This patch settles the 2 loggers limitation.
Loggers are now stored in linked lists.
Using "global log", the global loggers list content is added at the end
of the current proxy list. Each "log" entries are added at the end of
the proxy list.
"no log" flush a logger list.
Ludovic Levesque reported and diagnosed an annoying bug. When a server is
configured to track another one and has a slowstart interval set, it's
assigned a minimal weight when the tracked server goes back up but keeps
this weight forever.
This is because the throttling during the warmup phase is only computed
in the health checking function.
After several attempts to resolve the issue, the only real solution is to
split the check processing task in two tasks, one for the checks and one
for the warmup. Each server with a slowstart setting has a warmum task
which is responsible for updating the server's weight after a down to up
transition. The task does not run in othe situations.
In the end, the fix is neither complex nor long and should be backported
to 1.4 since the issue was detected there first.
When reading the code, the "tracked" member of a server makes one
think the server is tracked while it's the opposite, it's a pointer
to the server being tracked. This is particularly true in constructs
such as :
if (srv->tracked) {
Since it's the second time I get caught misunderstanding it, let's
rename it to "track" to avoid the confusion.
For a long time, the max number of headers was taken as a part of the buffer
size. Since the header size can be configured at runtime, it does not make
much sense anymore.
Nothing was making it necessary to have a static value, so let's turn this into
a tunable with a default value of 101 which equals what was previously used.
It makes no sense to have one pointer to the hdr_idx pool in each proxy
struct since these pools do not depend on the proxy. Let's have a common
pool instead as it is already the case for other types.
By default, pipes are the default size for the system. But sometimes when
using TCP splicing, it can improve performance to increase pipe sizes,
especially if it is suspected that pipes are not filled and that many
calls to splice() are performed. This has an impact on the kernel's
memory footprint, so this must not be changed if impacts are not understood.
Struct sockaddr_storage is huge (128 bytes) and severely impacts the
cache. It also displaces other struct members, causing them to have
larger relative offsets. By moving these few occurrences to the end
of the structs which host them, we can reduce the code size by no less
than 2 kB !
Stream interfaces used to distinguish between client and server addresses
because they were previously of different types (sockaddr_storage for the
client, sockaddr_in for the server). This is not the case anymore, and this
distinction is confusing at best and has caused a number of regressions to
be introduced in the process of converting everything to full-ipv6. We can
now remove this and have a much cleaner code.
This patch introduces hdr_len, path_len and url_len for matching these
respective parts lengths against integers. This can be used to detect
abuse or empty headers.
These requests are mainly monitor requests, as well as stats requests when
the stats are processed by the frontend. Having this counter helps explain
the difference in number of sessions that is sometimes observed between a
frontend and a backend.
We now measure the work and idle times in order to report the idle
time in the stats. It's expected that we'll be able to use it at
other places later.
We already had the ability to kill a connection, but it was only
for the checks. Now we can do this for any session, and for this we
add a specific flag "K" to the logs.
The stats socket now allows the admin to disable, enable or shutdown a frontend.
This can be used when a bug is discovered in a configuration and it's desirable
to fix it but the rules in place don't allow to change a running config. Thus it
becomes possible to kill the frontend to release the port and start a new one in
a separate process.
This can also be used to temporarily make haproxy return TCP resets to incoming
requests to pretend the service is not bound. For instance, this may be useful
to quickly flush a very deep SYN backlog.
The frontend check and lookup code was factored with the "set maxconn" usage.
This one enforces a per-process connection rate limit, regardless of what
may be set per frontend. It can be a way to limit the CPU usage of a process
being severely attacked.
The side effect is that the global process connection rate is now measured
for each incoming connection, so it will be possible to report it.
This option permits to change the global maxconn setting within the
limit that was set by the initial value, which is now reported as the
hard maxconn value. This allows to immediately accept more concurrent
connections or to stop accepting new ones until the value passes below
the indicated setting.
The main use of this option is on systems where many haproxy instances
are loaded and admins need to re-adjust resource sharing at run time
to regain a bit of fairness between processes.
Trailing spaces after headers were not trimmed, only the leading ones
were. An issue was detected today with a content-length value which
was padded with spaces and which was rejected. Recent updates to the
http-bis draft made it a lot more clear that such spaces must be ignored,
so this is what this patch does.
It should be backported to 1.4.
Many inet_ntop calls were partially right, which was hard to detect given
the complex combinations. Some of them were relying on the listener's proto
instead of the address itself, which could have been different when dealing
with an accept-proxy connection.
