-stop, the instance will remain
# alive for at most 30 seconds.
A tcp half connection can cause 100% CPU on expiration.
First reproduced with this haproxy configuration :
global
tune.bufsize 10485760
defaults
timeout server-fin 90s
timeout client-fin 90s
backend node2
mode tcp
timeout server 900s
timeout connect 10s
server def 127.0.0.1:3333
frontend fe_api
mode tcp
timeout client 900s
bind :1990
use_backend node2
Ie timeout server-fin shorter than timeout server, the backend server
sends data, this package is left in the cache of haproxy, the backend
server continue sending fin package, haproxy recv fin package. this
time the session information is as follows:
time the session information is as follows:
0x2373470: proto=tcpv4 src=127.0.0.1:39513 fe=fe_api be=node2
srv=def ts=08 age=1s calls=3 rq[f=848000h,i=0,an=00h,rx=14m58s,wx=,ax=]
rp[f=8004c020h,i=0,an=00h,rx=,wx=14m58s,ax=] s0=[7,0h,fd=6,ex=]
s1=[7,18h,fd=7,ex=] exp=14m58s
rp has set the CF_SHUTR state, next, the client sends the fin package,
session information is as follows:
0x2373470: proto=tcpv4 src=127.0.0.1:39513 fe=fe_api be=node2
srv=def ts=08 age=38s calls=4 rq[f=84a020h,i=0,an=00h,rx=,wx=,ax=]
rp[f=8004c020h,i=0,an=00h,rx=1m11s,wx=14m21s,ax=] s0=[7,0h,fd=6,ex=]
s1=[9,10h,fd=7,ex=] exp=1m11s
After waiting 90s, session information is as follows:
0x2373470: proto=tcpv4 src=127.0.0.1:39513 fe=fe_api be=node2
srv=def ts=04 age=4m11s calls=718074391 rq[f=84a020h,i=0,an=00h,rx=,wx=,ax=]
rp[f=8004c020h,i=0,an=00h,rx=?,wx=10m49s,ax=] s0=[7,0h,fd=6,ex=]
s1=[9,10h,fd=7,ex=] exp=? run(nice=0)
cpu information:
6899 root 20 0 112224 21408 4260 R 100.0 0.7 3:04.96 haproxy
Buffering is set to ensure that there is data in the haproxy buffer, and haproxy
can receive the fin package, set the CF_SHUTR flag, If the CF_SHUTR flag has been
set, The following code does not clear the timeout message, causing cpu 100%:
stream.c:process_stream:
if (unlikely((res->flags & (CF_SHUTR|CF_READ_TIMEOUT)) == CF_READ_TIMEOUT)) {
if (si_b->flags & SI_FL_NOHALF)
si_b->flags |= SI_FL_NOLINGER;
si_shutr(si_b);
}
If you have closed the read, set the read timeout does not make sense.
With or without cf_shutr, read timeout is set:
if (tick_isset(s->be->timeout.serverfin)) {
res->rto = s->be->timeout.serverfin;
res->rex = tick_add(now_ms, res->rto);
}
After discussion on the mailing list, setting half-closed timeouts the
hard way here doesn't make sense. They should be set only at the moment
the shutdown() is performed. It will also solve a special case which was
already reported of some half-closed timeouts not working when the shutw()
is performed directly at the stream-interface layer (no analyser involved).
Since the stream interface layer cannot know the timeout values, we'll have
to store them directly in the stream interface so that they are used upon
shutw(). This patch does this, fixing the problem.
An easier reproducer to validate the fix is to keep the huge buffer and
shorten all timeouts, then call it under tcploop server and client, and
wait 3 seconds to see haproxy run at 100% CPU :
global
tune.bufsize 10485760
listen px
bind :1990
timeout client 90s
timeout server 90s
timeout connect 1s
timeout server-fin 3s
timeout client-fin 3s
server def 127.0.0.1:3333
$ tcploop 3333 L W N20 A P100 F P10000 &
$ tcploop 127.0.0.1:1990 C S10000000 F
This adds 3 new commands to the cli :
enable dynamic-cookie backend <backend> that enables dynamic cookies for a
specified backend
disable dynamic-cookie backend <backend> that disables dynamic cookies for a
specified backend
set dynamic-cookie-key backend <backend> that lets one change the dynamic
cookie secret key, for a specified backend.
When the stream's backend was defined, the request's analyzers flag was always
set to 0 if the stream had no listener. This bug was introduced with the filter
API but never triggered (I think so).
