In order for HTTP/2 not to eat too much memory, we'll have to support
on-the-fly buffer allocation, since most streams will have an empty
request buffer at some point. Supporting allocation on the fly means
being able to sleep inside I/O callbacks if a buffer is not available.
Till now, the I/O callbacks were called from two locations :
- when processing the cached events
- when processing the polled events from the poller
This change cleans up the design a bit further than what was started in
1.5. It now ensures that we never call any iocb from the poller itself
and that instead, events learned by the poller are put into the cache.
The benefit is important in terms of stability : we don't have to care
anymore about the risk that new events are added into the poller while
processing its events, and we're certain that updates are processed at
a single location.
To achieve this, we now modify all the fd_* functions so that instead of
creating updates, they add/remove the fd to/from the cache depending on
its state, and only create an update when the polling status reaches a
state where it will have to change. Since the pollers make use of these
functions to notify readiness (using fd_may_recv/fd_may_send), the cache
is always up to date with the poller.
Creating updates only when the polling status needs to change saves a
significant amount of work for the pollers : a benchmark showed that on
a typical TCP proxy test, the amount of updates per connection dropped
from 11 to 1 on average. This also means that the update list is smaller
and has more chances of not thrashing too many CPU cache lines. The first
observed benefit is a net 2% performance gain on the connection rate.
A second benefit is that when a connection is accepted, it's only when
we're processing the cache, and the recv event is automatically added
into the cache *after* the current one, resulting in this event to be
processed immediately during the same loop. Previously we used to have
a second run over the updates to detect if new events were added to
catch them before waking up tasks.
The next gain will be offered by the next steps on this subject consisting
in implementing an I/O queue containing all cached events ordered by priority
just like the run queue, and to be able to leave some events pending there
as long as needed. That will allow us *not* to perform some FD processing
if it's not the proper time for this (typically keep waiting for a buffer
to be allocated if none is available for an recv()). And by only processing
a small bunch of them, we'll allow priorities to take place even at the I/O
level.
As a result of this change, functions fd_alloc_or_release_cache_entry()
and fd_process_polled_events() have disappeared, and the code dedicated
to checking for new fd events after the callback during the poll() loop
was removed as well. Despite the patch looking large, it's mostly a
change of what function is falled upon fd_*() and almost nothing was
added.
This patch makes it possible to create binds and servers in separate
namespaces. This can be used to proxy between multiple completely independent
virtual networks (with possibly overlapping IP addresses) and a
non-namespace-aware proxy implementation that supports the proxy protocol (v2).
The setup is something like this:
net1 on VLAN 1 (namespace 1) -\
net2 on VLAN 2 (namespace 2) -- haproxy ==== proxy (namespace 0)
net3 on VLAN 3 (namespace 3) -/
The proxy is configured to make server connections through haproxy and sending
the expected source/target addresses to haproxy using the proxy protocol.
The network namespace setup on the haproxy node is something like this:
= 8< =
$ cat setup.sh
ip netns add 1
ip link add link eth1 type vlan id 1
ip link set eth1.1 netns 1
ip netns exec 1 ip addr add 192.168.91.2/24 dev eth1.1
ip netns exec 1 ip link set eth1.$id up
...
= 8< =
= 8< =
$ cat haproxy.cfg
frontend clients
bind 127.0.0.1:50022 namespace 1 transparent
default_backend scb
backend server
mode tcp
server server1 192.168.122.4:2222 namespace 2 send-proxy-v2
= 8< =
A bind line creates the listener in the specified namespace, and connections
originating from that listener also have their network namespace set to
that of the listener.
A server line either forces the connection to be made in a specified
namespace or may use the namespace from the client-side connection if that
was set.
For more documentation please read the documentation included in the patch
itself.
Signed-off-by: KOVACS Tamas <ktamas@balabit.com>
Signed-off-by: Sarkozi Laszlo <laszlo.sarkozi@balabit.com>
Signed-off-by: KOVACS Krisztian <hidden@balabit.com>
pcre_study() has been around long before JIT has been added. It also seems to
affect the performance in some cases (positive).
Below I've attached some test restults. The test is based on
http://sljit.sourceforge.net/regex_perf.html (see bottom). It has been modified
to just test pcre_study vs. no pcre_study. Note: This test does not try to
match specific header it's instead run over a larger text with more and less
complex patterns to make the differences more clear.
