This patch adds two new variables: fastinter and downinter.
When server state is:
- non-transitionally UP -> inter (no change)
- transitionally UP (going down), unchecked or transitionally DOWN (going up) -> fastinter
- down -> downinter
It allows to set something like:
server sr6 127.0.51.61:80 cookie s6 check inter 10000 downinter 20000 fastinter 500 fall 3 weight 40
In the above example haproxy uses 10000ms between checks but as soon as
one check fails fastinter (500ms) is used. If server is down
downinter (20000) is used or fastinter (500ms) if one check pass.
Fastinter is also used when haproxy starts.
New "timeout.check" variable was added, if set haproxy uses it as an additional
read timeout, but only after a connection has been already established. I was
thinking about using "timeout.server" here but most people set this
with an addition reserve but still want checks to kick out laggy servers.
Please also note that in most cases check request is much simpler
and faster to handle than normal requests so this timeout should be smaller.
I also changed the timeout used for check connections establishing.
Changes from the previous version:
- use tv_isset() to check if the timeout is set,
- use min("timeout connect", "inter") but only if "timeout check" is set
as this min alone may be to short for full (connect + read) check,
- debug code (fprintf) commented/removed
- documentation
Compile tested only (sorry!) as I'm currently traveling but changes
are rather small and trivial.
In order to offer DoS protection, it may be required to lower the maximum
accepted time to receive a complete HTTP request without affecting the client
timeout. This helps protecting against established connections on which
nothing is sent. The client timeout cannot offer a good protection against
this abuse because it is an inactivity timeout, which means that if the
attacker sends one character every now and then, the timeout will not
trigger. With the HTTP request timeout, no matter what speed the client
types, the request will be aborted if it does not complete in time.
Add the "backlog" parameter to frontends, to give hints to
the system about the approximate listen backlog desired size.
In order to protect against SYN flood attacks, one solution is
to increase the system's SYN backlog size. Depending on the
system, sometimes it is just tunable via a system parameter,
sometimes it is not adjustable at all, and sometimes the system
relies on hints given by the application at the time of the
listen() syscall. By default, HAProxy passes the frontend's
maxconn value to the listen() syscall. On systems which can
make use of this value, it can sometimes be useful to be able
to specify a different value, hence this backlog parameter.
A new "timeout" keyword replaces old "{con|cli|srv}timeout", and
provides the ability to independantly set the following timeouts :
- client
- tarpit
- queue
- connect
- server
- appsession
Additionally, the "clitimeout", "contimeout" and "srvtimeout" values
are supported but deprecated. No warning is emitted yet when they are
used since the option is very new.
Other timeouts should follow soon now.
AIX does not know about MSG_DONTWAIT. Fortunately, nearly all sockets
are already set to O_NONBLOCK, so it's not even required to change the
code. It was only necessary to add this fcntl to the log socket which
lacked it. The MSG_DONTWAIT value has been defined to zero when unset
in order to make the code cleaner and more portable.
Also, on AIX, "hz" is defined, which causes a problem with one function
parameter in time.c. It's enough to rename the parameter there. Last,
fix a missing #include <string.h> in proxy.c.
It is very convenient for SNMP monitoring to have unique process ID,
proxy ID and server ID. Those have been added to the CSV outputs.
The numbers start at 1. 0 is reserved. For servers, 0 means that the
reported name is not a server name but half a proxy (FRONTEND/BACKEND).
A remaining hidden "-" in the CSV output has been eliminated too.
Proxy listeners were very special and not very easy to manipulate.
A proto_tcp file has been created with all that is required to
manage TCPv4/TCPv6 as raw protocols, and provide generic listeners.
The code of start_proxies() and maintain_proxies() now looks less
like spaghetti. Also, event_accept will need a serious lifting in
order to use more of the information provided by the listener.
It's not easy to report useful information to help the user quickly
fix a configuration. This patch :
- removes the word "listener" in favor of "proxy" as it has been
used since the beginning ;
- ensures that the same function (hence the same words) will be
used to report capabilities of a proxy being declared and an
existing proxy ;
- avoid the term "conflicting capabilities" in favor of "overlapping
capabilities" which is more exact.
- just report that the same name is reused in case of warnings
This patch:
- adds proxy_mode_str() similar to proxy_type_str()
- adds a generic findproxy function used with default_backend/setbe/use_backed
- rewrite default_backend/senbe/use_backed to use introduced findproxy()
- relaxes duplicated proxy check
- changes capabilities displaying from "%X" to "%s" with a call to proxy_type_str()
The stream_sock_* functions had to know about sessions just in
order to get the server's address for a connect() operation. This
is not desirable, particularly for non-IP protocols (eg: PF_UNIX).
Put a pointer to the peer's sockaddr_storage or sockaddr address
in the fdtab structure so that we never need to look further.
With this small change, the stream_sock.c file is now 100% protocol
independant.
The following patch will give the ability to tweak socket linger mode.
You can use this option with "option nolinger" inside fronted or backend
configuration declaration.
This will help in environments where lots of FIN_WAIT sockets are
encountered.
When we're interrupted by another instance, it is very likely
that the other one will need some memory. Now we know how to
free what is not used, so let's do it.
Also only free non-null pointers. Previously, pool_destroy()
did implicitly check for this case which was incidentely
needed.
The timeout functions were difficult to manipulate because they were
rounding results to the millisecond. Thus, it was difficult to compare
and to check what expired and what did not. Also, the comparison
functions were heavy with multiplies and divides by 1000. Now, all
timeouts are stored in timevals, reducing the number of operations
for updates and leading to cleaner and more efficient code.
Now fdtab can contain the FD_POLL_* events so that the pollers
which can fill them can give userful information to readers and
writers about the precise condition of wakeup.
It may be dangerous to play with fdtab before doing fd_insert()
because this last one is responsible for growing maxfd as needed.
Call fd_insert() before instead.
Some pollers such as kqueue lose their FD across fork(), meaning that
the registered file descriptors are lost too. Now when the proxies are
started by start_proxies(), the file descriptors are not registered yet,
leaving enough time for the fork() to take place and to get a new pollfd.
It will be the first call to maintain_proxies that will register them.
The notion of capabilities has been added to the proxy so that we
know whether a proxy supports frontend, backend, or rulesets. Given
this, some parameters are optionnal, some are ignored with a warning
and others are forbidden. It is now possible to write valid two level
configs without binding to dummy address/ports.
The nbconn attribute in the proxies was not relevant anymore because
a frontend A may use backend B and both of them must account for their
respective connections. For this reason, there now are two separate
counters for frontend and backend connections.
The stats page has been updated to reflect the backend, but a separate
line entry for the frontend with error counts would be good.
Note that as of now, beconn may be higher than maxconn, because maxconn
applies to the frontend, while beconn may be increased due to sessions
passed from another frontend.
The files are now stored under :
- include/haproxy for the generic includes
- include/types.h for the structures needed within prototypes
- include/proto.h for function prototypes and inline functions
- src/*.c for the C files
Most include files are now covered by LGPL. A last move still needs
to be done to put inline functions under GPL and not LGPL.
Version has been set to 1.3.0 in the code but some control still
needs to be done before releasing.