Because of the commit 5820a366, it is now possible to encountered it. For
example, this happens when the trace filter is enabled on a SPOE backend. The
fix is pretty trivial.
This fix must be backported to 1.7.
It is important to defined analyzers (AN_REQ_* and AN_RES_*) in the same order
they are evaluated in process_stream. This order is really important because
during analyzers evaluation, we run them in the order of the lower bit to the
higher one. This way, when an analyzer adds/removes another one during its
evaluation, we know if it is located before or after it. So, when it adds an
analyzer which is located before it, we can switch to it immediately, even if it
has already been called once but removed since.
With the time, and introduction of new analyzers, this order was broken up. the
main problems come from the filter analyzers. We used values not related with
their evaluation order. Furthermore, we used same values for request and response
analyzers.
So, to fix the bug, filter analyzers have been splitted in 2 distinct lists to
have different analyzers for the request channel than those for the response
channel. And of course, we have moved them to the right place.
Some other analyzers have been reordered to respect the evaluation order:
* AN_REQ_HTTP_TARPIT has been moved just before AN_REQ_SRV_RULES
* AN_REQ_PRST_RDP_COOKIE has been moved just before AN_REQ_STICKING_RULES
* AN_RES_STORE_RULES has been moved just after AN_RES_WAIT_HTTP
Note today we have 29 analyzers, all stored into a 32 bits bitfield. So we can
still add 4 more analyzers before having a problem. A good way to fend off the
problem for a while could be to have a different bitfield for request and
response analyzers.
[wt: all of this must be backported to 1.7, and part of it must be backported
to 1.6 and 1.5]
This one now migrates to the general purpose cli.p0 for the proxy pointer,
cli.p1 for the server pointer, and cli.i0 for the proxy's instance if only
one has to be dumped.
[wt: while it could seem suspicious, the preceeding call to
dump_servers_state() indeed flushes the trash in case anything is
emitted. No backport needed though.]
Several CLI commands require a frontend, so let's have a function to
look this one up and prepare the appropriate error message and the
appctx's state in case of failure.
This commit introduces "tcp-request session" rules. These are very
much like "tcp-request connection" rules except that they're processed
after the handshake, so it is possible to consider SSL information and
addresses rewritten by the proxy protocol header in actions. This is
particularly useful to track proxied sources as this was not possible
before, given that tcp-request content rules are processed after each
HTTP request. Similarly it is possible to assign the proxied source
address or the client's cert to a variable.
Instead of repeating the type of the LHS argument (sizeof(struct ...))
in calls to malloc/calloc, we directly use the pointer
name (sizeof(*...)). The following Coccinelle patch was used:
@@
type T;
T *x;
@@
x = malloc(
- sizeof(T)
+ sizeof(*x)
)
@@
type T;
T *x;
@@
x = calloc(1,
- sizeof(T)
+ sizeof(*x)
)
When the LHS is not just a variable name, no change is made. Moreover,
the following patch was used to ensure that "1" is consistently used as
a first argument of calloc, not the last one:
@@
@@
calloc(
+ 1,
...
- ,1
)
Now, filter's configuration (.id, .conf and .ops fields) is stored in the
structure 'flt_conf'. So proxies own a flt_conf list instead of a filter
list. When a filter is attached to a stream, it gets a pointer on its
configuration. This avoids mixing the filter's context (owns by a stream) and
its configuration (owns by a proxy). It also saves 2 pointers per filter
instance.
This new analyzer will be called for each HTTP request/response, before the
parsing of the body. It is identified by AN_FLT_HTTP_HDRS.
Special care was taken about the following condition :
* the frontend is a TCP proxy
* filters are defined in the frontend section
* the selected backend is a HTTP proxy
So, this patch explicitly add AN_FLT_HTTP_HDRS analyzer on the request and the
response channels when the backend is a HTTP proxy and when there are filters
attatched on the stream.
This patch simplifies http_request_forward_body and http_response_forward_body
functions.
HTTP compression has been rewritten to use the filter API. This is more a PoC
than other thing for now. It allocates memory to work. So, if only for that, it
should be rewritten.
In the mean time, the implementation has been refactored to allow its use with
other filters. However, there are limitations that should be respected:
- No filter placed after the compression one is allowed to change input data
(in 'http_data' callback).
- No filter placed before the compression one is allowed to change forwarded
data (in 'http_forward_data' callback).
For now, these limitations are informal, so you should be careful when you use
several filters.
About the configuration, 'compression' keywords are still supported and must be
used to configure the HTTP compression behavior. In absence of a 'filter' line
for the compression filter, it is added in the filter chain when the first
compression' line is parsed. This is an easy way to do when you do not use other
filters. But another filter exists, an error is reported so that the user must
explicitly declare the filter.
