It was moved without any change, however many callers didn't need it at
all. This was a consequence of the split of proto_http.c into several
parts that resulted in many locations to still reference it.
Just some minor reordering, and the usual cleanup of call places for
those which didn't need it. We don't include the whole tools.h into
stats-t anymore but just tools-t.h.
Initially it looked like this could have been placed into auth.h or
stats.h but it's not the case as it's what makes the link between them
and the HTTP layer. However the file needed to be split in two. Quite
a number of call places were dropped because these were mostly leftovers
from the early days where the stats and cli were packed together.
The files were moved almost as-is, just dropping arg-t and auth-t from
acl-t but keeping arg-t in acl.h. It was useful to revisit the call places
since a handful of files used to continue to include acl.h while they did
not need it at all. Struct stream was only made a forward declaration
since not otherwise needed.
The stktable_types[] array declaration was moved to the main file as
it had nothing to do in the types. A few declarations were reordered
in the types file so that defines were before the structs. Thread-t
was added since there are a few __decl_thread(). The loss of peers.h
revealed that cfgparse-listen needed it.
The cfg_peers external declaration was moved to the main file instead
of the type one. A few types were still missing from the proto, causing
warnings in the functions prototypes (proxy, stick_table).
All includes that were not absolutely necessary were removed because
checks.h happens to very often be part of dependency loops. A warning
was added about this in check-t.h. The fields, enums and structs were
a bit tidied because it's particularly tedious to find anything there.
It would make sense to split this in two or more files (at least
extract tcp-checks).
The file was renamed to the singular because it was one of the rare
exceptions to have an "s" appended to its name compared to the struct
name.
The type file is becoming a mess, half of it is for the proxy protocol,
another good part describes conn_streams and mux ops, it would deserve
being split again. At least it was reordered so that elements are easier
to find, with the PP-stuff left at the end. The MAX_SEND_FD macro was moved
to compat.h as it's said to be the value for Linux.
The TASK_IS_TASKLET() macro was moved to the proto file instead of the
type one. The proto part was a bit reordered to remove a number of ugly
forward declaration of static inline functions. About a tens of C and H
files had their dependency dropped since they were not using anything
from task.h.
global.h was one of the messiest files, it has accumulated tons of
implicit dependencies and declares many globals that make almost all
other file include it. It managed to silence a dependency loop between
server.h and proxy.h by being well placed to pre-define the required
structs, forcing struct proxy and struct server to be forward-declared
in a significant number of files.
It was split in to, one which is the global struct definition and the
few macros and flags, and the rest containing the functions prototypes.
The UNIX_MAX_PATH definition was moved to compat.h.
This one is particularly tricky to move because everyone uses it
and it depends on a lot of other types. For example it cannot include
arg-t.h and must absolutely only rely on forward declarations to avoid
dependency loops between vars -> sample_data -> arg. In order to address
this one, it would be nice to split the sample_data part out of sample.h.
The file mostly contained struct definitions but there was also a
variable export. Most of the stuff currently lies in checks.h and
should definitely move here!
The STATS_DEFAULT_REALM and STATS_DEFAULT_URI were moved to defaults.h.
It was required to include types/pattern.h and types/sample.h since they
are mentioned in function prototypes.
It would be wise to merge this with uri_auth.h later.
List.h was missing for LIST_ADDQ(). A few unneeded includes of action.h
were removed from certain files.
This one still relies on applet.h and stick-table.h.
And also rename standard.c to tools.c. The original split between
tools.h and standard.h dates from version 1.3-dev and was mostly an
accident. This patch moves the files back to what they were expected
to be, and takes care of not changing anything else. However this
time tools.h was split between functions and types, because it contains
a small number of commonly used macros and structures (e.g. name_desc)
which in turn cause the massive list of includes of tools.h to conflict
with the callers.
They remain the ugliest files of the whole project and definitely need
to be cleaned and split apart. A few types are defined there only for
functions provided there, and some parts are even OS-specific and should
move somewhere else, such as the symbol resolution code.
The protocol.h files are pretty low in the dependency and (sadly) used
by some files from common/. Almost nothing was changed except lifting a
few comments.
The type was moved out as it's used by standard.h for netns_entry.
Instead of just being a forward declaration when not used, it's an
empty struct, which makes gdb happier (the resulting stripped executable
is the same).
Now the file is ready to be stored into its final destination. A few
minor reorderings were performed to keep the file properly organized,
making the various sections more visible (cache & lockless).
In addition and to stay consistent, memory.c was renamed to pool.c.
This one is included almost everywhere and used to rely on a few other
.h that are not needed (unistd, stdlib, standard.h). It could possibly
make sense to split it into multiple parts to distinguish operations
performed on timers and the internal time accounting, but at this point
it does not appear much important.
This splits the hathreads.h file into types+macros and functions. Given
that most users of this file used to include it only to get the definition
of THREAD_LOCAL and MAXTHREADS, the bare minimum was placed into thread-t.h
(i.e. types and macros).
All the thread management was left to haproxy/thread.h. It's worth noting
the drop of the trailing "s" in the name, to remove the permanent confusion
that arises between this one and the system implementation (no "s") and the
makefile's option (no "s").
For consistency, src/hathreads.c was also renamed thread.c.
A number of files were updated to only include thread-t which is the one
they really needed.
Some future improvements are possible like replacing empty inlined
functions with macros for the thread-less case, as building at -O0 disables
inlining and causes these ones to be emitted. But this really is cosmetic.
All files that were including one of the following include files have
been updated to only include haproxy/api.h or haproxy/api-t.h once instead:
- common/config.h
- common/compat.h
- common/compiler.h
- common/defaults.h
- common/initcall.h
- common/tools.h
The choice is simple: if the file only requires type definitions, it includes
api-t.h, otherwise it includes the full api.h.