The new addr_to_str() function does the dirty job and returns the family, which
makes it particularly suited to calls from switch/case statements. A large number
of if/else statements were removed and the stats output could even be cleaned up
in the case of session dump.
As a side effect of doing this, the resulting code is smaller by almost 1kB.
All changed parts have been tested and provided expected output.
Some older libc don't define splice() and and don't define _syscall*()
either, which causes build errors if splicing is enabled.
To solve this, we now split the syscall redefinition into two layers :
- one file per syscall (epoll, splice)
- one common file to declare the _syscall*() macros
The code is cleaner because files using the syscalls just have to include
their respective file. It's not adviced to merge multiple syscall families
into a same file if all are not intended to be used simultaneously, because
defining unused static functions causes warnings to be emitted during build.
As a result, the new USE_MY_SPLICE parameter was added in order to be able
to define the splice() syscall separately.
If "option forwardfor" has the "if-none" argument, then the header is
only added when the request did not already have one. This option has
security implications, and should not be set blindly.
Manoj Kumar reported a case where haproxy would crash upon start-up. The
cause was an "http-check expect" statement declared in the defaults section,
which caused a NULL regex to be used during the check. This statement is not
allowed in defaults sections precisely because this requires saving a copy
of the regex in the default proxy. But the check was not made to prevent it
from being declared there, hence the issue.
Instead of adding code to detect its abnormal use, we decided to implement
it. It was not that much complex because the expect_str part was not used
with regexes, so it could hold the string form of the regex in order to
compile it again for every backend (there's no way to clone regexes).
This patch has been tested and works. So it's both a bugfix and a minor
feature enhancement.
It should be backported to 1.4 though it's not critical since the config
was not supposed to be supported.
Adding health checks has become a real pain, with cross-references to all
checks everywhere because they're all a single bit. Since they're all
exclusive, let's change this to have a check number only. We reserve 4
bits allowing up to 16 checks (15+tcp), only 7 of which are currently
used. The code has shrunk by almost 1kB and we saved a few option bits.
The "dispatch" option has been moved to px->options, making a few tests
a bit cleaner.
This patch provides a new "option redis-check" statement to enable server health checks based on redis PING request (http://www.redis.io/commands/ping).
This global task is used to periodically check for end of resource shortage
and to try to enable queued listeners again. This is important in case some
temporary system-wide shortage is encountered, so that we don't have to wait
for an existing connection to be released before checking the queue again.
For situations where listeners are queued due to the global maxconn being
reached, the task is woken up at least every second. For situations where
a system resource shortage is detected (memory, sockets, ...) the task is
woken up at least every 100 ms. That way, recovery from severe events can
still be achieved under acceptable conditions.
This was revealed with one of the very latest patches which caused
the listener_queue not to be initialized on the stats socket frontend.
And in fact a number of other ones were missing too. This is getting so
boring that now we'll always make use of the same function to initialize
any proxy. Doing so has even saved about 500 bytes on the binary due to
the avoided code redundancy.
No backport is needed.
This function is finally not needed anymore, as it has been replaced with
a per-proxy task that is scheduled when some limits are encountered on
incoming connections or when the process is stopping. The savings should
be noticeable on configs with a large number of proxies. The most important
point is that the rate limiting is now enforced in a clean and solid way.
Those states have been replaced with PR_STFULL and PR_STREADY respectively,
as it is what matches them the best now. Also, two occurrences of PR_STIDLE
in peers.c have been removed as this did not provide any form of error recovery
anyway.
All listeners that are limited by a proxy-specific resource are now
queued at the proxy's and not globally. This allows finer-grained
wakeups when releasing resource.
When an accept() fails because of a connection limit or a memory shortage,
we now disable it and queue it so that it's dequeued only when a connection
is released. This has improved the behaviour of the process near the fd limit
as now a listener with a no connection (eg: stats) will not loop forever
trying to get its connection accepted.
The solution is still not 100% perfect, as we'd like to have this used when
proxy limits are reached (use a per-proxy list) and for safety, we'd need
to have dedicated tasks to periodically re-enable them (eg: to overcome
temporary system-wide resource limitations when no connection is released).
When a listeners encounters a resource shortage, it currently stops until
one re-enables it. This is far from being perfect as it does not yet handle
the case where the single connection from the listener is rejected (eg: the
stats page).