For example:
listen tst
...
compression algo gzip
compression offload
...
filter flt_1
filter compression
filter flt_2
...
This patch adds the support of filters in HAProxy. The main idea is to have a
way to "easely" extend HAProxy by adding some "modules", called filters, that
will be able to change HAProxy behavior in a programmatic way.
To do so, many entry points has been added in code to let filters to hook up to
different steps of the processing. A filter must define a flt_ops sutrctures
(see include/types/filters.h for details). This structure contains all available
callbacks that a filter can define:
struct flt_ops {
/*
* Callbacks to manage the filter lifecycle
*/
int (*init) (struct proxy *p);
void (*deinit)(struct proxy *p);
int (*check) (struct proxy *p);
/*
* Stream callbacks
*/
void (*stream_start) (struct stream *s);
void (*stream_accept) (struct stream *s);
void (*session_establish)(struct stream *s);
void (*stream_stop) (struct stream *s);
/*
* HTTP callbacks
*/
int (*http_start) (struct stream *s, struct http_msg *msg);
int (*http_start_body) (struct stream *s, struct http_msg *msg);
int (*http_start_chunk) (struct stream *s, struct http_msg *msg);
int (*http_data) (struct stream *s, struct http_msg *msg);
int (*http_last_chunk) (struct stream *s, struct http_msg *msg);
int (*http_end_chunk) (struct stream *s, struct http_msg *msg);
int (*http_chunk_trailers)(struct stream *s, struct http_msg *msg);
int (*http_end_body) (struct stream *s, struct http_msg *msg);
void (*http_end) (struct stream *s, struct http_msg *msg);
void (*http_reset) (struct stream *s, struct http_msg *msg);
int (*http_pre_process) (struct stream *s, struct http_msg *msg);
int (*http_post_process) (struct stream *s, struct http_msg *msg);
void (*http_reply) (struct stream *s, short status,
const struct chunk *msg);
};
To declare and use a filter, in the configuration, the "filter" keyword must be
used in a listener/frontend section:
frontend test
...
filter <FILTER-NAME> [OPTIONS...]
The filter referenced by the <FILTER-NAME> must declare a configuration parser
on its own name to fill flt_ops and filter_conf field in the proxy's
structure. An exemple will be provided later to make it perfectly clear.
For now, filters cannot be used in backend section. But this is only a matter of
time. Documentation will also be added later. This is the first commit of a long
list about filters.
It is possible to have several filters on the same listener/frontend. These
filters are stored in an array of at most MAX_FILTERS elements (define in
include/types/filters.h). Again, this will be replaced later by a list of
filters.
The filter API has been highly refactored. Main changes are:
* Now, HA supports an infinite number of filters per proxy. To do so, filters
are stored in list.
* Because filters are stored in list, filters state has been moved from the
channel structure to the filter structure. This is cleaner because there is no
more info about filters in channel structure.
* It is possible to defined filters on backends only. For such filters,
stream_start/stream_stop callbacks are not called. Of course, it is possible
to mix frontend and backend filters.
* Now, TCP streams are also filtered. All callbacks without the 'http_' prefix
are called for all kind of streams. In addition, 2 new callbacks were added to
filter data exchanged through a TCP stream:
- tcp_data: it is called when new data are available or when old unprocessed
data are still waiting.
- tcp_forward_data: it is called when some data can be consumed.
* New callbacks attached to channel were added:
- channel_start_analyze: it is called when a filter is ready to process data
exchanged through a channel. 2 new analyzers (a frontend and a backend)
are attached to channels to call this callback. For a frontend filter, it
is called before any other analyzer. For a backend filter, it is called
when a backend is attached to a stream. So some processing cannot be
filtered in that case.
- channel_analyze: it is called before each analyzer attached to a channel,
expects analyzers responsible for data sending.
- channel_end_analyze: it is called when all other analyzers have finished
their processing. A new analyzers is attached to channels to call this
callback. For a TCP stream, this is always the last one called. For a HTTP
one, the callback is called when a request/response ends, so it is called
one time for each request/response.
* 'session_established' callback has been removed. Everything that is done in
this callback can be handled by 'channel_start_analyze' on the response
channel.
* 'http_pre_process' and 'http_post_process' callbacks have been replaced by
'channel_analyze'.
* 'http_start' callback has been replaced by 'http_headers'. This new one is
called just before headers sending and parsing of the body.
* 'http_end' callback has been replaced by 'channel_end_analyze'.