In addition, in these files, explicit includes for inttypes.h and limits.h
were dropped since these are now covered by api.h and api-t.h.
No other change was performed, given that this patch is large and
affects 201 files. At least one (tools.h) was already freestanding and
didn't get the new one added.
When checking the config validity of the http-check rulesets, the test on the
ruleset type is inverted. So a warning about ignored directive is emitted when
the config is valid and omitted when it should be reported.
No backport needed.
In issue #657, Coverity found a bug in the "nameserver" parser for the
resolv.conf when "parse-resolv-conf" is set. What happens is that if an
unparsable address appears on a "nameserver" line, it will destroy the
previously allocated pointer before reporting the warning, then the next
"nameserver" line will dereference it again and wlil cause a crash. If
the faulty nameserver is the last one, it will only be a memory leak.
Let's just make sure we preserve the pointer when handling the error.
The patch also fixes a typo in the warning.
The bug was introduced in 1.9 with commit 44e609bfa ("MINOR: dns:
Implement `parse-resolv-conf` directive") so the fix needs to be backported
up to 1.9 or 2.0.
This fixes OSS Fuzz issue https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=21931.
OSS Fuzz detected a hang on configuration parsing for a 200kB line with a large number of
invalid escape sequences. Most likely due to the amounts of error output generated.
This issue is very minor, because usually generated configurations are to be trusted.
The bug exists since at the very least HAProxy 1.4. The patch may be backported if desired.
During use_backend and use-server post-parsing, if the log-format string used to
specify the backend or the server is just a single string, the log-format string
(a list, internally) is replaced by the string itself. Because the field is an
union, the list is not emptied according to the rules of art. The element, when
released, is not removed from the list. There is no bug, but it is clearly not
obvious and error prone.
This patch should fix#544. The fix for the use_backend post-parsing may be
backported to all stable releases. use-server is static in 2.1 and prior.
HTTP health-checks are now internally based on tcp-checks. Of course all the
configuration parsing of the "http-check" keyword and the httpchk option has
been rewritten. But the main changes is that now, as for tcp-check ruleset, it
is possible to perform several send/expect sequences into the same
health-checks. Thus the connect rule is now also available from HTTP checks, jst
like set-var, unset-var and comment rules.
Because the request defined by the "option httpchk" line is used for the first
request only, it is now possible to set the method, the uri and the version on a
"http-check send" line.
All tcp-check rules are now stored in the globla shared list. The ones created
to parse a specific protocol, for instance redis, are already stored in this
list. Now pure tcp-check rules are also stored in it. The ruleset name is
created using the proxy name and its config file and line. tcp-check rules
declared in a defaults section are also stored this way using "defaults" as
proxy name.
For now, all tcp-check ruleset are stored in a list. But it could be a bit slow
to looks for a specific ruleset with a huge number of backends. So, it could be
a good idea to use a tree instead.
A shared tcp-check ruleset is now created to support ssl-hello check. This way
no extra memory is used if several backends use a ssl-hello check.
The following sequence is used :
tcp-check send-binary SSLV3_CLIENT_HELLO log-format
tcp-check expect rbinary "^1[56]" min-recv 5 \
error-status "L6RSP" tout-status "L6TOUT"
SSLV3_CLIENT_HELLO is a log-format hexa string representing a SSLv3 CLIENT HELLO
packet. It is the same than the one used by the old ssl-hello except the sample
expression "%[date(),htonl,hex]" is used to set the date field.
A global list to tcp-check ruleset can now be used to share common rulesets with
all backends without any duplication. It is mandatory to convert all specific
protocol checks (redis, pgsql...) to tcp-check healthchecks.
To do so, a flag is now attached to each tcp-check ruleset to know if it is a
shared ruleset or not. tcp-check rules defined in a backend are still directly
attached to the proxy and not shared. In addition a second flag is used to know
if the ruleset is inherited from the defaults section.
To allow reusing these blocks without consuming more memory, their list
should be static and share-able accross uses. The head of the list will
be shared as well.
It is thus necessary to extract the head of the rule list from the proxy
itself. Transform it into a pointer instead, that can be easily set to
an external dynamically allocated head.
The options and directives related to the configuration of checks in a backend
may be defined after the servers declarations. So, initialization of the check
of each server must not be performed during configuration parsing, because some
info may be missing. Instead, it must be done during the configuration validity
check.
Thus, callback functions are registered to be called for each server after the
config validity check, one for the server check and another one for the server
agent-check. In addition deinit callback functions are also registered to
release these checks.
This patch should be backported as far as 1.7. But per-server post_check
callback functions are only supported since the 2.1. And the initcall mechanism
does not exist before the 1.9. Finally, in 1.7, the code is totally
different. So the backport will be harder on older versions.
This options is used to force a non-SSL connection to check a SSL server or to
invert a check-ssl option inherited from the default section. The use_ssl field
in the check structure is used to know if a SSL connection must be used
(use_ssl=1) or not (use_ssl=0). The server configuration is used by default.
The problem is that we cannot distinguish the default case (no specific SSL
check option) and the case of an explicit non-SSL check. In both, use_ssl is set
to 0. So the server configuration is always used. For a SSL server, when
no-check-ssl option is set, the check is still performed using a SSL
configuration.
To fix the bug, instead of a boolean value (0=TCP, 1=SSL), we use a ternary value :
* 0 = use server config
* 1 = force SSL
* -1 = force non-SSL
The same is done for the server parameter. It is not really necessary for
now. But it is a good way to know is the server no-ssl option is set.
In addition, the PR_O_TCPCHK_SSL proxy option is no longer used to set use_ssl
to 1 for a check. Instead the flag is directly tested to prepare or destroy the
server SSL context.
This patch should be backported as far as 1.8.