% ./runtest
'mark.txt' loaded. (Length: 19665221 bytes)
-----------------
Regex: 'Twain'
[pcre-nostudy] time: 14 ms (2388 matches)
[pcre-study] time: 21 ms (2388 matches)
-----------------
Regex: '^Twain'
[pcre-nostudy] time: 109 ms (100 matches)
[pcre-study] time: 109 ms (100 matches)
-----------------
Regex: 'Twain$'
[pcre-nostudy] time: 14 ms (127 matches)
[pcre-study] time: 16 ms (127 matches)
-----------------
Regex: 'Huck[a-zA-Z]+|Finn[a-zA-Z]+'
[pcre-nostudy] time: 695 ms (83 matches)
[pcre-study] time: 26 ms (83 matches)
-----------------
Regex: 'a[^x]{20}b'
[pcre-nostudy] time: 90 ms (12495 matches)
[pcre-study] time: 91 ms (12495 matches)
-----------------
Regex: 'Tom|Sawyer|Huckleberry|Finn'
[pcre-nostudy] time: 1236 ms (3015 matches)
[pcre-study] time: 34 ms (3015 matches)
-----------------
Regex: '.{0,3}(Tom|Sawyer|Huckleberry|Finn)'
[pcre-nostudy] time: 5696 ms (3015 matches)
[pcre-study] time: 5655 ms (3015 matches)
-----------------
Regex: '[a-zA-Z]+ing'
[pcre-nostudy] time: 1290 ms (95863 matches)
[pcre-study] time: 1167 ms (95863 matches)
-----------------
Regex: '^[a-zA-Z]{0,4}ing[^a-zA-Z]'
[pcre-nostudy] time: 136 ms (4507 matches)
[pcre-study] time: 134 ms (4507 matches)
-----------------
Regex: '[a-zA-Z]+ing$'
[pcre-nostudy] time: 1334 ms (5360 matches)
[pcre-study] time: 1214 ms (5360 matches)
-----------------
Regex: '^[a-zA-Z ]{5,}$'
[pcre-nostudy] time: 198 ms (26236 matches)
[pcre-study] time: 197 ms (26236 matches)
-----------------
Regex: '^.{16,20}$'
[pcre-nostudy] time: 173 ms (4902 matches)
[pcre-study] time: 175 ms (4902 matches)
-----------------
Regex: '([a-f](.[d-m].){0,2}[h-n]){2}'
[pcre-nostudy] time: 1242 ms (68621 matches)
[pcre-study] time: 690 ms (68621 matches)
-----------------
Regex: '([A-Za-z]awyer|[A-Za-z]inn)[^a-zA-Z]'
[pcre-nostudy] time: 1215 ms (675 matches)
[pcre-study] time: 952 ms (675 matches)
-----------------
Regex: '"[^"]{0,30}[?!\.]"'
[pcre-nostudy] time: 27 ms (5972 matches)
[pcre-study] time: 28 ms (5972 matches)
-----------------
Regex: 'Tom.{10,25}river|river.{10,25}Tom'
[pcre-nostudy] time: 705 ms (2 matches)
[pcre-study] time: 68 ms (2 matches)
In some cases it's more or less the same but when it's faster than by a huge margin.
It always depends on the pattern, the string(s) to match against etc.
Signed-off-by: Christian Ruppert <c.ruppert@babiel.com>
Lasse Birnbaum Jensen reported an issue when agent checks are used at the same
time as standard healthchecks when SSL is enabled on the server side.
The symptom is that agent checks try to communicate in SSL while it should
manage raw data. This happens because the transport layer is shared between all
kind of checks.
To fix the issue, the transport layer is now stored in each check type,
allowing to use SSL healthchecks when required, while an agent check should
always use the raw_sock implementation.
The fix must be backported to 1.5.
When we're stopping, we're not going to create new tasks anymore, so
let's release the task pool upon each task_free() in order to reduce
memory fragmentation.
Adds global statements 'ssl-default-server-options' and
'ssl-default-bind-options' to force on 'server' and 'bind' lines
some ssl options.