* It is possible to set a forwarder for TCP channels. It was already possible to
do it for HTTP ones.
* Forwarders can partially consumed forwardable data. For this reason a new
HTTP message state was added before HTTP_MSG_DONE : HTTP_MSG_ENDING.
Now all filters can define corresponding callbacks (http_forward_data
and tcp_forward_data). Each filter owns 2 offsets relative to buf->p, next and
forward, to track, respectively, input data already parsed but not forwarded yet
by the filter and parsed data considered as forwarded by the filter. A any time,
we have the warranty that a filter cannot parse or forward more input than
previous ones. And, of course, it cannot forward more input than it has
parsed. 2 macros has been added to retrieve these offets: FLT_NXT and FLT_FWD.
In addition, 2 functions has been added to change the 'next size' and the
'forward size' of a filter. When a filter parses input data, it can alter these
data, so the size of these data can vary. This action has an effet on all
previous filters that must be handled. To do so, the function
'filter_change_next_size' must be called, passing the size variation. In the
same spirit, if a filter alter forwarded data, it must call the function
'filter_change_forward_size'. 'filter_change_next_size' can be called in
'http_data' and 'tcp_data' callbacks and only these ones. And
'filter_change_forward_size' can be called in 'http_forward_data' and
'tcp_forward_data' callbacks and only these ones. The data changes are the
filter responsability, but with some limitation. It must not change already
parsed/forwarded data or data that previous filters have not parsed/forwarded
yet.
Because filters can be used on backends, when we the backend is set for a
stream, we add filters defined for this backend in the filter list of the
stream. But we must only do that when the backend and the frontend of the stream
are not the same. Else same filters are added a second time leading to undefined
behavior.
The HTTP compression code had to be moved.
So it simplifies http_response_forward_body function. To do so, the way the data
are forwarded has changed. Now, a filter (and only one) can forward data. In a
commit to come, this limitation will be removed to let all filters take part to
data forwarding. There are 2 new functions that filters should use to deal with
this feature:
* flt_set_http_data_forwarder: This function sets the filter (using its id)
that will forward data for the specified HTTP message. It is possible if it
was not already set by another filter _AND_ if no data was yet forwarded
(msg->msg_state <= HTTP_MSG_BODY). It returns -1 if an error occurs.
* flt_http_data_forwarder: This function returns the filter id that will
forward data for the specified HTTP message. If there is no forwarder set, it
returns -1.
When an HTTP data forwarder is set for the response, the HTTP compression is
disabled. Of course, this is not definitive.
When performing a soft stop, we used to wake up every proxy's task and
each of their table's task. The problem is that since we're able to stop
proxies and peers not bound to a specific process, we may end up calling
random junk by doing so of the proxy we're waking up is already stopped.
This causes a segfault to appear during soft reloads for old processes
not bound to a peers section if such a section exists in other processes.
Let's only consider proxies that are not stopped when doing this.
This fix must be backported to 1.5 which also has the same issue.
Since commit f83d3fe ("MEDIUM: init: stop any peers section not bound
to the correct process"), it is possible to stop unused peers on certain
processes. The problem is that the pause/resume/stop functions are not
aware of this and will pass a NULL proxy pointer to the respective
functions, resulting in segfaults in unbound processes during soft
restarts.
Properly check that the peers' frontend is still valid before calling
them.
This bug also affects 1.5 so the fix must be backported. Note that this
fix is not enough to completely get rid of the segfault, the next one
is needed as well.
This patch adds a new RFC5424-specific log-format for the structured-data
that is automatically send by __send_log() when the sender is in RFC5424
mode.
A new statement "log-format-sd" should be used in order to set log-format
for the structured-data part in RFC5424 formatted syslog messages.
Example:
log-format-sd [exampleSDID@1234\ bytes=\"%B\"\ status=\"%ST\"]
function proxy_find_best_match can update the caller by updating an int
provided in argument.
For now, proxy_find_best_match hardcode bit values 0x01, 0x02 and 0x04,
which is not understandable when reading a code exploiting them.
This patch defines 3 macros with a more explicit wording, so further
reading of a code exploiting the magic bit values will be understandable
more easily.
This patch adds a new keyword called "declare". This keyword
allow to declare some capture slots in requests and response.
It is useful for sharing capture between frontend and backends.
This function tries to spot a proxy by its name, ID and type, and
in case some elements don't match, it tries to determine which ones
could be ignored and reports which ones were ignored so that the
caller can decide whether or not it wants to pick this proxy. This
will be used for maintaining the status across reloads where the
config might have changed a bit.