Now we'll have a special status for resource limited listeners and we'll
queue them into one or multiple lists. That way, each time we have to stop
a listener because of a resource shortage, we can enqueue it and change its
state, so that it is dequeued once more resources are available.
This patch currently does not change any existing behaviour, it only adds
the basic building blocks for doing that.
Managing listeners state is difficult because they have their own state
and can at the same time have theirs dictated by their proxy. The pause
is not done properly, as the proxy code is fiddling with sockets. By
introducing new functions such as pause_listener()/resume_listener(), we
make it a bit more obvious how/when they're supposed to be used. The
listen_proxies() function was also renamed to resume_proxies() since
it's only used for pause/resume.
This patch is the first in a series aiming at getting rid of the maintain_proxies
mess. In the end, proxies should not call enable_listener()/disable_listener()
anymore.
Patch af5149 introduced an issue which can be detected only on out of
memory conditions : a LIST_DEL() may be performed on an uninitialized
struct member instead of a LIST_INIT() during the accept() phase,
causing crashes and memory corruption to occur.
This issue was detected and diagnosed by the Exceliance R&D team.
This is 1.5-specific and very recent, so no existing deployment should
be impacted.
Never add connections allocated to this sever to a stick-table.
This may be used in conjunction with backup to ensure that
stick-table persistence is disabled for backup servers.
apsession_refresh() and apsess_refressh are only used inside apsession.c
and thus can be made static.
The only use of apsession_refresh() is appsession_task_init().
These functions have been re-ordered to avoid the need for
a forward-declaration of apsession_refresh().
If a connection is closed by because the backend became unavailable
then log 'D' as the termination condition.
Signed-off-by: Simon Horman <horms@verge.net.au>
This adds the "on-marked-down shutdown-sessions" statement on "server" lines,
which causes all sessions established on a server to be killed at once when
the server goes down. The task's priority is reniced to the highest value
(1024) so that servers holding many tasks don't cause a massive slowdown due
to the wakeup storm.
The motivation for this is to allow iteration of all the connections
of a server without the expense of iterating over the global list
of connections.
The first use of this will be to implement an option to close connections
associated with a server when is is marked as being down or in maintenance
mode.
* The declaration of peer_session_create() does
not match its definition. As it is only
used inside of peers.c make it static.
* Make the declaration of peers_register_table()
match its definition.
* Also, make all functions in peers.c that
are not also in peers.h static
Bashkim Kasa reported that the stats admin page did not work when colons
were used in server or backend names. This was caused by url-encoding
resulting in ':' being sent as '%3A'. Now we systematically decode the
field names and values to fix this issue.
It's more expensive to call splice() on short payloads than to use
recv()+send(). One of the reasons is that doing a splice() involves
allocating a pipe. One other reason is that the kernel will have to
copy itself if we try to splice less than a page. So let's fix a
short offset of 4kB below which we don't splice.
A quick test shows that on chunked encoded data, with splice we had
6826 syscalls (1715 splice, 3461 recv, 1650 send) while with this
patch, the same transfer resulted in 5793 syscalls (3896 recv, 1897
send).
There are some very rare server-to-server applications that abuse the HTTP
protocol and expect the payload phase to be highly interactive, with many
interleaved data chunks in both directions within a single request. This is
absolutely not supported by the HTTP specification and will not work across
most proxies or servers. When such applications attempt to do this through
haproxy, it works but they will experience high delays due to the network
optimizations which favor performance by instructing the system to wait for
enough data to be available in order to only send full packets. Typical
delays are around 200 ms per round trip. Note that this only happens with
abnormal uses. Normal uses such as CONNECT requests nor WebSockets are not
affected.
When "option http-no-delay" is present in either the frontend or the backend
used by a connection, all such optimizations will be disabled in order to
make the exchanges as fast as possible. Of course this offers no guarantee on
the functionality, as it may break at any other place. But if it works via
HAProxy, it will work as fast as possible. This option should never be used
by default, and should never be used at all unless such a buggy application
is discovered. The impact of using this option is an increase of bandwidth
usage and CPU usage, which may significantly lower performance in high
latency environments.
This change should be backported to 1.4 since the first report of such a
misuse was in 1.4. Next patch will also be needed.
This status code is used in response to requests matching "monitor-uri".
Some users need to adjust it to fit their needs (eg: make some strings
appear there). As it's already defined as a chunked string and used
exactly like other status codes, it makes sense to make it configurable
with the usual "errorfile", "errorloc", ...