Currently available options are 'no-sslv3', 'no-tlsv10', 'no-tlsv11',
'no-tlsv12', 'force-sslv3', 'force-tlsv10', 'force-tlsv11',
'force-tlsv12', and 'no-tls-tickets'.
Example:
global
ssl-default-server-options no-sslv3
ssl-default-bind-options no-sslv3
This converter escapes string to use it as json/ascii escaped string.
It can read UTF-8 with differents behavior on errors and encode it in
json/ascii.
json([<input-code>])
Escapes the input string and produces an ASCII ouput string ready to use as a
JSON string. The converter tries to decode the input string according to the
<input-code> parameter. It can be "ascii", "utf8", "utf8s", "utf8"" or
"utf8ps". The "ascii" decoder never fails. The "utf8" decoder detects 3 types
of errors:
- bad UTF-8 sequence (lone continuation byte, bad number of continuation
bytes, ...)
- invalid range (the decoded value is within a UTF-8 prohibited range),
- code overlong (the value is encoded with more bytes than necessary).
The UTF-8 JSON encoding can produce a "too long value" error when the UTF-8
character is greater than 0xffff because the JSON string escape specification
only authorizes 4 hex digits for the value encoding. The UTF-8 decoder exists
in 4 variants designated by a combination of two suffix letters : "p" for
"permissive" and "s" for "silently ignore". The behaviors of the decoders
are :
- "ascii" : never fails ;
- "utf8" : fails on any detected errors ;
- "utf8s" : never fails, but removes characters corresponding to errors ;
- "utf8p" : accepts and fixes the overlong errors, but fails on any other
error ;
- "utf8ps" : never fails, accepts and fixes the overlong errors, but removes
characters corresponding to the other errors.
This converter is particularly useful for building properly escaped JSON for
logging to servers which consume JSON-formated traffic logs.
Example:
capture request header user-agent len 150
capture request header Host len 15
log-format {"ip":"%[src]","user-agent":"%[capture.req.hdr(1),json]"}
Input request from client 127.0.0.1:
GET / HTTP/1.0
User-Agent: Very "Ugly" UA 1/2
Output log:
{"ip":"127.0.0.1","user-agent":"Very \"Ugly\" UA 1\/2"}
Commit 179085c ("MEDIUM: http: move Connection header processing earlier")
introduced a regression : the backend's HTTP mode is not considered anymore
when setting the session's HTTP mode, because wait_for_request() is only
called once, when the frontend receives the request (or when the frontend
is in TCP mode, when the backend receives the request).
The net effect is that in some situations when the frontend and the backend
do not work in the same mode (eg: keep-alive vs close), the backend's mode
is ignored.
This patch moves all that processing to a dedicated function, which is
called from the original place, as well as from session_set_backend()
when switching from an HTTP frontend to an HTTP backend in different
modes.
This fix must be backported to 1.5.
A config where a tcp-request rule appears after an http-request rule
might seem valid but it is not. So let's report a warning about this
since this case is hard to detect by the naked eye.
Commit bb2e669 ("BUG/MAJOR: http: correctly rewind the request body
after start of forwarding") was incorrect/incomplete. It used to rely on
CF_READ_ATTACHED to stop updating msg->sov once data start to leave the
buffer, but this is unreliable because since commit a6eebb3 ("[BUG]
session: clear BF_READ_ATTACHED before next I/O") merged in 1.5-dev1,
this flag is only ephemeral and is cleared once all analysers have
seen it. So we can start updating msg->sov again each time we pass
through this place with new data. With a sufficiently large amount of
data, it is possible to make msg->sov wrap and validate the if()
condition at the top, causing the buffer to advance by about 2GB and
crash the process.
Note that the offset cannot be controlled by the attacker because it is
a sum of millions of small random sizes depending on how many bytes were
read by the server and how many were left in the buffer, only because
of the speed difference between reading and writing. Also, nothing is
written, the invalid pointer resulting from this operation is only read.
Many thanks to James Dempsey for reporting this bug and to Chris Forbes for
narrowing down the faulty area enough to make its root cause analysable.
This fix must be backported to haproxy 1.5.