It does the same as the other one except that it only focuses on the
numeric ID and the capabilities. It's used by proxy_find_by_name()
for numeric names.
Now that we can't have duplicate proxies with similar capabilities, we
can remove some painful check. The first one is the check that made the
lookup function return NULL when a duplicate is found, as it prevented
it from being used in the config parser to detect duplicates.
First, findproxy() was renamed proxy_find_by_name() so that its explicit
that a name is required for the lookup. Second, we give this function
the ability to search for tables if needed. Third we now provide inline
wrappers to pass the appropriate PR_CAP_* flags and to explicitly look
up a frontend, backend or table.
It is sometimes desirable to wait for the body of an HTTP request before
taking a decision. This is what is being done by "balance url_param" for
example. The first use case is to buffer requests from slow clients before
connecting to the server. Another use case consists in taking the routing
decision based on the request body's contents. This option placed in a
frontend or backend forces the HTTP processing to wait until either the whole
body is received, or the request buffer is full, or the first chunk is
complete in case of chunked encoding. It can have undesired side effects with
some applications abusing HTTP by expecting unbufferred transmissions between
the frontend and the backend, so this should definitely not be used by
default.
Note that it would not work for the response because we don't reset the
message state before starting to forward. For the response we need to
1) reset the message state to MSG_100_SENT or BODY , and 2) to reset
body_len in case of chunked encoding to avoid counting it twice.
Now this one is dynamically allocated. It means that 280 bytes of memory
are saved per TCP stream, but more importantly that it will become
possible to remove the l7 pointer from fetches and converters since
it will be deduced from the stream and will support being null.
A lot of care was taken because it's easy to forget a test somewhere,
and the previous code used to always trust s->txn for being valid, but
all places seem to have been visited.
All HTTP fetch functions check the txn first so we shouldn't have any
issue there even when called from TCP. When branching from a TCP frontend
to an HTTP backend, the txn is properly allocated at the same time as the
hdr_idx.
Just like for the listener, the frontend is session-wide so let's move
it to the session. There are a lot of places which were changed but the
changes are minimal in fact.
With HTTP/2, we'll have to support multiplexed streams. A stream is in
fact the largest part of what we currently call a session, it has buffers,
logs, etc.
In order to catch any error, this commit removes any reference to the
struct session and tries to rename most "session" occurrences in function
names to "stream" and "sess" to "strm" when that's related to a session.
The files stream.{c,h} were added and session.{c,h} removed.
The session will be reintroduced later and a few parts of the stream
will progressively be moved overthere. It will more or less contain
only what we need in an embryonic session.
Sample fetch functions and converters will have to change a bit so
that they'll use an L5 (session) instead of what's currently called
"L4" which is in fact L6 for now.
Once all changes are completed, we should see approximately this :
L7 - http_txn
L6 - stream
L5 - session
L4 - connection | applet
There will be at most one http_txn per stream, and a same session will
possibly be referenced by multiple streams. A connection will point to
a session and to a stream. The session will hold all the information
we need to keep even when we don't yet have a stream.
Some more cleanup is needed because some code was already far from
being clean. The server queue management still refers to sessions at
many places while comments talk about connections. This will have to
be cleaned up once we have a server-side connection pool manager.
Stream flags "SN_*" still need to be renamed, it doesn't seem like
any of them will need to move to the session.
The channels were pointers to outside structs and this is not needed
anymore since the buffers have moved, but this complicates operations.
Move them back into the session so that both channels and stream interfaces
are always allocated for a session. Some places (some early sample fetch
functions) used to validate that a channel was NULL prior to dereferencing
it. Now instead we check if chn->buf is NULL and we force it to remain NULL
until the channel is initialized.
Commit 179085c ("MEDIUM: http: move Connection header processing earlier")
introduced a regression : the backend's HTTP mode is not considered anymore
when setting the session's HTTP mode, because wait_for_request() is only
called once, when the frontend receives the request (or when the frontend
is in TCP mode, when the backend receives the request).
The net effect is that in some situations when the frontend and the backend
do not work in the same mode (eg: keep-alive vs close), the backend's mode
is ignored.
This patch moves all that processing to a dedicated function, which is
called from the original place, as well as from session_set_backend()
when switching from an HTTP frontend to an HTTP backend in different
modes.
This fix must be backported to 1.5.
Twice in a week I found people were surprized by a "conditional timeout" not
being respected, because they add "if <cond>" after a timeout, and since
they don't see any error nor read the doc, the expect it to work. Let's
make the timeout parser reject extra arguments to avoid these situations.