Sometimes it would be convenient to have a log counter so that from a log
server we know whether some logs were lost or not. The frontend's log counter
serves exactly this purpose. It's incremented each time a traffic log is
produced. If a log is disabled using "http-request set-log-level silent",
the counter will not be incremented. However, admin logs are not accounted
for. Also, if logs are filtered out before being sent to the server because
of a minimum level set on the log line, the counter will be increased anyway.
The counter is 32-bit, so it will wrap, but that's not an issue considering
that 4 billion logs are rarely in the same file, let alone close to each
other.
Just by moving a few struct members around, we can avoid 32-bit holes
between 64-bit pointers and shrink the struct size by 48 bytes. That's
not huge but that's for free, so let's do it.
There are two sample commands to get information about the presence of a
client certificate.
ssl_fc_has_crt is true if there is a certificate present in the current
connection
ssl_c_used is true if there is a certificate present in the session.
If a session has stopped and resumed, then ssl_c_used could be true, while
ssl_fc_has_crt is false.
In the client byte of the TLS TLV of Proxy Protocol V2, there is only one
bit to indicate whether a certificate is present on the connection. The
attached patch adds a second bit to indicate the presence for the session.
This maintains backward compatibility.
[wt: this should be backported to 1.5 to help maintain compatibility
between versions]
Google's boringssl doesn't currently support OCSP, so
disable it if detected.
OCSP support may be reintroduced as per:
https://code.google.com/p/chromium/issues/detail?id=398677
In that case we can simply revert this commit.
Signed-off-by: Lukas Tribus <luky-37@hotmail.com>
If a source file includes proto/server.h twice or more, redefinition errors will
be triggered for such inline functions as server_throttle_rate(),
server_is_draining(), srv_adm_set_maint() and so on. Just move #endif directive
to the end of file to solve this issue.
Signed-off-by: Godbach <nylzhaowei@gmail.com>
Add support for http-request track-sc, similar to what is done in
tcp-request for backends. A new act_prm field was added to HTTP
request rules to store the track params (table, counter). Just
like for TCP rules, the table is resolved while checking for
config validity. The code was mostly copied from the TCP code
with the exception that here we also count the HTTP request count
and rate by hand. Probably that something could be factored out in
the future.
It seems like tracking flags should be improved to mark each hook
which tracks a key so that we can have some check points where to
increase counters of the past if not done yet, a bit like is done
for TRACK_BACKEND.
Some users want to add their own data types to stick tables. We don't
want to use a linked list here for performance reasons, so we need to
continue to use an indexed array. This patch allows one to reserve a
compile-time-defined number of extra data types by setting the new
macro STKTABLE_EXTRA_DATA_TYPES to anything greater than zero, keeping
in mind that anything larger will slightly inflate the memory consumed
by stick tables (not per entry though).
Then calling stktable_register_data_store() with the new keyword will
either register a new keyword or fail if the desired entry was already
taken or the keyword already registered.
Note that this patch does not dictate how the data will be used, it only
offers the possibility to create new keywords and have an index to
reference them in the config and in the tables. The caller will not be
able to use stktable_data_cast() and will have to explicitly cast the
stable pointers to the expected types. It can be used for experimentation
as well.
Daniel Dubovik reported an interesting bug showing that the request body
processing was still not 100% fixed. If a POST request contained short
enough data to be forwarded at once before trying to establish the
connection to the server, we had no way to correctly rewind the body.
The first visible case is that balancing on a header does not always work
on such POST requests since the header cannot be found. But there are even
nastier implications which are that http-send-name-header would apply to
the wrong location and possibly even affect part of the request's body
due to an incorrect rewinding.
There are two options to fix the problem :
- first one is to force the HTTP_MSG_F_WAIT_CONN flag on all hash-based
balancing algorithms and http-send-name-header, but there's always a
risk that any new algorithm forgets to set it ;
- the second option is to account for the amount of skipped data before
the connection establishes so that we always know the position of the
request's body relative to the buffer's origin.
The second option is much more reliable and fits very well in the spirit
of the past changes to fix forwarding. Indeed, at the moment we have
msg->sov which points to the start of the body before headers are forwarded
and which equals zero afterwards (so it still points to the start of the
body before forwarding data). A minor change consists in always making it
point to the start of the body even after data have been forwarded. It means
that it can get a negative value (so we need to change its type to signed)..
In order to avoid wrapping, we only do this as long as the other side of
the buffer is not connected yet.
Doing this definitely fixes the issues above for the requests. Since the
response cannot be rewound we don't need to perform any change there.
This bug was introduced/remained unfixed in 1.5-dev23 so the fix must be
backported to 1.5.
Currently we have stktable_fetch_key() which fetches a sample according
to an expression and returns a stick table key, but we also need a function
which does only the second half of it from a known sample. So let's cut the
function in two and introduce smp_to_stkey() to perform this lookup. The
first function was adapted to make use of it in order to avoid code
duplication.
When we were generating a hash, it was done using an unsigned long. When the hash was used
to select a backend, it was sent as an unsigned int. This made it difficult to predict which
backend would be selected.
This patch updates get_hash, and the hash methods to use an unsigned int, to remain consistent
throughout the codebase.
This fix should be backported to 1.5 and probably in part to 1.4.
Abstract namespace sockets ignore the shutdown() call and do not make
it possible to temporarily stop listening. The issue it causes is that
during a soft reload, the new process cannot bind, complaining that the
address is already in use.
This change registers a new pause() function for unix sockets and
completely unbinds the abstract ones since it's possible to rebind
them later. It requires the two previous patches as well as preceeding
fixes.
This fix should be backported into 1.5 since the issue apperas there.
In order to fix the abstact socket pause mechanism during soft restarts,
we'll need to proceed differently depending on the socket protocol. The
pause_listener() function already supports some protocol-specific handling
for the TCP case.
This commit makes this cleaner by adding a new ->pause() function to the
protocol struct, which, if defined, may be used to pause a listener of a
given protocol.
For now, only TCP has been adapted, with the specific code moved from
pause_listener() to tcp_pause_listener().
With all the goodies supported by logformat, people find that the limit
of 1024 chars for log lines is too short. Some servers do not support
larger lines and can simply drop them, so changing the default value is
not always the best choice.
This patch takes a different approach. Log line length is specified per
log server on the "log" line, with a value between 80 and 65535. That
way it's possibly to satisfy all needs, even with some fat local servers
and small remote ones.
This value was set in log.h without any #ifndef around, so when one
wanted to change it, a patch was needed. Let's move it to defaults.h
with the usual #ifndef so that it's easier to change it.
stktable_fetch_key() does not indicate whether it returns NULL because
the input sample was not found or because it's unstable. It causes trouble
with track-sc* rules. Just like with sample_fetch_string(), we want it to
be able to give more information to the caller about what it found. Thus,
now we use the pointer to a sample passed by the caller, and fill it with
the information we have about the sample. That way, even if we return NULL,
the caller has the ability to check whether a sample was found and if it is
still changing or not.
'ssl_sock_get_common_name' applied to a connection was also renamed
'ssl_sock_get_remote_common_name'. Currently, this function is only used
with protocol PROXYv2 to retrieve the client certificate's common name.
A further usage could be to retrieve the server certificate's common name
on an outgoing connection.
The support is all based on static responses. This doesn't add any
request / response logic to HAProxy, but allows a way to update
information through the socket interface.
Currently certificates specified using "crt" or "crt-list" on "bind" lines
are loaded as PEM files.
For each PEM file, haproxy checks for the presence of file at the same path
suffixed by ".ocsp". If such file is found, support for the TLS Certificate
Status Request extension (also known as "OCSP stapling") is automatically
enabled. The content of this file is optional. If not empty, it must contain
a valid OCSP Response in DER format. In order to be valid an OCSP Response
must comply with the following rules: it has to indicate a good status,
it has to be a single response for the certificate of the PEM file, and it
has to be valid at the moment of addition. If these rules are not respected
the OCSP Response is ignored and a warning is emitted. In order to identify
which certificate an OCSP Response applies to, the issuer's certificate is
necessary. If the issuer's certificate is not found in the PEM file, it will
be loaded from a file at the same path as the PEM file suffixed by ".issuer"
if it exists otherwise it will fail with an error.
It is possible to update an OCSP Response from the unix socket using:
set ssl ocsp-response <response>
This command is used to update an OCSP Response for a certificate (see "crt"
on "bind" lines). Same controls are performed as during the initial loading of
the response. The <response> must be passed as a base64 encoded string of the
DER encoded response from the OCSP server.
Example:
openssl ocsp -issuer issuer.pem -cert server.pem \
-host ocsp.issuer.com:80 -respout resp.der
echo "set ssl ocsp-response $(base64 -w 10000 resp.der)" | \
socat stdio /var/run/haproxy.stat
This feature is automatically enabled on openssl 0.9.8h and above.
This work was performed jointly by Dirkjan Bussink of GitHub and
Emeric Brun of HAProxy Technologies.
The pcreposix layer (in the pcre projetc) execute strlen to find
thlength of the string. When we are using the function "regex_exex*2",
the length is used to add a final \0, when pcreposix is executed a
strlen is executed to compute the length.
If we are using a native PCRE api, the length is provided as an
argument, and these operations disappear.
This is useful because PCRE regex are more used than POSIC regex.
This patch remove all references of standard regex in haproxy. The last
remaining references are only in the regex.[ch] files.
In the file src/checks.c, the original function uses a "pmatch" array.
In fact this array is unused. This patch remove it.
This patchs rename the "regex_exec" to "regex_exec2". It add a new
"regex_exec", "regex_exec_match" and "regex_exec_match2" function. This
function can match regex and return array containing matching parts.
Otherwise, this function use the compiled method (JIT or PCRE or POSIX).
JIT require a subject with length. PCREPOSIX and native POSIX regex
require a null terminted subject. The regex_exec* function are splited
in two version. The first version take a null terminated string, but it
execute strlen() on the subject if it is compiled with JIT. The second
version (terminated by "2") take the subject and the length. This
version adds a null character in the subject if it is compiled with
PCREPOSIX or native POSIX functions.
The documentation of posix regex and pcreposix says that the function
returns 0 if the string matche otherwise it returns REG_NOMATCH. The
REG_NOMATCH macro take the value 1 with posix regex and the value 17
with the pcreposix. The documentaion of the native pcre API (used with
JIT) returns a negative number if no match, otherwise, it returns 0 or a
positive number.
This patch fix also the return codes of the regex_exec* functions. Now,
these function returns true if the string match, otherwise it returns
false.
This patch adds two new actions to http-request and http-response rulesets :
- replace-header : replace a whole header line, suited for headers
which might contain commas
- replace-value : replace a single header value, suited for headers
defined as lists.
The match consists in a regex, and the replacement string takes a log-format
and supports back-references.
Using the last rate counters, we now compute the queue, connect, response
and total times per server and per backend with a 95% accuracy over the last
1024 samples. The operation is cheap so we don't need to condition it.
While the current functions report average event counts per period, we are
also interested in average values per event. For this we use a different
method. The principle is to rely on a long tail which sums the new value
with a fraction of the previous value, resulting in a sliding window of
infinite length depending on the precision we're interested in.
The idea is that we always keep (N-1)/N of the sum and add the new sampled
value. The sum over N values can be computed with a simple program for a
constant value 1 at each iteration :
N
,---
\ N - 1 e - 1
> ( --------- )^x ~= N * -----
/ N e
'---
x = 1
Note: I'm not sure how to demonstrate this but at least this is easily
verified with a simple program, the sum equals N * 0.632120 for any N
moderately large (tens to hundreds).
Inserting a constant sample value V here simply results in :
sum = V * N * (e - 1) / e
But we don't want to integrate over a small period, but infinitely. Let's
cut the infinity in P periods of N values. Each period M is exactly the same
as period M-1 with a factor of ((N-1)/N)^N applied. A test shows that given a
large N :
N - 1 1
( ------- )^N ~= ---
N e
Our sum is now a sum of each factor times :
N*P P
,--- ,---
\ N - 1 e - 1 \ 1
> v ( --------- )^x ~= VN * ----- * > ---
/ N e / e^x
'--- '---
x = 1 x = 0
For P "large enough", in tests we get this :
P
,---
\ 1 e
> --- ~= -----
/ e^x e - 1
'---
x = 0
This simplifies the sum above :
N*P
,---
\ N - 1
> v ( --------- )^x = VN
/ N
'---
x = 1
So basically by summing values and applying the last result an (N-1)/N factor
we just get N times the values over the long term, so we can recover the
constant value V by dividing by N.
A value added at the entry of the sliding window of N values will thus be
reduced to 1/e or 36.7% after N terms have been added. After a second batch,
it will only be 1/e^2, or 13.5%, and so on. So practically speaking, each
old period of N values represents only a quickly fading ratio of the global
sum :
period ratio
1 36.7%
2 13.5%
3 4.98%
4 1.83%
5 0.67%
6 0.25%
7 0.09%
8 0.033%
9 0.012%
10 0.0045%
So after 10N samples, the initial value has already faded out by a factor of
22026, which is quite fast. If the sliding window is 1024 samples wide, it
means that a sample will only count for 1/22k of its initial value after 10k
samples went after it, which results in half of the value it would represent
using an arithmetic mean. The benefit of this method is that it's very cheap
in terms of computations when N is a power of two. This is very well suited
to record response times as large values will fade out faster than with an
arithmetic mean and will depend on sample count and not time.
Demonstrating all the above assumptions with maths instead of a program is
left as an exercise for the reader.
qstr() and cstr() will be used to quote-encode strings. The first one
does it unconditionally. The second one is aimed at CSV files where the
quote-encoding is only needed when the field contains a quote or a comma.
This helper is similar to addr_to_str but
tries to convert the port rather than the address
of a struct sockaddr_storage.
This is in preparation for supporting
an external agent check.
Signed-off-by: Simon Horman <horms@verge.net.au>
This is in order to simplify the PPv2 header parsing code to look more
like the one provided as an example in the spec. No code change was
performed beyond just merging the proxy_addr union into the proxy_hdr_v2
struct.
This patch adds support for captures with no header name. The purpose
is to allow extra captures to be defined and logged along with the
header captures.
When no static DH parameters are specified, this patch makes haproxy
use standardized (rfc 2409 / rfc 3526) DH parameters with prime lenghts
of 1024, 2048, 4096 or 8192 bits for DHE key exchange. The size of the
temporary/ephemeral DH key is computed as the minimum of the RSA/DSA server
key size and the value of a new option named tune.ssl.default-dh-param.
Dmitry Sivachenko reported that "uint" doesn't build on FreeBSD 10.
On Linux it's defined in sys/types.h and indicated as "old". Just
get rid of the very few occurrences.
One important aspect of SSL performance tuning is the cache size,
but there's no metric to know whether it's large enough or not. This
commit introduces two counters, one for the cache lookups and another
one for cache misses. These counters are reported on "show info" on
the stats socket. This way, it suffices to see the cache misses
counter constantly grow to know that a larger cache could possibly
help.
It's commonly needed to know how many SSL asymmetric keys are computed
per second on either side (frontend or backend), and to know the SSL
session reuse ratio. Now we compute these values and report them in
"show info".
Currently exp_replace() (which is used in reqrep/reqirep) is
vulnerable to a buffer overrun. I have been able to reproduce it using
the attached configuration file and issuing the following command:
wget -O - -S -q http://localhost:8000/`perl -e 'print "a"x4000'`/cookie.php
Str was being checked only in in while (str) and it was possible to
read past that when more than one character was being accessed in the
loop.
WT:
Note that this bug is only marked MEDIUM because configurations
capable of triggering this bug are very unlikely to exist at all due
to the fact that most rewrites consist in static string additions
that largely fit into the reserved area (8kB by default).
This fix should also be backported to 1.4 and possibly even 1.3 since
it seems to have been present since 1.1 or so.
Config:
-------
global
maxconn 500
stats socket /tmp/haproxy.sock mode 600
defaults
timeout client 1000
timeout connect 5000
timeout server 5000
retries 1
option redispatch
listen stats
bind :8080
mode http
stats enable
stats uri /stats
stats show-legends
listen tcp_1
bind :8000
mode http
maxconn 400
balance roundrobin
reqrep ^([^\ :]*)\ /(.*)/(.*)\.php(.*) \1\ /\3.php?arg=\2\2\2\2\2\2\2\2\2\2\2\2\2\4
server srv1 127.0.0.1:9000 check port 9000 inter 1000 fall 1
server srv2 127.0.0.1:9001 check port 9001 inter 1000 fall 1
